I cant install heroku in my kali linux operating system. how can i resolve this issue?
isn't it not possible to run heroku in kali linux?
when I have try to install, it show snap command not found.
Heroku no longer supports Snap installs:
Snap installs are no longer supported. Please use another install method below.
Since Kali is derived from Debian, you should be able to use the Debian / Ubuntu method (which doesn't auto-update) or the standalone tarball method (which does). You can also use the NPM / Yarn package if you prefer, though Heroku recommends against it.
All of these options require some amount of trust in Heroku. The first two pull a script down from the Internet and pipe it into sh, which always makes me a bit uneasy. I suspect they both request elevated privileges during the install process. Instead of piping the file directly in to sh as Heroku recommends, I suggest you download it and at least give it a quick read through the first time.
In any case, here is the command that Heroku recommends to install the standalone version:
curl https://cli-assets.heroku.com/install.sh | sh
I am a newbie to both AWS and MobaXterm. I am trying to use MobaXterm to manage AWS instances because it comes with bash.
I am following the commands as per https://docs.aws.amazon.com/cli/latest/userguide/install-cliv2-linux.html.
When I run the following command $ sudo ./aws/install, I get the following error:
Unable to start 'install': There is no application associated with the
given file name extension.
I did run chmod 777 to ensure that I am able to read/write/execute. Please see attached image.
I do know that I can use Windows CLI installer in command line. However, doing SSH to EC2 is a nightmare in Windows with all certificates. With MobaXterm (because of bash), it is very easy. So, my preference is to use MobaXterm instead of Windows command prompt.
Moreover, I don't want to directly install Ubuntu. Hence, I am looking for some guidance here. I'd appreciate any help.
I am hoping that I am not missing any package. Thanks for any help.
In order for AWS cli to run on MobaXterm, you will need to run the following commands in MobaXterm:
MobApt install python2-pip
pip2 install awscli
It will take some time for MobaXterm to complete steps 1 and 2. Also, AWS cli runs super slow in MobaXterm. You are better off using cmd.
This is the site that helped me ran AWS cli on MobaXterm.
https://majornetwork.net/2017/07/installing-aws-cli-on-cygwin/
Currently have an issue where i can not enable the ldap module in homestead. I have changed multiple php.ini files and still nothing seems to be working. Has anyone else had issues with enabling modules in homestead?
Side note: when trying to restart php-fpm i am getting a permission denied issue. They prompt me with a password (which i have tried "secret") but still cant seem to get that to work either.
Have restarted the homestead instance multiple times as well. no prevail.
any thoughts?
Citti
I think this question deserves its own answer as it's pretty easy to install the wrong version of ldap on homestead and not know why things aren't working.
TL;DR: Match the version of ldap to the version of php you're running & install with apt-get.
For example, running homestead v.6.1.0:
cd HOMESTEADFOLDER # on your host
vagrant ssh # access the guest machine
sudo apt-get update # update apt-get package list
sudo apt-get install php7.1-ldap # or whatever version
In my example above, if you switch out php7.1-ldap for php7.0-ldap everything appears to install correctly (it does in fact install correctly) but, in reality, you've installed the module to a version of php that's not actually running. It took me several attempts at rebooting FPM to figure out this is what I had done.
Side note: apt-get will restart php and reload modules so there's no need to try and reboot the server or mess about with .ini files.
While ssh-ed in to the guest machine, you can check that the package is installed with php -m
If ldap is a thing your project needs, it's probably a better idea to handle this in a script. The answer referenced by fh-jashmore in his comment above comment has a simple but solid example: How to automatically enable php extensions in Homestead on vagrant up
I've followed this (https://github.com/IntersectAustralia/acdata/wiki/Setting-up-OpenLDAP) tutorial for set up LDAP server in my local machine.
I've done all these steps
Installed Homebrew
Installed openldap using brew command, including berkeley db
Updated the slapd.conf file
Started the server using command "sudo /usr/local/libexec/slapd"
Now how do i know the LDAP server is running?
I tried a lot but i could'nt succeed,later i deiced to go with ADS (http://directory.apache.org/studio/). Its easy to set up. Believe me i made the installation and configuration in 5 mins. Thank you apache.
Use -d3 suffix.
Run sudo /usr/libexec/slapd -d3, it will show you the details.
The firewall I'm behind is running Microsoft ISA server in NTLM-only mode. Hash anyone have success getting their Ruby gems to install/update via Ruby SSPI gem or other method?
... or am I just being lazy?
Note: rubysspi-1.2.4 does not work.
This also works for "igem", part of the IronRuby project
For the Windows OS, I used Fiddler to work around the issue.
Install/Run Fiddler from www.fiddler2.com
Run gem:
$ gem install --http-proxy http://localhost:8888 $gem_name
I wasn't able to get mine working from the command-line switch but I have been able to do it just by setting my HTTP_PROXY environment variable. (Note that case seems to be important). I have a batch file that has a line like this in it:
SET HTTP_PROXY=http://%USER%:%PASSWORD%#%SERVER%:%PORT%
I set the four referenced variables before I get to this line obviously. As an example if my username is "wolfbyte", my password is "secret" and my proxy is called "pigsy" and operates on port 8080:
SET HTTP_PROXY=http://wolfbyte:secret#pigsy:8080
You might want to be careful how you manage that because it stores your password in plain text in the machine's session but I don't think it should be too much of an issue.
This totally worked:
gem install --http-proxy http://COMPANY.PROXY.ADDRESS $gem_name
I've been using cntlm (http://cntlm.sourceforge.net/) at work. Configuration is very similar to ntlmaps.
gem install --http-proxy http://localhost:3128 _name_of_gem_
Works great, and also allows me to connect my Ubuntu box to the ISA proxy.
Check out http://cntlm.wiki.sourceforge.net/ for more information
I tried some of these solutions, and none of them worked. I finally found a solution that works for me:
gem install -p http://proxy_ip:proxy_port rails
using the -p parameter to pass the proxy. I'm using Gem version 1.9.1.
Create a .gemrc file (either in /etc/gemrc or ~/.gemrc or for example with chef gem in /opt/chef/embedded/etc/gemrc) containing:
http_proxy: http://proxy:3128
Then you can gem install as usual.
This solved my problem perfectly:
gem install -p http://proxy_ip:proxy_port compass
You might need to add your user name and password to it:
gem install -p http://[username]:[password]#proxy_ip:proxy_port compass
If you are having problems getting authenticated through your proxy, be sure to set the environment variables in exactly the format below:
set HTTP_PROXY=some.proxy.com
set HTTP_PROXY_USER=user
set HTTP_PROXY_PASS=password
The user:password# syntax doesn't seem to work and there are also some badly named environment variables floating around on Stack Overflow and various forum posts.
Also be aware that it can take a while for your gems to start downloading. At first I thought it wasn't working but with a bit of patience they started downloading as expected.
Quick answer : Add proxy configuration with parameter for both install/update
gem install --http-proxy http://host:port/ package_name
gem update --http-proxy http://host:port/ package_name
I tried all the above solutions, however none of them worked. If you're on linux/macOS i highly suggest using tsocks over an ssh tunnel. What you need in order to get this setup working is a machine where you can log in via ssh, and in addition to that a programm called tsocks installed.
The idea here is to create a dynamic tunnel via SSH (a socks5 proxy). We then configure tsocks to use this tunnel and to start our applications, in this case:
tsocks gem install ...
or to account for rails 3.0:
tsocks bundle install
A more detailed guide can be found under:
http://blog.byscripts.info/2011/04/bypass-a-proxy-with-ssh-tunnel-and-tsocks-under-ubuntu/
Despite being written for Ubuntu the procedure should be applicable for all Unix based machines. An alternative to tsocks for Windows is FreeCap (http://www.freecap.ru/eng/). A viable SSH client on windows is called putty.
Posts abound regarding this topic, and to help others save hours of trying different solutions, here is the final result of my hours of tinkering.
The three solutions around the internet at the moment are:
rubysspi
apserver
cntlm
rubysspi only works from a Windows machine, AFAIK, as it relies on the Win32Api library. So if you are on a Windows box trying to run through a proxy, this is the solution for you. If you are on a Linux distro, you're out of luck.
apserver seems to be a dead project. The link listed in the posts I've seen lead to 404 page on sourceforge. I search for "apserver" on sourceforge returns nothing.
The sourceforge link for cntlm that I've seen redirects to http://cntlm.awk.cz/, but that times out. A search on sourceforge turns up this link, which does work: http://sourceforge.net/projects/cntlm/
After downloading and configuring cntlm I have managed to install a gem through the proxy, so this seems to be the best solution for Linux distros.
A workaround is to install http://web.archive.org/web/20060913093359/http://apserver.sourceforge.net:80/ on your local machine, configure it and run gems through this proxy.
Install: Just download apserver 097 (and not the experimental 098!) and unpack.
Configure: Edit the server.cfg file and put the values for your MS proxy in PARENT_PROXY and PARENT_PROXY_PORT. Enter the values for DOMAIN and USER. Leave PASSWORD blank (nothing after the colon) – you will be prompted when launching it.
Run apserver: cd aps097; python main.py
Run Gems: gem install—http-proxy http://localhost:5865/ library
I am working behind a proxy and just installed SASS by downloading directly from http://rubygems.org.
I then ran sudo gem install [path/to/downloaded/gem/file]. I cannot say this will work for all gems, but it may help some people.
This worked for me in a Windows box:
set HTTP_PROXY=http://server:port
set HTTP_PROXY_USER=username
set HTTP_PROXY_PASS=userparssword
set HTTPS_PROXY=http://server:port
set HTTPS_PROXY_USER=username
set HTTPS_PROXY_PASS=userpassword
I have a batch file with these lines that I use to set environment values when I need it.
The trick, in my case, was HTTPS_PROXY sets. Without them, I always got a 407 proxy authentication error.
If you are on a *nix system, use this:
export http_proxy=http://${proxy.host}:${port}
export https_proxy=http://${proxy.host}:${port}
and then try:
gem install ${gem_name}
rubysspi-1.3.1 worked for me on Windows 7, using the instructions from this page:
http://www.stuartellis.eu/articles/installing-ruby/
If you want to use SOCKS5 proxy, you may try rubygems-socksproxy https://github.com/gussan/rubygems-socksproxy.
It works for me on OSX 10.9.3.
If behind a proxy, you can navigate to Ruby downloads, click on Download, which will download the specified update ( or Gem ) to a desired location.
Next, via Ruby command line, navigate to the downloaded location by using : pushd [directory]
eg : pushd D:\Setups
then run the following command: gem install [update name] --local
eg: gem install rubygems-update --local.
Tested on Windows 7 with Ruby update version 2.4.1.
To check use following command : ruby -v
Rather than editing batch files (which you may have to do for other Ruby gems, e.g. Bundler), it's probably better to do this once, and do it properly.
On Windows, behind my corporate proxy, all I had to do was add the HTTP_PROXY environment variable to my system.
Start -> right click Computer -> Properties
Choose "Advanced System Settings"
Click Advanced -> Environment Variables
Create a new System variable named "HTTP_PROXY", and set the Value to your proxy server
Reboot or log out and back in again
Depending on your authentication requirements, the HTTP_PROXY value can be as simple as:
http://proxy-server-name
Or more complex as others have pointed out
http://username:password#proxy-server-name:port-number
for anyone tunnelling with SSH; you can create a version of the gem command that uses SOCKS proxy:
Install socksify with gem install socksify (you'll need to be able to do this step without proxy, at least)
Copy your existing gem exe
cp $(command which gem) /usr/local/bin/proxy_gem
Open it in your favourite editor and add this at the top (after the shebang)
require 'socksify'
if ENV['SOCKS_PROXY']
require 'socksify'
host, port = ENV['SOCKS_PROXY'].split(':')
TCPSocket.socks_server = host || 'localhost'
TCPSocket.socks_port = port.to_i || 1080
end
Set up your tunnel
ssh -D 8123 -f -C -q -N user#proxy
Run your gem command with proxy_gem
SOCKS_PROXY=localhost:8123 proxy_gem push mygem