If I create an .exe file with Visual Studio 2010 (in the bin/Debug folder) is it possible to use a bat file to start this program?
I tried the below in my bat file:
start "c:\Services\ServicesChecker\ServicesChecker\bin\Debug" ServicesChecker.exe
however when I run it, it says Windows cannot find ServicesChecker.exe even though if I browse to the location I can see it?
In your command, the "c:\Services\..." is the title given to the window, and is not used to find the executable.
Try:
start c:\Services\ServicesChecker\ServicesChecker\bin\Debug\ServicesChecker.exe
Its because there is no option in start by which you can specify the path.
Use
start "c:\Services\ServicesChecker\ServicesChecker\bin\Debug\ServicesChecker.exe"
this should work.
Try just using the file path rather than start, and you need to include the filename in the same quoted path, like this:
"c:\Services\ServicesChecker\ServicesChecker\bin\Debug\ServicesChecker.exe"
I noticed that hh.exe is capable of decompiling a .chm file to a set of .html files. But in order to work it requires the path to the file be current directory and the filename be the filename itself, apparently without allowing a full path.
For example, this will work (in cmd):
c:\MyDir>hh -decompile extracted MyFile.chm
This won't work:
c:\>hh -decompile extracted c:\MyDir\MyFile.chm
This is relevant because I want to use a shell command from the registry to decompile the .chm file, and the parameter "%1" gives me the full path to the file only, and I don't know of a way to receive only the filename without the path
Try passing forward slash eg:
c:\>hh -decompile extracted c:/MyDir/MyFile.chm
You could also try to open command line in the folder containing your .chm file,
try 'shift' key and 'right click' mouse button and "Open command window here" option.
Make sure no file is sellected.
regards, joe
It won't work with paths quoted or otherwise.
It's easiest to just move the output folder and input *.chm into the root of the drive, cd there, and then simply run the hh.exe -decompile outputfolder input.chm command.
How can you make a .exe file accessible from any location in the Windows command window? Is there some registry entry that has to be entered?
You need to make sure that the exe is in a folder that's on the PATH environment variable.
You can do this by either installing it into a folder that's already on the PATH or by adding your folder to the PATH.
You can have your installer do this - but you may need to restart the machine to make sure it gets picked up.
Windows 10, 8.1, 8
Open start menu,
Type Edit environment variables
Open the option Edit the system environment variables
Click Environment variables... button
There you see two boxes, in System Variables box find path variable
Click Edit
a window pops up, click New
Type the Directory path of your .exe or batch file ( Directory means exclude the file name from path)
Click Ok on all open windows and restart your system restart the command prompt.
You can add the following registry key:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\myexe.exe
In this key, add the default string value containing the path to the exe file.
You have to put your .exe file's path into enviroment variable path. Go to "My computer -> properties -> advanced -> environment variables -> Path" and edit path by adding .exe's directory into path.
Another solution I personally prefer is using RapidEE for a smoother variable editing.
Rather than putting the executable into a directory on the path, you should create a batch file in a directory on the path that launches the program. This way you don't separate the executable from its supporting files, and you don't add other stuff in the same directory to the path unintentionally.
Such batch file can look like this:
#echo off
start "" "C:\Program Files (x86)\Software\software.exe" %*
Let's say my exe is C:\Program Files\AzCopy\azcopy.exe
Command/CMD/Batch
SET "PATH=C:\Program Files\AzCopy;%PATH%"
PowerShell
$env:path = $env:path + ";C:\Program Files\AzCopy"
I can now simply type and use azcopy from any location from any shell inc command prompt, powershell, git bash etc
It is very simple and it won't take more than 30 seconds.
For example the software called abc located in D:/Softwares/vlc/abc.exe
Add the folder path of abc.exe to system environment variables.
My Computer -> Click Properties -> Click Advanced system settings -> Click Environment Variables
Click on Ok.
now you can just open cmd prompt and you can launch the software from anywhere.
to use abc.exe just type abc in the command line.
it's amazing there's no simple solution for such a simple task on windows,
I created this little cmd script that you can use to define aliases on windows (instructions are at the file header itself):
https://gist.github.com/benjamine/5992592
this is pretty much the same approach used by tools like NPM or ruby gems to register global commands.
Simple Bash-like aliases in Windows
To get global bash-like aliases in Windows for applications not added to the path automatically without manually adding each one to the path, here's the cleanest solution I've come up with that does the least amount of changes to the system and has the most flexibility for later customization:
"Install" Your Aliases Path
mkdir c:\aliases
setx PATH "c:\aliases;%PATH%"
Add Your Alias
Open in New Shell Window
To start C:\path to\my program.exe, passing in all arguments, opening it in a new window, create c:\aliases\my program.bat file with the following contents(see NT Start Command for details on the start commmand):
#echo off
start "myprogram" /D "C:\path to\" /W "myprogram.exe" %*
Execute in Current Shell Window
To start C:\path to\my program.exe, passing in all arguments, but running it in the same window (more like how bash operates) create c:\aliases\my program.bat file with the following contents:
#echo off
pushd "C:\path to\"
"my program.exe" %*
popd
Execute in Current Shell Window 2
If you don't need the application to change the current working directory at all in order to operate, you can just add a symlink to the executable inside your aliases folder:
cd c:\aliases\
mklink "my program.exe" "c:\path to\my program.exe"
Add to the PATH, steps below (Windows 10):
Type in search bar "environment..." and choose Edit the system environment variables which opens up the System Properties window
Click the Environment Variables... button
In the Environment Variables tab, double click the Path variable in the System variables section
Add the path to the folder containing the .exe to the Path by double clicking on the empty line and paste the path.
Click ok and exit. Open a new cmd prompt and hit the command from any folder and it should work.
If you want to be able to run it inside cmd.exe or batch files you need to add the directory the .exe is in to the %path% variable (System or User)
If you want to be able to run it in the Run dialog (Win+R) or any application that calls ShellExecute, adding your exe to the app paths key is enough (This is less error prone during install/uninstall and also does not clutter up the path variable)
You may also permanently (after reboots) add to the Path variable this way:
Right click My Computer -> Click Properties -> Click Advanced system settings -> Click Environment Variables
Reference: Change System/User Variables
Put it in the c:\windows directory or add your directory to the "path" in the environment-settings (windows-break - tab advanced)
regards,
//t
In order to make it work
You need to modify the value of the environment variable with the name key Path, you can add as many paths as you want separating them with ;. The paths you give to it can't include the name of the executable file.
If you add a path to the variable Path all the excecutable files inside it can be called from cmd or porweshell by writing their name without .exe and these names are not case sensitive.
Here is how to create a system environment variable from a python script:
It is important to run it with administrator privileges in order to make it work. To better understand the code, just read the comments on it.
Tested on Windows 10
import winreg
# Create environment variable for call the program from shell, only works with compiled version
def environment_var(AppPath):
# Point to the registry key of the system environment variables
key = winreg.CreateKey(winreg.HKEY_LOCAL_MACHINE, r'System\CurrentControlSet\Control\Session Manager\Environment')
def add_var(path):
# Add the variable
winreg.SetValueEx(key, 'Path', 0, winreg.REG_SZ, path)
winreg.CloseKey(key)
try:
# Try to get the value of the Path variable
allPaths = winreg.QueryValueEx(key, 'Path')[0]
except Exception:
# Create the Path variable if it doesn't exist
add_var(path=AppPath)
return
# Get all the values of the existing paths
Path=allPaths.split(';')
# If the Path is empty, add the application path
if Path == ['']:
add_var(path=AppPath)
return
# Check if the application path is in the Path variable
if AppPath not in Path:
# Add the application path to the Path environment variable and add keep the others existing paths
add_var(path=AppPath+';'+allPaths)
# Only run this if the module is not imported by another
if __name__ == "__main__":
# Run the function
environment_var(AppPath=".")
You can find more information in the winreg documentation
You can also move your files to C:\Windows, but you need to use Administrator privileges and pay attention.
What did I mean with pay attention?
You need pay attention because you can also do some messes with Windows system files (Windows may not even work anymore) if you modify, delete, and do some changes incorrectly and accidentally in this folder...
Example: Don't add a file that have the same name of a Windows file
This worked for me:
put a .bat file with the commands you need (I use to run .py script into this) into a FOLDER,
go in the variable environment setting (type var in the search bar and it will show up)
in the global settings
choose path,
then modify,
then add the path to your .bat file (without the .bat file)
close everything: done.
Open the cmd, write the name of the .bat file and it will work
Example
Want to open chrome on a specific link
create a .bat file with this (save it as blog.bat for example)
start "" "https://pythonprogramming.altervista.org/"
go in enviromental variable settings from the search bar in the bottom left of the window desktop
go in enviromental variables (bottom button) then in path (bottom)
add the path, for example G:\myapp_launcher
click apply or ok
Now open cmd and write blog: chrome will open on that page
Do the same to open a file... create a .bat in the folder G:\myapp_launcher (or whatever you called the folder where you put the batch file), call it run.bat or myapp.bat or whatever (write inside of it start filemane.pdf or whatever file you want to open) and after you saved it, you can run that file from cmd with run or myapp or whatever you called your batch file.
Use a 1 line batch file in your install:
SETX PATH "C:\Windows"
run the bat file
Now place your .exe in c:\windows, and you're done.
you may type the 'exename' in command-line and it'll run it.
Another way could be through adding .LNK to your $PATHEX.
Then just create a shortcut to your executable (ie: yourshortcut.lnk) and put it into any of the directories listed within $PATH.
WARNING NOTE:
Know that any .lnk files located in any directories listed in your $PATH are now "PATH'ed" as well. For this reason, I would favor the batch file method mentionned earlier to this method.
I'm not a programmer or anything of the sort, but here's my simple solution:
Create a folder in which you'll be putting SHORTCUTS for all the programs you want to register;
Add that folder to the PATH;
Put all the shortcuts you want in the folder you created in the first step (context menu, New, Shortcut...) The SHORTCUT NAME will have be the be summoned when calling the program or function... NOT THE TARGET FILE NAME.
This will keep you from unintentionally putting files you don't want in the PATH.
Feel free to drop a comment if you think this answer needs to be improved. Cheers 🍻.
P.S. No system or File Explorer restart needed. 😀
Best way is to add the folder path for the .EXE file to Path values in the environment variable.
I'm not sure what versions of Windows this works with, but I put some useful .bat and .exe files into:
%LOCALAPPDATA%\Microsoft\WindowsApps
(equivalent to %USERPROFILE%\AppData\Local\Microsoft\WindowsApps)
which seems to be on my default PATH. I'd be interested to see if this were the general case.
DOSKEY is a Microsoft version of 'alias'. That function is already built into all versions of Windows (and most versions of DOS)
doskey fred=c:\myApps\myprog.exe
You'll want to load that every time you open a command prompt. Which you can do by any number of different methods. One way is to
Make a file containing all the doskey macros you want:
doskey fred=c:\whatever.exe
doskey alan=c:\whateverelse.exe
Change the file type / file name / file extension to .CMD or .BAT
ren myfile.txt myfile.CMD
Add the CMD/BAT file to your command processor autoruns key:
reg ADD \\HKCU\Software\Microsoft\Command Processor /v autorun /t REG_SZ /d myfile.CMD
For more information see
https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/doskey
and
https://serverfault.com/a/1049766/142882
(serverfault.com/questions/95404/is-there-a-global-persistent-cmd-history)
Should anyone be looking for this after me
here's a really easy way to add your Path.
Send the path to a file like the image shows,
copy and paste it from the file and add the
specific path on the end with a preceding semicolon
to the new path. It may be needed to be adapted prior
to windows 7, but at least it is an easy starting point.
Command Prompt Image to Export PATH to text file
The best way to do this is just install the .EXE file into the windows/system32 folder. that way you can run it from any location. This is the same place where .exe's like ping can be found
i am using 'Bat to Exe Converter' to convert my batch files to exe format.
Now, i am running into some problems.
Whenever i convert something, and i set 'Working Directory' to 'Current Directory', and i start my exe in echo on mode, this is what i end up with to check if there is a specific file in the directory of my exe:
the actual command: if not exist "%~dp0\file.txt" goto :nofile
output: if not exist "C:\Users\MyUser\AppData\Local\Temp\4CBC\\file.txt" goto :nofile
Can anyone help me with this? I don't want it in the temp directory, i want it to be in the directory of my exe.
Thanks.
Without having Bat to Exe changed by the author, I think you have two options:
Remove the need for accessing %~dp0
Perhaps you can merge file.txt with the include option of Bat to Exe into the EXE file. If so, "file.txt" will automatically be unpacked in the current directory when running your compiled exe, and you can it access by %CD%\file.txt.
Get %~dp0 from outside and pass it to the exe as a command line parameter.
This can be done by a simple starter bat file that resides in the same directory as your compiled main batch file. This script schould contain the line
YourCompiled.Exe %~dp0% %%*
Your compiled exe then gets its directory from %1. So you cannot pack everything into one exe, but the main portion of it, perhaps that is sufficient for you.
Well, apparently your batch to exe converter simply packs the batch file and extracts it to a temporary directory prior to execution. Very simplistic, hard to get wrong (compared to actually understand the batch file) but it introduces errors such as the one you're describing.
Your best bet is probably to use another batch to exe converter; some of them are actually a little more sophisticated.
Generally, this is not a good idea. firstly, its prone to errors and instability of the converter on different cmd features. secondly, a determined hacker can still decode what you are doing with the batch. My suggestion, if you are so afraid of people looking into your batch,
1) let only the people who are authorized to use your batch to use it
2) give them the correct permissions.
OR, don't use batch at all
1) create a central interface such as a web interface, where all tasks to be done goes through that interface, like using an ATM machine where only buttons are allowed and all the available user options can be done by pushing buttons...etc..
2) authenticate your users through a central authentication system, eg Active Directory, or LDAP or a database.
This is an 2.5 yr old subject but there is an answer to this so I'm posting for anyone else that happens to find this in a search.
B2EC written by Fatih Kodak, has an option to "Submit current directory".
When this is used, you can reference %1 in your batch file to get the path of the EXE that was executed (instead of the path of the extracted BAT that is really being run).
Hovering over that option in the UI shows "Submit the current working directory as the last parameter". The "last parameter" in my use has always been %1 but you can test your code to be sure.
The latest version, 2.1.4 at time of writing, of Bat to Exe by Fatih Kodak creates an Environmental Variable at runtime that can be substituted in place of %~dp0 to reference the Exe's path. Therefore, you can simply replace %-dp0 with %b2eprogrampathname% in the original batch file.
You can use external folders with f2ko's batch to exe converter. Having
a separate folder for subroutines can neaten up a project folder.
To call mysubroutine that is located in mysubroutinesfolder\mysubroutine,
...
pushd mysubroutinesfolder
call mysubroutine
popd
...
The call can be made a one liner:
call xqt mysubroutine
where xqt.cmd is a program that does the call for you:
pushd mysubroutinesfolder
call %*
popd
exit /b
(the %* means "all of the arguments").
In this way your batch programs run as batch, and UNMODIFIED they will
compile with the bat to exe converter, creating a completely folder independent executable. Select "temporary directory",
and include all of the subroutines/executables in your mysubroutines folder
by "selecting them all" with your cursor as usual, then hit "copy".
Be sure to include the xqt.cmd program too; place it "outside" of your mysubroutines folder. Make sure that is is accessible by your main program. Remember to select x64 if you
are runnning on a x64 machine, or the executable will not find SYSTEM32
files. You can find f2k0's batch to exe converter at:
http://www.f2ko.de/programs.php?pid=b2e
Try this development environment for batch scripts, Batch Compiler . It has everything you need to develop a batch program.And compile into stable stand alone executable (Exe).
Friendly user interface.
Debugger, Check your code for syntax errors.
Powerful, versatile compiler.
Allows mouse input in batch files.
Use Windows Common Dialog Boxes.(BrowseFiles,BrowseFolders)
Draw graphics in batch files.
Reverse engineering proof encryption of source code.
Include Company name, Copyright info and Version info.
Make invisible(silent) executables.
Executables with administrator privileges.
Run & debug your script while editing.
Embed resources with executable.(music,images,files)
Advance Commands (BrowseFiles,LaunchSilent,MouseCMD)
Stand-alone executables.No dependencies needed.
Executables are woking on almost all windows operating systems.(98 to 10)
Quick download : http://bc.gotek.info/files/BatchCompiler159.zip
Cheers!
%cd% will give you the current directory:
if not exist "%CD%\file.txt" goto :nofile
Use %CD% instead of %~dp0.
EDIT:
B2EC is not a real converter. Creation location of equipped .cmd file was chosen to be %TEMP% and this is a good choice. Application just lacks 3rd option for working directory of the script - .exe file directory. I advise you to mail the author about adding this one.
Different paths for .exe and created .cmd lead to information loss, i.e. we are unable to know .exe directory and current directory at the same time without providing additional information to the script (e.g. using environment variable or passing it as first/last argument to the script). This script would need to handle it and we would end writing cmd scripts tailored for this converter, which is bad.
%~dp0 - script directory (%TEMP%/.../) - practically useless
%cd% - working directory (as set up in the converter) - currently there are only 2 options: current directory (working directory of .exe) and temporary directory (actually equal to %~dp0, but without trailing backslash)
I think it can be solved by patching cmd.exe instance in memory to change the script path, but that's B2EC developer's duty.
Side note: Normal executable files can be easily executed with specified 0th argument by providing appriopriate lpApplicationName and lpCommandLine to CreateProcess function. Command files are executed via cmd.exe, so 0th argument cannot be set this way.