Can someone see where I am going wrong in the below query? I am getting the error message that the GROUP BY column doesn't exist, but it clearly does as I see that column name in the output when I don't use the GROUP BY.
SELECT
(SELECT customer_address.post_code FROM customer_address WHERE customer_address.address_type = 0 AND customer_address.customer_no = orders.customer_no) postcode, SUM(orders.order_no) orders
FROM
orders, customer_address
WHERE
orders.delivery_date = '27-MAY-15'
GROUP BY
postcode;
The answer is: You cannot use an alias name in GROUP BY.
So:
GROUP BY (SELECT customer_address.post_code ...);
Or:
select postcode, sum(order_no)
from
(
SELECT
(SELECT customer_address.post_code FROM customer_address WHERE customer_address.address_type = 0 AND customer_address.customer_no = orders.customer_no) postcode,
orders.order_no
FROM orders, customer_address
WHERE orders.delivery_date = '27-MAY-15'
)
GROUP BY postcode;
EDIT:
However, your query seems wrong. Why do you cross-join orders and customer_address? By mistake I guess. Use explicit joins (INNER JOIN customer_address ON ...), when using joins to avoid such errors. But here I guess you'd just have to remove , customer_address.
Then why do you add order numbers? That doesn't seem to make sense.
Related
Let me explain the question.
I have two tables, which have 3 columns with same data tpyes. The 3 columns create a key/ID if you like, but the name of the columns are different in the tables.
Now I am creating queries with these 3 columns for both tables. I've managed to independently get these results
For example:
SELECT ID, FirstColumn, sum(SecondColumn)
FROM (SELECT ABC||DEF||GHI AS ID, FirstTable.*
FROM FirstTable
WHERE ThirdColumn = *1st condition*)
GROUP BY ID, FirstColumn
;
SELECT ID, SomeColumn, sum(AnotherColumn)
FROM (SELECT JKM||OPQ||RST AS ID, SecondTable.*
FROM SecondTable
WHERE AlsoSomeColumn = *2nd condition*)
GROUP BY ID, SomeColumn
;
So I make a very similar queries for two different tables. I know the results have a certain number of same rows with the ID attribute, the one I've just created in the queries. I need to check which rows in the result are not in the other query's result and vice versa.
Do I have to make temporary tables or views from the queries? Maybe join the two tables in a specific way and only run one query on them?
As a beginner I don't have any experience how to use results as an input for the next query. I'm interested what is the cleanest, most elegant way to do this.
No, you most probably don't need any "temporary" tables. WITH factoring clause would help.
Here's an example:
with
first_query as
(select id, first_column, ...
from (select ABC||DEF||GHI as id, ...)
),
second_query as
(select id, some_column, ...
from (select JKM||OPQ||RST as id, ...)
)
select id from first_query
minus
select id from second_query;
For another result you'd just switch the tables, e.g.
with ... <the same as above>
select id from second_query
minus
select id from first_query
I want to retrieve users name and there responsibility_key where there end_date is null and i want to convert it to (sysdate+1) using nvl but i am only able to retrieve the responsibility_key not the name please help.
The error in the image says "column ambiguously defined". Take a close look. Your last END_DATE could refer to either the u alias or the table from the subquery. Change it to match the rest of your subquery (FIND_USER_GROUPS_DIRECT.END_DATE)
EDIT
Your query is
select u.USER_NAME, d.responsibility_key from FND_USER u,FND_RESPONSIBILITY_VL d
where responsibility_id in(
select responsibility_id from
FND_USER_RESP_GROUPS_DIRECT WHERE END_USER_RESP_GROUPS_DIRECT.END_DATE=nvl(END_DATE,sysdate+1)) and
u.END_DATE=nvl(END_DATE,SYSDATE + 1)
;
The query isn't formatted, which makes it hard to read.
Not all columns are qualified with table name (or aliases), as mentioned in the comments.
The query currently uses an implicit join.
The query is impossible to understand without seeing the table definitions (desc [table_name]).
For points 1 and 2, a properly formatted query will look something like
select u.user_name, d.responsibility_key
from
fnd_user u,
fnd_responsibility_vl d
where
d.responsibility_id in (
select urgd.responsibility_id
from
fnd_user_resp_groups_direct urgd
where
urgd.end_date = nvl(u.end_date, sysdate+1)
) and
u.end_date = nvl(urgd.end_date, sysdate + 1)
;
This makes it easier to read and in addition to this, you can see that without table definitions I guessed (see point 4) as to which tables the end_date column belongs in your query. If I had to guess, so does Oracle. That means you have an ambiguity problem. To fix it, take a close look at the end_date column as it appears in your original query and where you do not prefix it with anything, you need to prefix it with the appropriate alias (after you have aliased all your tables).
For point 3, you can write your query more clearly with an explicit join and by using aliases for all columns. As for the explicit join I have no idea what your tables look like but one possibility is something like
select u.user_name, d.responsibility_key
from fnd_user u
join fnd_responsibility_vl d
on u.id = d.user_id
where
d.responsibility_id in (
select responsibility_id
from fnd_user_resp_groups_direct urgd
where
urgd.end_date = nvl(u.end_date, sysdate+1)
) and
u.end_date = nvl(urgd.end_date, sysdate+1)
;
If you follow these points you will get to the root of the error.
I have two tables on Oracle database, one is named departments_table and the other is locations_table. The departments.table has dep_id, dep_name, location_id, staff_id, employer_id. The locations table consists of location_id, city_id, streetname_id and postcode_id. How do I calculate the number of departments that each location has?
This is the code below is what I have tried to replicate but have been unsuccessful. The error message below that is what shows once the code has submitted.
SELECT dep_name, location_id,
COUNT(*)
FROM departments_table
WHERE location_id => 1
GROUP BY dep_name;
The results of this is an error, " not a single group function "
If you want to count how many departments are in each location, then you must group by location, not by department name, right? Let's start with that.
Then, you don't need ANYTHING about the individual departments in the output of the query, do you? You just need the location id and the count of departments.
select location_id, count(*) as cnt
from departments_table
group by location_id
;
This does most of the work. You may want to add the location name (city, address, etc.), which is/are stored elsewhere - in the locations_table. So you will need a join. And there may be locations in that table that are not, in fact, the location of any department (their id doesn't appear in the departments_table at all). If so, you would need an OUTER join. Also for those departments you probably want to show a count of 0 (rather than null) - you can "fix" that with the nvl() function. So you will end up with something like
select l.*, nvl(g.cnt, 0) as department_count
from locations_table l
left outer join
( select location_id, count(*) as cnt
from departments_table
group by location_id
) g
on l.location_id = g.location_id
;
SELECT l.location_id, l.city, COUNT(d.DEPARTMENT_ID)
FROM OEHR_LOCATIONS l, OEHR_DEPARTMENTS d WHERE l.location_id = d.location_id
GROUP BY l.location_id, l.city ORDER BY l.city;
This method works. I created aliases and made minor changes. OEHR stands for the table names so ignore that.
looking for solution on my sql query error.I'm trying to create second cascading Input Control in JaspersoftServer. The first Input Control works fine, however when I try to create a second cascade IC it returns with the error. I have 3 tables (user, client, user_client), many to many, so 1 linked table (user_client) between them.The 1st Input Control (client) - works well, end user will select the client, the client can have many users, so cascade is the key. Also, as the output, I would like to get not the user_id, but user's firstname and the lastname as one column field. And here is where i'm stuck. I'm pretty sure it is simple syntaxis error, but spent a good couple of hours to figure out what is wrong with it. Is anyone can have a look at it please and indicate where is the problem in my query ?! So far I've done:
select distinct
u.user_id,(
SELECT CONCAT(first_name, surname) AS user_name from tbl_user ),
c.client_id
FROM tbl_user u
left join tbl_user_client uc
on uc.user_id = u.user_id
left join tbl_client c
on c.client_id = uc.client_id
where c.client_id = uc.client_id
order by c.client_id
Thank you in advance.
P.S. JasperServer + Oracle 11g
You're doing an uncorrelated subquery to get the first/last name from the user table. There is no relationship between that subquery:
SELECT CONCAT(first_name, surname) AS user_name from tbl_user
... and the user ID in the main query, so the subquery will attempt to return every first/last name for all users, for every row your joins find.
You don't need to do a subquery at all as you already have the tbl_user information available:
select u.user_id,
CONCAT(u.first_name, u.surname) AS user_name
c.client_id
FROM tbl_user u
left join tbl_user_client uc
on uc.user_id = u.user_id
left join tbl_client c
on c.client_id = uc.client_id
where c.client_id = uc.client_id
order by c.client_id
If you want to put a space between the first and last name you'll either need nested concat() calls, since that function only takes two arguments:
select u.user_id,
CONCAT(u.first_name, CONCAT(' ', u.surname)) AS user_name
...
... or perhaps more readably use the concatenation operator instead:
select u.user_id,
u.first_name ||' '|| u.surname AS user_name
...
If the first control has selected a client and this query is supposed to find the users related to that client, you're joining the tables the wrong way round, aren't you? And you aren't filtering on the selected client - but no idea how that's actually implemented in Jasper. Maybe you do want the entire list and will filter it on the Jasper side.
I have a table something like this:
ID|Value
01|1
02|4
03|12
01|5
02|14
03|22
01|9
02|32
02|62
01|13
03|92
I want to know how much progress have each id made (from initial or minimal value)
so in sybase I can type:
select ID, (value-min(value)) from table group by id;
ID|Value
01|0
01|4
01|8
01|12
02|0
02|10
02|28
02|58
03|0
03|10
03|80
But monetdb does not support this (I am not sure may be cz it uses SQL'99).
Group by only gives one column or may be average of other values but not the desired result.
Are there any alternative to group by in monetdb?
You can achieve this with a self join. The idea is that you build a subselect that gives you the minimum value for each id, and then join that to the original table by id.
SELECT a.id, a.value-b.min_value
FROM "table" a INNER JOIN
(SELECT id, MIN(value) AS min_value FROM "table" GROUP BY id) AS b
ON a.id = b.id;