I am not sure how to approach this problem using regex.
Write a method that takes a string in and returns true if the letter "z" appears within three letters after an "a". You may assume that the string contains only lowercase letters.
Any insight would be greatly appreciated.
Basically, you're being asked to match any of the following patterns:
'a**z'
'a*z'
'az'
where * is a lowercase letter, a-z. In natural language (ok, English) that can be stated as "An 'a' followed by 0, 1, or 2 lowercase letters, followed by a 'z'. Regex-wise, that can be expressed as
/a[a-z]{0,2}z/
I'm not a rubyist at all, so there may or may not be some sort of Ruby specific tweaks that need to be made to that, but that should be the basic gist of it.
def foo s
!!(s =~ /a\w{,2}z/)
end
This is the site I like to use for Ruby Regex validations. rubular.com That being said, if you want to hit on a z that is 0 to 2 spaces after only an a, and the text is lowercase I would use this Regex string. [a]{0,2}z This regex string passed all three scenarios on Rubular and it will only hit on an a.
Related
Consider this example string:
mystr ="1. moody"
I want to capitalize the first letter that occurs in mystr. I am trying this regular expression in Ruby but still returns all the letters in mystr (moody) instead of the letter m only.
puts mystr.scan(/[a-zA-Z]{1}/)
Any help appreciated!
Do as below using String#sub
(arup~>~)$ pry --simple-prompt
>> s = "1. moody"
=> "1. moody"
>> s.sub(/[a-z]/i,&:upcase)
=> "1. Moody"
>>
If you want to modify the source string use s.sub!(/[a-z]/,&:upcase).
Just for completeness, although it doesn’t directly answer your question as posed but could be relevant, consider this variation:
mystr ="1. école"
The line mystr.sub(/[a-z]/i,&:upcase) (as in Arup Rakshit’s answer) will match the second letter of the word, producing
1. éCole
The line mystr.sub /\b\s?[a-zA-Z]{1}/, &:upcase (diego.greyrobot’s answer) won’t match at all and so the line will be unchanged.
There are two problems here. The first is that [a-zA-Z] doesn’t match accented characters, so é isn’t matched. The fix for this is to use the \p{Letter} character property:
mystr.sub /\p{Letter}/, &:upcase
This will match the character in question, but won’t change it. This is due to the second problem, which is that upcase (and downcase) only works on characters in the ASCII range. This is almost as easy to fix, but relies on using an external library such as unicode_utils:
require 'unicode_utils'
mystr.sub(/\p{Letter}/) { |c| UnicodeUtils.upcase(c)}
This results in:
1. École
which is probably what is wanted in this case.
This may not affect you if you are sure all your data is just ASCII, but is worth knowing for other situations.
The reason your attempt returns all the letters is because you are using the scan method which does just that, it returns all the characters which match the regex, in your case letters. For your use case you should use sub since you only want to substitute 1 letter.
I use http://rubular.com to practice my Ruby Regexes. Here's what I came up with http://rubular.com/r/fAQEDFVEVn
The regex is: /\b[a-z]/
It uses \b to find a word boundary, and finally we ask for one letter only with [a-zA-Z]
Finally we'll use sub to replace it with its upcased version:
"1. moody".sub /\b[a-z]/, &:upcase
=> "1. Moody"
Hope that helps.
I have a string such as this: "im# -33.870816,151.203654"
I want to extract the two numbers including the hyphen.
I tried this:
mystring = "im# -33.870816,151.203654"
/\D*(\-*\d+\.\d+),(\-*\d+\.\d+)/.match(mystring)
This gives me:
33.870816,151.203654
How do I get the hyphen?
I need to do this in ruby
Edit: I should clarify, the "im# " was just an example, there can be any set of characters before the numbers. the numbers are mostly well formed with the comma. I was having trouble with the hyphen (-)
Edit2: Note that the two nos are lattidue, longitude. That pattern is mostly fixed. However, in theory, the preceding string can be arbitrary. I don't expect it to have nos. or hyphen, but you never know.
How about this?
arr = "im# -33.2222,151.200".split(/[, ]/)[1..-1]
and arr is ["-33.2222", "151.200"], (using the split method).
now
arr[0].to_f is -33.2222 and arr[1].to_f is 151.2
EDIT: stripped "im#" part with [1..-1] as suggested in comments.
EDIT2: also, this work regardless of what the first characters are.
If you want to capture the two numbers with the hyphen you can use this regex:
> str = "im# -33.870816,151.203654"
> str.match(/([\d.,-]+)/).captures
=> ["33.870816,151.203654"]
Edit: now it captures hyphen.
This one captures each number separetely: http://rubular.com/r/NNP2OTEdiL
Note: Using String#scan will match all ocurrences of given pattern, in this case
> str.scan /\b\s?([-\d.]+)/
=> [["-33.870816"], ["151.203654"]] # Good, but flattened version is better
> str.scan(/\b\s?([-\d.]+)/).flatten
=> ["-33.870816", "151.203654"]
I recommend you playing around a little with Rubular. There's also some docs about regegular expressions with Ruby:
http://www.ruby-doc.org/docs/ProgrammingRuby/html/language.html#UJ
http://www.regular-expressions.info/ruby.html
http://www.ruby-doc.org/core-1.9.3/Regexp.html
Your regex doesn't work because the hyphen is caught by \D, so you have to modify it to catch only the right set of characters.
[^0-9-]* would be a good option.
I'm trying to match some text if it does not have another block of text in its vicinity. For example, I would like to match "bar" if "foo" does not precede it. I can match "bar" if "foo" does not immediately precede it using negative look behind in this regex:
/(?<!foo)bar/
but I also like to not match "foo 12345 bar". I tried:
/(?<!foo.{1,10})bar/
but using a wildcard + a range appears to be an invalid regex in Ruby. Am I thinking about the problem wrong?
You are thinking about it the right way. But unfortunately lookbehinds usually have be of fixed-length. The only major exception to that is .NET's regex engine, which allows repetition quantifiers inside lookbehinds. But since you only need a negative lookbehind and not a lookahead, too. There is a hack for you. Reverse the string, then try to match:
/rab(?!.{0,10}oof)/
Then reverse the result of the match or subtract the matching position from the string's length, if that's what you are after.
Now from the regex you have given, I suppose that this was only a simplified version of what you actually need. Of course, if bar is a complex pattern itself, some more thought needs to go into how to reverse it correctly.
Note that if your pattern required both variable-length lookbehinds and lookaheads, you would have a harder time solving this. Also, in your case, it would be possible to deconstruct your lookbehind into multiple variable length ones (because you use neither + nor *):
/(?<!foo)(?<!foo.)(?<!foo.{2})(?<!foo.{3})(?<!foo.{4})(?<!foo.{5})(?<!foo.{6})(?<!foo.{7})(?<!foo.{8})(?<!foo.{9})(?<!foo.{10})bar/
But that's not all that nice, is it?
As m.buettner already mentions, lookbehind in Ruby regex has to be of fixed length, and is described so in the document. So, you cannot put a quantifier within a lookbehind.
You don't need to check all in one step. Try doing multiple steps of regex matches to get what you want. Assuming that existence of foo in front of a single instance of bar breaks the condition regardless of whether there is another bar, then
string.match(/bar/) and !string.match(/foo.*bar/)
will give you what you want for the example.
If you rather want the match to succeed with bar foo bar, then you can do this
string.scan(/foo|bar/).first == "bar"
I am writing a hashtag scraper for facebook, and every regex I come across to get hashtags seems to include punctuation as well as alphanumeric characters. Here's an example of what I would like:
Hello #world! I am #m4king a #fac_book scraper and would like a nice regular #expression.
I would like it to match world, m4king, fac and expression (note that I would like it to cut off if it reaches punctuation, including spaces). It would be nice if it didn't include the hash symbol, but it's not super important.
Just incase it's important, I will be using ruby's string scan method to grab possibly more than one tag.
Thanks heaps in advance!
A regex such as this: #([A-Za-z0-9]+) should match what you need and place it in a capture group. You can then access this group later. Maybe this will help shed some light on regular expressions (from a Ruby context).
The regex above will start matching when it finds a # tag and will throw any following letters or numbers into a capture group. Once it finds anything which is not a letter or a digit, it will stop the matching. In the end you will end up with a group containing what you are after.
str = 'Hello #world! I am #m4king a #fac_book scraper and would like a nice regular #expression'
str.scan(/#([A-Za-z0-9]+)/).flatten #=> ["world", "m4king", "fac", "expression"]
The call to #flatten is needed because each capture group will be inside its own array.
Alternatively, you can use look-behind matching which will match alphanumeric characters only after a '#':
str.scan /(?<=#)[[:alnum:]]+/ #=> ["world", "m4king", "fac", "expression"]
Here's a simpler regex #[[:alnum:]_]/. Note it includes underscores because Facebook currently includes underscores as part of hashtags (as does twitter).
str = 'Hello #world! I am #m4king a #fac_book scraper and would like a nice regular #expression'
str.scan(/#[[:alnum:]_]+/)
Here's a view on Rubular:
http://rubular.com/r/XPPqwtVGN9
I'm not sure how to use regular expressions in a function so that I could grab all the words in a sentence starting with a particular letter. I know that I can do:
word =~ /^#{letter}/
to check if the word starts with the letter, but how do I go from word to word. Do I need to convert the string to an array and then iterate through each word or is there a faster way using regex? I'm using ruby so that would look like:
matching_words = Array.new
sentance.split(" ").each do |word|
matching_words.push(word) if word =~ /^#{letter}/
end
Scan may be a good tool for this:
#!/usr/bin/ruby1.8
s = "I think Paris in the spring is a beautiful place"
p s.scan(/\b[it][[:alpha:]]*/i)
# => ["I", "think", "in", "the", "is"]
\b means 'word boundary."
[:alpha:] means upper or lowercase alpha (a-z).
You can use \b. It matches word boundaries--the invisible spot just before and after a word. (You can't see them, but oh they're there!) Here's the regex:
/\b(a\w*)\b/
The \w matches a word character, like letters and digits and stuff like that.
You can see me testing it here: http://rubular.com/regexes/13347
Similar to Anon.'s answer:
/\b(a\w*)/g
and then see all the results with (usually) $n, where n is the n-th hit. Many libraries will return /g results as arrays on the $n-th set of parenthesis, so in this case $1 would return an array of all the matching words. You'll want to double-check with whatever library you're using to figure out how it returns matches like this, there's a lot of variation on global search returns, sadly.
As to the \w vs [a-zA-Z], you can sometimes get faster execution by using the built-in definitions of things like that, as it can easily have an optimized path for the preset character classes.
The /g at the end makes it a "global" search, so it'll find more than one. It's still restricted by line in some languages / libraries, though, so if you wish to check an entire file you'll sometimes need /gm, to make it multi-line
If you want to remove results, like your title (but not question) suggests, try:
/\ba\w*//g
which does a search-and-replace in most languages (/<search>/<replacement>/). Sometimes you need a "s" at the front. Depends on the language / library. In Ruby's case, use:
string.gsub(/(\b)a\w*(\b)/, "\\1\\2")
to retain the non-word characters, and optionally put any replacement text between \1 and \2. gsub for global, sub for the first result.
/\ba[a-z]*\b/i
will match any word starting with 'a'.
The \b indicates a word boundary - we want to only match starting from the beginning of a word, after all.
Then there's the character we want our word to start with.
Then we have as many as possible letter characters, followed by another word boundary.
To match all words starting with t, use:
\bt\w+
That will match test but not footest; \b means "word boundary".
Personally i think that regex is overkill for this application, simply running a select is more than capable of solving this particular problem.
"this is a test".split(' ').select{ |word| word[0,1] == 't' }
result => ["this", "test"]
or if you are determined to use regex then go with grep
"this is a test".split(' ').grep(/^t/)
result => ["this", "test"]
Hope this helps.