On OSX I followed the installation instructions of boot2docker and am able to build and run Debian containers. However, the documentation states that the host (osx) should have a docker0 interface, binding the container with the host.
However:
$ ifconfig docker0
ifconfig: interface docker0 does not exist
How do I create the docker0 interface on osx?
My goal is to communicate with an open db port on the host machine.
You should use boot2docker ssh to login your virtual machine first.
Boot2docker install virtualbox in your osx and boot a debian distribution on it. And your docker is installed in your virtual machine.
If you want to directly access the containers IP (172.17.0.0/16) which you can retrieve by typing docker inspect <container_id>.
You must have to add the routes from the boot2docker VM by typing sudo route -n add 172.17.0.0/16 $(boot2docker ip)
Then your containers are directly available on your host
Related
TL;DR: How do I create or link a Docker socket at /var/run/docker.sock at my host for a Docker Machine instance?
On my Mac, I installed Docker and Docker Machine using Homebrew:
brew install docker docker-machine
I also installed docker-machine-driver-vmware to create a Docker Machine instance based on my hypervisor:
brew install docker-machine-driver-vmware
docker-machine create --driver vmware default
My problem is that I have an application that relies on the Docker socket to create containers, but I cannot find the Docker socket anywhere in my system.
How do I find the Docker socket, and how can I change it or link it to /var/run/docker.sock?
I installed the latest stable docker for Mac, and started the docker directly without a virtual box. I know that it must have started a virtual box, so I use "docker-machine ls" to find the default machine, but it list nothing. How can i find the virtual machine? My OS version is 10.10.5
PS:
In fact, I didn't create any virtual machines, but do run my spring-boot app on the "alpine-oraclejdk8" image, so does that mean I exactly using the docker? And the reason I want to find the virtual machine is I used "nsenter" to enter the container to debug the log of my app but it doesn't work(the writer of "nsenter" told that I need enter the virtual machine first). So this is my confusing point that how the docker is running but I cant find the virtual machine on MAC
Docker for mac does not use docker-machine. The app that runs and give you the little whale icon in the top menu bar runs its own virtual machine. This virtual machine uses hyperkit, which is a project that uses xhyve, which is a port of bhyve to the mac os darwin kernel.
This will not create any entries to make docker-machine aware of the vm.
Rather than using nsenter to enter your container, you should use the docker exec command instead. The advantage of using docker exec is that it works without having the first ssh to where docker is running.
Because you need to create it.
Run the command
docker-machine create vm1
And you'll have your machine.
To redirect your docker client to the specific machine use this command
eval $(docker-machine env vm1)
Where 'vm1' is the same 'vm1' name that you used to create the machine. You can have a number of docker machine running at the same time using various backends like virtualbox or aws
I'm just setting up docker on my Mac. The installation worked and I got some containers running (following the getting-stared guide), but now I want to connect with my browser to localhost, to show a web app.
For that I'm following this guide: https://docs.docker.com/engine/userguide/containers/usingdocker/
In the last section it is said, that you simple go with your browser to: localhost:XXXXX wheras XXXXX is the port, that you found out using the command
docker ps -l
First problem: here nothing happends. The browser is showing an empty page (ERR_CONNECTION_REFUSED)
Further more in the guide it is explained, that for Mac you can check your ip address via the command:
docker-machine ip your_vm_name
Here appears the second problem: This command results in an error-message:
Host does not exist: "your_vm_name"
So my questions are:
How to set up the virtual machine (or "your_vm_name" respectively)?
Does it have to do anything with the vhosts file on my Mac OS?
Is there mybe a conflict with MAMP (which I'm also using sometimes)?
Thanks in advance!
And thanks to GianArb for the very fast answer! That solution works as well.
Just to contribute to the community, I just found out by myself, that the solution was too simple to be true.
Instead of your-vm-name use default (obviously the default-host that is set up by docker), so I just used:
docker-machine ip default
and then I got the right IP.
Hello the process to start to use docker on mac with docker-machine is like:
Create a new docker machine on virtualbox, you can use a name like "your_vm_name" or just "default" in this way you can not use the name because "default" is a keyword that docker-machine try to use when you don't specify nothing.
The problem here is, why docker-machine ip your_vm_name doesn't provide the good ip? Can you copy the result of your command
echo $DOCKER_HOST
Usually it's 192.168.99.100
thanks a lot
Actual for Mac OS:
If there is no real need in VirtualBox machine you can just remove it.
Docker can start Linux containers under Mac OS without any VirtualBox machines.
Without any VirtualBox machines, all exported ports are available on the localhost:*.
Remove docker machine
docker-machine ls
docker-machine stop default
docker-machine rm default
Make sure that you don't have the command eval $(docker-machine env ...) in your ~/.bashrc or ~/.zshrc.
Otherwise, nothing will work. You will see the error Error: No machine name(s) specified and no "default" machine exists.
By the default configuration no need to have any env variables like $DOCKER_*
In my case, the only docker installed by downloading a .dmg image from the official site works without any problems. Any versions installed via brew didn't work out of the box.
PS: tested on Mac OS 10.13 and 10.14
I would like to open a docker port running on a mac Osx to other computer on the same network.
I've found some work around but only with boot2docker not toolbox.
And not the simple -p or -P. I would like to access to the docker port running on a MacOsx from an other computer on the same network.
Regards and thanks
Port forwarding should work exactly the same way as with boot2docker.
VBoxManage controlvm "<name_of_your_vm>" natpf1 "tcp-port8000,tcp,,8000,,8000";
Then you should be able to access port 8000 under
localhost:8000
and from different computer in the same network
<ip_of_you_machine>:8000
For more information check this boot2doicker github page Workarounds
I've installed boot2docker (full install) on Windows 7 and am trying to run the container port redirection demo:
docker run --rm -i -t -p 80:80 nginx
Which looks like it isn't quite finishing properly, it just stops and looks like this:
When I open another git bash shell and run boot2docker ip I get 192.168.59.103, and when I pop that in chrome I get Error code: ERR_CONNECTION_TIMED_OUT
It works fine for me with plain docker on Ubuntu 14.04. What else do I need to do to make it work with boot2docker on windows?
Looking more closely, my problem is the same as this question: Docker, can't reach “rails server” development from localhost:3000 using docker flag -p 3000:3000
The answer to that question that worked for me was this one, which simply says to run
boot2docker ssh -L 8080:localhost:80
at the terminal before starting boot2docker
In my case I do this (from a git bash terminal):
boot2docker init # from https://github.com/boot2docker/boot2docker
boot2docker up
boot2docker ssh -L 8787:localhost:8787 # sets up port forwarding and starts boot2docker
docker run -d -p 8787:8787 cboettig/rstudio # starts the container I want
then go to my web browser in windows and point it to http://localhost:8787/ and I get a server instance of RStudio. When I'm done:
docker rm -f $(docker ps -a -q) # delete all containers
UPDATE: downgrading to an earlier version of VirtualBox will fix this
After struggling with folder sharing I regressed through previous versions of VirtualBox and found that with version 4.3.12 I could enable folder sharing and have the port forwarded exactly according to the official instructions, that is I could access my docker container at 192.168.59.103. So downgrading VirtualBox is another option for working around this problem.
ANOTHER UPDATE: updating to the new release of v1.3.1 of boot2docker will fix this
This release just came out a week ago and includes VirtualBox Guest Additions, which simplifies all of this. I now simply do
boot2docker ssh # start boot2docker
docker run -d -p 8787:8787 -v /c/Users/foobar:/home/rstudio/foobar rocker/rstudio
And I get everthing working as expected and can log into RStudio in my browser at http://localhost:8787/ (linux) or http://192.168.59.103:8787 (Windows) and it just works.
In this case I've also got folder sharing working with, /c/Users/foobar corresponding to an existing folder on my computer at C:/Users/foobar, and foobar can be anything. With this method I can read and write files both ways between Windows and RStudio and I don't need to connect to a special IP address like the samba method does in the official docs
I had this problem too after a couple of failed attempts to boot2docker start. This created multiple entries of host-only networks configured on VirtualBox (VirtualBox Host-Only Ethernet Adapter #2, VirtualBox Host-Only Ethernet Adapter #3), and probably the boot2docker's VM was using a bad one.
I cleaned up using Virtualbox standard UI, leaving only one of the networks and now everything works fine.
I'm using boot2docker 1.5.0.
Just to register something that happened to me, and made me lose a couple of hours.