Could you please let me know how to replace a particular string present in a text file or ksh file in the server with another string ?
For example :-
I have 10 files present in the path /file_sys/file in which i have to replace the word "BILL" to "BILLING" in all the 10 files.
Works for me:
I created a file 'test' with this content: "This is a simple test". Now I execute this call to the sed command:
sed -i 's/ is / is not /' test
Afterwards the file 'test' contains this content: "This is not a simple test"
If your sed utility does not support the -i flag, then there is a somewhat awkward workaround:
sed 's/ is / is not /' test > tmp_test && mv tmp_test test
This should work. Please find the testing as well.
$ cat > file1
I am a BILL boy
sed 's/[[:alnum:] [:cntrl:] [:lower:] [:space:] [:alpha:] [:digit:] [:print:] [:upper:] [:blank:] [:graph:] [:punct:] [:xdigit:]]BILL[[:alnum:] [:cntrl:] [:lower:] [:space:] [:alpha:] [:digit:] [:print:] [:upper:] [:blank:] [:graph:] [:punct:] [:xdigit:]]/BILLING/g' file1>file2
$ cat file2
I am a BILLING boy
Using sed:
sed 's/\bBILL\b/BILLING/g' file
For inplace:
sed --in-place 's/\bBILL\b/BILLING/g' file
A little for loop might assist for dealing with multiple files, and here I'm assuming -i option is not available:
for file in $(grep -wl BILL /file_sys/file/*); do
echo $file
sed -e 's/\bBILL\b/BILLING/g' $file > tmp
mv tmp $file
done
Here's what's happening:
grep -w Search for all (and only) files with the word BILL
grep -l Listing the file names (rather than content)
$(....) Execute whats inside the brackets (command substitution)
for file in Loop over each item in the list (each file with BILL in it)
echo $file Print each file name we loop over
sed command Replace the word BILL (here, specifically delimited with word boundaries "\b") with BILLING, into a tmp file
mv command Move the tmp file back to the original name (replace original)
You can easily test this without actually changing anything - e.g. just print the file name, or just print the contents (to make sure you've got what you expect before replacing the original files).
Related
How would I use sed to delete all lines in a text file that contain a specific string?
To remove the line and print the output to standard out:
sed '/pattern to match/d' ./infile
To directly modify the file – does not work with BSD sed:
sed -i '/pattern to match/d' ./infile
Same, but for BSD sed (Mac OS X and FreeBSD) – does not work with GNU sed:
sed -i '' '/pattern to match/d' ./infile
To directly modify the file (and create a backup) – works with BSD and GNU sed:
sed -i.bak '/pattern to match/d' ./infile
There are many other ways to delete lines with specific string besides sed:
AWK
awk '!/pattern/' file > temp && mv temp file
Ruby (1.9+)
ruby -i.bak -ne 'print if not /test/' file
Perl
perl -ni.bak -e "print unless /pattern/" file
Shell (bash 3.2 and later)
while read -r line
do
[[ ! $line =~ pattern ]] && echo "$line"
done <file > o
mv o file
GNU grep
grep -v "pattern" file > temp && mv temp file
And of course sed (printing the inverse is faster than actual deletion):
sed -n '/pattern/!p' file
You can use sed to replace lines in place in a file. However, it seems to be much slower than using grep for the inverse into a second file and then moving the second file over the original.
e.g.
sed -i '/pattern/d' filename
or
grep -v "pattern" filename > filename2; mv filename2 filename
The first command takes 3 times longer on my machine anyway.
The easy way to do it, with GNU sed:
sed --in-place '/some string here/d' yourfile
You may consider using ex (which is a standard Unix command-based editor):
ex +g/match/d -cwq file
where:
+ executes given Ex command (man ex), same as -c which executes wq (write and quit)
g/match/d - Ex command to delete lines with given match, see: Power of g
The above example is a POSIX-compliant method for in-place editing a file as per this post at Unix.SE and POSIX specifications for ex.
The difference with sed is that:
sed is a Stream EDitor, not a file editor.BashFAQ
Unless you enjoy unportable code, I/O overhead and some other bad side effects. So basically some parameters (such as in-place/-i) are non-standard FreeBSD extensions and may not be available on other operating systems.
I was struggling with this on Mac. Plus, I needed to do it using variable replacement.
So I used:
sed -i '' "/$pattern/d" $file
where $file is the file where deletion is needed and $pattern is the pattern to be matched for deletion.
I picked the '' from this comment.
The thing to note here is use of double quotes in "/$pattern/d". Variable won't work when we use single quotes.
You can also use this:
grep -v 'pattern' filename
Here -v will print only other than your pattern (that means invert match).
To get a inplace like result with grep you can do this:
echo "$(grep -v "pattern" filename)" >filename
I have made a small benchmark with a file which contains approximately 345 000 lines. The way with grep seems to be around 15 times faster than the sed method in this case.
I have tried both with and without the setting LC_ALL=C, it does not seem change the timings significantly. The search string (CDGA_00004.pdbqt.gz.tar) is somewhere in the middle of the file.
Here are the commands and the timings:
time sed -i "/CDGA_00004.pdbqt.gz.tar/d" /tmp/input.txt
real 0m0.711s
user 0m0.179s
sys 0m0.530s
time perl -ni -e 'print unless /CDGA_00004.pdbqt.gz.tar/' /tmp/input.txt
real 0m0.105s
user 0m0.088s
sys 0m0.016s
time (grep -v CDGA_00004.pdbqt.gz.tar /tmp/input.txt > /tmp/input.tmp; mv /tmp/input.tmp /tmp/input.txt )
real 0m0.046s
user 0m0.014s
sys 0m0.019s
Delete lines from all files that match the match
grep -rl 'text_to_search' . | xargs sed -i '/text_to_search/d'
SED:
'/James\|John/d'
-n '/James\|John/!p'
AWK:
'!/James|John/'
/James|John/ {next;} {print}
GREP:
-v 'James\|John'
perl -i -nle'/regexp/||print' file1 file2 file3
perl -i.bk -nle'/regexp/||print' file1 file2 file3
The first command edits the file(s) inplace (-i).
The second command does the same thing but keeps a copy or backup of the original file(s) by adding .bk to the file names (.bk can be changed to anything).
You can also delete a range of lines in a file.
For example to delete stored procedures in a SQL file.
sed '/CREATE PROCEDURE.*/,/END ;/d' sqllines.sql
This will remove all lines between CREATE PROCEDURE and END ;.
I have cleaned up many sql files withe this sed command.
echo -e "/thing_to_delete\ndd\033:x\n" | vim file_to_edit.txt
Just in case someone wants to do it for exact matches of strings, you can use the -w flag in grep - w for whole. That is, for example if you want to delete the lines that have number 11, but keep the lines with number 111:
-bash-4.1$ head file
1
11
111
-bash-4.1$ grep -v "11" file
1
-bash-4.1$ grep -w -v "11" file
1
111
It also works with the -f flag if you want to exclude several exact patterns at once. If "blacklist" is a file with several patterns on each line that you want to delete from "file":
grep -w -v -f blacklist file
to show the treated text in console
cat filename | sed '/text to remove/d'
to save treated text into a file
cat filename | sed '/text to remove/d' > newfile
to append treated text info an existing file
cat filename | sed '/text to remove/d' >> newfile
to treat already treated text, in this case remove more lines of what has been removed
cat filename | sed '/text to remove/d' | sed '/remove this too/d' | more
the | more will show text in chunks of one page at a time.
Curiously enough, the accepted answer does not actually answer the question directly. The question asks about using sed to replace a string, but the answer seems to presuppose knowledge of how to convert an arbitrary string into a regex.
Many programming language libraries have a function to perform such a transformation, e.g.
python: re.escape(STRING)
ruby: Regexp.escape(STRING)
java: Pattern.quote(STRING)
But how to do it on the command line?
Since this is a sed-oriented question, one approach would be to use sed itself:
sed 's/\([\[/({.*+^$?]\)/\\\1/g'
So given an arbitrary string $STRING we could write something like:
re=$(sed 's/\([\[({.*+^$?]\)/\\\1/g' <<< "$STRING")
sed "/$re/d" FILE
or as a one-liner:
sed "/$(sed 's/\([\[/({.*+^$?]\)/\\\1/g' <<< "$STRING")/d"
with variations as described elsewhere on this page.
cat filename | grep -v "pattern" > filename.1
mv filename.1 filename
You can use good old ed to edit a file in a similar fashion to the answer that uses ex. The big difference in this case is that ed takes its commands via standard input, not as command line arguments like ex can. When using it in a script, the usual way to accomodate this is to use printf to pipe commands to it:
printf "%s\n" "g/pattern/d" w | ed -s filename
or with a heredoc:
ed -s filename <<EOF
g/pattern/d
w
EOF
This solution is for doing the same operation on multiple file.
for file in *.txt; do grep -v "Matching Text" $file > temp_file.txt; mv temp_file.txt $file; done
I found most of the answers not useful for me, If you use vim I found this very easy and straightforward:
:g/<pattern>/d
Source
So I have a file containing millions of lines.
and now within the file I have occurrences such as
=Continent
=Country
=State
=City
=Street
Now I have an excel file in which I have the text that should replace these occurrences - as an example :
=Continent should be replaced with =Asia
Similarly for other text
Now I was thinking of writing a java program to read my input file , read the mapping file and for each occurrence search and replace.
I am being lazy here - was wondering if I could do the same using editors like VIM ?
would that be possible ?
NOTE - I dont want to do a single text replace - I have multiple text that need to be found and replaced and I dont want to do the search and replace manually for each.
EDIT1:
Contents of my file that I want to replace: "1.txt"
continent=cont_text
country=country_text
The file that contains the values I want to replace with : "to_replace.txt"
=cont_text~Asia
=country_text~India
and finally using 'sed' here is my .sh file - but I am doing something wrong - it does not replace the contents of "1.txt"
while IFS="~" read foo bar;
do
echo $foo
echo $bar
for filename in 1.txt; do
sed -i.backup 's/$foo/$bar/g;' $filename
done
done < to_replace.txt
You can't put $foo and $bar in single quotes because the shell won't expand them. You don't need the for $filename in 1.txt loop because sed will loop through the lines of 1.txt. And you can't use -i.backup inside the loop because it will change the backup file each time and not preserve the original. So your script should be:
#!/bin/bash
cp 1.txt 1.txt.backup
while IFS="~" read foo bar;
do
echo $foo
echo $bar
sed -i "s/$foo/=$bar/g;" 1.txt
done < to_replace.txt
Output:
$ cat 1.txt
continent=Asia
country=India
sed is for simple substitutions on individual lines and shell is an environment from which to call tools not a tool to manipulate text so any time you write a shell loop to manipulate text you are doing it wrong.
Just use the tool that the same guys who invented sed and shell also invented to do general text processing jobs like this, awk:
$ awk -F'[=~]' -v OFS="=" 'NR==FNR{map[$2]=$3;next} {$2=map[$2]} 1' to_replace.txt 1.txt
continent=Asia
country=India
This sed command will do it without any loop:
sed -n 's#\(^=[^~]*\)~\(.*\)#s/\1/=\2/g#p' to_replace.txt |sed -i -f- 1.txt
Or sed with extended regex:
sed -nr 's#(^=[^~]*)~(.*)#s/\1/=\2/g#p' to_replace.txt | sed -i -f- 1.txt
Explanation:
The sed command:
sed -n 's#\(^=[^~]*\)~\(.*\)#s/\1/=\2/g#p' to_replace.txt
generates an output:
s/=cont_text/=Asia/g
s/=country_text/=India/g
which is then used as a sed script for the next sed after the pipe.
$ cat 1.txt
continent=Asia
country=India
I have a file containing a list of replacement pairs (about 100 of them) which are used by sed to replace strings in files.
The pairs go like:
old|new
tobereplaced|replacement
(stuffiwant).*(too)|\1\2
and my current code is:
cat replacement_list | while read i
do
old=$(echo "$i" | awk -F'|' '{print $1}') #due to the need for extended regex
new=$(echo "$i" | awk -F'|' '{print $2}')
sed -r "s/`echo "$old"`/`echo "$new"`/g" -i file
done
I cannot help but think that there is a more optimal way of performing the replacements. I tried turning the loop around to run through lines of the file first but that turned out to be much more expensive.
Are there any other ways of speeding up this script?
EDIT
Thanks for all the quick responses. Let me try out the various suggestions before choosing an answer.
One thing to clear up: I also need subexpressions/groups functionality. For example, one replacement I might need is:
([0-9])U|\10 #the extra brackets and escapes were required for my original code
Some details on the improvements (to be updated):
Method: processing time
Original script: 0.85s
cut instead of awk: 0.71s
anubhava's method: 0.18s
chthonicdaemon's method: 0.01s
You can use sed to produce correctly -formatted sed input:
sed -e 's/^/s|/; s/$/|g/' replacement_list | sed -r -f - file
I recently benchmarked various string replacement methods, among them a custom program, sed -e, perl -lnpe and an probably not that widely known MySQL command line utility, replace. replace being optimized for string replacements was almost an order of magnitude faster than sed. The results looked something like this (slowest first):
custom program > sed > LANG=C sed > perl > LANG=C perl > replace
If you want performance, use replace. To have it available on your system, you'll need to install some MySQL distribution, though.
From replace.c:
Replace strings in textfile
This program replaces strings in files or from stdin to stdout. It accepts a list of from-string/to-string pairs and replaces each occurrence of a from-string with the corresponding to-string. The first occurrence of a found string is matched. If there is more than one possibility for the string to replace, longer matches are preferred before shorter matches.
...
The programs make a DFA-state-machine of the strings and the speed isn't dependent on the count of replace-strings (only of the number of replaces). A line is assumed ending with \n or \0. There are no limit exept memory on length of strings.
More on sed. You can utilize multiple cores with sed, by splitting your replacements into #cpus groups and then pipe them through sed commands, something like this:
$ sed -e 's/A/B/g; ...' file.txt | \
sed -e 's/B/C/g; ...' | \
sed -e 's/C/D/g; ...' | \
sed -e 's/D/E/g; ...' > out
Also, if you use sed or perl and your system has an UTF-8 setup, then it also boosts performance to place a LANG=C in front of the commands:
$ LANG=C sed ...
You can cut down unnecessary awk invocations and use BASH to break name-value pairs:
while IFS='|' read -r old new; do
# echo "$old :: $new"
sed -i "s~$old~$new~g" file
done < replacement_list
IFS='|' will give enable read to populate name-value in 2 different shell variables old and new.
This is assuming ~ is not present in your name-value pairs. If that is not the case then feel free to use an alternate sed delimiter.
Here is what I would try:
store your sed search-replace pair in a Bash array like ;
build your sed command based on this array using parameter expansion
run command.
patterns=(
old new
tobereplaced replacement
)
pattern_count=${#patterns[*]} # number of pattern
sedArgs=() # will hold the list of sed arguments
for (( i=0 ; i<$pattern_count ; i=i+2 )); do # don't need to loop on the replacement…
search=${patterns[i]};
replace=${patterns[i+1]}; # … here we got the replacement part
sedArgs+=" -e s/$search/$replace/g"
done
sed ${sedArgs[#]} file
This result in this command:
sed -e s/old/new/g -e s/tobereplaced/replacement/g file
You can try this.
pattern=''
cat replacement_list | while read i
do
old=$(echo "$i" | awk -F'|' '{print $1}') #due to the need for extended regex
new=$(echo "$i" | awk -F'|' '{print $2}')
pattern=${pattern}"s/${old}/${new}/g;"
done
sed -r ${pattern} -i file
This will run the sed command only once on the file with all the replacements. You may also want to replace awk with cut. cut may be more optimized then awk, though I am not sure about that.
old=`echo $i | cut -d"|" -f1`
new=`echo $i | cut -d"|" -f2`
You might want to do the whole thing in awk:
awk -F\| 'NR==FNR{old[++n]=$1;new[n]=$2;next}{for(i=1;i<=n;++i)gsub(old[i],new[i])}1' replacement_list file
Build up a list of old and new words from the first file. The next ensures that the rest of the script isn't run on the first file. For the second file, loop through the list of replacements and perform them each one by one. The 1 at the end means that the line is printed.
{ cat replacement_list;echo "-End-"; cat YourFile; } | sed -n '1,/-End-/ s/$/³/;1h;1!H;$ {g
t again
:again
/^-End-³\n/ {s///;b done
}
s/^\([^|]*\)|\([^³]*\)³\(\n\)\(.*\)\1/\1|\2³\3\4\2/
t again
s/^[^³]*³\n//
t again
:done
p
}'
More for fun to code via sed. Try maybe for a time perfomance because this start only 1 sed that is recursif.
for posix sed (so --posix with GNU sed)
explaination
copy replacement list in front of file content with a delimiter (for line with ³ and for list with -End-) for an easier sed handling (hard to use \n in class character in posix sed.
place all line in buffer (add the delimiter of line for replacement list and -End- before)
if this is -End-³, remove the line and go to final print
replace each first pattern (group 1) found in text by second patttern (group 2)
if found, restart (t again)
remove first line
restart process (t again). T is needed because b does not reset the test and next t is always true.
Thanks to #miku above;
I have a 100MB file with a list of 80k replacement-strings.
I tried various combinations of sed's sequentially or parallel, but didn't see throughputs getting shorter than about a 20-hour runtime.
Instead I put my list into a sequence of scripts like "cat in | replace aold anew bold bnew cold cnew ... > out ; rm in ; mv out in".
I randomly picked 1000 replacements per file, so it all went like this:
# first, split my replace-list into manageable chunks (89 files in this case)
split -a 4 -l 1000 80kReplacePairs rep_
# next, make a 'replace' script out of each chunk
for F in rep_* ; do \
echo "create and make executable a scriptfile" ; \
echo '#!/bin/sh' > run_$F.sh ; chmod +x run_$F.sh ; \
echo "for each chunk-file line, strip line-ends," ; \
echo "then with sed, turn '{long list}' into 'cat in | {long list}' > out" ; \
cat $F | tr '\n' ' ' | sed 's/^/cat in | replace /;s/$/ > out/' >> run_$F.sh ;
echo "and append commands to switch in and out files, for next script" ; \
echo -e " && \\\\ \nrm in && mv out in\n" >> run_$F.sh ; \
done
# put all the replace-scripts in sequence into a main script
ls ./run_rep_aa* > allrun.sh
# make it executable
chmod +x allrun.sh
# run it
nohup ./allrun.sh &
.. which ran in under 5 mins, a lot less than 20 hours !
Looking back, I could have used more pairs per script, by finding how many lines would make up the limit.
xargs --show-limits </dev/null 2>&1 | grep --color=always "actually use:"
Maximum length of command we could actually use: 2090490
So just under 2MB; how many pairs would that be for my script ?
head -c 2090490 80kReplacePairs | wc -l
76923
So it seems I could have used 2 * 40000-line chunks
to expand on chthonicdaemon's solution
live demo
#! /bin/sh
# build regex from text file
REGEX_FILE=some-patch.regex.diff
# test
# set these with "export key=val"
SOME_VAR_NAME=hello
ANOTHER_VAR_NAME=world
escape_b() {
echo "$1" | sed 's,/,\\/,g'
}
regex="$(
(echo; cat "$REGEX_FILE"; echo) \
| perl -p -0 -e '
s/\n#[^\n]*/\n/g;
s/\(\(SOME_VAR_NAME\)\)/'"$(escape_b "$SOME_VAR_NAME")"'/g;
s/\(\(ANOTHER_VAR_NAME\)\)/'"$(escape_b "$ANOTHER_VAR_NAME")"'/g;
s/([^\n])\//\1\\\//g;
s/\n-([^\n]+)\n\+([^\n]*)(?:\n\/([^\n]+))?\n/s\/\1\/\2\/\3;\n/g;
'
)"
echo "regex:"; echo "$regex" # debug
exec perl -00 -p -i -e "$regex" "$#"
prefixing lines with -+/ allows empty "plus" values, and protects leading whitespace from buggy text editors
sample input: some-patch.regex.diff
# file format is similar to diff/patch
# this is a comment
# replace all "a/a" with "b/b"
-a/a
+b/b
/g
-a1|a2
+b1|b2
/sg
# this is another comment
-(a1).*(a2)
+b\1b\2b
-a\na\na
+b
-a1-((SOME_VAR_NAME))-a2
+b1-((ANOTHER_VAR_NAME))-b2
sample output
s/a\/a/b\/b/g;
s/a1|a2/b1|b2/;;
s/(a1).*(a2)/b\1b\2b/;
s/a\na\na/b/;
s/a1-hello-a2/b1-world-b2/;
this regex format is compatible with sed and perl
since miku mentioned mysql replace:
replacing fixed strings with regex is non-trivial,
since you must escape all regex chars,
but you also must handle backslash escapes ...
naive escaper:
echo '\(\n' | perl -p -e 's/([.+*?()\[\]])/\\\1/g'
\\(\n
How can I join multiple lines into one line, with a separator where the new-line characters were, and avoiding a trailing separator and, optionally, ignoring empty lines?
Example. Consider a text file, foo.txt, with three lines:
foo
bar
baz
The desired output is:
foo,bar,baz
The command I'm using now:
tr '\n' ',' <foo.txt |sed 's/,$//g'
Ideally it would be something like this:
cat foo.txt |join ,
What's:
the most portable, concise, readable way.
the most concise way using non-standard unix tools.
Of course I could write something, or just use an alias. But I'm interested to know the options.
Perhaps a little surprisingly, paste is a good way to do this:
paste -s -d","
This won't deal with the empty lines you mentioned. For that, pipe your text through grep, first:
grep -v '^$' | paste -s -d"," -
This sed one-line should work -
sed -e :a -e 'N;s/\n/,/;ba' file
Test:
[jaypal:~/Temp] cat file
foo
bar
baz
[jaypal:~/Temp] sed -e :a -e 'N;s/\n/,/;ba' file
foo,bar,baz
To handle empty lines, you can remove the empty lines and pipe it to the above one-liner.
sed -e '/^$/d' file | sed -e :a -e 'N;s/\n/,/;ba'
How about to use xargs?
for your case
$ cat foo.txt | sed 's/$/, /' | xargs
Be careful about the limit length of input of xargs command. (This means very long input file cannot be handled by this.)
Perl:
cat data.txt | perl -pe 'if(!eof){chomp;$_.=","}'
or yet shorter and faster, surprisingly:
cat data.txt | perl -pe 'if(!eof){s/\n/,/}'
or, if you want:
cat data.txt | perl -pe 's/\n/,/ unless eof'
Just for fun, here's an all-builtins solution
IFS=$'\n' read -r -d '' -a data < foo.txt ; ( IFS=, ; echo "${data[*]}" ; )
You can use printf instead of echo if the trailing newline is a problem.
This works by setting IFS, the delimiters that read will split on, to just newline and not other whitespace, then telling read to not stop reading until it reaches a nul, instead of the newline it usually uses, and to add each item read into the array (-a) data. Then, in a subshell so as not to clobber the IFS of the interactive shell, we set IFS to , and expand the array with *, which delimits each item in the array with the first character in IFS
I needed to accomplish something similar, printing a comma-separated list of fields from a file, and was happy with piping STDOUT to xargs and ruby, like so:
cat data.txt | cut -f 16 -d ' ' | grep -o "\d\+" | xargs ruby -e "puts ARGV.join(', ')"
I had a log file where some data was broken into multiple lines. When this occurred, the last character of the first line was the semi-colon (;). I joined these lines by using the following commands:
for LINE in 'cat $FILE | tr -s " " "|"'
do
if [ $(echo $LINE | egrep ";$") ]
then
echo "$LINE\c" | tr -s "|" " " >> $MYFILE
else
echo "$LINE" | tr -s "|" " " >> $MYFILE
fi
done
The result is a file where lines that were split in the log file were one line in my new file.
Simple way to join the lines with space in-place using ex (also ignoring blank lines), use:
ex +%j -cwq foo.txt
If you want to print the results to the standard output, try:
ex +%j +%p -scq! foo.txt
To join lines without spaces, use +%j! instead of +%j.
To use different delimiter, it's a bit more tricky:
ex +"g/^$/d" +"%s/\n/_/e" +%p -scq! foo.txt
where g/^$/d (or v/\S/d) removes blank lines and s/\n/_/ is substitution which basically works the same as using sed, but for all lines (%). When parsing is done, print the buffer (%p). And finally -cq! executing vi q! command, which basically quits without saving (-s is to silence the output).
Please note that ex is equivalent to vi -e.
This method is quite portable as most of the Linux/Unix are shipped with ex/vi by default. And it's more compatible than using sed where in-place parameter (-i) is not standard extension and utility it-self is more stream oriented, therefore it's not so portable.
POSIX shell:
( set -- $(cat foo.txt) ; IFS=+ ; printf '%s\n' "$*" )
My answer is:
awk '{printf "%s", ","$0}' foo.txt
printf is enough. We don't need -F"\n" to change field separator.
I have a large number of words in a text file to replace.
This script is working up until the sed command where I get:
sed: 1: "*.js": invalid command code *
PS... Bash isn't one of my strong points - this doesn't need to be pretty or efficient
cd '/Users/xxxxxx/Sites/xxxxxx'
echo `pwd`;
for line in `cat myFile.txt`
do
export IFS=":"
i=0
list=()
for word in $line; do
list[$i]=$word
i=$[i+1]
done
echo ${list[0]}
echo ${list[1]}
sed -i "s/{$list[0]}/{$list[1]}/g" *.js
done
You're running BSD sed (under OS X), therefore the -i flag requires an argument specifying what you want the suffix to be.
Also, no files match the glob *.js.
This looks like a simple typo:
sed -i "s/{$list[0]}/{$list[1]}/g" *.js
Should be:
sed -i "s/${list[0]}/${list[1]}/g" *.js
(just like the echo lines above)
So myFile.txt contains a list of from:to substitutions, and you are looping over each of those. Why don't you create a sed script from this file instead?
cd '/Users/xxxxxx/Sites/xxxxxx'
sed -e 's/^/s:/' -e 's/$/:/' myFile.txt |
# Output from first sed script is a sed script!
# It contains substitutions like this:
# s:from:to:
# s:other:substitute:
sed -f - -i~ *.js
Your sed might not like the -f - which means sed should read its script from standard input. If that is the case, perhaps you can create a temporary script like this instead;
sed -e 's/^/s:/' -e 's/$/:/' myFile.txt >script.sed
sed -f script.sed -i~ *.js
Another approach, if you don't feel very confident with sed and think you are going to forget in a week what the meaning of that voodoo symbols is, could be using IFS in a more efficient way:
IFS=":"
cat myFile.txt | while read PATTERN REPLACEMENT # You feed the while loop with stdout lines and read fields separated by ":"
do
sed -i "s/${PATTERN}/${REPLACEMENT}/g"
done
The only pitfall I can see (it may be more) is that if whether PATTERN or REPLACEMENT contain a slash (/) they are going to destroy your sed expression.
You can change the sed separator with a non-printable character and you should be safe.
Anyway, if you know whats on your myFile.txt you can just use any.