I constantly get this incredibly annoying prompt when I'm trying to save while my project won't build:
I don't care, I just want to save and I don't want to hit Yes every time.
How can I get rid of this annoying prompt?
Related
I left VB6 and programming all together years ago, so pardon since I'm still dusting off what I remember.
I have an old program made for a friend in VB6 that he still runs in Windows Vista. He tried to update a label in the program and in trying to do the update, he has overwritten the project file where I used to see all forms and modules together.
Is there a way I can recover or recreate the project file as it was? All project files and modules are there, but when I open the VB6 project it shows only one form, that I can't compile or execute because it shows a "source not found"
I tried to go back to an old version of the project file with file recovery software but I couldn't find it.
Other way?
Practical steps to recover:
First and foremost: Back up what you have. Do this now.
Second, and only after the first, check (again) to see if you have a previous backup. Yes, this may seem pedantic, but, really, it's worth looking. Was that the only copy? Once you do all of this, consider creating a git repo for your code.
Third, in your empty project, simply right-click in the project explorer (Ctrl + R), and click "Add >" and then "Add Files...". Then, in the file input box, scroll down to the first file, hold down shift, and keep pressing the down arrow and all the files you want. Click "Open". Repeat if need be.
Finally, you need to re-add any dependencies. One way is simply to try to run the program with full compile (Ctrl + F5 or File | Run With Full Compile in the menus). If everything starts up, consider yourself fortunate. If not, you'll have to see each one that fails and add them back. This could be tedius, but just go through them one by one. In the Project menu, both "Components" and "References" can be gone through. Do this until the program successfully starts with full compile.
At this point, consider a making a backup. ;)
I'm just starting to learn Swift using the Apple Xcode IDE. I made a little test iOS app and was trying various things when I inadvertently deleted my main code file (ViewController.swift). "No problem", I thought, as I had hit "Save" just a couple of minutes before. I exited out, then came back in, but it appeared to have autosaved.
I don't really care about this test file, but am wondering what is the proper way to save a project before trying something out (or before inadvertently pulling a bonehead move)?
What happens when I “save” in Xcode IDE?
When you hit "Save" the changes you've made are saved to disk. XCode doesn't do this automatically. If it crashes you may lose all your code written after the last time it was saved to disk. But XCode saves the changes to disk even without hitting "Save" button in some cases.
Xcode automatically saves changes to source, project, and workspace
files as you work. This feature requires no configuration, because
Xcode continuously tracks your changes and saves them in memory. Xcode
then writes these changes to disk whenever you:
Build and run your app
Commit files to a source code repository
Close the project
Quit Xcode
https://developer.apple.com/library/archive/documentation/ToolsLanguages/Conceptual/Xcode_Overview/UsingFileSaving.html
Use Git. If you don't know what it is, look into it. In the mean time, here is a tutorial or two.
To use it in Xcode, when you create a project, be sure to create a git repo:
Then be sure to commit frequently. Xcode has a built in Git GUI, so that makes it easier:
Then if you do anything that you shouldn't have you can either discard all changes (see the above screen shot, or if that can't help you, you can:
Open the 'Terminal' app
cd to the directory with the project
Run git log
Find the commit before you ruined everything
Copy the commit hash
Type q to exit the log
Run git reset --hard <THE-HASH-YOU-COPIED>
That should do it for you.
When creating a project check 'create git repository on my mac'.
Then commit changes when you're finished with one minor part and give the commit a comment so you know when looking into the history what changes you have done (quick overview).
With git you can quickly revert changes and go back to certain revisions like you can do in TimeMachine.
Further information are available at git's webpage.
I tried to map a workspace and started getting latest from it, the number of files to download were quite large, talking gigabytes.
Anyway I cancelled it halfway through as I needed to do a restart. Now when I launch VS (with or without a solution) it just hangs saying "Preparing solution" and a balloon pops up on the left saying its doing an internal operation.
I think its still trying to get latest in the background or connect to the workspace, how can I cancel this?
I would try the following (from fastest to the most thorough one).
in windows explorer/dos prompt search for suo files and delete them (they are marked as hidden). Download all files from commandline or source control explorer. Open solution
redo your steps, creating new workspace just don't cancel this time
Do note, if vs is hanged on something, make sure that no modal window is displayed, waiting for your input.
Okay ... This may be a ridiculous question. (I'm still getting used to Mac.) I really like the auto fill-in-ahead predictive typing feature of Xcode.
Can I use it to simply edit files laying around different locations on my hard drive? I do not really want to create a project or anything (unless by PROJECT I mean simply loads several files, that are not related to each other, but that I may want to jump back and forth in editing them - I do not want to create a project from files that need to be compiled or anything).
If so, what's the best way to get started? When you open XCode, it asked a lot of wizard questions to get things set up. How would I simply get started to edit 5 or so files at a time ... where I might want to switch back and forth between them - and they are not in the same directory?
All I want to do is simply make changes and save them, make more changes and save again, repeat. Kind of like holding a lot of shell scripts that communicate with each other.
Okay ... so I know this was a silly question - but Xcode is so intimidating for newbies. Sometimes, one needs a place to just get started and I haven't found that yet.
It is possible to open the Xcode text editor on a single file from the command line.
open -a Xcode.app filename.txt
If you're going to use this a lot, you might consider making an alias in your ~/.bashrc.
alias xc="open -a Xcode.app"
As of Xcode 6, you cannot open a directory this way, as it will give you an error message stating that directories must be opened as part of a project. If you provide more than one file on the command line, Xcode appears to create a temporary project containing the files you provided. You can add files and folders to the temporary project, but there doesn't seem to be a way to save the temp project for use later.
If you want to open a file in Xcode, you can also use xed.
As the man page says:
xed -- Xcode text editor invocation tool.
You can simply call xed [file] to launch Xcode editor.
Notepad++ is the way to go. Xcode was never meant to be used as a general text editor.
EDIT: Sorry, didn't know that there wasn't a Mac port for Notepad++. Use TextWrangler instead.
I am using VS 2010 and recently I moved some files around and changed paths etc.
The solution still compiles correctly and all files are able to be loaded/compiled without error however just about every time I go to compile after a change it gives me the save as dialog and asks me to save one of the projects, if I try to give it a new name or something the dialog does not exist nothing I do can make it exit apart from pressing cancel.
If I do a build straight after cancelling it works fine and I'm not presented with the save as dialog. I have verified that the project file is not read only.
Any ideas as to whats going on here.
The solution is stored in TFS 2008
You need to do 2 things
1- remove the read-only tick from the project folder
2- when a save-as window prompts at build, just overwrite the project
next time you build, the window won't pop up
You need to run VS as administrator. (right click on VS Icon- Run as administrator)
I solved the issue. When I try to save as this time it gives the error that file is being used by another process. Google Sync prevents to save so it opens save as dialog.
You should put your project under a folder not sync while working.
Are the bindings in TFS set up correctly with the new location? TFS will mark files as read only unless they get checked in. It might have been marked as such before you moved everything around, and now, isn't being checked out properly.
Also, try closing sync. files tools like google backup and sync.