I tried to execute JMeter 4.0 from the command prompt in Windows 7.
I got the following error during execution:
The JMETER_HOME environment variable is not defined correctly This
environment variable is needed to run this program
I set C:\apache-jmeter-4.0\bin to JMETER_HOME variable, but the problem remains
I can start JMeter with its jar file.
I use jdk1.8.0_162 and set JAVA_HOME environment variable correctly.
You should set JMETER_HOME to main JMeter directory as C:\apache-jmeter-4.0
Also don't set JMeter directory to JAVA_HOME variable (should hold Java installation path)
Ensure you have installed Java and JMETER Gui works fine first.
Then,
At User Variables add JMETER_HOME followed by D:\Jmeter (Where Jmeter is installed)
Next select Path in User variables and add D:\Jmeter\bin(Where Jmeter bin path is)
Save and restart cmd.
P.S: This is for Windows solution
First ensure you've Java installed
Second you need to ensure the working directory of your call is the JMeter installation directory.
Assumption your JMeter installation is located under:
C:\Program Files (x86)\apache-jmeter-4.0
then you need to set this as working directory.
As you can read in the jmeter.bat file itself:
JMETER_HOME - installation directory. Will be guessed from location of jmeter.bat
This might sound obvious, but I'm getting this error on machines that don't have Java installed. Of course, though a better message might have been nice!
Easiest way:
just delete the JMETER_HOME environment variable, run jmeter.bat and variable will be added automatically.
Asually a wrong JMETER_HOME entry causes this. make sure you have JMETER_HOME pointed to jmeter folder not inside bin directory. For example ,from my local windows i am able to see this thie environment variable
Type : echo %JMETER_HOME%
For me, setting the Windows environment variable didn't help. Instead it worked when I set the variable at the command line (using the root folder of jmeter).
Like this:
SET JMETER_HOME=C:\apache-jmeter-4.0
ensure java is installed and can check with java —version
assuming the path jmeter installed is C:\apache-jmeter-5.3
add the user variable
press new
add Jmeter variable name as JMETER_HOME
variable value as: C:\apache-jmeter-5.3
add the path
look for Path system variable and press edit
edit it to have C:\apache-jmeter-5.3\bin
it doesnt have Path(very unlikely), than press new and add variable name as path and value as C:\apache-jmeter-5.3\bin
restart cmd and type jmeter should do the job.
One reason for getting this error is to have JMETER_HOME variable defined in the environment variables but pointing to the wrong location. I had this problem due to previous installation.
You don't need to set JMETER_HOME path explicitly under user variables, just add/change under system variables under path variable as your bin path. If you already have earlier version of JMeter just append with latest version. Path looks like : C:\XXX\apache-jmeter-4.0\bin
I am trying to configure the "Run Settings" on Qt Creator 3.0.1.
I would like to set the value of many environment variables by sourcing a shell script 'myScript'.
However, Deployment's Custom Process Step apparently doesn't accept 'source' as a command.
If I execute the script instead of sourcing it, it sets the environment variables of the shell process in which it is executed, which is not the same where Qt Creator runs the executable.
Is it possible to use 'myScript' to configure the environment variables ? How should I call it?
Ofcorse, You can run qt via scrypt. This is very simply. My script is below. Ofcorse you need environment variables in concret file. In my case this file is environment-setup
#!/bin/bash
echo "ustawienie zmiennej /usr/local/angstrom/arm/environment-setup"
# set concret variables important is . /
. /usr/local/angstrom/arm/environment-setup
echo "Uruchomienie qtCreator"
# lunched qtcreator
$HOME/Qt/Tools/QtCreator/bin/qtcreator
You also can set this script as linked to main icon qt in your start menu. After this, all you need to run qt is only click in your shortcut in menu
I think currently there's no proper way to set QtCreator build environment variables using a script. For example in this guide by ICS three options are mentioned in the "Set Up the Environment" section:
1. You can always start Qt Creator in the same shell/console session where you previously ran the environment setup script (i.e. /opt/poky/2.2.1/environment-setup-armv5e-poky-linux-gnueabi). This option is the easiest, but means that you can’t simply launch Qt Creator from a desktop shortcut or similar method. It might also cause problems if you want to build for the desktop or another embedded platform within the same session.
2. You can add the environment variables to the kit’s settings. This option is a little more work to set up, but avoids the issues of the shell setup.
3. A third option is to add the environment variables to your project settings, but that means adding it to every project that uses the kit.
I am getting the mvn command not recognized as an internal or external command.
I have setup the M2_HOME, JAVA_HOME and added %M2_HOME%/bin to the path variable. All are system variables. Still getting the same problem.
Echoing the variables showing me the correct paths.
Path to Maven: C:\apache-maven-3.1.0\apache-maven-3.1.0
M2_HOME:C:\apache-maven-3.1.0\apache-maven-3.1.0
PATH: Other things,C:\Program Files (x86)\Java\jdk1.7.0_40\bin,C:\apache-maven-3.1.0\apache-maven-3.1.0\bin
and I have restarted my computer twice.
Right click on My Computer >> Properties >> Advanced system settings >>
System Properties window will get displayed
Under Advanced >> Environment Variables
Click on New to set Environment Variables
Variable name: JAVA_HOME
Variable value: C:\Program Files\Java\jdk1.8.0_121
Variable name: M2
Variable value: %M2_HOME%\bin
Variable name: M2_HOME
Variable value: C:\Program Files\Apache Software Foundation\apache-maven-3.5.0
Variable name: Path
Variable value: %M2_HOME%\bin
Then click on Ok, ok, ok.
Now restart you command prompt and check again with “mvn –version” to verify the mvn is running, you may restart your system also.
It should be working now.
Restart your machine, after setting up your M2_HOME (pointing to you Maven basedir, NOT the bin dir) and PATH (PATH=%M2_HOME%\bin;%PATH%).
Then do:
dir %M2_HOME%\bin\mvn*
If there is a .bat file, it should work under Windows, as it appears to be finding it. If there isn't one, then your paths are not right and you need to make sure your %PATH% variable really points to the correct path to Maven.
Make sure you are using the proper slashes for your OS. Under Windows they're \.
Write the entire maven path into the Environment PATH variable.
Example:
C:\Program Files\apache-maven-3.2.3\bin;
My PATH variable wasn't reading %M2% or %M2_HOME%\bin properly, and therefore I wrote the full path into the PATH variable.
Working.
This is worked for me:
1-download apache-maven-3.3.9-bin.tar.gz file from https://maven.apache.org/download.cgi
2-copy the folder under c:\programfiles
3-set variables as this:
M2_HOME ----- C:\Program Files\apache-maven-3.3.9
M2 ----- C:\Program Files\apache-maven-3.3.9
add Path variable to this: ;C:\Program Files\apache-maven-3.3.9\bin
then run the cmd as system admin
it worked.
I also was facing with the same issue still after adding path in environment variable and running it as a normal user in command prompt.
Then I opened command prompt and tried running as "Run as Administrator" and I was able to download all the packages with respect to the project.
Are you trying to reference a user variable in system variables? Try echo %path% and the M2 should have been fully expanded to show the file path to your Maven directory. If it hasn't, then that's the problem.
To fix it, you should create a user variable called PATH and add your %M2% reference into there.
Open Command prompt As "Run As a administrator" and try.
I have a stupid comment but someone else will have that issue. I was getting that same error when I was trying to put in ./mvnw clean package and I found out that I had to change it a bit to .\mvnw clean packageand I lived happily ever after.
Windows 10 -
Add new variable "M2_HOME" -
Update variable "path" -
Verify on cmd -
Try %M2_HOME%\bin (\ rather than /)
I faced this problem which kept me busy and buggy for quiet sometime. I was facing the problem (mvn not recognized) after setting up all required environment variables absolutely correctly. So by going by one of the response here, I switched to another version of maven and that fixed the problem.
Not being completely convinced why it worked this way, I then unzipped the problematic-version and updated env-vars which made it work.
The problem was when I initially extracted file from the zip, I modified the directory structure a bit. When you extract the zip, say apache-maven-X.x.x-bin.zip, it creates the folder structure as - "apache-maven-3.5.0-bin\apache-maven-3.5.0..."
In my first attempt I had modified this structure by deleting apache-maven-3.5.0-bin folder and bringing apache-maven-3.5.0 structure one folder up. This was causing the problem.
Try with echo %path% , if this option doesn't show your M2_HOME and others variable values as directory path, then create a new environment variable lets say PATH, and assign like below:
PATH=%JAVA_HOME%\bin;%M2_HOME%\bin
Add this in variable path=.....;%PATH%
Now open a new cmd, and try to echo %path%
it will show all thh system path
Now you can check mvn -version it will solve the problem , if not try to restart the system
P.S. as per doc, you should expend your zip distribution in C:\Program Files\Apache Software Foundation. But ideally it doen't matter
I'm using Maven 3+ version. In my case everything was fine. But while adding the M2_HOME along with bin directory, I missed the '\' at the end.
Previously it was like: %M2_HOME%\bin , which was throwing the mvn not recognizable error.
After adding "\" at the end, mvn started working fine. I guess "\" acts as pointer to next folder.
"%M2_HOME%\bin\" Should work, if you missed it.
Try setting the path of maven first through command prompt.
setpath.bat Open the cmd from the base window of the batch file.
The rest maven commands can be used once path is set through cmd.
One most important and often overlooked aspect is the %MAVEN_HOME%\bin or %M2_HOME%\bin should be the first thing in the %PATH% environment variable.
If you've already set the JAVA_HOME and M2_HOME (or MAVEN_HOME in my case) environment variables and added the \bin folder to the Path environment variable and still not working, then this solution could be for you.
Make sure that you have set your variables in the right order, your %JAVA_HOME%\bin folder should be added before the %MAVEN_HOME%\bin just like the shown image
I tried all way finally below step solved the issue .
In the downloaded zip there is file README , in that its mention that
for windows
set PATH="c:\program files\apache-maven-3.x.y\bin";%PATH%
create new PATH variable and assign first maven then %PATH%
it worked out for me .
Try It once
In your Environement variable :
new system variable:
M2_HOME Your mvn directroy "C:\......\bin"
new user variable:
M2 %M2_HOME%
edit the CLASSPATH by adding %M2%
finally open the cmd and write
path=%CLASSPATH%
enjoy
I had this same error but my problem was I had the following:
M2_HOME = C:\Program Files (x86)\Apache Software Foundation\apache-maven-2.2.1;
Which meant my PATH = %M2_HOME%\bin; (etc)
...became C:\Program Files (x86)\Apache Software Foundation\apache-maven-2.2.1;\bin
i.e. a semicolon was where it shouldn't be.
Which I discovered because Michael Ferry suggested using 'ECHO %PATH%' to see what the actual PATH output was.
I had the same problem. But just restarting my computer after setting up the Maven path resolved the issue.
Variable Name: M2_Home
Variable Value:C:\Apache\apache-maven-3.3.9
Variable Name: Path
Variable Value:C:\ProgramData\Oracle\Java\javapath;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;%JAVA_HOME%\bin\;%M2_HOME%\bin\
I faced similar problems. The article that helped me solve similar issues is by MKyong and is here: ****https://www.mkyong.com/maven/how-to-install-maven-in-windows/****
It is very important to include in maven's path the file that contains the 'bin','boot', 'conf', 'lib' etc. file folders. For example, in my case, the correct path is:
C:\Program Files\Apache Software Foundation\maven\apache-maven-3.5.0-bin\apache-maven-3.5.0
For me it was not working since I was editing Path variable in "User variable" and adding it under "System variable" made it work. Hope it helps.
For Windows you need to do the following:
Windows and type env
Open the edit environment panel
Click Environment Variables
In the system variables section, double click Path
In the dialog, create a System Variable under Path
like below ->
MVN_HOME: C:\Users<username>\Documents\Project\Software\apache-maven-3.6.3\bin
Open a new command prompt and hit mvn, you should be able to now.
I also faced the issue.
But the problem I faced was due to the location name where the maven was stored on system.
The path did contain spaces due to which system was not able to reach the path leading to this issue.
The issue got resolved for me when I moved the maven to a location which did not contain any spaces.
The existing answers are too complicated. I just fixed the same issue by
scoop install maven
That requires you install scoop the package manager for Windows in the first place.
However I recommend you install the scoop so that everything becomes easy.
Yeah so, for me, I fixed it by setting up the M2 variable.
MAVEN_HOME, JAVA_HOME and M2_HOME we set up with their paths, but the command, "mvn -verison" was still showing the error.
So I inserted one more variable, named, "M2" and then set the path of the maven folder (not the bin of the same) and ran the command in cmd.
It worked.
Adding environment variables from command prompt or windows powershell worked for me. I was able to verify the environment variables present using "set" command in command prompt.
You have written three paths above. The first path (path to maven) should be pointing to the bin directory.
Path to Maven: C:\apache-maven-3.1.0\apache-maven-3.1.0\bin;
Below are right. Above path should be corrected.
M2_HOME:C:\apache-maven-3.1.0\apache-maven-3.1.0;
PATH: Other things,C:\Program Files (x86)\Java\jdk1.7.0_40\bin,C:\apache-maven-3.1.0\apache-maven-3.1.0\bin;
I'm using Jenkins to do continuous integration builds. I have quite a few jobs that have much of the same configuration code. I'm in the midst of pulling this all out into a common script file that I'd like to run pre and post build.
I've been unable to figure out how to set some environment variables within that script, so that both the Xcode build command, and the Jenkins build can see them.
Does anyone know if this is possible?
It is not possible to do exactly what you ask. A process cannot change the environment variables of another process. The pre and post and actual build steps run in different processes.
But you can create a script that sets the common environment variables and share that script between all your builds.
The would first call your shell to execute the commands in the script and then call xcodebuild:
# Note the dot in the beginning of the next line. It is not a typo.
. set_environment.sh
xcodebuild myawesomeapp.xcodeproj
The script could look like this:
export VARIABLE1=value1
export VARIABLE2=value2
How exactly your jobs will share the script depends on your environment and use case. You can
place the script in some well-known location on the Jenkins host or
place the script in the version controlled source tree if all your jobs share the same repository or
place the script in a repository of its own and make a Jenkins build which archives the script as a build artifact. All the other jobs would then use Copy Artifact plugin to get a copy of the script from the artifacts of script job.
From Apple's Technical Q&A QA1067 it appears that if you create the file /Users/YOU/.MacOSX/environment.plist and populate it with your desired environment variables that all processes (launched by the user with the environment.plist file in their home dir) will pick up these environment variables. You may need to restart your computer (or just log out and back in) before a newly launched process will pick up the variables.
This article also claims that Xcode will also pass these variables to a build phase script. I have not tested it yet but next time I restart my MacBook I will let you know if it worked.
From http://developer.apple.com/library/mac/#/legacy/mac/library/qa/qa1067/_index.html
Q: How do I set environment for all processes launched by a specific
user?
A: It is actually a fairly simple process to set environment variables
for processes launched by a specific user.
There is a special environment file which loginwindow searches for
each time a user logs in. The environment file is:
~/.MacOSX/environment.plist (be careful it's case sensitive). Where
'~' is the home directory of the user we are interested in. You will
have to create the .MacOSX directory yourself using terminal (by
typing mkdir .MacOSX). You will also have to create the environment
file yourself. The environment file is actually in XML/plist format
(make sure to add the .plist extension to the end of the filename or
this won't work).
I have the same issue as this user: ant - not recognized as an internal
however unfortunately none of the solutions have worked for me in that post or any other. I've also looked at other commands not recognized and specifically adding a path variable. The procedure I am using is as follows:
Extract to a desired installation directory, e.g. C:\apache-ant
Create an ANT_HOME environment variable`
Open System Properties -> Advanced -> Environment Variables
Create a new system variable
Variable name: ANT_HOME
Variable value: C:\apache-ant
Add %ANT_HOME%\bin directory to the PATH system variable
Open System Properties -> Advanced -> Environment Variables
Under system variables, select PATH and append ;%ANT_HOME%\bin
e.g. %SystemRoot%\system32;%SystemRoot%;%JAVA_HOME%\bin;%ANT_HOME%\bin
Verify that ANT is installed.
Open a new command window and type:
C:\>ant -v`
In my case the Variable value is C:\apache-ant\apache-ant-1.8.2.
My exact path variable is %SystemRoot%\system32;%SystemRoot%;%JAVA_HOME%\bin;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;%JAVA_HOME%\bin;%ANT_HOME%\bin which doesn't have any spaces between semicolons.
However testing the ant installation does not work, the picture below is what I'm experiencing:
I have tried restarting on numerous occasions to no avail. I have run out of ideas, so if anyone has any any information would be helpful. Thanks!
EDIT
Posted results of dir:
ANT_HOME is not being resolved. Change %ANT_HOME%\bin in the Path system environment variable to c:\apache-ant\apache-ant-1.8.2\bin.
I had a similar issue, but the reason that %ANT_HOME% wasn't resolving is that I had added it as a USER variable, not a SYSTEM one. Sorted now, thanks to this post.
create a script including the following;
(replace the ant and jdk paths with whatever is correct for your machine)
set PATH=%BASEPATH%
set ANT_HOME=c:\tools\apache-ant-1.9-bin
set JAVA_HOME=c:\tools\jdk7x64
set PATH=%ANT_HOME%\bin;%JAVA_HOME%\bin;%PATH%
run it in shell.
When Environment variables are changed log off and log in again so that it will be applied.
I downloaded ant (http://ant.apache.org/bindownload.cgi), unzipped to my C drive, and used the windows 'doskey' command:
doskey ant=C:\apache-ant-1.9.6\bin\ant.bat $*
this will work as long as you use the same command console, to make it permanent is more difficult: http://darkforge.blogspot.com/2010/08/permanent-windows-command-line-aliases.html
Please follow these steps
In User Variables
Set VARIABLE NAME=ANT_HOME VARIABLE PATH =C:\Program Files\apache-ant-1.9.7
2.Edit User Variable PATH = %ANT_HOME%\bin
Go to System Variables
Set Path =%ANT_HOME%\bin
Had the same problem. The solution is to add a \ at the end of %ANT_HOME%\bin so it became %ANT_HOME%\bin\
Worked for me. (Should be system var)
even with the environment variables set, I found that ant -version does not work in scripts. Try call ant -version
Need to see whether you got ant folder moved by mistake or unknowingly.
It is set in environment variables.I resolved this once as mentioned below.
I removed ant folder by mistake and placed in another folder.I went to command prompt and typed "path". It has given me path as "F:\apache-ant-1.9.4\".
So I moved the ant back to F drive and it resolved the issue.
If none above helped anyone...My issue was that I was trying to use ant -version on a cmd prompt that I had already opened before I added apache-ant to the path.
As the cmd prompt was using the PATH it had when it was opened and not the new one (that had apache-ant) it wasn't finding it.
Opening a new cmd and running ant -version showed me I actually did have it installed correctly.
I got same problem , what I did for fix :
Open system environment variable
Click on environment variable
in user varaible -> edit path and then add C:\FolderWhereYouInstalled\ant\ant_1.8.4\bin
Click ok
Open cmd and type : ant -version
thanks, might help someone :)