autoreconf: command not found in Cygwin on Windows - windows

I'm trying to compile the nDPI library in using Cygwin on Windows. When I try to run autogen.sh file I get the following error
./autogen.sh: line 5: autoreconf: command not found
I've been looking around now for four days to compile this nDPI library on Windows, and I DO NEED to compile it on Windows.
How do I compile this library on Windows?, OR
Is there a link that actually works and I can follow their steps to compile this library?
Here is the autogen.sh
#!/bin/sh
/bin/rm -f configure config.h config.h.in src/lib/Makefile.in
autoreconf -ivf
./configure

Try install autoconf, automake and libtool. It's under Devel of the Cygwin setup program.

To build MSYS tools, you should use the autotools provided in the MSYS System Builder package:
http://sourceforge.net/project/showfiles.php?group_id=2435&package_id=227249
autoconf-2.61-MSYS-1.0.11-1.tar.bz2
automake-1.10-MSYS-1.0.11-1.tar.bz2
libtool1.5-1.5.25a-20070701-MSYS-1.0.11-1.tar.bz2
Unpack them to the same location you extracted msys package.

I think you have to first solve the errors, since they indicate that you are lacking of some of the essential libraries. For example, the autoconf library...
If you are using Cygwin, you can get apt-cyg by:
lynx -source rawgit.com/transcode-open/apt-cyg/master/apt-cyg > apt-cyg
install apt-cyg /bin
After that, you can use apt-cyg install xxx to install the lacking libraries.

Related

exec: "gcc": executable file not found in %PATH% when trying go build

I am using Windows 10. When I tried to build Chaincode it reported this error
# github.com/hyperledger/fabric/vendor/github.com/miekg/pkcs11
exec: "gcc": executable file not found in %PATH%
My chaincode imports:
import (
"fmt"
"strconv"
"github.com/hyperledger/fabric/core/chaincode/shim"
pb "github.com/hyperledger/fabric/protos/peer"
)
It's running fine in Docker.
gcc (the GNU Compiler Collection) provides a C compiler. On Windows, install TDM-GCC. The github.com/miekg/pkcs11 package uses cgo. Cgo enables the creation of Go packages that call C code.
If you are running Ubuntu do:
apt-get install build-essential
This solved the problem. It installs the gcc/g++ compilers and libraries.
I also encountered this message, but in my case, it was missing gcc.exe. I used choco and installed mingw, and then it worked.
details:
download choco
choco install mingw -y
check: gcc -v
1) Install .exe from > https://sourceforge.net/projects/mingw-w64/
1.2) ! use x86_64 architecture
2) Add C:\Program Files\mingw-w64\x86_64-8.1.0-posix-seh-rt_v6-rev0\mingw64\bin to PATH in User Variables and in System Variables. For me it works.
! To edit Path variable press Windows key, type 'path', choose 'Edit the system environment variables', click 'Environment Variables', find Path variable in System variables and in User variables then edit.
On Windows install http://tdm-gcc.tdragon.net/download, that is all.
If you are using an alpine based image with your Dockerfile
Install build-base which will be met with your requirements.
apk add build-base
$ go env
check CGO_ENABLED if its 1 change it to 0 by
$export CGO_ENABLED=0
For my case :
os: windows 10
command:
choco install mingw
install choco if not installed:
Link: https://www.liquidweb.com/kb/how-to-install-chocolatey-on-windows/
worked for me.
The proper explanations why go build does not work for hyperledger in Windows environment are given as other answers.
For your compilation purposes, just to make it work without installing anything extra, you can try the following
go build --tags nopkcs11
It worked for me. I hope same works for you too.
You can try - this is not a solution but a temp workaround
cgo_enabled=0 go build
Once you install gcc - and make sure %PATH has a way to find it (gcc.exe) - this should go away.
Also running this one will ensure the cgo_enabled variable will stay this way as long as terminal is open. That way you don't have to prefix it each time you do a build.
export cgo_enabled=0 go build
just followed instructions from following and it solve my issue
https://code.visualstudio.com/docs/cpp/config-mingw
it ask to install Mingw-w64 via MSYS2
important command is pacman -S --needed base-devel mingw-w64-x86_64-toolchain
then add C:\msys64\mingw64\bin to PATH
thanks
For Ubuntu, what worked for me was to simply run:
sudo apt install gcc
On Amazon Linux 2:
Install go
wget https://go.dev/dl/go1.18.1.linux-amd64.tar.gz
rm -rf /usr/local/go && tar -C /usr/local -xzf go1.18.1.linux-amd64.tar.gz
export PATH=$PATH:/usr/local/go/bin
Install gcc
sudo yum groupinstall "Development Tools"
I recommend using the package group, even though it can be done without it, because groupinstall gives you the necessary packages to compile software on Amazon Linux and Redhat, CentOS for that matter.
on Ubuntu its very easy but on windows need to do it:
download MinGW on http://www.mingw.org/
install on basic package Gcc-g++ (see this image)
add on environment Patch of windows variables.
restart and continue with "go get ..."
If you are running Ubuntu do:
sudo apt-get update
sudo apt-get install build-essential.
If the above commands do not work do:
sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) main universe"
The main component contains applications that are free software, can be freely redistributed and are fully supported by the Ubuntu team. & The universe component is a snapshot of the free, open-source, and Linux world.
Then install package by following command in terminal:
sudo apt-get update
sudo apt-get install build-essential.
For more info click here: https://itectec.com/ubuntu/ubuntu-problem-installing-build-essential-on-14-04-1-lts-duplicate/
Just add this to your Dockerfile
RUN apk add alpine-sdk
gcc should not be necessary, unless you are cross compiling for a non-windows platform, or use cgo.
If you still need gcc, however, you should install MinGW, which provides a gcc port for Windows (Cygwin and msys should also work, although I have never actually tested this).
Edit: I see from your error message now, that it is a dependency that requires gcc. If you didn't already know this, gcc is a c/c++ compiler, and in this case it is probably needed to compile c source files included by a dependency or sub-dependency.
Instruction to fix the "exec: “gcc”: executable file not found in %PATH%" error with MSYS2:
Download MSYS2.
Put MSYS2 folder into your $PATH.
Start the MSYS2 command line program.
Run this command: pacman -S gcc.
Kindly install the MINGW after GUI will automatically take.
http://mingw.org/wiki/Getting_Started
On Windows, you can install gcc by Scoop:
scoop install gcc
you need to download MingGW64
put MingGW64 folder into your $PATH
run go build xxx.go (with cgo library)
Hi jaswanth the main problem is that you haven't register your %GO_HOME%\pkg\tool\windows_amd64 to yuour Environment Path.
%GO_HOME% is the repository where you install your go at the first time.
same as other, just install tdm-gcc, but you can use its terminal, "MinGW", you can access it from start menu folder tdm-gcc, after start, browse to your project, and run it again
I'm a Windows user and I downloaded tdm-gcc (MinGW-w64 based) from the link below:
https://jmeubank.github.io/tdm-gcc/
After installation, it made a folder named "TDM-GCC-64".
I added "C:\TDM-GCC-64\bin" to my PATH, And it fixed my problem.

compiling ragel on mavericks

I have downloaded ragel source code and trying to compile it.
I am not able to configure it. getting following error on running
./configure --prefix=PREFIX
-bash: ./configure: No such file or directory
I have download all necessary command line compilation tools. not sure what is missing.
It's much easier to use MacPorts. So after installation:
$ sudo port install ragel
and it will take care of downloading dependencies, and will already know how to configure the project.

How can I install libtoolize in cygwin?

When I'm trying to build Apache Thrift source in cygwin, I'm getting error saying "Couldn't find libtoolize!". How can I install libtoolize in cygwin?
You will need GNU M4 1.4.6 or later to install LibTool (which includes libtoolize).
Good news is that you can easily do it if you run the Cygwin installer (no worries, it will keep your Cygwin installation and add new packages if you select them). So all you need to do is to click on the following buttons:
GNU M4 installation
LibTool installation
'libtoolize' is a part of libtool. You can dowload latest version of libtool from http://ftp.gnu.org/gnu/libtool/, extract it, then run ./configure and make install from cygwin terminal.
Use this:
python -mpip get-install libtoolize

How do I compile jzmq for ZeroMQ on OSX?

Trying to follow the directions from: http://github.com/zeromq/jzmq
I installed pkg-config using Homebrew and then I run the following commands:
./autogen.sh
./configure
The configure fails with:
checking how to hardcode library paths into programs... immediate
./configure: line 15263: syntax error near unexpected token `newline'
./configure: line 15263: ` PKG_CHECK_MODULES('
A better solution is:
eval `brew --config | grep HOMEBREW_PREFIX | sed 's/: /=/'`
sudo bash -c 'echo '$HOMEBREW_PREFIX/share/aclocal' >> `aclocal --print-ac-dir`/dirlist'
This will allow the version of aclocal that ships with OSX to find any macros installed by homebrew packages.
With homebrew, the key is the warning message:
~/code/foss/java/jzmq$ brew install pkg-config
==> Downloading http://pkg-config.freedesktop.org/releases/pkg-config-0.25.tar.gz
==> ./configure --disable-debug --prefix=/usr/local/Cellar/pkg-config/0.25 --with-pc-path=/usr/local/lib/pkgconfig:/usr/lib/pkgconfig:/usr/X11/lib/pkgconfig
==> make install
Warning: m4 macros were installed to "share/aclocal".
Homebrew does not append "/usr/local/share/aclocal"
to "/usr/share/aclocal/dirlist". If an autoconf script you use
requires these m4 macros, you'll need to add this path manually.
==> Summary
/usr/local/Cellar/pkg-config/0.25: 8 files, 232K, built in 19 seconds
If you look at /usr/local/Cellar/pkg-config/0.25/share/aclocal/, you will see:
$ ls /usr/local/Cellar/pkg-config/0.25/share/aclocal/
pkg.m4
You need to append /usr/local/Cellar/pkg-config/0.25/share/aclocal/ to /usr/share/aclocal/dirlist,like this:
$ cat /usr/share/aclocal/dirlist
/usr/local/share/aclocal
/usr/local/Cellar/pkg-config/0.25/share/aclocal/
And then re-run autogen and the other steps.
I made a simple list about jzmq building for MacOS.
Install brew
https://brew.sh
Install tools for jzmq building
brew install autoconf
brew install automake
brew install libtool
brew install pkg-config
brew install zeromq#3.2
Download jzmq source
https://github.com/zeromq/jzmq source download to ~/somewhere/jzmq
Add symbolic link to /usr/local/include
cd /usr/local/include
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/include/zmq.h
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/include/zmq_utils.h
Add symbolic linke to /usr/local/lib
cd /usr/local/lib
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/lib/libzmq.3.dylib
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/lib/libzmq.a
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/lib/libmq.dylib
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/lib/pkgconfig/
Build jzmq-jni
cd ~/somewhere/jzmq
cd jzmq-jni
./autogen.sh
./configure
make
make install
Add option to VM options
VM options -Djava.library.path=/usr/local/lib
From the zeromq mailing list:
Building 0MQ from the development
trunk on a UNIX style OS (Linux, OS X)
requires that pkg-config
(http://pkg-config.freedesktop.org/wiki/)
be installed. A regular source build
of 0MQ does not require pkg-config.
On Mac OS X, pkg-config does not come
with the system, so when you try to do
./configure you may see errors like:
./configure: line 23913: syntax error near unexpected token `GLIB,'
./configure: line 23913: `PKG_CHECK_MODULES(GLIB, glib-2.0 gthread-2.0)'
To resolve this, you need to install
the latest pkg-config:
tar xzf pkg-config-0.25.tar.gz
cd pkg-config-0.25
./configure --prefix=/usr/local/pkg-config-0.25 --datarootdir=/usr/share
make
sudo make install
Then you will need to put
/usr/local/pkg-config-0.25/bin on your
$PATH. It is important to include the
"--datarootdir=/usr/share" option,
which will install the pkg.m4 file in
/usr/share/aclocal, where aclocal will
be able to find it.
Then you can build 0MQ:
cd zeromq2
./autogen.sh # must do this again after installing pkg-config
./configure # add other options here
make
sudo make install
Edited to reflect latest pkg-config version (0.25).
I came here with the same question, and I don't feel this is answered. I also installed ZeroMQ and pkg-config via Homebrew. /usr/local/share/aclocal/pkg.m4 exists and comes from pkg-config 0.25. It seems that Homebrew has satisfied the requirements listed but it still fails.
Trying to compile jzmq on Mac OS X, proved to be a bit of a headache. I followed the instructions above. I was still getting following error
syntax error near unexpected token
`PKG_CHECK_MODULES
The instructions above tell you to copy the pkgk.m4 file into /usr/share/aclocal, but your directory might be different. Basically you need the dir that automake searches for macro definitions.
The _PKG_CHECK_MODULES_ macro is defined in the pkg.m4 file. This file must be installed in the appropriate directory, which is searched by automake. Somehow automake is installed twice on my OS X, one in /usr and another in /Developer/usr. Make sure you know which one it's using. Just do which automake. If yours in is /Developer/usr, then copy the pkg.m4 file to /Developer/usr/share/aclocal.
For me, the problem was that I didn't have pkg-config installed.
On Osx Mountain Lion I don't have the dirlist file as Phil Calçado said, but a simple symlink from /usr/local/Cellar/pkg-config/[version]/share/aclocal/pkg.m4 to /usr/share/aclocal made the trick and now jzmq build fine.

Need help in compiling lighttpd on MacOSx

I try download lighttpd 1.4.23 source, and compile it on MacOSX 10.5.5.
This is the error I am getting:
$ ./autogen.sh
./autogen.sh: running `libtoolize --copy --force'
./autogen.sh: line 19: libtoolize: command not found
I tried ask the same question on lighttpd forum, but I can't get any help there.
Thanks in advance.
libtoolize is part of GNU libtool, a package for building libraries portably. On the Mac, one option for getting it is to use MacPorts, a package manager which works in a similar fashion as Gentoo and FreeBSD, in that it compiles packages on your machine. See http://www.macports.org/install.php.
Beware, though, that it will be installed as glibtoolize, i.e. with a 'g' prefixed. That is a standard way to make GNU tools live in parallel with UNIX tools of the same name, that might be present (even though there isn't one in this particular case).
The command for installing libtool from MacPorts is: sudo port install libtool
Add a '-d' flag after the 'port' command to see the build output.
Here's what I use to install lighttpd 1.4.25 on Mac OS X 10.6.2. If I remember correctly, the same thing worked for me in a recent version of Mac OS X 10.5.
Install Xcode Developer Tools
Either install them from the DVD that came with your Mac (under Optional Installs) or download them from Apple's developer page.
Install PCRE
curl -O http://softlayer.dl.sourceforge.net/project/pcre/pcre/7.9/pcre-7.9.tar.gz
tar xzf pcre-7.9.tar.gz
cd pcre-7.9
./configure
make && sudo make install
cd ../
Install lighttpd
curl -O http://download.lighttpd.net/lighttpd/releases-1.4.x/lighttpd-1.4.25.tar.gz
tar xzf lighttpd-*.tar.gz
cd lighttpd-*
./configure
make && sudo make install
Note that the URLs above will quickly go out of date; you may need to download the latest versions of the .tar.gz packages from a different location.

Resources