I have a piece of code where an external API needs to access my "www" folder for images. When I load the url, "http://localhost:8001/images/1.jpg" from the browser, it does show the image. But when I access it through the code it says, "connection refused". I have turned off the firewall as well. I also tried using the IP address instead of the "localhost".That doesn't work either. Please help.
Remember the domain name localhost has a special meaning. It always means this PC, or more accurately this network cards loopback address.
I cannot access your PC from here using the domain name localhost, as it will always be looped back to my PC.
If you want an external site to make a call to your PC then there are a number of things you will have to do.
Buy yourself an domain name, you either buy a real one or use a Dynamic DNS service like dyndns.com or or noip.com
Or you use your routers WAN ip address.
Then you must amend the httpd.conf file so that Apache allows access
from all ipaddress's
Then you must Port Forward your Router so the the NAT firewall allows
external accesses on port 80 to be forwarded to the internal PC
running Apache, and only that PC.
And possibly amend your software firewall on the Apache PC to allow access from external sources on port 80
Related
I have installed xampp server on my windows 7.
I am connecting internet using HUAWEI Dongle.
I don't have any static IP address.i Want to access my php file from internet example I have connected to internet now I have dynamic IP address like 100.101.73.240 if some one enter 100.101.73.240/home.php in his browser address bar then my home.php page should open in his browser.
What should I do for this give me step by step guide.
Local Ip can't work over the internet. It's your intranet network. If you have dynamic internet IP, then you simply configure the Dynamic DNS service. Which you can configure your Internet Router with the following settings (provided by the Dynamic DNS service providers).
dyn.com
noip.com
dynu.com
many more.
Thanks
If you want to share IP with someone from your local area network:
Go to cmd, run ipconfig command, and find your local IP, which should be like 192.168.xxx.yyy. You can easily share it with no worries it will change each time you reset your network.
If it's someone from external network:
You have no power to share your external IP if you have dynamic one, it will change too often, but still it should work for a short connection sessions. To obtain a stable address you would have to register a domain
I am creating an android client app connected to a Java server using sockets. At the moment I am working both on my pc. How can I upload my Java server to an online server so I can set my app to friends and test it?
I used OpenShift but could figure our how and if I can use it for what I want.
Also I looked at Amazon ec2, but they need credit card information, something that I would prefer not sharing for this.
Is there any way I can do this for free?
Thanks
Make sure you have a computer able to connect to the internet, and that can run 24/7. Then run your server on that computer, assume you run it on port 8080. Make sure that your host computer's IP address is it to static, otherwise DHCP will give it a different IP every time it connects to the router.
To allow your friends to connect, unless if they're on the same LAN as your host, you will need to port forward port 80 -> ComputerIP:8080 on your router. Once that's done, you will need to retrieve your router's global IPv4 address from it's configuration page and then send that to your friends.
If they're on the same LAN as your host, then you can just give them the IP address of your host computer.
If you port forwarded your server and you would like to get a host name, like stackoverflow.com, you're going to need to buy that from whoever owns the host name you would like to use. I don't know many details about how to update the DNS servers though.
If your server is local and you would like a host name, then just go onto your router configurations page and tell it to automatically assign each computer the default gateway as the primary DNS and then add a mapping in the router's DNS settings to map the host name to your computer's local IPv4 address. Note that not all routers support this feature.
Edit: You'll also need a good bandwidth to support multiple simultaneous connections.
I googled, followed all the instructions but still stuck, and unable to create a home ftp server.
My internet is from dsl modem -> vonage router -> wifi router
FileZilla server ip is 127.0.0.1 and it works fine when tried from command prompt. But I need it to be accessible from outside.
I enabled ftp on wifi router's web settings page using virtual server setting.
I am stuck at this point, I don't know what else to do further. Any help is greatly appreciated.
Also, if you are planning on accessing your server remotely, (not in your network) you will have to enable port forwarding on your router. (Use the ip address of the machine running the server and use port 21) Otherwise, you only be able to connect while in your LAN.
This pretty much summarizes your needs(via lifehacker.com)
If you're FTP'ing across your home
network (like from your upstairs PC to
your bedroom PC), you can reach the
server by using its internal network
address (most likely something like
192.168.xx.xx.) From the command line, type ipconfig to see what that address
is. If you want to log into your FTP
server over the internet, set up a
memorable URL for it and allow
connections from outside your network.
To do so, check out how to assign a
domain name to your home server and
how to access your home server behind
a router and firewall.
Original Article
How to assign a domain name to your home server
How to access a server behind a router and firewall
You need to be able to access your internal network from the internet. Consider using a service like dynDNS if your router supports it.
I developed a client/server simulation application. I deployed client and server on two different Windows XP machines. Somehow, the client is not able to send requests to the server.
I tried below options:
Pinged server machine successfully from client using ip-address.
Pinged client machine successfully from server using ip-address.
Checked netstat command line tool from both machines. Server is in LISTENING mode and client is in SYS_SENT mode. But the foreign address it is using to send is host name not the ip address.
Pinged server machine unsuccessfully using host name from client.
Pinged client machine successfully using host name from server.
I feel the problem is when the client is trying to connect to the server using the host name.
Could you please let me know how to force an application to use an ip address instead of a host name? Is there any other way to map the host name to an ip address?
Go to your client machine and type in:
nslookup server.company.com
substituting the real host name of your server for server.company.com, of course.
That should tell you which DNS server your client is using (if any) and what it thinks the problem is with the name.
To force an application to use an IP address, generally you just configure it to use the IP address instead of a host name. If the host name is hard-coded, or the application insists on using a host name in preference to an IP address (as one of your other comments seems to indicate), then you're probably out of luck there.
However, you can change the way that most machine resolve the host names, such as with /etc/resolv.conf and /etc/hosts on UNIXy systems and a local hosts file on Windows-y systems.
Try tracert to resolve the hostname. IE you have Ip address 8.8.8.8 so you would use; tracert 8.8.8.8
You could use a C function getaddrinfo() to get the numerical address - both ipv4 and ipv6.
See the example code here
This is hard to answer without more detail about the network architecture. Some things to investigate are:
Is it possible that client and/or server is behind a NAT device, a firewall, or similar?
Is any of the IP addresses involved a "local" address, like 192.168.x.y or 10.x.y.z?
What are the host names, are they "real" DNS:able names or something more local and/or Windows-specific?
How does the client look up the server? There must be a place in code or config data that holds the host name, simply try using the IP there instead if you want to avoid the lookup.
Windows XP has the Windows Firewall which can interfere with network traffic if not configured properly. You can turn off the Windows Firewall, if you have administrator privileges, by accessing the Windows Firewall applet through the Control Panel. If your application works with the Windows Firewall turned off then the problem is probably due to the settings of the firewall.
We have an application which runs on multiple PCs communicating using UDP/IP and we have been doing experiments so that the application can run on a PC with a user who does not have administrator privileges. In order for our application to communicate between multiple PCs we have had to use an administrator account to modify the Windows Firewall settings.
In our application, one PC is designated as the server and the others are clients in a server/client group and there may be several groups on the same subnet.
The first change was to use the functionality of the Exceptions tab of the Windows Firewall applet to create an exception for the port that we use for communication.
We are using host name lookup so that the clients can locate their assigned server by using the computer name which is composed of a mnemonic prefix with a dash followed by an assigned terminal number (for instance SERVER100-1). This allows several servers with their assigned clients to coexist on the same subnet. The client uses its prefix to generate the computer name for the assigned server and to then use host name lookup to discover the IP address of the assigned server.
What we found is that the host name lookup using the computer name (assigned through the Computer Name tab of the System Properties dialog) would not work unless the server PC's Windows Firewall had the File and Printer Sharing Service port enabled.
So we had to make two changes: (1) setup an exception for the port we used for communication and (2) enable File and Printer Service in the Exceptions tab to allow for the host name lookup.
** EDIT **
You may also find this Microsoft Knowledge Base article on helpful on Windows XP networking.
And see this article on NETBIOS name resolution in Windows.
I tried putting my IP from whatismyip.com in the urlbase of Bugzilla but it did not work. I wasn't able to create a new account for my team mate, and he wasnt able to access the server by typing the my ip address in his browse. And surely, when I connect again, my IP address will change. Do we have to buy a www address to host Bugzilla?
You can setup a dynamic dns service, for example via http://www.dyndns.com or http://www.no-ip.com or http://freedns.afraid.org to solve the changing ip problem without buying a domain (or buying a domain as well, but it's not a requirement).
But the real problem is that your team mate cannot access the server via the current IP address which points to either a misconfiguration of the webserver (listening only on localhost?), to a firewall in between, or most likely, that port forwarding isn't set up in your router for requests coming to your external IP address to be forwarded to the machine where you have Bugzilla set up. Additionally, you must set the urlbase to your local IP address, not to the external IP address, as blak3r says.
Check http://www.portforward.com for instructions on how to do port forwarding. But don't forget that everything mentioned has to be working:
Web server listening to outside requests: This can be tested from the same internal network via the local network IP address (what you see typing in a command line console ipconfig in Windows and ifconfig in Linux). If you can connect from a different machine on the same network via the local IP address, this is solved.
Firewalls (in router and the webserver machine) accepting connections to the web server port: For firewalls in the web server, the same test as above covers it.
Port forwarding so the router forwards the requests received on the web server port to the web server machine: This gets tested in the same way as firewalls in the router, that is, you must have your friend (or yourself from the house of your friend) try to connect to the dyn dns name set up or to the external IP as reported by whatsmyip.org.
This is all assuming your test mate is not on your same network, if he is, just using the local IP address (shown via ipconfig or ifconfig) instead of the external IP address and making sure the first step is covered (web server listening to outside requests) should be enough and nothing else is needed!
You most likely do not have your port 80 forwarded to your machine which is the reason he cannot connect when using the IP that was returned from whatismyip.com.
Assuming you're on a windows box... do
Start->Run->cmd then type
ipconfig
If your address starts with 192...* or 10...* this is your Local Area Network (LAN) IP. If this is the case, then your isp provided you with a router. Look for a setting called port forwarding or "application setting" which allows you to forward all incoming traffic on your router to a particular IP address. Go into your router's configuration settings and make sure port 80 (and maybe 443 if you're using ssl are forwarded to your local ip).
The other problem you mentioned is you do not have a static IP. This is a common problem and no you do not need to buy an address. There are several sites which can provide you a free dynamic dns host. Try no-ip.org.