I know that Dijkstra's algorithm can be used only on positive lengths of edges, and Bellman-Ford can be used when the graph also has negative ones.
Suppose we have a graph with only positive edges, though. Will Bellman-Ford give the same results as Dijkstra?
Yes, it will give the same results. It will run slower, though, as it could also have been used for graphs with negative edges (subject to the absence of negative cycles). If you look at the proof of BF's correctness, there is no assumption there that some of the edges are negative.
I want to add something to Ami Tavory's answer. Bellman-ford's algorithm can be made a little bit faster if you can detect that on any pass, there is no node value update, then return from there. If there is no node update then it proves that every node traversal is complete.
Related
I study on Greedy Algorithm. summarize some important aspects about Dijkstra's Algorithms, that will be TRUE. i suspect about (4) and (1), anyone could help me?
I) if all edges weight be negative, the Dijkstra's algorithm, works well.
II) if in graph we have a negative cycle, Dijkstra's get into a infinite loop and never end.
III) if a graph has a one edge with negative weight, but hasn't a negative cycle, the algorithm doesn't works well.
IV) if graph hasn't a negative cycle, the algorithms work well.
Dijkstra's algorithm only works on graphs with non-negative edges. This is because it assumes that the first time a node is popped off the queue we have found the shortest path to that node and this is not necessarily true as soon as you have even one negative weight.
Therefore I is false, II is false (because the negative cycle may not necessarily be reachable), III is true, IV is false (it may still have a negative edge even without a negative cycle).
If I remember it correctly Dijkstra's algorithm (at least the classic version of it) has a built in assumption that all weights in a graph are non-negative. So we have no guarantee that it will work correctly if we have negative edges in our graph.
I) In the first case we will most likely get a longest possible chain of edges with highest absolute values of weights as the shortest path, technically this will be the correct shortest path. (I assume the graph has no negative cycles)
II) False as negative cycle may be unreachable (as Peter de Rivaz correctly said)
III-IV) I assume that the 3rd paragraph is about graph having one edge with negative weight, but hasn't a negative cycle. In this case there is a possibility of algorithm stucking in a loop, because it can find a cycle with a negative-weight edge that will seem to an algorithm as a good path prolongation beacuse at some point in algorithm we decide on the next step on the weight of one edge. The negative one will always be the first choice no doubt, so even with a non-negative cycle we getting a possibility of infinite looping.
Can we use Dijkstra's algorithm to find cycles???
Negative cycles
Positive cycles
If we can what, are the changes we have to do?
1) Dijkstra's doesn't work on graphs with negative edges because you can (possibly) find a minimum distance of negative infinity.
2) Um, you normally run it on graphs with cycles (otherwise, you might as well be traversing a tree), so it can handle them just fine.
If your real question is just about finding cycles, look at Finding all cycles in graph
No We cant use Dijkstra algorithm if negative cycles exist as the algorithm works on the shortest path and for such graphs it is undefined.Once you get to a negative cycle, you can bring the cost of your "shortest path" as low as you wish by following the negative cycle multiple times.
This type of restriction is applicable to all sort of algorithms to find shortest path in a graph and this is the same reason that prohibits all negative edges in Dijkstra.
You may modify Dijkstra to find the cycles in the graph but i do not think it is the best practice.
Rather you can possibility Use:
Tarjan's strongly connected components algorithm(Time complexity -O(|E| + |V|))
or Kosaraju's algorithm (uses DFS and is a linear time alogoritham)
or you may follow this link for better idea:
https://en.wikipedia.org/wiki/Strongly_connected_component
Hope I answered your question.
I have a directed graph that has all non-negative edges except the edge(s) that leave the source (S). There are no edges from any other vertices to the source. To find the shortest distance from source (S) to a vertex (T) in the graph, can I use Dijkstra's shortest path algorithm even though the edges leaving the source is negative?
Assuming only source-adjecent edges can have negative weights and there is no path back to the source from any of the source-adjecent nodes (as mentioned in the comment), you can just add a constant C onto all edges leaving the source to make them all non-negative. Then subtract C from the final result.
On a more general note, Dijkstra can be used to solve shortest-path in any graph with negative edge weights (but no negative cycles) after applying Johnson's reweighting algorithm (which is essentially Bellman-Ford, but needs to be performed only once).
Yes, you can use Dijkstra on that type of directed graph.
If you use already finished alghoritm for Dijsktra and it cannot use negative values, it can be good practise to find the lowest negative edge and add that number to all starting edges, therefore there is no-negative number at all. You substract that number after finishing.
If you code it yourself (which is acutally pretty easy and I recommend it to you), you almost does not change anything, just start with lowest value (as usual for Dijkstra) and allow it, that lowest value can be negative. It will work in your case.
The reason you generally can't use Dijkstra's algorithm for (directed) graphs with negative links is that Dijkstra's algorithm is greedy. It assumes that once you pick a vertex with minimum distance, there is no way it can later be reached by a smaller paths.
In your particular graph, after the very first step, you traverse all possible negative edges and Dijkstra's assumption actually holds from now on. Regardless of the fact that those vertices directly connected to start now have negative values, once you identify which has the minimum distance, it can never be reached again with a smaller distance (since all edges you would traverse from this point on would have a positive distance).
If you think about the conditions that dijkstra's algorithm puts upon the edges for the algorithm to work it is only that they are never decreasing after initialisation.
Thus, it actually doesn't matter if the first step is negative as from those several points onwards the function is constantly increasing and thus the correct output will be found (provided there is no way to get back to the start square.).
I know Bellman Ford algorithm works well with negative weighted Graph, But I've developed a code of Dijkstra Algorithm that works very well. But it fails when I insert negative weighted edges. Any Solution?
I think we can't do that, as Dijkstra algorithm will not find a final way to reach at destination vertex because it may get stuck in loops, it is not made for negative weighted graphs, you should go for bellman ford algorithm
Actually, it is possible in a special case. Dijkstra algorithm will fail, if there is an edge of a negative length. However, if all edges are of negative length, then you may inverse the lengths of all edges and use the algorithm to find the longest path between two vertices of the graph (the path will represent the shortest path in the original graph).
But in a general case, as you have stated, it is not possible to use Dijkstra. If there is no cycle of negative length, than you shall use Bellman-Ford algorithm. If you cannot guarantee that there no cycle of negative length, than the problem is NP-complete and there is no known polynomial algorithm.
As you stated, Bellman Ford is the algorithm of choice for finding the shortest path in a graph with negative weights. The issue with using Dijkstra's Algorithm in this scenario is that Dijkstra's assumes that all possible subpaths from s to t in a graph must be smaller than the goal subpath, which is not necessarily true when negative edge weights are added.
If all edge weights are positive, this guarantees that adding more edges to a path makes it longer. Knowing this, Dijkstra's algorithm will discard any paths that are longer than the shortest one it has found to some vertex since there is no chance of the long path becoming shorter than the short path.
However, this assumption is not true if there are negative edge weights since we could have an extremely long path P that we discarded, but somewhere down the road, P can pass through a very negative edge and become shorter than the shortest path you currently have. Therefore, we can't guarantee that a path we've found is the shortest at any stage in Dijkstra's algorithm, which the algorithm relies on.
So I've been thinking, without resorting to another algorithm, what modifications could you make to a graph to allow Dijkstra's algorithm to work on it, and still get the correct answer at the end of the day? If it's even possible at all?
I first thought of adding a constant equal to the most negative weight to all weights, but I found that that will mess up everthing and change the original single source path.
Then, I thought of traversing through the graph, putting all weights that are less than zero into an array or somwthing of the sort and then multiplying it by -1. I think his would work (disregarding running time constraints) but maybe I'm looking at the wrong way.
EDIT:
Another idea. How about permanently setting all negative weights to infinity. that way ensuring that they are ignored?
So I just want to hear some opinions on this; what do you guys think?
Seems you looking for something similar to Johnson's algorithm:
First, a new node q is added to the graph, connected by zero-weight edges to each of the other nodes.
Second, the Bellman–Ford algorithm is used, starting from the new vertex q, to find for each vertex v the minimum weight h(v) of a path
from q to v. If this step detects a negative cycle, the algorithm is
terminated.
Next the edges of the original graph are reweighted using the values computed by the Bellman–Ford algorithm: an edge from u to v,
having length w(u,v), is given the new length w(u,v) + h(u) − h(v).
Finally, q is removed, and Dijkstra's algorithm is used to find the shortest paths from each node s to every other vertex in the
reweighted graph.
By any algorithm, you should check for negative cycles, and if there isn't negative cycle, find the shortest path.
In your case you need to run Dijkstra's algorithm one time. Also note that in Johnson's algorithm semi Bellman–Ford algorithm runs just for new added node. (not all vertices).