previously I've been using Maven and the maven-bundle-plugin to archive the following:
When doing mvn install, local maven repo contains my bundle + all my bundle's deps automatically
Local repo becomes OBR repository by mvn bundle:index, also repository.xml is automatically updated with every mvn install.
Local repo can now be used for Karaf bundle deployment
Now, I'm looking to migrate some projects to Gradle, which is very nice in many ways. I'm successfully creating bundles using the 'org.dm.bundle' plugin (basic 'osgi' plugin did not allow me to auto-create service components).
By using Gradle's maven plugin I can do gradle install to install my own bundle in local maven repo. I could then use bindex to manually (or through some gradle hacking) index the repo.
However, my dependencies are not put into the maven repo, they are only stored in the gradle cache dir. Thus, I can not use the OBR repo to deploy in Karaf yet.
I've been looking around a lot trying to find some good solution to this, but I have not found anything.
I've looked at Karaf feature files, which would allow me to specify mvn URLs directly instead of relying on OBR, but I'd like to avoid messing with feature files manually.
There are references to using Nexus, but only Nexus Pro supports OBR from what I can see?
I'm up for suggestions on alternative solutions as well; the main goal is that I shall be able to deploy my bundles + deps in Karaf. Maven does not have to be used at all really, although I need some way for different Gradle projects to find dependencies from some other projects (which are not part of the same multi-project).
Any ideas or discussions to put me on the right track is appreciated!
This may be a bit late, but I just stumbled over your question while looking for a way to fetch with gradle from an OBR repository.
As far as I understood you want to push (gradle deploy) to some Maven repository and use it as an OBR repository. This is possible with Eclipse Package Drone, eclipse/packagedrone. You can deploy using Maven/Gradle deploy and let it generate a P2, OBR and OSGi R5 index repository.
Related
I am building a Java SDK that can be used to work on my app.
When I run ./gradlew :my-sdk-library:dependencies I get my transitive tree of deps.
All my customers refuse to access libraries on the internet. And they do not have a local maven proxy either, so I need to supply my sdk jars and the other open source jars too.
So I would like to convert that into a local maven repository so that I can send it to those who cannot access our maven repository that is hosted on Artifactory, nor Maven central.
The naive approach is the make a shaded (shadow) jar containing all the libraries then import it as a implementation file(path-to-shaded.jar). But that is not good because IDEs do not like huge 200MB shaded jar files. And you lose all the dependency management provided by the GAV values.
So I want to produce a local maven repository I can send along with the SDK.
So if this were Maven I would go to a fresh VM, run mvn install, then just copy the ~/.m2/repository folder and there you go.
I did find a project https://github.com/sinsongdev/gradle-cash-to-maven-repo which might work to create a local maven repo using the gradle cache, but it is not widely used. I'll give it a try.
Basically I want exactly what https://github.com/johnrengelman/shadow does but instead of producing an uber jar, to create a local maven repo.
Is there some option like that in Gradle to create an offline copy of the repo or cache so that developers who are behind strict firewalls can use your SDK?
We have a dependency third-party library that is available online in jar form, but it is not in Maven Repository, or known to be in any other repository.
How can we use pom.xml to auto-retrieve this dependency, based on a URL?
We don't want to store it in our Git repo, because that's A Bad Thing.
The idea here is that when people check out the project, they can use their IDE Maven integration (or just mvn command line tools) to download all the dependencies. So we would want to be able to also download this other third party dependency just like all the ones in Maven repo.
I have not been able to come up with an answer to this based on searches -- all solutions seem to be "download it first and create a local repo." Obviously Maven can download from the Internet, since that's how it connects to Maven Central and other repos. So I don't see why it cannot download arbitrary URLs that present packages in recognizable formats.
Long term, the best solution is to use your own artifact repository like Nexus, Artifactory or Archiva.
All of these have a manual upload function that you can use to set the groupId, artifactId and version, so you can then refer to the artifact as usual.
If you want to go really low tech, I think you can just put some machine's local repository behind an Apache, provided you grant read/write access.
Then you need to add your new repository in the Maven settings.xml file, as described here.
Maven uses the coordinates to navigate the repository (which has a specific layout) and verify artifact checksums for corruption/tampering using metadata files in specific locations of the repo.
AFAIK this is similar to other package management systems like APT and RubyGems that use repo manifests and don't allow arbitrary URL downloads.
Skipping the repository manager
If you really don't want or can't use a repository manager, you can always download the artifact and manually install it using the Maven Install Plugin:
mvn install:install-file -Dfile=your-artifact-1.0.jar -DgroupId=org.some.group -DartifactId=your-artifact -Dversion=1.0
However, you'll have to do this on every machine that runs the build, every time that artifact needs to change.
I have a multi module maven project ('assembler'), and I would like to add a FindBugs phase.
The problem is that some of the projects are not able to build stand alone since have dependencies on other projects... however when I invoke mvn package from the 'assembler' project - it works fine and all inner dependencies are resolved.
The problem is that when mvn findbugs:findbugs command is executed, those inner dependencies are not resolved, and maven complains.
Searching Google, I found a way to make it work, using mvn install, but I do not like this approach since eventually this should be used in CI with Jenkins and I do not want to rely on local maven repo on the build server.
Will appreciate hearing your ideas.
Thanks.
Don't be afraid of mvn install, it is your friend. What you need is to set up a centralized Maven repository (such as Nexus or Artifactory) or rent one (such as Bintray) to which you deploy your Maven artifacts to.
Jenkins or any other decent CI engine can do the actual deploying for you, either natively or through Maven. Once deployed, other users - Jenkins included - will be able to resolve their dependencies and you will be able to run FindBugs, PMD, JaCoco, host Javadoc or pretty much anything you want.
Side-note: Don't get confused by the term deploy as most people new to Maven usually get. In context of Maven, it has absolutely nothing to with your target environment. It simply means that an artifact is pushed out to a remote repository and nothing else.
I want to share all the External Jars currently being managed by MAVEN with my other team members. I am using Mercurial as my SCM and i am trying to figure what is the easiest way to commit my entire project (include libs) to a repository so that my team members can clone and get running without severe eclipse configuration?
Maven is there in order to help you retrieving libraries. So that, all you have to do is to commit all your files including the pom.xml (.hg should contains everything in target, and other unrelevant files)
Then your project members can pull the sources and run mvn eclipse:eclipse (see eclipse & maven.
And finally import the project in Eclipse.
That was is they need sources...
If they only need the jars, you must put in your infrastructure a company repo that will handle your deployment using mvn deploy. Some information there maven repo::Intro, take special care at the wagon you could use (ftp, ...)
This way, when you're done with your devel and you have pushed your code, you just have to deploy the jar on your repo.
Doing so, your project member'll have to run mvn -U eclipse:eclipse or any goal to update their local repository with your lastest deployed version.
I'm new to maven project.
I'm changing an ant project to maven project.
To install the 3rd party jar's in maven local repository, I used install command.
Its trying to download the resource jar.pom.
I don't have download access in my organization so the build failed for installtion.
After request i got the resouce jar and clean jar in my desktop(also i can get other necessary jar).
How to make maven to use these jar for the process and how to install the jar in local repository without internet acess.
I downloaded the jar and placed in local repository but it couldn't point the path and use those jars.
please let me know what steps i have follow to run maven install and other commands to build the project without internet access.
where should i placed the jar which i have downloaded by external way.
Please guide me for building and deploying the project.
Thanks in advance.
http://maven.40175.n5.nabble.com/Maven-installation-and-using-in-project-without-Internet-conncetion-tp4564443p4564443.html.
http://www.coderanch.com/t/544641/Jobs-Offered/careers/Maven-installation-project-without-Internet#2471141
I've posted same question in these link
You need an internet connection. Maven isn't initially self-sufficient. It needs to download a bunch of plugins along with their dependencies and the dependencies of your own project. And this really depends on what sort of settings you have for your projects. One set up will require one set of dependencies, another - a whole different one. You can't download artifacts from the Maven Central manually and then install them locally one by one. Simply put, that sounds stupid.
I understand that you're coming from the Ant world where Ant has everything it needs on the local file system. However, Maven relies on the fact that it will have a central repository (either Maven Central, or your own repository - Nexus, Artifactory, etc.) from which to download the plugins and dependencies it needs. There is no point in you migrating to Maven, unless you'll be allowed access to the Central Maven Repository.
Yes, indeed, you can run Maven offline and you can have Maven produce a local repository for you to use when you are in offline mode. However, what you're trying to do is against Maven's principles.
If your company won't allow access to Maven Central, just stick to Ant. Your effort will be a waste of your company's and, ultimately, your own time.
In fact the maven strenght is mainly in the internet accessible repositories and automatic dependency management. But it's possible to use this tool to build your project if you have all dependencies required for your project in your local repository. Then you may use -o option for offline mode and maven will not try to download updated artefact versions.
To get the artifacts into you local repository you have several options:
1) connect to the internet once and mvn build the project (this will download all required dependencies)
2) install dependencies as jar to the local repository manualy (using appropriate mvn command)
I think the questioner is looking for -o or --offline option for mvn. This is a command line option and can be provided while executing.
I think you can setup your repo correctly and execute the mvn goals once when you are connected to internet and use the -o option for later executions .
Hope this helps.
~Abhay
You can configure maven to run in offline mode. Add this entry to your settings.xml
<offline>true</offline>
See here for further information:
http://maven.apache.org/settings.html
Before you can use offline mode, you have to install all necessary third party jars to your local maven repository.
mvn install:install-file
-Dfile=filename.jar
-DgroupId=com.stackoverflow
-DartifactId=artifact
-Dversion=1.0.0
-Dpackaging=jar
-DcreateChecksum=true
-DgeneratePom=true
It's much easier to get those jars in your local repository using an internet connection and online mode.
It's possible to install these resource jars in your local maven repo using install-file. This will make the available to the build. You'll have to do this for each individually, but once that's done you won't have to do anything special.
To be clear, maven puts everything in your local repository, both the jar you're building with this project and the various library jars. Because your system cannot be connected to the internet to maven can populate the local repo with your libraries, you'll have to use this manual approach.
Edit: You should be able to run install-file anywhere. When you do, you'll need to provide the groupId, artifactId, version, and packaging using the command line options. If you already have a POM file for the library, you can provide that instead via -DpomFile=your-pom.xml.
This question has some useful info: How to manually install an artifact in Maven 2?