Using the mouse I am drawing 2D shapes on the client area of a MDIChildFrame. Recently I have added a wxToolBar to the frame and when I now draw a shape on the client area it seems that the points have shifted by the size the toolbar. Imagine that with mouse I am clicking on (100,100) and drawing a line to (150,150); however, the line appears somewhere (75,75) to (125,125). By the way, wxMouseEvent GetPosition(); reports (100,100) to me.
Removing the toolbar fixes the problem however, I want to keep the toolbar for ease of tool selection.
I use the code:
m_ToolBar=new wxToolBar(this, wxID_ANY);
m_ToolBar->AddTool() //
m_ToolBar->Realize();
this->SetToolBar(m_ToolBar);
Any ideas will be appreciated.
You can always use wxWindow::GetClientAreaOrigin() to manually offset the coordinates by the toolbar height but normally this shouldn't be necessary, and if this doesn't happen with a "normal" frame but only happens with wxMDIChildFrame it would be a bug in wxWidgets that should be reported as usual.
It's also recommended to not draw over wxFrame itself but rather put a wxWindow into it and draw on it. This should also take care of your problem.
Related
I got a small problem and I can’t really find the source of it. I just created a Canvas and put a Panel in the top right corner. I got it to the right scale at 3: for the Hololens and loaded it up in the Holoemulator. The problem is that even though the panel is supposed to be in the corner, it is placed almost in the middle of the screen in the end.
Is there anything I can do to fix this or is there something I am missing?
If I need to provide more information then please tell me.
Could you double-check the [Render mode] of your Canvas? Is it set as World Space? In this render mode, the Canvas will behave as any other 3D object and will render in front of or behind other objects in the scene based on 3D placement in the scene. You need to adjust the position of the canvas from the perspective of the camera.
However, according to your post, it seems that you want to place UI elements on the screen rendered on top of the scene. If so, You should turn the [Render mode] to [Screen Space - Camera]. More information please see: Canvas
I am using Unity 5 and I started to make a menu scene. When I made the canvas, all of values under the Rect Transform component are locked and it says "some values driven by Canvas." The only thing I can change is the z position when using the gizmo in the editor. I can't reset the position or anything. Why is this happening?
This means that the canvas's canvas component has it's render mode set to Screen space - overlay. This forces it to be the size of the screen. Change it to World Space and it will allow you to resize it and move it around.
Changing the Render mode is not an ideal solution; neither is Overlay mode the reason why this is happening at all. World Space is just a render mode that changes the way your whole UI behaves and would mean a whole different set up and a whole lot more work just to get a child UI object to move independently.
Here is the description of what World Space is for from the Unity site:
In this render mode, the Canvas will behave as any other object in the
scene. The size of the Canvas can be set manually using its Rect
Transform, and UI elements will render in front of or behind other
objects in the scene based on 3D placement. This is useful for UIs
that are meant to be a part of the world. This is also known as a
“diegetic interface”.
The Rect Transform usually gets locked because it is a child of another Canvas Object which controls its Transforms. The way to fix this is to overwrite it by adding a “Layout Element” component to it. From there you can configure it to work the way you like and it can have transforms independent of the Parent UI Object.
For full details, see this Unity support page: https://support.unity3d.com/hc/en-us/articles/115000179163-How-to-overwrite-Width-and-Height-values-that-are-driven-by-a-Layout-Group-in-runtime-
Canvas is depend on game tab in your window panel.
Adjust panel by use of close tab or resize panel or doc game panel.
It will help you make default 800 X 600 canvas.
Effect like the mac mail app,this image is a screenshot
how can i get effect like that. I try the cocoa text system,and don't find some useful things.
and I use the nstextattachment with textatttachmentcell initImageCell,obtain some effect like that,but it is not good,it is not very nature.
please some one give directions to me.
Those objects are not glyphs, they are controls, such as a subclass of a button. Custom controls have a drawing routine, which you override to draw a blue rectangle with round corners (a bezier path is the most flexible way to do so), then you draw the text (including the caret character) centered in the blue rectangle. Finally, handle the mouse events to do what you need to do when the control is clicked, such as popping up a menu in the right location.
The new Unity 4.6 comes with a new GUI, when I change de resolution on Unity the UI Button scales perfectly but when I test on the Nexus 7 device the Button looks too small. Any idea how to solve this?
Unity's new GUI system uses "anchors" to control how gui elements (like buttons) scale in relation to their parent container.
Unity has a tutorial video on how to use the new "Rect Transform" component (where the anchors are configured) here: http://unity3d.com/learn/tutorials/modules/beginner/ui/rect-transform.
The last half of the tutorial is all about anchors. That page has links to the entire tutorial series. It's not too long. You should watch the whole thing.
Specific to your question:
The anchors are visible in your first screen shot. They are those 4 little arrows at the top left of your button.
Right now, your button is only anchored by it's top left corner.
The two right anchors need to be dragged to the right so that the right edge of your button is anchored to a space inside its parent container.
Depending on your situation, the two bottom arrows may need to be dragged down so that the bottom edge of your button is anchored as well.
The video I linked above covers all this in detail.
Lastly, for the font size to scale nicely on different resolutions, you will need to add and configure a reference resolution component to the base canvas of your UI, as Ash-Bash32 wrote earlier.
Update: The best way to add a Reference Resolution component is through the inspector window for the base canvas in your UI.
1) click the "Add Component Button" at the bottom of the inspector.
2) type the word "Reference" in the search filter field.
3) select the "Reference Resolution" component in the search results.
The Reference Resolution is now renamed as Canvas Scaler.. Along with the renaming they have added many more features for the dynamicity of the Canvas. You can go through the Unity Doc of Canvas Scaler and also take a look at this article for a practical example of how and why to use Canvas Scaler. Also make sure you use the Anchor Points to good effect to make this more robust...
To Scale UI added the ReferenceResolution Component to the Canvas you want to scale.
P.S. Theres no Documention for ReferenceResolution
If you want the button to be the same size for all screens and resolutions, you have to add the canvas scaler component to the canvas and the set the screen match mode to: match width or height, here is the link to the docs, this helps a lot if you want to aim to different sizes or resolutions:
http://docs.unity3d.com/Manual/HOWTO-UIMultiResolution.html
This becomes giant and convoluted once you start laying things out in code AND using a canvas scaler, so I wish to provide a thorough answer to save someone the hours I went through.
First, don't use anchoredPosition to position anything, unless you fully realize it is a 0.0 to 1.0 number. Use the RectTransform localPosition to do the actual laying out, and remember it's in relation to the parent anchor. (I had to lay out a grid from the center)
Second, put a canvas scaler on the parent layout object AND the inner ui pieces. One makes the layout in the right position, the other will resize your elements so they actually show up right. You can't rely on the the parent unless the children also have scalers (and Graphic Raycasters to touch them).
Third, if you have a scaler, DON'T use Screen.width and height, instead assume the screen is the same value you put for the scalers (hopefully you used the same, or know what you're doing). The screen width always returns the actual device pixels, retina devices too, but the canvas scalers DO NOT account for this. This probably gives unity the one remaining way to find actual screen dpi if your game wants it. Edit: This paragraph applies to any parent canvas connected to the code doing your laying out. Not stray canvases, you can probably mix it up. Just remember unity's guidelines on performance with canvases.
Fourth, the canvas is still a bit buggy. Even with the above working, some things don't render until you delete and recreate a canvas, if you re-open the scene or it crashes. Otherwise, the above is the general "rules" I've found.
To center a "grid of things" you can't just use half of the canvas scaler's width or height, you have to calculate the height of your grid and set the offset by half of it, otherwise it will always be slightly off. I just added this as an extra tip. This calculation works for all orientations.
I wonder if there is a way of creating/modifying a NSLevelIndicator object so it can be positioned vertically, i.e. display discrete levels from bottom up, not from left to right, so it can be also used as element of interface-building library in Xcode?
There are lots of examples of such level displays in Apple and non-Apple OSX applications, and quite a few reasons why such an object should exist, yet how to create such an object for some reason (from what I can see in developer forums) seems either not worth asking or a "best kept secret".
Is there a template code which can be modified to into an object of such properties?
I haven't even faintest idea if such an object should really be written from scratch? Mission impossible?
Thanks in advance!
Try using
[NSView setFrameRotation:90];
it's sketchy but easier than a custom view
Edit: Alternatively try
[levelView setFrameCenterRotation:90];
SetFrameRotation:90 rotated it around the bottom left axis for me so it ended up being clipped. This one rotates it around the centre so you should be able to see it. I just made a quick swift playground showcasing it: http://cl.ly/WsL8/Vertical%20LevelIndicatorView.playground.zip
Edit again: If you're still stuck, I made a sample project with a vertical level indicator in objective-c: http://cl.ly/WrdH/levelindicator.zip
Swift 5.5.1 on macOS 11.6
myLevelIndicator.frameRotation = 90
If you need to reposition the indicator to fit within the view, realize the center of rotation is the origin of the level indicator.
So, to set the rotated level indicator 20px in from the left of the view, compute that for the new frame origin of the level indicator, not forgetting to adjust for the indicators height when it is horizontal because the original height will affect the final position when rotated.
myLevelIndicator.frame.origin = CGPoint(x: self.view.frame.minX+20+myLevelIndicator.frame.height, y: myLevelIndicator.frame.minY)
Of course, this can be avoided by placing the control in the correct position to allow for rotation within IB if that works for you. Some may not be using IB and creating these controls programmatically.