i am trying to do a basic command of cat to a variable and it does not work..
lines="not working"
sshpass -p triltest ssh root#ILCFS 'cat /var/try/check ' > $lines
echo $lines
./script.sh: line 34: $lines: ambiguous redirect
not working
the file exists. can anyone help me please?
Use `command` or $(command). I.e.
lines=$(sshpass -p triltest ssh root#ILCFS 'cat /var/try/check ')
echo "$lines"
Related
I'm trying to run this command over multiple machines
sshpass -p 'nico' ssh -o 'StrictHostKeyChecking=no' nico#x.x.x.x "mkdir test"
The IPs are stored in the following .txt file
$ cat ips.txt
10.0.2.15
10.0.2.5
I created a bash script that reads this file line by line. If I run it with an echo:
#!/bin/bash
input="ips.txt"
while IFS= read -r line
do
echo "$line"
#sshpass -p 'nico' ssh -o 'StrictHostKeyChecking=no' nico#$line "mkdir test"
done < "$input"
It prints every line:
$ ./variables.sh
10.0.2.15
10.0.2.5
This makes me understand that the script is working as intended. However, when I replace the echo line with the command I want to run for each line:
#!/bin/bash
input="ips.txt"
while IFS= read -r line
do
#echo "$line"
sshpass -p 'nico' ssh -o 'StrictHostKeyChecking=no' nico#$line "mkdir test"
done < "$input"
It only performs the action for the first IP on the file, then stops. Why?
Managed to solve this by using a for instead of a while. Script ended up looking like this:
for file in $(cat ips.txt)
do
sshpass -p 'nico' ssh -o 'StrictHostKeyChecking=no' nico#$file "mkdir test"
done
While your example is a solution that works, it's not the explanation.
Your could find the explanation here : ssh breaks out of while-loop in bash
In two words :
"while" loop continue reading from the same file-descriptor that defined in the loop header ( $input in your case )
ssh (or sshpass) read data from stdin (but in your case from file descriptor $input). And here is the point that hide the things as we didn't exect "ssh" to read the data.
Just to understand the problem you could have same strange experience for example using commands like "ffmpeg" or "mplayer" in while loop. Mplayer and ffmpeg use the keyboards while they are running, so they will consume all the the file-descriptor.
Another good and funny example :
#!/bin/bash
{
echo first
for ((i=0; i < 16384; i++)); do echo "testing"; done
echo "second"
} > test_file
while IFS= read -r line
do
echo "Read $line"
cat | uptime > /dev/null
done < test_file
At first part we write 1st line : first
16384 lines : testing
then last line : second
16384 lines "testing" are equal to 128Kb buffer
At the second part, the command "cat | uptime" will consume exactly 128Kb buffer, so our script will give
Read first
Read second
As solution, as you did, we could use "for" loop.
Or use "ssh -n"
Or playing with some file descriptor - you could find the example in the link that I gave.
I am creating a script where I am redirecting the output of an awk command into a loop, but it's giving me this error:
sh: -c: line 3: syntax error near unexpected token `<'
sh: -c: line 3: `done < <(awk "{print}" inputfile.txt)'
I was able to run it against a different remote host, but this host is giving me an error. Does anyone know if some versions of sh/bash don't support that syntax, or know any alternatives to that syntax, or maybe spot a bug that I haven't been able to see? (I'm new to bash scripting, so even a point in the right direction would be helpful!)
Here is a pared-down version of my script that I was able to reproduce the issue on:
#!/usr/bin/env bash
host=$1
ssh $host 'while read line
do
echo "hi";
done < <(awk "{print}" inputfile.txt)'
It looks like the remote user on that host uses a shell that's not Bash to run the command, see this Q&A; a way around that is to either avoid Bashisms:
ssh "$host" 'awk "{print}" inputfile.txt \
| while IFS= read -r line; do
echo "$line"
done'
which comes with its own pitfalls, see A variable modified inside a while loop is not remembered – alternatively, you could specify that the remote host should run Bash:
ssh "$host" <<'EOF'
bash -c 'while IFS= read -r line; do
echo "$line"
done < <(awk "{print}" inputfile.txt)'
EOF
I have a small shell script as follows that I am using to login to multiple servers to capture whether the target server is using Redhat or Ubuntu as the OS version.
#!/bin/ksh
if [ -f $HOME/osver.report.txt ];then
rm -rf $HOME/osver.report.txt
fi
for x in `cat hostlist`
do
OSVER=$(ssh $USER#${x} "cat /etc/redhat-release 2>/dev/null || grep -i DISTRIB_DESCRIPTION /etc/lsb-release 2>/dev/null")
echo -e "$x \t\t $OSVER" >> osver.report.txt
done
The above script works, however, if I attempt to add in some awk as shown below and the server is a redhat server...my results in the osver.report.txt will only show the hostname and no OS version. I have played around with the quoting, but nothing seems to work.
OSVER=$(ssh $USER#${x} "cat /etc/redhat-release | awk {'print $1,$2,$6,$7'} 2>/dev/null || grep -i DISTRIB_DESCRIPTION /etc/lsb-release 2>/dev/null")
If I change the script as suggested to the following:
#!/bin/bash
if [ -f $HOME/osver.report.txt ];then
rm -rf $HOME/osver.report.txt
fi
for x in cat hostlist
do
OSVER=$(
ssh $USER#${x} bash << 'EOF'
awk '{print "$1,$2,$6,$7"}' /etc/redhat-release 2>/dev/null || grep -i DISTRIB_DESCRIPTION /etc/lsb-release 2>/dev/null
EOF
)
echo -e "$x \t\t $OSVER" >> osver.report.txt
done
Then I get the following errors:
./test.bash: line 9: unexpected EOF while looking for matching `)'
./test.bash: line 16: syntax error: unexpected end of file
You're suffering from a quoting problem. When you pass a quoted command to ssh, you effectively lose one level of quoting (as if you passed the same arguments to sh -c "..."). So the command that you're running on the remote host is actually:
cat /etc/redhat-release | awk '{print ,,,}' | grep -i DISTRIB_DESCRIPTION /etc/lsb-release
One way of resolving this is to pipe your script into a shell, rather than passing it as arguments:
OSVER=$(
ssh $USER#${x} bash <<'EOF'
awk '{print "$1,$2,$6,$7"}' /etc/redhat-release 2>/dev/null ||
grep -i DISTRIB_DESCRIPTION /etc/lsb-release 2>/dev/null
EOF
)
The use of <<'EOF' here inhibits any variable expansion in the here document...without that, expressions like $1 would be expanded locally.
A better solution would be to look into something like ansible which has built-in facilities for sshing to groups of hosts and collecting facts about them, including distribution version information.
I wrote a script to ssh to some nodes and run a sed command inside the node. The script looks like
NODES="compute-0-3"
for i in $NODES
do
echo $i
ssh $i 'sed -i \'s/172.16.48.70/172.20.54.10/g\' /etc/hosts;'
done
However, the error is
unexpected EOF while looking for matching `''
syntax error: unexpected end of file
It seems that the character ' is not treated as the begining of a sed command.
I suggest to replace
ssh $i 'sed -i \'s/172.16.48.70/172.20.54.10/g\' /etc/hosts;'
by
ssh "$i" 'sed -i "s/172.16.48.70/172.20.54.10/g" /etc/hosts'
If you absolutely want to use single quotes:
ssh "$i" 'sed -i '"'"'s/172.16.48.70/172.20.54.10/g'"'"' /etc/hosts'
I need to read the variable from a remote file over SSH and compare it. But I get a variable in the wrong format. how to do it correctly?
#!/bin/bash
pass='dpassspass'
user='root#10.10.19.18'
IP="10.2.1.41"
path=/sys/variable/serv
#not work## No such file or directory# write=$(sshpass -p $ovhpass ssh -t $user echo "$IP" > $path)
sshpass -p $pass ssh -t $user << EOF
echo "$IP" > $path
EOF
my_var=$(sshpass -p $pass ssh -t $user "cd /sys_ovh; ./serv.bash")
echo mystart-"$my_var"-myend
read=$(sshpass -p $pass ssh -t $user cat $path)
echo start-"$read"-end
echo start-"$IP"-end
if [ "$read" == "$IP" ]; then
echo "run"
fi
output:
Connection to 10.10.19.18 closed.
-myendt-10.2.1.41
Connection to 10.10.19.18 closed.
-endt-10.2.1.41
start-10.2.1.41-end
Where I make a mistake? How to take data from the SSH?
The vars my_var and read are filled with a string ending with '\r', telling echo to go back to the first column. I think this is a problem with your local script. You can correct that with
tr -d "\r" < myfile > myfile2
Your fundamental problem comes from using unquoted here documents for the commands. You should properly understand in which order the shell interprets these contructs.
ssh remote cmd >file
executes cmd remotely, but first redirects the output from the ssh command to the local file.
ssh remote "cmd >’$file'"
The quotes cause the redirection to be part of the remote command line. The variable file is interpreted first, by the local shell, though.
ssh remote 'cmd >"$file"`
The single quotes prevent the local shell from modifying the command before sending it. Thus, he variable interpolation and the redirection are both handled by the remote shell, in this order.
So your commented-out "not work" command could easily be fixed with proper quoting. However, it will be much more elegant and efficient to use a single remote session, and execute all the commands in one go. Mixing the local variable IP with remote variables calls for some rather elaborate escaping, though. A major simplification would be to pass the value on standard input, so that the entire remote script can be single quoted.
#!/bin/bash
pass='dpassspass'
user='root#10.10.19.18'
IP="10.2.1.41"
result=$(echo "$IP" |
sshpass -p "$pass" ssh -t "$user" '
path=/sys/variable/serv
cat > "$path"
cd /sys_ovh
./serv.bash
cat "$path"')
echo mystart-"${result%$'\n'*}"-myend
echo start-"${result#*$'\n'}"-end
echo start-"$IP"-end
if [ "${result#*$'\n'}" == "$IP" ]; then
echo "run"
fi
The output from the remote shell is two lines; we pick it apart by using the shell's prefix and suffix substitution operators.