x=0
for i=1 to ceiling(log(n))
for j=1 to i
for k=1 to 10
x=x+1
I've included the answer I've come up with here:
I think the time complexity is θ(n^2 log(n)), but I am not sure my logic is correct. I would really appreciate any help understanding how to do this type of analysis!
Outermost loop will run for ceil(log n) times. The middle loop is dependent on the value of i.
So, it's behaviour will be :
1st iteration of outermost-loop - 1
2nd iteration of outermost-loop - 2
.....................................
ceil(log n) iteration of outermost-loop - ceil(log n)
Innermost loop is independent of other variables an will always run 10 times for each iteration of middle-loop.
Therefore, net-iterations
= [1*10 + 2*10 + 3*10 + ... + ceil(log n)*10]
= 10 * {1+2+...+ceil(log n)}
= 10 * { (ceil(log n) * ceil(log n)+1)/2} times
= 5 * [ceil(log n)]^2 + 5 * ceil(log n)
= Big-Theta {(log n)^2}
= Θ{(log n)^2}.
I hope this is clear to you. Hence, your answer is incorrect.
You have three loops. Lets consider one by one.
Innermost loop: It is independent of a n or i, and will run always 10 times. So time complexity of this loop is Theta(10).
Outermost loop: Very simply time complexity of this loop is Theta(logn).
Middle loop: As value of i can be upto logn time complexity of this loop is also O(logn)
Overall complexity: Theta(logn)*O(logn)*Theta(10) or O(logn*logn*10) or 10*O((logn)^2) or O((logn)^2)
Related
I have some exercises of complexity analysis of double loops, and I don't know if I'm doing them correctly.
for i = 1 to n do
j = i
while j < n do
j = 2∗j
end while
end for
My answer on this is O(n^2), because the first loop is running O(n) times and the inner one is doing O(n/2) iterations for the "worst" iteration of the outer loop. So O(n) * O(n/2) = O(n^2).
Also looking a bit further, I think I can say that the inner loops is doing a partial sum that is O(n/2) + O(n-1) + ... + O(1), and this is also O(n)
for i = 1 to n do
j = n
while i∗i < j do
j = j − 1
end while
end for
Again the outer loop is O(n), and the inner loop is doing O(sqrt(n)) in the worst iteration, so here I think it's O(n*sqrt(n)) but I'm unsure about this one.
for i = 1 to n do
j = 2
while j < i do
j = j ∗j
end while
end for
Here the outer loop is O(n) and the inner loop is doing O(logn) work for the worst case. Hence I think this is O(nlogn)
i = 2
while (i∗i < n) and (n mod i != 0) do
i = i + 1
end while
Finally, I don't know how to make sense of this one. Because of the modulus operator.
My questions are:
Did I do anything wrong in the first 3 examples?
Is the "worst-case approach" for the inner loops I'm doing correct?
How should I approach the last exercise?
First Question:
The inner loop takes log(n/i) time. an upper bound is O(log(n)) giving a total time of O(n*log(n)). a lower bound is log(n/2) and sum only on the last n/2 terms, giving a total complexity of n/2 * log(n/2) = n/2*log(n) - n/2 = O(n * log(n)) and we get that the bound O(n* log(n)) is tight (we have a theta bound).
Second Question:
The inner loop takes n - i^2 time (and O(1) if i^2 >= n). Notice that for i >= sqrt(n) the inner loop takes O(1) time so we can run the outer loop only for i in 1:sqrt(n) and add O(n) to the result. An upper bound is n for the inner loop, giving a total time of O(n * sqrt(n) + n) = O(n ^ (3/2)). A lower bound is 3/4 * n for the inner loop and summing only for i's up to sqrt(n) / 2 (so that i^2 < n / 4 and n - i ^ 2 > 3/4 * n ) and we get a total time of Ω(sqrt(n) / 2 * n * 3/4 + n) = Ω(n^(3/2)) thus the bound O(n * sqrt(n)) is indeed tight.
Third Question:
In this one j is starting from 2 and we square it until it reaches i. after t steps of the inner loop, j is equal to 2^(2^t). we reach i when j = 2 ^ (log(i)) = 2 ^ (2 ^ log(log(i))), i.e., after t = log(log(i)) steps. We can again give an upper bound and lower bound similarly to the previous questions, and get the tight bound O(n * log(log(n))).
Forth Question:
The complexity can vary between 2 = O(1) and sqrt(n), depending on the factorization of n. In the worst case, n is a perfect square, giving a complexity of O(sqrt(n)
To answer your questions at the end:
1. Yes, you have done some things wrong. You have reached wrong answers in 1 and 3 and in 2 your result is right but the reasoning is flawed; the inner loop is not O(sqrt(n)), as you have already seen in my analysis.
2. Considering the "worst case" for the inner loop is good, as it's giving you an upper bound (which is mostly accurate in this kind of questions), but to establish a tight bound you must also show a lower bound, usually by taking only the higher terms and lowering them to the first, as I did in some of the examples. Another way to prove tight bounds is to use formulas of known series such as 1 + ... + n = n * (n + 1) / 2, giving an immediate bound of O(n^2) instead of getting the lower bound by 1 + ... + n >= n/2 + ... + n >= n/2 + ... + n/2 = n/2 * n/2 = n^/4 = Ω(n^2).
3. Answered above.
For the first one in the inner loop we have:
i, 2*i, 4*i, ... , (2^k)*i where (2^k)*i < n. So k < logn - logi. The outer loop as you said repeats n+1 times. In total we have this sum:
Which equals to
Therefore I think the complexity should be O(nlogn).
For the second one we have:
For third one:
So I think it should be O(log(n!))
For the last one, if n is even, it will be O(1) because we don't enter the loop. But the worst case is when n is odd and is not divisible by any of the square numbers, then I think it should be
Given:
for (int i = 1; i <= n; i *= 2) {
for (int j = 0; j < i; j++) {
// Statement(s) that take(s) constant time
}
}
Running Time Complexity = O(n)
Explanation was:
I understand that the outer loop is log(n) and the inner loop is O(n).
But why time complexity is not O(n log n)? why it's O(n + log n)?
The partial sums calculation is correct. However, the total execution time explanation is unclear, although the result is indeed O(n).
The actual time is consumed by executing the inner statements and the number of these statements executions is defined by the loops. The method of partial sums already takes into consideration both loops (1 time unit for i=1, 2 time units for i=2, 4 time units for i=4, etc.) and in total the internal statements are executed O(n) times as shown by the partial sums calculation. Therefore, total time is O(n)*O(constant for the internal statements)=O(n). I don't see any reason to include the O(logn) in calculations here.
The outer loop runs log(n) times. But, in each time, the inner loop does not run in O(n). As shown in the explanation, if i = 1, the inner loop runs 1 time. If i = 2, the inner loop runs 2 times. If i = 4, the inner loop runs 4 times. Hence, the total number of running time is T(n) = 1 + 2 + 4 + ... + 2^log(n).
Now, simplify the T(n):
T(n) = 2^(log(n)+1) - 1 = 2^log(n) * 2 - 1 = 2n - 1 = Theta(n)
I was asked if what time complexity if this:
What is the time complexity (with respect of n) of this algorithm:
k=0
for(i = n / 2 ; i < n ; i++ ) {
for( j=0 ; j < i ; j++)
k = k + n / 2
}
choices was : a. O(n) b. O(n/2) c. O(n log(n) and d. O(n^2)
can have a multiple answers.
i know the algorithm above is d. O(n^2) but i came with with a. O(n) since it is looking for complexity of n only?.
if you are to have this question. how would you answer it.?? im so curious about the answer.
The answer is O(n²).
This is easy to understand. I will try to make you understand it.
See, the outer for loop block is executed n - n/2 = n/2 times.
Of course it depends whether the number n is even or odd. If it's even then the outer loop is executed n/2 times. If it's odd then it's executed for (n-1)/2 times.
But for time complexity, we don't consider this. We just assume that the outer for loop is executed n/2 times where i starts from n/2 and ends at n - 1 (because the terminating condition is i < n and not i <= n).
For each iteration of the outer loop, the inner loop executes i times.
For example, for every iteration, inner loop starts with j = 0 to j = i - 1. This means that it executes i times (not i - 1 times because j starts from 0 and not from 1).
Therefore, for 1st iteration the inner loop is executed i = n / 2 times. i = n / 2 + 1 for 2nd iteration and so on upto i = n - 1 times.
Now, the total no. of times the inner loop executes is n/2 + (n/2 + 1) + (n/2 + 2) + ... + (n - 2) + (n - 1). It's simple math that this sums up to (3n² - n)/2 times.
So, the time complexity becomes O((3n² - n)/2).
But we ignore the n term because n² > n and the constant terms because for every n they will remain the same.
Therefore, the final time complexity is O(n²).
Hope this helps you understand.
I'm learning Big-O notation right now and stumbled across this small algorithm in another thread:
i = n
while (i >= 1)
{
for j = 1 to i // NOTE: i instead of n here!
{
x = x + 1
}
i = i/2
}
According to the author of the post, the complexity is Θ(n), but I can't figure out how. I think the while loop's complexity is Θ(log(n)). The for loop's complexity from what I was thinking would also be Θ(log(n)) because the number of iterations would be halved each time.
So, wouldn't the complexity of the whole thing be Θ(log(n) * log(n)), or am I doing something wrong?
Edit: the segment is in the best answer of this question: https://stackoverflow.com/questions/9556782/find-theta-notation-of-the-following-while-loop#=
Imagine for simplicity that n = 2^k. How many times x gets incremented? It easily follows this is Geometric series
2^k + 2^(k - 1) + 2^(k - 2) + ... + 1 = 2^(k + 1) - 1 = 2 * n - 1
So this part is Θ(n). Also i get's halved k = log n times and it has no asymptotic effect to Θ(n).
The value of i for each iteration of the while loop, which is also how many iterations the for loop has, are n, n/2, n/4, ..., and the overall complexity is the sum of those. That puts it at roughly 2n, which gets you your Theta(n).
What is the time complexity of this algorithm:
sum = 0
i = 1
while (i < n) {
for j = 1 to i {
sum = sum + 1
}
i = i*2;
}
return sum
I know that the while loop is O(logn), but what is the complexity of the for loop? Is it O(n) or O(logn)?
One way to analyze this would be to count up the number of iterations of the inner loop. On the first iteration, the loop runs one time. On the second iteration, it runs two times. It runs four times on the third iteration, eight times on the fourth iteration, and more generally 2k times on the kth iteration. This means that the number of iterations of the inner loop is given by
1 + 2 + 4 + 8 + ... + 2r = 2r + 1 - 1
Where r is the number of times that the inner loop runs. As you noted, r is roughly log n, meaning that this summation works out to (approximately)
2log n + 1 - 1 = 2(2log n) - 1 = 2n - 1
Consequently, the total work done by the inner loop across all iterations in O(n). Since the program does a total of O(log n) work running the outer loop, the total runtime of this algorithm is O(n + log n) = O(n). Note that we don't multiply these terms together, since the O(log n) term is the total amount of work done purely in the maintenance of the outer loops and the O(n) term is total amount of work done purely by the inner loop.
Hope this helps!