I'm unable to update the ipython on an Ubuntu 14.04 machine. The actual installed version is 1.2.1
I've tried:
$ sudo pip install --upgrade ipython[all]
But it returns
Requirement already up-to-date: ipython[all] in /usr/local/lib/python2.7/dist-package
And the version remains the same. I'm not sure where I messed up.
Thanks
I guess the Ubuntu package ipython is also installed so you have actually 2 versions of ipython installed. You can try to uninstall the Ubuntu package
sudo apt-get uninstall ipython
Then you might have to upgrade Ipython with pip.
Related
I installed jupyter notebook with pip using python -m pip install jupyter and nbextensions using pip install jupyter_contrib_nbextensions && jupyter contrib nbextension install
My current jupyter-notebook version is 6.1.6 which makes nbextensions to show blank tab as per this thread . However the solution is to downgrade the notebook to 6.1.5 version.
How do I do that using pip?
pip install notebook==6.1.5 will downgrade the jupyter notebook
You can specify a version number:
pip install jupyter-notebook==6.1.5
This question is for a Windows 10 laptop. I'm currently trying to install tensorflow, however, when I run:
pip install --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-1.0.0-cp35-cp35m-win_x86_64.whl
I get the following error:
tensorflow-1.0.0-cp35-cp35m-win_x86_64.whl is not a supported wheel on this platform.
I am trying to install the cpu-version only of tensorflow in an Anaconda 4.3.0 version. I had python 3.6.0 and then I downgraded to 3.5.0, none of them worked.
I also had same problem when I installed anaconda 4.3 version
Here is my solution.
Instead of using Anaconda3 4.3, install Anaconda3 4.2(Anaconda3-4.2.0-Windows-x86_64.exe)
Type on command line(If you are using GPU version)
pip install -U --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/gpu/tensorflow_gpu-1.0.0-cp35-cp35m-win_amd64.whl
Typeon command line(If you are using CPU only)
pip install -U --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-1.0.0-cp35-cp35m-win_amd64.whl
I'm working on win10 with python version=3.5.2, 64 bit
You can use same version of anaconda and execute this command
conda create -n tensorflow python=3.5
activate tensorflow
pip install tensorflow-gpu
It worked for conda 4.0.8
So are you sure you correctly downgraded your python? Run this command on command line pip -V. This should print the pip version and the python version.
Inside your Anaconda environment, try running this:
pip install --upgrade tensorflow
This will do the job. The issue was discussed here also.
Here is the screenshot of how this helped me:
If you have python3 on Windows insatalled, you can use the following command(non GPU):
pip install --upgrade https://storage.googleapis.com/tensorflow/mac/cpu/tensorflow-0.10.0-py3-none-any.whl
Worked for me.
Edit:
According to the pip website (https://pip.pypa.io/en/stable/installing), I should already have pip installed with my Python version 2.9.7, but I assumed that I don't because of the error message.
I then attempted to install pip by downloading get-pip.py. It was successful but I got the messages:
Found existing installation: pip 1.3.1
Uninstalling pip-1.3.1:
Successfully uninstalled pip-1.3.1
Successfully installed pip-8.1.1 wheel-0.29.0
So it seems I did have a version of pip, so I'm not sure why I was getting the error message described in my original post.
But when I tried to then pip install jupyter, I just get:
-bash: pip: command not found
again. Can someone tell me what I'm doing wrong please?
I need to install iPython Notebook. I already have Python (version 2.7.9) installed on my Macbook, running OS X (version 10.7.5).
After some initial investigation, I saw somebody say that I could just run:
pip install "ipython[notebook]"
When I did this however, I got:
-bash: pip: command not found
So do I have to install pip first? And then use pip to install the Notebook? I'm out of my depth and a little confused!
Okay so my problem was that pip was installed, but in a location that was not included in my $PATH variable.
One of the answers here is relevant.
There are already two posts on stack overflow on this topic; however, none of them have resolved or addressed my specific situation.
I have installed pytest via pip install pytest. I am able to import the library in Python as well.
The problem is that when I try to use the py.test command in Terminal, I get py.test: command not found.
Does anyone have any insight as to why I am not able to use the command in the terminal?
EDIT: It even shows up as an installed package:
$ pip list
cycler (0.9.0)
matplotlib (1.5.1)
numpy (1.10.1)
pip (8.1.0)
py (1.4.31)
pyparsing (2.0.7)
pytest (2.9.0)
python-dateutil (2.4.2)
pytz (2015.7)
scipy (0.17.0)
setuptools (7.0)
six (1.10.0)
tensorflow (0.5.0)
vboxapi (1.0)
wheel (0.26.0)
using python -m pytest will work for you.
Or if you using virtual environment and installed pytest on virtualenv you should then run py.test alongside your virtual environment.
Check this website can be useful:http://pythontesting.net/framework/pytest/pytest-introduction/
I already had the latest version of pytest on macOS with Homebrew-installed Python 2.7 and this fixed it:
pip uninstall pytest
pip install pytest
Are you on a mac with homebrew by any chance?
I had the same issue and it basically came down to permissions/conflict with the mac os base installed python. pip install would not install or link stuff into /usr/local/bin (it happened with both virtualenv and pytest).
I uninstalled python 2.7 completely with homebrew (brew uninstall python).
Next, I reinstalled python with homebrew to fix pip (it was not a symlink in /usr/local/bin/pip where it should have been linked to Cellar) -- brew install python
Then I uninstalled pip with sudo -- sudo python -m pip uninstall pip to remove the pip owned by root
Now I uninstalled and reinstalled python with homebrew again to reinstall pip with the correct permissions brew uninstall python && brew install python
Next I fixed the python symlinks brew link python
Finally, pip install pytest worked! (and so did pip install virtualenv)
I found the information in the chosen answer from this post very helpful:
https://superuser.com/questions/915810/pip-not-working-on-hombrew-python-2-7-install.
If you're not on a mac, sorry for the noise...
I may be late, but while exploring this I noticed that this can be because the Scripts folder for python is not present in the PATH.
For me this is my scripts folder:
C:\Python38\Scripts\
If the path is a problem then running pip install pytest should actually you give you the warning with the path it was added to.
This should be present in the path. If on windows, edit the environment variables and this location to the PATH.
For me the path was incorrect because of an improper installation of python
I had the same issue. I had pytest v2.8.3 installed and the binary was on my path but under the name py.test. Upgrading to v3.0.3 added the regular pytest executable to the path.
I had the same problem. I have changed the Python installed folder permission to full access. And then uninstalled the pytest and installed again.
pip uninstall pytest
In my case, I had a similar issue in ubuntu 20.04. The below solution worked for me.
Cause: Shell remembers the previous version or previously used Path, hence we need to force the shell to 'forget' the old location - with -r
hash -r pytest
Then execute the tests it should work fine.
For MAC users:
Download python universal installer for mac:
https://www.python.org/ftp/python/3.10.5/python-3.10.5-macos11.pkg
Then try to install pytest module in terminal using this command:
pip install pytest
Hope this will fix the issue. Thanks!
use the command, pip install -U pytest and install it in your cmd prompt, it will solve the issueenter image description here
I used macbook air m2, and the way I deal with this problem is:
Command in terminal in macbook:
which pytest
/opt/anaconda3/bin/pytest -> my terminal shows this
Then you got the path of pytest, in the "Command", before "pytest", add its path and following with the path of python file you wanna test.
/opt/anaconda3/bin/pytest /Users/cindyng/Desktop/Testing.py
Done, and if you cannot find the path of python in macbook, "which python" also helps, and you can put it in "Home" and "Custom Python Builder".
Hope that helps, good luck!
I Fixed this issue via below steps.
1.First uninstall existing pytest.
2.Check python version.
3.then verify pytest version is supported with python version or not via github issue tracker.
4. via sudo install pytest
sudo pip install pytest
5. verify pytest version and insatlled correctly or not.
pip list
pytest --version
6.run any test using pytest test_abc.py
I encounter the same problem, python -m pytest works for me.
when I try to install TensorFlow by cloning from Git, I run into the error "no module named copyreg," so I tried installing using a virtualenv. However, I then run into this error:
pip install https://storage.googleapis.com/tensorflow/mac/tensorflow-0.5.0-py2-none-any.whl
tensorflow-0.5.0-py2-none-any.whl is not a supported wheel on this platform.
I don't see this under the common problems section.
I am using OS X v10.10.5 (Yosemite) and Python 3.4.3, but I also have Python 2.7 (I am unsure if pip differentiates between these or how to switch between them).
I too got the same problem.
I downloaded get-pip.py from https://bootstrap.pypa.io/get-pip.py and then ran python2.7 get-pip.py for installing pip2.7.
And then ran the pip install command with python2.7 as follows.
For Ubuntu/Linux:
python2.7 -m pip install https://storage.googleapis.com/tensorflow/linux/cpu/tensorflow-0.5.0-cp27-none-linux_x86_64.whl
For Mac OS X:
python2.7 -m pip install https://storage.googleapis.com/tensorflow/mac/tensorflow-0.5.0-py2-none-any.whl
This should work just fine as it did for me :)
I followed these instructions from here.
After activating the virtualenv, be sure to upgrade pip to the latest version.
(your_virtual_env)$ pip install --upgrade pip
And now you'll be able to install TensorFlow correctly (for Linux):
(your_virtual_env)$ pip install --upgrade https://storage.googleapis.com/tensorflow/linux/cpu/tensorflow-0.7.0-py2-none-linux_x86_64.whl
I was trying to do the Windows-based install and kept getting this error.
It turns out you have to have Python 3.5.2. Not 2.7, not 3.6.x-- nothing other than 3.5.2.
After installing Python 3.5.2, the pip install worked.
Make sure that the wheel is, well, supported by your platform. Pip uses the wheel's filename to determine compatibility. The format is:
tensorflow-{version}-{python version}-none-{your platform}.whl
I didn't realize that x86_64 refers to x64, I thought it meant either x86 or x64, so I banged my head against this futilely for some time. TensorFlow is not available for 32-bit systems, unless you want to compile it yourself.
It seems that TensorFlow only works on Python 3.5 at the moment. Try to run this command before running the pip install
conda create --name tensorflow python=3.5
After this, run the following lines:
For CPU:
pip install --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-1.1.0-cp35-cp35m-win_amd64.whl
For GPU:
pip install --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/gpu/tensorflow_gpu-1.1.0-cp35-cp35m-win_amd64.whl
It should work like a charm.
On Windows 10, with Python 3.6.X version I was facing the same. Then after checking deliberately, I noticed I had Python-32 bit installation on my 64-bit machine. Remember TensorFlow is only compatible with a 64-bit installation of Python. Not 32 bit of Python
If we download Python from python.org, the default installation would be 32 bit. So we have to download the 64 bit installer manually to install Python 64 bit. And then add
C:\Users<username>\AppData\Local\Programs\Python\Python36
C:\Users<username>\AppData\Local\Programs\Python\Python36\Scripts
Then run gpupdate /Force on the command prompt. If the Python command doesn’t work for 64 bit, restart your machine.
Then run the Python interpreter on the command prompt. It should show 64 bit
python
Python 3.6.3 (v3.6.3:2c5fed8, Oct 3 2017, 18:11:49) [MSC v.1900 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
Then run the below command to install the TensorFlow CPU version (recommended)
pip3 install --upgrade tensorflow
The pip wheel file contains the Python version in its name (cp34-cp34m). If you download the .whl file and rename it to say py3-none or instead, it should work. Can you try that?
The installation won't work for Anaconda users that choose Python 3 support, because the installation procedure is asking to create a Python 3.5 environment and the file is currently called cp34-cp34m. So renaming it would do the job for now.
sudo pip3 install --upgrade https://storage.googleapis.com/tensorflow/linux/gpu/tensorflow-0.7.0-cp34-cp34m-linux_x86_64.whl
This will produce the exact error message you got above. However, when you will download the file yourself and rename it to "tensorflow-0.7.0-py3-none-linux_x86_64.whl", then execute the command again with the changed filename, it should work fine.
For Windows 10 64 bit:
I have tried all the suggestions here, but finally I got it running as follows:
Uninstall all current versions of Python
Remove all Python references in the PATH system and user environment variables
Download the latest 64-bit version of Python 3.8: Python 3.8.7 currently, not the latest 3.9.x version which is the one I was using, and not 32 bit.
Install with all options selected, including pip, and including the PATH environment variable
pip install tensorflow (in an administrator CMD prompt)
Upgrade pip if prompted (optional)
Actually, you can use Python 3.5.*.
I successfully solved this problem with Python 3.5.3. Modify the Python version to 3.5.* in Conda. See Managing Python.
Then go to https://www.tensorflow.org/install/install_windows, and repeat from "Create a Conda environment named tensorflow by invoking the following command" bla, bla...
Maybe you are installing the wrong pre-build binary?
Check on https://github.com/lakshayg/tensorflow-build
For my Coffee Lake processor on Ubuntu 18.04 (Bionic Beaver) the download URL was:
https://github.com/lakshayg/tensorflow-build/releases/download/tf1.12.0-ubuntu18.04-py2-py3/tensorflow-1.12.0-cp36-cp36m-linux_x86_64.whl
pip install --ignore-installed --upgrade <PATH>
resolved the issue for me.
I was trying to install from source and got that error. (Why would a wheel built on this machine not be compatible with it?)
For me, the tag --ignore-installed made all the difference.
pip install --ignore-installed /tmp/tensorflow_pkg/tensorflow-1.8.0-cp36-cp36m-linux_x86_64.whl
worked, while
pip install /tmp/tensorflow_pkg/tensorflow-1.8.0-cp36-cp36m-linux_x86_64.whl
threw the abovementioned error.
Context: Conda environment; it might have been a problem specific to this
I was trying to install CPU TensorFlow on Ubuntu 18.04 (Bionic Beaver), and the best way (for me...) I found for it was using it on top of Conda, for that:
To create a Conda ‘tensorflow’ environment. Follow How to Install Anaconda on Ubuntu 18.04
After all is installed, see Getting started with conda. And use it according to Managing environments
conda create --name tensorflow
source activate tensorflow
pip install --upgrade pip
pip uninstall tensorflow
For CPU: pip install tensorflow-cpu, for GPU: pip install tensorflow
pip install --ignore-installed --upgrade tensorflow
Test TF E.g. on 'Where' with:
python
import tensorflow as tf
>>> tf.where([[True, False], [False, True]])
Expected result:
<tf.Tensor: shape=(2, 2), dtype=int64, numpy=
array([[0, 0],
[1, 1]])>
After the Conda upgrade, I got:
DeprecationWarning: 'source deactivate' is deprecated. Use 'conda deactivate'.
So you should use:
‘conda activate tensorflow’ / ‘conda deactivate’
I faced the same issue and tried all the solutions that folks suggested here and other links (like Platform not supported for TensorFlow on Ubuntu 14.04.2).
It was so frustrating because using print(wheel.pep425tags.get_supported()) I could see that my Ubuntu supported ('cp37', 'cp37m', 'linux_x86_64') and that was exactly what I was trying to install (from https://storage.googleapis.com/tensorflow/linux/cpu/tensorflow-1.14.0-cp37-cp37m-linux_x86_64.whl).
What at the end fixed it was to simply download the package first and then
pip install tensorflow-1.14.0-cp37-cp37m-linux_x86_64.whl
It means that the version of your default Python interpreter (python -V) and the version of your default pip (pip -V) do not match. You have built TensorFlow with your default Python interpreter and trying to use a different pip version to install it.
In Mac, delete /usr/local/bin/pip and rename (copy) pipx.y (whatever x.y version that matches your Python version) to pip in that folder.
This worked for me.
system requirement Python 3.7–3.10
macOS 10.12.6 (Sierra) or later (no GPU support)
pip install tensorflow-macos