I'm using docker-machine to manage my cloud servers. I'm writing some bash scripts to automate some tasks. The question is: "How to check in bash script if docker machine with the specific name already exists?". I need some expression to return true if it exists and false if it doesn't.
Thanks
Just run it through grep, if a regexp is good enough for you. For example if you have a machine called foo:
$ docker-machine ls -q | grep '^foo$'
Should work and return 0. The caret matches the start of the line and the space avoids partial matches. If it doesn't match you will get a non-zero return code.
You can use something like the following:
docker-machine status some-machine 2> /dev/null || echo "Machine does not exists"
Not a scripting guru but I would do a "docker-machine help", if this command runs and the exit code ($?) is zero, the docker-machine executable is available and functioning.
If the return code is 127 (typically this returned by bash for command not found) or anything other than non-zero, you can assume that either docker-machine is not installed or is not running properly.
Related
I am writing a bash script to check on multiple servers if Tomcat 5 is installed. When running the script, even if the find command stored in the variable command returns nothing, the tomcat variable is still set to '1' in the if statement.
I know there must be something wrong with my if statement but I'm not sure what. Below is the function that runs the command on the remote server
function search() {
local login=$1
local server_fqdn=$2
local command="sudo find / -name \"tomcat-5*\""
ssh -oBatchMode=yes -o ConnectTimeout=6 $login#$server_fqdn "$command"
if [ "$?" = 0 ];
then
echo "Tomcat found"
tomcat=1
else
echo "No tomcat here!"
fi
}
How can I get the function to enter the 'else' condition if command returns nothing?
The immediate problem is: find returns 0 when not failing regardless of whether it found anything or not, you may be assuming behavior similar to grep, but that's not the case. You could capture its output res=$(find ...) and test if it is not empty (test -n), but...
But honestly, this is a rather odd way to detect present of installed SW which is quite error prone. To say the least, imagine you've left a file with notes for later: my_tomcat-5_hints.
Perhaps ask your packaging manager if being used on the host... or at least check for existence of specific file(s)/dir(s)?
You should generally not need to be superuser to tell either and if you do, it's a little odd to ssh in as one user just to sudo in the next step if it really was needed.
I am quite new to bash (barely any experience at all) and I need some help with a bash script.
I am using docker-compose to create multiple containers - for this example let's say 2 containers. The 2nd container will execute a bash command, but before that, I need to check that the 1st container is operational and fully configured. Instead of using a sleep command I want to create a bash script that will be located in the 2nd container and once executed do the following:
Execute a command and log the console output in a file
Read that file and check if a String is present. The command that I will execute in the previous step will take a few seconds (5 - 10) seconds to complete and I need to read the file after it has finished executing. I suppose i can add sleep to make sure the command is finished executing or is there a better way to do this?
If the string is not present I want to execute the same command again until I find the String I am looking for
Once I find the string I am looking for I want to exit the loop and execute a different command
I found out how to do this in Java, but if I need to do this in a bash script.
The docker-containers have alpine as an operating system, but I updated the Dockerfile to install bash.
I tried this solution, but it does not work.
#!/bin/bash
[command to be executed] > allout.txt 2>&1
until
tail -n 0 -F /path/to/file | \
while read LINE
do
if echo "$LINE" | grep -q $string
then
echo -e "$string found in the console output"
fi
done
do
echo "String is not present. Executing command again"
sleep 5
[command to be executed] > allout.txt 2>&1
done
echo -e "String is found"
In your docker-compose file make use of depends_on option.
depends_on will take care of startup and shutdown sequence of your multiple containers.
But it does not check whether a container is ready before moving to another container startup. To handle this scenario check this out.
As described in this link,
You can use tools such as wait-for-it, dockerize, or sh-compatible wait-for. These are small wrapper scripts which you can include in your application’s image to poll a given host and port until it’s accepting TCP connections.
OR
Alternatively, write your own wrapper script to perform a more application-specific health check.
In case you don't want to make use of above tools then check this out. Here they use a combination of HEALTHCHECK and service_healthy condition as shown here. For complete example check this.
Just:
while :; do
# 1. Execute a command and log the console output in a file
command > output.log
# TODO: handle errors, etc.
# 2. Read that file and check if a String is present.
if grep -q "searched_string" output.log; then
# Once I find the string I am looking for I want to exit the loop
break;
fi
# 3. If the string is not present I want to execute the same command again until I find the String I am looking for
# add ex. sleep 0.1 for the loop to delay a little bit, not to use 100% cpu
done
# ...and execute a different command
different_command
You can timeout a command with timeout.
Notes:
colon is a utility that returns a zero exit status, much like true, I prefer while : instead of while true, they mean the same.
The code presented should work in any posix shell.
Writing a script to retrieve various environment parameters back from a list of servers. My script returns no value when ran but the same command returns the desired value outside of a script.
I have tried using a couple of variations to retrieve the same data. One of the commands fails because of restrictions placed on the accounts I have access to. The second command works but only if executed in an elevated mode.
This fails with access denied (pwdx is restricted)
dzdo pgrep -f /some/path | xargs pwdx
This works outside of a script but returns no value within a script
dzdo /bin/readlink -e /proc/"$(pgrep -f /some/path)"/cwd
When using "bash -x" to execute my scriipt, I see the "readlink" code is blank.
Ideally, I would like to return the PID and path of the process running as the "pgrep" command does. I can work with the path alone as returned by the "readlink" version returns. The end goal is to gather the information from several servers for audit purposes. (version, etc.)
Am I using the wrong syntax for the "readlink" command? I'm fairly new to coding bash scripts so I appreciate any guidance to help understand when to to what if I'm using a command in a script vs command line.
If pwdx is the restricted program, you need to run that with dzdo, not pgrep.
pgrep -f /some/path | dzdo xargs pwdx
When I'm looking at bash script code, I sometimes see | and sometimes see ||, but I don't know which is preferable.
I'm trying to do something like ..
set -e;
ret=0 && { which ansible || ret=$?; }
if [[ ${ret} -ne 0 ]]; then
# install ansible here
fi
Please advise which OR operator is preferred in this scenario.
| isn't an OR operator at all. You could use ||, though:
which ansible || {
true # put your code to install ansible here
}
This is equivalent to an if:
if ! which ansible; then
true # put your code to install ansible here
fi
By the way -- consider making a habit of using type (a shell builtin) rather than which (an external command). type is both faster and has a better understanding of shell behavior: If you have an ansible command that's provided by, say, a shell function invoking the real command, which won't know that it's there, but type will correctly detect it as available.
There is a big difference between using a single pipe (pipe output from one command to be used as input for the next command) and a process control OR (double pipe).
cat /etc/issue | less
This runs the cat command on the /etc/issue file, and instead of immediately sending the output to stdout it is piped to be the input for the less command. Yes, this isn't a great example, since you could instead simply do less /etc/issue - but at least you can see how it works
touch /etc/testing || echo Did not work
For this one, the touch command is run, or attempted to run. If it has a non-zero exit status, then the double pipe OR kicks in, and tries to execute the echo command. If the touch command worked, then whatever the other choice is (our echo command in this case) is never attempted...
I've only been writing actual .sh scripts since sometime this morning, and I'm a bit stuck. I'm trying to write a script to check to see if a process is running, and to start it if it isn't. (I plan to run this script once every 10 to 15 minutes with cron.)
Here's what I have so far:
#!/bin/bash
APPCHK=$(ps aux | grep -c "/usr/bin/rsync -rvz -e ssh /home/e-smith/files/ibays/drive-i/files/Warehouse\ Pics/organized_pics imgserv#192.168.0.140:~/webapps/pavlick_container/public/images
")
RUNSYNC=$(rsync -rvz -e ssh /home/e-smith/files/ibays/drive-i/files/Warehouse\ Pics/organized_pics imgserv#192.168.0.140:~/webapps/pavlick_container/public/images)
if [ $APPCHK < '2' ];
then
$RUNSYNC
fi
exit
Here's the error that I'm getting:
$ ./image_sync.sh
rsync: mkdir "/home/i/webapps/pavlick_container/public/images" failed: No such file or directory (2)
rsync error: error in file IO (code 11) at main.c(595) [Receiver=3.0.7]
rsync: connection unexpectedly closed (9 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7]
./image_sync.sh: line 8: 2: No such file or directory
TRTWF is that
rsync -rvz -e ssh /home/e-smith/files/ibays/drive-i/files/Warehouse\ Pics/organized_pics imgserv#192.168.0.140:~/webapps/pavlick_container/public/images
runs just fine from a terminal window.
What am I doing wrong?
Your grep call is wrong on two counts. The pattern shouldn't include a newline. To look for an exact string, use grep -F 'substring' or grep -xF 'exact whole line'.
Finding if a process is running with ps | grep is highly brittle. On most unices (at least Solaris, Linux and *BSD), use pgrep: pgrep -f 'PATTERN' returns true if there's a running process whose command line matches PATTERN.
Every program returns a status code, either 0 to indicate success or a number between 1 and 255 to indicate failure. In the shell, any command is a valid boolean expression; the status code 0 is treated as true and anything else as false.
$(…) means run the command inside the parentheses and capture its output. So rsync is executed as soon as the shell hits the definition of the RUNSYNC variable. To store a block of shell code, use a function (example below, although you don't actually need a function here, you could just write the code directly).
Your test [ $APPCHK < 2 ] should be [ $APPCHK -lt 2 ]: < means input redirection. (In bash, you can also write [[ foo < bar ]], but that's string comparison, not numeric comparison.)
~/ at the beginning of the remote rsync path is optional. Also, -e ssh is the default unless your version of rsync is really old.
exit at the end of the script is useless, the script will exit anyway.
Here's a script taking the above into account:
#!/bin/bash
run_rsync () {
rsync -rvz '/home/e-smith/files/ibays/drive-i/files/Warehouse Pics/organized_pics' \
imgserv#192.168.0.140:webapps/pavlick_container/public/images
}
process_pattern='/usr/bin/rsync -rvz /home/e-smith/files/ibays/drive-i/files/Warehouse Pics/organized_pics imgserv#192\.168\.0\.140:webapps/pavlick_container/public/images'
if pgrep -xF "$process_pattern"; then
run_rsync
fi
Looks like with your rsync command that some directory along this path is wrong: ~/webapps/pavlick_container/public/images
Have you checked on the server 192.168.0.140 in imgserv's home directory to see if "pavlick_container/public" exists? That's my guess.
You have a number of problems. First you are running the commands instead of putting the commands in variables. There is also a much easier way.
RUNSYNC="rsync -rvz -e ssh /home/e-smith/files/ibays/drive-i/files/Warehouse\ Pics/organized_pics imgserv#192.168.0.140:~/webapps/pavlick_container/public/images"
if ! pgrep -f "rsync.*organized_pics"; then $RUNSYNC; fi
First of all, the way of checking if the program is running is mostly wrong. This may or may not work. You should rely on some special file you create when your script starts, that it is deleted when your script ends. This will tell you if the script is running, just checking if this file exists.
Then, try to either put a \ before the ~ or to remove the ~/ completely. If cron is run as other user, the tilde will be substituted in the client for the user directory. It works for the command line because maybe the home directory of your user in both machines match, but not in the user the cron is running. A guess at this point, but again, try to remove the ~/ and see if it works.
If your real code is missing a closing dlb-quote on the grep target, you're going to get weird results from the get-go.
Also, ps aux will not list a complete command line result like you show (at least on all the the pss I have used).
You need to make it ps auxwww. Often you will see people add | grep -v grep | (you'll see why at some point). This can be reduced to changing your static search target slightly like "/usr/bin/rsync" to "/usr/bin/[r]sync ".
Other users are also helping with their comments. Using a flag file as #DiegoSevilla mentions is marginally deprecated. use a mkdir /tmp/MyWatcher_flagDir for your flag. Directory creation is an atomic activity (where as file creations are not), and this will eliminate any errors you might encounter from having 2 copies of you monitor try to make a flag file at the same time. Only one process will succeed in making or removing a flag dir.
I hope this helps.