I have c# outlook addin created in visual studio 2013.
It has windows forms also.
I am getting mad on generating msi file, any easier solution/steps for me, please ?
Mainly tell me, after completing the process, where do I find the final MSI file (like bin/release folder) ?
I installed this - https://visualstudiogallery.msdn.microsoft.com/9abe329c-9bba-44a1-be59-0fbf6151054d
as well as installshield limited edition installer.
I was able to build it and ran the installation file(.exe) from disks folder and it is installing but not showing anything in the outlook.
Take a look at the Deploying an Office Solution section in MSDN. It describes two possible options for deploying your Office solution in depth:
Deploying an Office Solution by Using Windows Installer
Deploying an Office Solution by Using ClickOnce
It is up to you which way is to choose.
I was able to build it and ran the installation file(.exe) from disks folder and it is installing but not showing anything in the outlook.
There are multiple reasons why you don't see your add-in in Office applications.
First of all, make sure that you did all the steps described in the previously mentioned articles. Then I'd suggest checking the required windows registry keys for COM add-ins, see Registry Entries for Application-Level Add-Ins for more information.
Microsoft Office applications can disable add-ins that behave unexpectedly. If an application does not load your add-in, the application might have hard disabled or soft disabled your add-in.
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
Soft disabling can occur when an add-in produces an error that does not cause the application to unexpectedly close. For example, an application might soft disable an add-in if it throws an unhandled exception while the Startup event handler is executing.
You can read more about that in the How to: Re-enable an Add-in That Has Been Disabled article in MSDN.
Finally, you may also check out the Trust Center settings in Outlook. The Macro Security settings can be applied to add-ins as well. May be it is required to sign the add-in with a digial signature and etc.
Related
We've created an Outlook add-in which integrates our custom CRM with Outlook. A command button is added to messages in read and compose mode. A function file is called on the button click.
The add-in manifest passes validation and installs properly on all machines. However on Outlook 2016 desktop (only) we are seeing an error on some machines. The exact error message says: “We’re sorry, we couldn’t access [NCS Outlook Add-in]. Make sure you have a network connection. If the problem continues, please try again later.” ([NCS Outlook Add-In] is the name of our add-in.)
Note that this message appears IMMEDIATELY after clicking the add-in command button. It does not first say “[NCS Outlook Add-in] is working on your request” like it add-ins do when an error has occurred.
We have tried Outlook logging and haven't found anything useful in the logs. We've checked settings and disabled other add-ins. We have also tested across machines with user accounts. The same user will have the error on one machine and not the other. In short, it seems that the error is machine specific and not profile related.
Version of Office 365 installed: 1705 (Build 8201.2209).
We experienced this exact behavior in Outlook 2016, the solution was to enable protected mode for the restricted and internet zones.
The easiest way to change this is in IE.
In Internet Explorer, click the Tools button, and then click Internet Options.
Click the Security tab, and then select the Restricted Sites Zone.
Select the Enable Protected Mode check box, and then click OK.
Restart Internet Explorer.
Here is a little more information:
https://support.microsoft.com/en-us/help/2761180/apps-for-office-don-t-start-if-you-disable-protected-mode-for-the-rest
Try this:
1) Close Outlook
2) Rename the folder C:\Users\%USERNAME%\AppData\Local\Microsoft\Outlook
to C:\Users\%USERNAME%\AppData\Local\Microsoft\Outlook.OLD
(Where %USERNAME% is current User Name.)
3) Start Outlook, Setup User Profile
4) Add/Test Add-In.
If that works, then something broken on old Outlook profile. But if same problem: Exit Outlook, delete the Outlook folder and rename Outlook.OLD back to Outlook.
I ran into this exact same problem after uninstalling Visual Studio 2015 on my development machine. (I had been using Visual Studio 2017 for Outlook add-in development.)
The problem went away as soon as I reinstalled Visual Studio 2017. The Outlook 2016 installation had nothing to do with the problem, I never changed Outlook or its profile at all.
This would indicate that the problem is somehow related to the SDK tooling on the machine...perhaps something to do with the .Net framework?
If I ran into this problem on a customer machine I would try reinstalling or repairing the .Net framework, or perhaps reinstalling Outlook (assuming it contains some add-in tooling that is broken.)
Just passing this on in case it helps anyone else.
This is a very strange situation that I am in; scratching my head for answers.
I have developed an outlook addin that works perfectly on my dev machine and on about 90 % of the clients machines.
The load behavior of the addin is 3.
On 10% of the users, outlook starts up without loading the addin despite the load behaviour being 3. The user can manually make the addin active by going to the addin manager on outlook but after a restart this addin reverts back to being inactive bbut load behavior never changes from 3.
I used Install Shield LE to package this addin. I don't even know where to debug anymore, I tried changing different load behaviour values but still the same outcome. The addin just won't load on startup with this set of users.
The company uses ZenWorks to automatically install the addin on all the PCs from the MSI i generate using install shield.
One weird thing is, If i go to the installation directory of the addin and install the addin using the .vsto deployment file, it works and gets loaded on outlook (but thats makes it two addins installed).
I also checked the Resiliency section on the registry and the addin isn't there.
I have faced this issue. To solve this, you need to manually delete the registry entries from the following path.
Open registry editor and go to HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\<Your add-in> and change the LoadBehavior to 3.
If the above registry entry is not found, then look for HKEY_CURRENT_USER\Software\Wow6432Node\Microsoft\Office\Outlook\Addins\<Your add-in> and change the LoadBehavior to 3.
Go to HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Resiliency – remove the REG_BINARY keys found in DisabledItems and CrashingAddinList
where 15.0 is for outlook 2013.
If you are using 2010 outlook, replace 15.0 by 14.0 and for Outlook 2016 replace 15.0 by 16.0
Hope this helps.
We have developed a custom outlook addin which has a log file for logging. For installation, we are using .msi installer created using installshield. Installation is successful and functionalities are good except logging. There is only one entry in the log file after installation, rest of the actions are not logging as expected. But the same is fine, if we install the addin using .exe installer created using 'publish' option in VisualStudio 2010. As .msi is the expected installer, any help in fixing this issue is appreciated.
Saravanan,
Make sure that you did all the steps described in the Deploying an Office Solution by Using Windows Installer article.
Is your add-in loaded by Outlook? Did you have a chance to check out the Disabled Items list?
The fact is that Outlook can disable add-ins that behave unexpectedly. If an application does not load your add-in, the application might have hard disabled or soft disabled your add-in.
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
Soft disabling can occur when an add-in produces an error that does not cause the application to unexpectedly close. For example, an application might soft disable an add-in if it throws an unhandled exception while the Startup event handler is executing.
When you re-enable a soft-disabled add-in, the application immediately attempts to load the add-in. If the problem that initially caused the application to soft disable the add-in has not been fixed, the application will soft disable the add-in again.
Also Outlook 2013 monitors add-in performance metrics such as add-in startup, shutdown, folder switch, item open, and invoke frequency. Outlook records the elapsed time in milliseconds for each performance monitoring metric.
For example, the startup metric measures the time required by each connected add-in during Outlook startup. Outlook then computes the median startup time over 5 successive iterations. If the median startup time exceeds 1000 milliseconds (1 second), then Outlook disables the add-in and displays a notification to the user that an add-in has been disabled. The user has the option of always enabling the add-in, in which case Outlook will not disable the add-in even if the add-in exceeds the 1000 millisecond performance threshold.
I know this has been asked before, but I've never found a solution to this. I created an Addin in Visual Studio for Outlook 2007. I created an Installer and copied the files and created the registry values. It installs perfectly on the developer computer and it uninstalls perfectly as well. But on the second computer, which is also Windows 7 32bit and Office 2007, the registry key LoadBehavior is always reset to 2 when Outlook opens. I edit it to say 3 and it just resets to 2 again. No error message or anything. This also happened on my computer at work.
Now, I did read something about this guy that tried installing Visual Studio on the computer and it would run just fine after. Made me think I need some other .NET library or something?
Why does this happen and has anyone ever found a solution?
In my case this turned out to be caused by an issue in a license protection wrapper from a third-party vendor. The issue has apparently been fixed in more recent versions of that product (contact me in private if you need more details).
Also, watch out for message boxes shown during Outlook startup. Outlook is really sensitive to those and AFAICT it has only gotten worse with Outlook 2010, especially under Windows 7.
Also, see this question of mine for links to a MS blog entry about this.
Can someone give me a quick explanation of when I would use Visual Studio 2008 Outlook 2007 Ad-In project type? and how would that compare to developing a bunch of outlook macros directly in outlook?
Basically, I want to have some sort of application read email (with attachments) from a pop3 email box, do some filtering/editing/validation of the subject/sender/content and then if certain conditions are met, save the attachments to a local file, and then add an entry into an SQL server database table (i.e. date/sender/subject/message).
Seems there are at least 10 different ways to do this....so between an outlook macro and a VS Office Project, how do I pick?
I am not clear, if I create this solution as a Visual Studio outlook add-in, where does it run? Is it loaded into outlook, does it run as a separate process and communicates back and forth with outlook? if outlook is not running, does it start it?
An Outlook Add-on is a compiled component that uses the Outlook API to perform the tasks you need. A macro/VB script is an interpreted script that actually uses the same API. The add-on approach is better if you want to deploy your functionality.
When you work on an Outlook add-on in Visual Studio, you'll be creating a .NET component, which integrates into the Outlook application, which is written in C++ so uses COM. You'll have to be careful about managed/unmanaged types and releasing objects you retrieve from Outlook.
I have recently completed just such a tool, but I chose to use Add-in Express (http://www.add-in-express.com/). These guys provide a layer of abstraction over the [challenging] Outlook API and also provide some excellent support if you're stuck.
In my case, with Add-in Express, I "run" by setting Outlook as the application command to run, in the Project properties. Add-in Express sorts out the installation of the add-on within Outlook. So when I press "Run", Outlook starts and my add-in is displayed, which may be debugged in the normal fashion. I'm not sure how VSTO (Visual Studio Tools for Office) works in this respect - or at least, I can't remember.
This is an example of an outlook add-in..
Personally, I don't see macros distributable.