How can I do the following:
data: ls_header type BAPIMEPOHEADER.
" fill it
write ls_header.
currently I'm getting an error because write can not parse the complex type to a string. Is there a simple way to get this code running in abap?
You could use something like:
DATA: g_struct TYPE bapimepoheader.
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE g_struct TO FIELD-SYMBOL(<f>).
IF sy-subrc NE 0.
EXIT.
ENDIF.
WRITE: / <f>.
ENDDO.
Perhaps not exactly the answer you expect: If you list each field.
This can be done quite easy via the Pattern-mask in SE38:
Select the Write-pattern:
Enter the structure you want:
Select the fields
Confirm with "Copy"
Confirm and you get
WRITE: bapimepoheader-po_number,
bapimepoheader-comp_code,
bapimepoheader-doc_type,
bapimepoheader-delete_ind,
bapimepoheader-status,
bapimepoheader-creat_date,
bapimepoheader-created_by,
bapimepoheader-item_intvl,
bapimepoheader-vendor,
bapimepoheader-langu,
bapimepoheader-langu_iso,
bapimepoheader-pmnttrms,
bapimepoheader-dscnt1_to,
bapimepoheader-dscnt2_to,
bapimepoheader-dscnt3_to,
bapimepoheader-dsct_pct1,
bapimepoheader-dsct_pct2,
bapimepoheader-purch_org,
bapimepoheader-pur_group,
bapimepoheader-currency,
bapimepoheader-currency_iso,
bapimepoheader-exch_rate,
bapimepoheader-ex_rate_fx,
bapimepoheader-doc_date,
bapimepoheader-vper_start,
bapimepoheader-vper_end,
bapimepoheader-warranty,
bapimepoheader-quotation,
bapimepoheader-quot_date,
bapimepoheader-ref_1,
bapimepoheader-sales_pers,
bapimepoheader-telephone,
bapimepoheader-suppl_vend,
bapimepoheader-customer,
bapimepoheader-agreement,
bapimepoheader-gr_message,
bapimepoheader-suppl_plnt,
bapimepoheader-incoterms1,
bapimepoheader-incoterms2,
bapimepoheader-collect_no,
bapimepoheader-diff_inv,
bapimepoheader-our_ref,
bapimepoheader-logsystem,
bapimepoheader-subitemint,
bapimepoheader-po_rel_ind,
bapimepoheader-rel_status,
bapimepoheader-vat_cntry,
bapimepoheader-vat_cntry_iso,
bapimepoheader-reason_cancel,
bapimepoheader-reason_code,
bapimepoheader-retention_type,
bapimepoheader-retention_percentage,
bapimepoheader-downpay_type,
bapimepoheader-downpay_amount,
bapimepoheader-downpay_percent,
bapimepoheader-downpay_duedate,
bapimepoheader-memory,
bapimepoheader-memorytype,
bapimepoheader-shiptype,
bapimepoheader-handoverloc,
bapimepoheader-shipcond,
bapimepoheader-incotermsv,
bapimepoheader-incoterms2l,
bapimepoheader-incoterms3l.
Now you can make a simple replacement of bapimepoheader with ls_header and you have an output of all fields of the structure.
Maybe this is not elegant and you must adapt your report, if the structure changes. But I like this way, because often I don't need all fields and I can select the fields in an easy way.
I know two ways, one is procedural, the other is oop.
Here is the procedural approach.
Select the structure's fields (or whatever else You might need ) from the data-dictionary table DD03L into a local internal table.
Loop over the table into a work-area
Check, whether current field is a flat single datatype, and if so,
Assign component workarea-fieldname of structure ls_header into anyfieldsymbol
Write anyfieldsymbol
Do You need the code ?
Class CL_ABAP_CONTAINER_UTILITIES was specially introduced for that by SAP.
Use FILL_CONTAINER_C method for output the structure in a WRITE manner:
DATA: ls_header type BAPIMEPOHEADER.
CALL METHOD CL_ABAP_CONTAINER_UTILITIES=>FILL_CONTAINER_C
EXPORTING
IM_VALUE = ls_header
IMPORTING
EX_CONTAINER = DATA(container)
EXCEPTIONS
ILLEGAL_PARAMETER_TYPE = 1
others = 2.
WRITE container.
You can write your structure to a string and then output the string. Same method idoc segments are created.
Related
I've seen the JSON array questions here and I'm still a little lost, so could use some extra help.
Here's the setup:
My Flow calls a sproc on my DB and that sproc returns this JSON:
{
"ResultSets": {
"Table1": [
{
"OrderID": 9518338,
"BasketID": 9518338,
"RefID": 65178176,
"SiteConfigID": 237
}
]
},
"OutputParameters": {}
}
Then I use a PARSE JSON action to get what looks like the same result, but now I'm told it's parsed and I can call variables.
Issue is when I try to call just, say, SiteConfigID, I get "The output you selected is inside a collection and needs to be looped over to be accessed. This action cannot be inside a foreach."
After some research, I know what's going on here. Table1 is an Array, and I need to tell PowerAutomate to just grab the first record of that array so it knows it's working with just a record instead of a full array. Fair enough. So I spin up a "Return Values to Virtual Power Agents" action just to see my output. I know I'm supposed to use a 'first' expression or a 'get [0] from array expression here, but I can't seem to make them work. Below are what I've tried and the errors I get:
Tried:
first(body('Parse-Sproc')?['Table1/SiteConfigID'])
Got: InvalidTemplate. Unable to process template language expressions in action 'Return_value(s)_to_Power_Virtual_Agents' inputs at line '0' and column '0': 'The template language function 'first' expects its parameter be an array or a string. The provided value is of type 'Null'. Please see https://aka.ms/logicexpressions#first for usage details.'.
Also Tried:
body('Parse-Sproc')?['Table1/SiteconfigID']
which just returns a null valued variable
Finally I tried
outputs('Parse-Sproc')?['Table1']?['value'][0]?['SiteConfigID']
Which STILL gives me a null-valued variable. It's the worst.
In that last expression, I also switched the variable type in the return to pva action to a string instead of a number, no dice.
Also, changed 'outputs' in that expression for 'body' .. also no dice
Here is a screenie of the setup:
To be clear: the end result i'm looking for is for the system to just return "SiteConfigID" as a string or an int so that I can pipe that into a virtual agent.
I believe this is what you need as an expression ...
body('Parse-Sproc')?['ResultSets']['Table1'][0]?['SiteConfigID']
You can see I'm just traversing down to the object and through the array to get the value.
Naturally, I don't have your exact flow but if I use your JSON and load it up into Parse JSON step to get the schema, I am able to get the result. I do get a different schema to you though so will be interesting to see if it directly translates.
I have an xml
<family>
<child_one>ROY</child_one>
<child_two>VIC</child_two>
</family>
I want to fetch the value from the XML based on the dynamic tag in ESQL. I have tried like this
SET dynamicTag = 'child_'||num;
SET value = InputRoot.XMLNSC.parent.(XML.Element)dynamicTag;
Here num is the value received from the input it can be one or two. The result should be value = ROY if num is one and value is VIC if num is two.
The chapter ESQL field reference overview describes this use case:
Because the names of the fields appear in the ESQL program, they must be known when the program is written. This limitation can be avoided by using the alternative syntax that uses braces ( { ... } ).
So can change your code like this:
SET value = InputRoot.XMLNSC.parent.(XMLNSC.Element){dynamicTag};
Notice the change of the element type as well, see comment of #kimbert.
I am trying to write logic for a search query. There are many different conditions with different parameters. One parameter sent from form is code. So there are code values in two different tables: competitions and responses. What I need is to check the params[:code] value first in competitions table and if it does not exist then check in responses table. If it does not exist in either table then it should return nil. I am trying to write it in a single if statement. The code I tried is below:
competitions = Competition.includes(:event, :responses)
if params[:code].present?
competitions = (competitions.where(code: params[:code])) ||
(competitions.joins(:responses).where(responses: { code: params[:code] }))
The above code checks only the value of competitions.where(code: params[:code]). If that value is [], then it is not evaluating the second condition. What changes should I do to make the above code work as per the requirements mentioned above?
competitions.where(code: params[:code]) returns a Relation object which is always truthy.
Luckily enough, it implements #presence method, returning either the value if it’s not blank, or nil. So, this should work:
competitions.where(code: params[:code]).presence || ...
I know that with Descriptive programming you can do something like this:
Browser("StackOverflow").Page("StackOverflow").Link("text:=Go To Next Page ", "html tag:=A").Click
But is it possible to create some kind of string so I can assign more than one data value and pass it as single variable? I've tried many combinations using escape characters and I always get error.
For example in the case above, let's say I have more properties in the Page object, so I'd normally have to do something like this:
Browser("StackOverflow").Page("name:=StackOverflow", "html id:=PageID")...etc...
But I'd like to pass "name:=StackOverflow", "html id:=PageID" as a single variable, so when writing many objects I'd only have to write:
Browser(BrowserString).Page(PageString).WebEdit("name:=asdfgh")
And the first part would remain static, so if the parents' data needs to be modified I'd only have to modify two variables and not all the objects created in all libraries.
Is it possible?
If I was not clear enough please let me know.
Thank you in advance!
I think what you're looking for is UFT's Description object
This allows you finer grained control on the description since in descriptive programming all values are regular expressions but with Description you can turn the regular expression functionality off for a specific property.
Set desc = Description.Create()
desc("html tag").Value = "A"
desc("innertext").Value = "More information..."
desc("innertext").RegularExpression = False
Browser("Example Domain").Navigate "www.example.com"
Browser("Example Domain").Page("Example Domain").WebElement(desc).Click
If you want to represent this with plain string then it's a bit more of a problem, you can write a helper function but I'm not sure I would recommend it.
Function Desc(descString)
Set ret = Description.Create()
values = Split(descString, "::")
For Each value In values
keyVal = Split(value, ":=")
ret(keyVal(0)).Value = keyVal(1)
Next
Set Desc = ret
End Function
' Usage
Browser("StackOverflow").Page("StackOverflow").WebElement(Desc("html tag:=H2::innertext:=some text")).Click
Further reading about descriptive programming.
As an alternative to Motti's excellent answer, you could also Set a variable to match your initial descriptive object and then extend it as required:
Set myPage = Browser("StackOverflow").Page("name:=StackOverflow", "html id:=PageID")
after which you can then use
myPage.WebEdit("name:=asdfgh")
throughout the rest of the code, so long as the myPage object stays in scope...
I know they advice to get a cell value this way:
columnValue = vars.getObject("resultObject").get(0).get("Column Name");
as stated on jMeter doc : component reference : JDBC_Request.
But: How to access the same RS cell value by just a number of the column?
RS.get(0).get(4);
...instead of giving it a String of column Name/Label.
edit 1: Lets use Groovy/Java, instead of BeanShell. Thanks.
edit 2: The original motivation was the difference between column Name / Label, as these seem to be not fully guaranteed (? seems to be not clear here, not to me), especially due case-sensitivity ("id"/"ID", "name"/"Name"/"NAME" ..)
It should be something like:
String value = (new ArrayList<String>(vars.getObject("resultObject").get(0).values())).get(4)
More information: Debugging JDBC Sampler Results in JMeter
Be aware that according to HashMap documentation:
This class makes no guarantees as to the order of the map; in particular, it does not guarantee that the order will remain constant over time.
So the order of columns might be a big question mark.
The row itself is a HashMap, defined in source code as:
HashMap<String, Object> row
So using BeanShell syntax, you could get it as
row = vars.getObject("resultObject").get(0); // returns HashMap
In HashMap, you cannot access item (column) by ID. You could, however, apply one of the methods described here, but HashMap doesn't guarantee order, so you cannot be sure what "column 4" will contain.
If you want to be able to loop through all columns, it's better to do it in a Map style, not by index. For example using entrySet() with BeanShell:
for(Map.Entry entry : row.entrySet())
{
log.info(entry.getKey() + "=" + entry.getValue());
}
See various ways to iterate through Map here.