i was watching a tutorial. In tutorial, instructor just executed command PROMPT $$ in terminal of visual studio code and his operating system was Windows.
changed his directory path to $$. Its not working on my machine.
i have tried https://www.hanselman.com/blog/ABetterPROMPTForCMDEXEOrCoolPromptEnvironmentVariablesAndANiceTransparentMultiprompt.aspx but its not working.
Finally found answer but it is a little bit different because the path 'C:\Windows>' didn't changed to '$$>' but it changed to 'C>' for all directories in drive C, and 'D>' for all directories in drive D.
Solution:
1. Go to Control Panel > System and Security > System
2. In left tab click Advanced system settings.
3. Dialog will appear. Click Environment Variables.
4. Under 'User variables for "Your username"' section, click 'New' Button.
5. Use following in the fields.
Variable name: PROMPT
Variable value: $n$g$s
Click OK
if does't work restart your machine. working for me.
I have Window 7 64 bit OS in my laptop. I did reinstall the OS yesterday which moved my old windows, documents, program files folder into Windows.old folders. I tried to delete everything in that folder considering to save space. I could delete everything but shortcut named "$NtUninstallKB48959$" in the below mentioned path.
"C:\Windows.old\$Recycle.Bin\S-1-5-21-276155270-2342152204-2275300765-1000\$RGEAPLQ"
That shortcut links to "C:\Windows\System32\config".
So whenever I try to delete it gives error as below
Delete Confirmation
Error
And the shortcut is Non-editable.
I tried these below steps but none of them worked out.
1. Run a Complete Anti-Virus scan by Avast.
2. Ensure running with full Administrative rights.
3. Removed junk files by cleanmgr.
4. Ensure I am the owner of the folder and subfolders ('Folder->Right Click->Properties->Security tab->Advanced->Owner->Edit->Change owner to->Select my username->Checked Replace owner on subcontainers and objects')
5. Run System File Checker (Run cmd with administrative rights->chkdsk /f/r)
6. Run Disk Check Tool (Run cmd with administrative rights->chkdsk /f/r)
7. Checked whether drivers are up to date by Device Manager
Try acessing the properties of the file : Left click > Properties
Then try to edit the shortcut target value and save. Then try again to delete
I have Sass installed on my Windows 7 machine and I'm trying to compile some scss.
Each time, I get the following output:
'sass' is not recognized as an internal or external command,
operable program or batch file.
[Finished in 0.2s with exit code 1]
[cmd: ['sass', '--update', 'W:\\exocet\\web\\build\\mirror\\css\\style.scss:W:\\exocet\\web\\build\\mirror\\css/style.css', '--stop-on-error', '--no-cache']]
[dir: W:\exocet\web\build\mirror\css]
[path: C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\EgisTec\MyWinLocker 3\x86;C:\Program Files (x86)\EgisTec\MyWinLocker 3\x64;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files (x86)\QuickTime\QTSystem\]
What appears to be the problem?
Thankfully, I found the answer here...
If you are receiving the 'sass is not recognized as an internal or
external command' error... ...and have Sass installed, you have to add
it to your system's PATH variable.
At the end of the string, add ;C:\Ruby192\bin.
Instructions for altering PATH variable can be found here.
Windows Vista and Windows 7 users:
From the Desktop, right-click My Computer and click Properties.
Click Advanced System Settings link in the left column.
In the System Properties window click the Environment Variables button.
Windows 2000 and Windows XP users:
The path is now managed by Windows 2000 and Windows XP and not the autoexec.bat
or autoexec.nt files as was done with earlier versions of Windows.
To change the system environment variables, follow the below steps.
From the Desktop, right-click My Computer and click Properties.
In the System Properties window, click on the Advanced tab.
In the Advanced section, click the Environment Variables button.
Finally, in the Environment Variables window (as shown below), highlight the Path variable in the Systems Variable section and click the Edit button. Add or modify the path lines with the paths you wish the computer to access. Each different directory is separated with a semicolon as shown below.
C:\Program Files;C:\Winnt;C:\Winnt\System32
Note that the numbers "192" given in the example in the first link ( ;C:\Ruby192\bin ) will differ for each version of Ruby.
I am having strange problem. I used to run appcfg.py to update my app to appengine but now its not working anymore. When I run this command
C:\Program Files <x86>\Google\google_appengine>appcfg.py update E:\path\myApp\
Its not giving me anything, no error no feedback. Its just back to this line
C:\Program Files <x86>\Google\google_appengine>
Any idea about this issue!
P.S. I'm using Python 2.7. My code is updating through google app launcher but I need to run it from cmd prompt as I will be downloading/uploading appengine stuff which launcher doesn't allow me to do!
Thanks
I still had a little trouble with the instructions. Here's the steps I used to create a batch file to use the Google App Engine download_app with Windows 7.
In my example,
I'll use drive, C:
Default python path will be, C:\Python27\python.exe
GAE path (include "), "C:\Program Files (x86)\Google\google_appengine\appcfg.py"
App ID {your_app_id} will be just your app-id name
{your_app_version} is the "Version:" number in your GAE app.yaml file
I'll create a folder on my Windows 7 desktop and call it GAE_App
The desktop folder path will be C:\Users\{username}\Desktop\GAE_App
{your email} will be the Gmail account connected to your GAE
Right-click on the desktop and select New->Text Document. Open the newly created text document and add the following line of code modified for your setup to the blank text document,
C:\Python27\python.exe "C:\Program Files (x86)\Google\google_appengine\appcfg.py" download_app -A {your_app_id} -V {your_app_version} --email={your email} C:\Users\{username}\Desktop\GAE_App
Save the text document and change the file name to GAE_Download.bat
It's important that the extension now says ".bat" instead of ".txt"
Once finished, click on the batch to execute it. You'll be asked for a password and then the files should download into the GAE_App folder on your desktop. Now, whenever you need to download your files, just click on the batch file.
Not sure why Google didn't simply include this feature with their GAE for Windows software.
I faced the same issue. Here is a simple solution.
Just do this following Steps:
Go to program file where google app engine is installed. Generally It is named as Google.
click on appcfg.py and select open with.. Select "Choose Default Programs".
Select Python from programs and select "Always Use the selected program to open this kind of file" .
Now run the command you should get the results on command line.
For reference click here
Fixed by accessing python lib like that
C:\Python27>python appcfg.py update E:\path\myApp\
Here's a solution that worked for me:
"google_appengine/appcfg.py" update "C:\PATH TO APP
The appcfg.bat that should be used is located **C:\Program Files\Google\Cloud SDK\google-cloud-sdk\platform\appengine-java-sdk\bin** and not the empty appcfg.bat that for some unknown reason also was here C:\Program Files\Google\Cloud SDK\
Good practice is to add this path to the system variable PATH
This worked for me
Basis
<PATH_TO_PYTHON>python <PATH_TO_APPCFG.PY>appcfg.py -A <PROJECT_INSTANCE_NAME> update app.yaml
Example
X:\Software\Python2.7\python Q:\SOFTWARE\GoogleAppEngineSDK\appcfg.py -A great-1337 update app.yaml
I've set up the Android SDK and Eclipse on my machine running Windows XP and AVDs (Android Virtual Devices) are saved to "Documents and Settings\user\.android" by default. Is there any way to change this behavior? I have all of the other components saved in a directory on a separate partition and would like everything to be consolidated. Obviously not a huge deal but does anyone here know a workaround for this?
Add a new user environment variable (Windows 7):
Start Menu > Control Panel > System > Advanced System Settings (on the left) > Environment Variables
Add a new user variable (at the top) that points your home user directory:
Variable name: ANDROID_SDK_HOME Variable value:
a path to a directory of your choice
AVD Manager will use this directory to save its .android directory into it.
For those who may be interested, I blogged about my first foray into Android development...
Android "Hello World": a Tale of Woe
Alternatively, you can use the Rapid Environment Editor to set the environment variables.
Based on official documentation https://developer.android.com/studio/command-line/variables.html you should change ANDROID_AVD_HOME environment var:
Emulator Environment Variables
By default, the emulator stores configuration files under
$HOME/.android/ and AVD data under $HOME/.android/avd/. You can
override the defaults by setting the following environment variables.
The emulator -avd command searches the avd directory in the
order of the values in $ANDROID_AVD_HOME,
$ANDROID_SDK_HOME/.android/avd/, and $HOME/.android/avd/. For emulator
environment variable help, type emulator -help-environment at the
command line. For information about emulator command-line options, see
Control the Emulator from the Command Line.
ANDROID_EMULATOR_HOME: Sets the path to the user-specific emulator configuration directory. The default location is
$ANDROID_SDK_HOME/.android/.
ANDROID_AVD_HOME: Sets the path to the directory that contains all AVD-specific files, which mostly consist of very large
disk images. The default location is $ANDROID_EMULATOR_HOME/avd/.
You might want to specify a new location if the default location is
low on disk space.
After change or set ANDROID_AVD_HOME you will have to move all content inside ~user/.android/avd/ to your new location and change path into ini file of each emulator, just replace it with your new path
Modify the file "virtual_android2.2.ini" in "C:\Documents and Settings{your windows login}.android\avd\":
target=android-8
path=E:\android_workspace\avd\virtual_android2.2.avd
And move the folder "virtual_android2.2.avd" from "C:\Documents and Settings{your windows login}.android\avd\" into "E:\android_workspace\avd\".
Move your .android to wherever you want it to.
Then, create a symlink like this:
# In your home folder
$ ln -s /path/to/.android/ .
This simply tells Linux that whenever the path ~/.android is referenced by any application, link it to /path/to/.android.
Go to the Android tools directory. Edit the android.bat command file. At about the end of the command file, find a line similar to
call %java_exe% -Djava.ext.dirs=%java_ext_dirs% -Dcom.android.sdkmanager.toolsdir="%tools_dir%" -Dcom.android.sdkmanager.workdir="%work_dir%" -jar %jar_path% %*
and replace
call %java_exe%
with
call %java_exe% -Duser.home={your_prefer_dir}
where {your_prefer_dire} is your preferred directory without braces but add doublequotes,
e.g.
call %java_exe% -Duser.home="E:\Program Files (x86)\android-sdk-windows"
For Visual Studio 2017 on Windows 10
Copy C:\Users\YOURUSERNAME\.android folder to (for example) E:\avd
Open the environment variables window:
Go into Settings and click on System.
On the left, click About and select System info at the
bottom.
In the new window, click Advanced system
settings on the left.
Click Environment Variables at
the bottom of the resulting window.
Add a new variable:
Variable name: ANDROID_SDK_HOME
Variable value: a path to a directory (e.g E:\avd)
Don't include .android in the variable value.
Restart Visual Studio.
For change SDK & NDK location go to:
Tools -> Options -> Xamarin -> Android Setting
You can change the .ini file for the new AVD:
target=android-7
path=C:\Users\username\.android\avd\VIRTUAL_DEVICE_NAME.avd
I don't know how to specify where the .ini file should be stored :)
In Windows 10 I had that problem because My C Drive was getting full and I had needed free Space, AVD folder had 14 gig space so I needed to move that folder to another driver, first answer not work for Me so I tested another way to fix it this problem,
I make a picture for you if you have the same problem, you don't need to move all of the files in .android folder to another drive (this way not work) just move avd folders in ....android\avd to another drive and open .ini files and change avd folder path from that file to the new path.
Like this image:
I hope this works for you.
Note: careful about a separate character before and after the path in ini file that you cannot see,if you remove that character it's not works
Check this out.
using the android command to create avd you can specify where to place files.
-p --path Location path of the directory where the new AVD will be created
The environmental variable ANDROID_AVD_HOME can be used to define the directory in which the AVD Manager shall look for AVD INI files and can therefore be used to change the location of the virtual devices;
The default value is %USERPROFILE%\.android\avd on Windows (or ~/.android/avd on Linux).
One can also create a link for the whole directory %USERPROFILE%\.android on Windows (or a sym-link for directory ~/.android on Linux).
When moving AVDs, the path entry in AVD INI file needs to be updated accordingly.
Another way to specify ANDROID_SDK_HOME without messing around with environment variables (especially when using ec2) is simply create a shortcut of eclipse and add the following as target
C:\Windows\System32\cmd.exe /C "setx ANDROID_SDK_HOME YOUR AVD PATH /M & YOUR ECLIPSE.EXE PATH"
This will set ANDROID_SDK_HOME as system variable whenever you launch eclipse.
HTH
Paul
Please take note of the following : modifying android.bat in the Android tools directory, as suggested in a previous answer, may lead to problems.
If you do so, in order to legitimately have your .android directory located to a non-default location then there may be an inconsistency between the AVDs listed by Android Studio (using "Tools > Android > AVD Manager") and the AVDs listed by sdk command line tool "android avd".
I suppose that Android Studio, with its internal AVD Manager, does not use the android.bat modified path ; it relies on the ANDROID_SDK_HOME variable to locate AVDs.
My own tests have shown that Android tools correctly use the ANDROID_SDK_HOME variable.
Therefore, there is no point, as far as I know, in modifying android.bat, and using the environment variable should be preferred.
there are major 4 steps
1. copy the .android folder to your desired location as i did in D:\Android\.android
2. set ANDROID_AVD_HOME in environment variables like ANDROID_AVD_HOME D:\Android\.android\avd
3. change avd name.ini file contents with new location like
avd.ini.encoding=UTF-8
path=D:\Android\.android\avd\Pixel_2_API_29.avd
path.rel=avd\Pixel_2_API_29.avd
target=android-29
4. restart android studio
1 - Move AVD to new Folder
2 - start Menu > Control Panel > System > Advanced System Settings (on the left) > Environment Variables
Add a new user variable:
Variable name: ANDROID_AVD_HOME
Variable value: a path to a directory of your choice
3 - Change the file .INI Set new folder.
4 - Open Android Studio
WORKS - Windows 2010
MORE INSTRUCTIONS : https://developer.android.com/studio/command-line/variables
In my case, what I concerned about is the C: drive disk space.
So what I did is copy the ".avd" folder(not file) to other drive, and leave the ".ini" file there but change it to point to the moved
I think the easiest way is to move the avd folder from C:\Users[USER].android folder to your desired location then create a symbolic link to it in C:\Users[USER].android with the same name.
If you wonder how to do this, first install Link Shell Extension. After folder movement right click on it and select Pick Link Source then right click in .android folder and in Drop As... sub menu select Symbolic Link.
I followed https://www.mysysadmintips.com/windows/clients/761-move-android-studio-avd-folder-to-a-new-location.
Start copying a folder "C:\Users\user\.android\avd" to "D:\Android\.android\avd" (or something else).
Close Android Studio and running emulators.
Press Win + Break and open Advanced System Settings. Then press Environment Variables. Add a user variable ANDROID_SDK_HOME. (I didn't experiment with ANDROID_AVD_HOME.) In Variable value field write D:\Android. If you also moved SDK to another folder, change ANDROID_HOME (I forgot to change it and some emulators didn't launch, see https://stackoverflow.com/a/57408085/2914140).
Wait until the folder will finish copying and start Android Studio.
Open Android Virtual Device Manager and see a list of emulators. If you don't see emulators and they existed, then probably you entered wrong path into user variable value in step 3. In this case close AS, change the variable and open AS again.
Start any emulator. It will try to restore it's state, but it sometimes fails. A black screen can appear instead of Android wallpaper.
In this case you can:
a. Restart your emulator. To do this close running emulator, then in AVD Manager click Cold Boot Now.
b. If this didn't help, open emulator settings, found in file "D:\Android\.android\avd\Pixel_API_27.ini".
Change a path to a new AVD folder. Restart the emulator.
Delete old AVD folder from "C:\Users\user\.android\avd".
For Windows 10 :
ANDROID_SDK_HOME
this link helped me.
Then just moved all content of "avd" to the new location. Now you may need to change the value of "path=" in the configuration Setting file of each avds to the new location. You can see the old avds in avd manager in Android Studio and they work.
ANDROID_SDK_HOME also worked for me on Windows 8 x64
also find all location (in my case it was d:\.android) and delete it. You won't need it anymore.
In AVD manager, after setting up AVD using a target with Google APIs, on run was getting error.
Detail showed: "AVD Unknown target 'Google Inc.:Google APIs:...... "
During install (on Win7 system) I had chosen a SDK directory location, instead of accepting C:\Users\...
I'd then added that directory to environment variable 'path'
Command line: android list targets did show a couple of Google apis.
Setting ANDROID_SDK_HOME to my install path fixed the avd run error.
Variable name: ANDROID_SDK_HOME
Variable value: C:\Users>User Name
worked for me.
MacOs
Get a directory adv
./emulator -help-datadir
the default directory is:
/Users/{your_computer_user_name}/.android
and then Go to avd Folder edit .ini file with path to your custom emulator directory
example :
path=/Volumes/Macintos/_emulatorandroid/avd/Nexus_5X_API_27.avd
path.rel=avd/Nexus_5X_API_27.avd
target=android-27
and then save. Now your Emulator haschange
And Result: