I am troubleshooting a problem with a device keeping a Windows 10 PC awake using the powercfg -requests command. I have a BAT file containing the following so it can be run quickly via shortcut with run as admin properties:
cmd /k powercfg -requests
This works, but in addition to keeping the window open, I'd like to be able to keep sending powercfg -requests by hitting arrow up/enter when needed, as would normally happen if I opened a command prompt and typed it manually.
I've searched quite a bit here, and aside from making it repeat automatically,
I haven't found anything other than sending arrow keystrokes in a BAT file.
I did see something which implied it might be possible to print the command so it's entered at the prompt
after the command has executed, which would be fine too, but haven't had much luck.
Is this possible?
Sorry, there is not a simple way...
This works:
#if (#CodeSection == #Batch) #then
#echo off
start "" /B cmd /K
timeout /T 1
CScript //nologo //E:JScript "%~F0" "powercfg -requests{ENTER}"
goto :EOF
#end
WScript.CreateObject("WScript.Shell").SendKeys(WScript.Arguments(0));
For a further description on the method used, see this answer
Use PowerShell instead. You can right click on Desktop > New Shortcut and paste this then save
powershell -NoExit -Command "Add-Content -Path (Get-PSReadlineOption).HistorySavePath 'powercfg -requests'; Invoke-Expression 'powercfg -requests'"
It's better to create a new shortcut because you can set it to always run as admin although it's still possible to put it in a *.bat/*.ps1 file
You can also shorten it like this
powershell -NoE -C "$c = 'powercfg -requests'; ac (Get-PSReadlineOption).HistorySavePath $c; iex $c"
PowerShell is far more flexible and powerful than batch. It also has a persistent history so it's far more convenient to use PowerShell. You may not even need this and just press Ctrl+R to search through history for the powercfg command just like in bash/zsh
I am trying to run a .cmd file on a remote server with PowerShell.
In my .ps1 script I have tried this:
C:\MyDirectory\MyCommand.cmd
It results in this error:
C:\MyDirectory\MyCommand.cmd is not recognized as the name of a cmdlet,
function, script file, or operable program.
And this
Invoke-Command C:\MyDirectory\MyCommand.cmd
results in this error:
Invoke-Command : Parameter set cannot be resolved using the specified named
parameters.
I do not need to pass any parameters to the PowerShell script. What is the correct syntax that I am looking for?
Invoke-Item will look up the default handler for the file type and tell it to run it.
It's basically the same as double-clicking the file in Explorer, or using start.exe.
Go to C:\MyDirectory and try this:
.\MyCommand.cmd
Try invoking cmd /c C:\MyDirectory\MyCommand.cmd – that should work.
To run or convert batch files to PowerShell (particularly if you wish to sign all your scheduled task scripts with a certificate) I simply create a PowerShell script, for example, deletefolders.ps1.
Input the following into the script:
cmd.exe /c "rd /s /q C:\#TEMP\test1"
cmd.exe /c "rd /s /q C:\#TEMP\test2"
cmd.exe /c "rd /s /q C:\#TEMP\test3"
*Each command needs to be put on a new line, calling cmd.exe again.
This script can now be signed and run from PowerShell outputting the commands to command prompt / cmd directly.
It is a much safer way than running batch files!
First you can reach till that folder:
cd 'C:\MyDirectory'
and then use:
./MyCommand.cmd
How do I open a elevated command prompt using command lines on a normal cmd?
For example, I use runas /username:admin cmd but the cmd that was opened does not seem to be elevated! Any solutions?
I ran into the same problem and the only way I was able to open the CMD as administrator from CMD was doing the following:
Open CMD
Write powershell -Command "Start-Process cmd -Verb RunAs" and press Enter
A pop-up window will appear asking to open a CMD as administrator
I don't have enough reputation to add a comment to the top answer, but with the power of aliases you can get away with just typing the following:
powershell "start cmd -v runAs"
This is just a shorter version of user3018703 excellent
solution:
powershell -Command "Start-Process cmd -Verb RunAs"
Simple way I did after trying other answers here
Method 1: WITHOUT a 3rd party program (I used this)
Create a file called sudo.bat (you can replace sudo with any name you want) with following content
powershell.exe -Command "Start-Process cmd \"/k cd /d %cd%\" -Verb RunAs"
Move sudo.bat to a folder in your PATH; if you don't know what that means, just move these files to c:\windows\
Now sudo will work in Run dialog (win+r) or in explorer address bar (this is the best part :))
Method 2: WITH a 3rd party program
Download NirCmd and unzip it.
Create a file called sudo.bat (you can replace sudo with any name you want) with following content
nircmdc elevate cmd /k "cd /d %cd%"
Move nircmdc.exe and sudo.bat to a folder in your PATH; if you don't know what that means, just move these files to c:\windows\
Now sudo will work in Run dialog (win+r) or in explorer address bar (this is the best part :))
According to documentation, the Windows security model...
does not grant administrative privileges at all
times. Even administrators run under standard privileges when they
perform non-administrative tasks that do not require elevated
privileges.
You have the Create this task with administrative privileges option in the Create new task dialog (Task Manager > File > Run new task), but there is no built-in way to effectively elevate privileges using the command line.
However, there are some third party tools (internally relying on Windows APIs) you can use to elevate privileges from the command line:
NirCmd:
Download it and unzip it.
nircmdc elevate cmd
windosu:
Install it: npm install -g windosu (requires node.js installed)
sudo cmd
I use nirsoft programs (eg nircmdc) and sysinternals (eg psexec) all the time. They are very helpful.
But if you don't want to, or can't, dl a 3rd party program, here's another way, pure Windows.
Short answer: you can while elevated create a scheduled task with elevated privileges which you can then invoke later while not elevated.
Middle-length answer: while elevated create task with (but I prefer task scheduler GUI):
schtasks /create /sc once /tn cmd_elev /tr cmd /rl highest /st 00:00
Then later, no elevation needed, invoke with
schtasks /run /tn cmd_elev
Long answer: There's a lot of fidgety details; see my blog entry "Start program WITHOUT UAC, useful at system start and in batch files (use task scheduler)"
The following as a batch file will open an elevated command prompt with the path set to the same directory as the one from where the batch file was invoked
set OLDDIR=%CD%
powershell -Command "Start-Process cmd -ArgumentList '/K cd %OLDDIR%' -Verb RunAs "
While both solutions provided by Dheeraj Bhaskar work, unfortunately they will result in the UAC dialog showing up on top (z-order-wise) but not getting focused (the focused window is the caller cmd/powershell window), thus I either need to grab the mouse and click "yes", or to select the UAC window using Alt+Shift+Tab. (Tested on Win10x64 v1607 build14393.447; UAC = "[...] do not dim [...]".)
The following solution is a bit awkward as it uses two files, but it preserves the correct focus order, so no extra mouse / keyboard actions are required (besides confirming the UAC dialog: Alt+Y).
cmdadm.lnk (shortcut properties / Advanced... / Run as administrator = ON)
%SystemRoot%\System32\cmd.exe /k "cd /d"
su.bat
#start cmdadm.lnk %cd%
Run with su.
Make the batch file save the credentials of the actual administrator account by using the /savecred switch. This will prompt for credentials the first time and then store the encrypted password in credential manager. Then for all subsequent times the batch runs it will run as the full admin but not prompt for credentials because they are stored encrypted in credential manager and the end user is unable to get the password. The following should open an elevated CMD with full administrator privileges and will only prompt for password the first time:
START c:\Windows\System32\runas.exe /user:Administrator /savecred cmd.exe
My favorite way of doing this is using PsExec.exe from SysInternals, available at http://technet.microsoft.com/en-us/sysinternals/bb897553
.\psexec.exe -accepteula -h -u "$username" -p "$password" cmd.exe
The "-h" switch is the one doing the magic:
-h If the target system is Vista or higher, has the process run with the account's elevated token, if available.
I've been using Elevate for awhile now.
It's description - This utility executes a command with UAC privilege elevation. This is useful for working inside command prompts or with batch files.
I copy the bin.x86-64\elevate.exe from the .zip into C:\Program Files\elevate and add that path to my PATH.
Then GitBash I can run something like elevate sc stop W3SVC to turn off the IIS service.
Running the command gives me the UAC dialog, properly focused with keyboard control and upon accepting the dialog I return to my shell.
Dheeraj Bhaskar's method with Powershell has a missing space in it, alt least for the Windows 10 incarnation of Powershell.
The command line inside his sudo.bat should be
powershell.exe -Command "Start-Process cmd \"/k cd /d %cd% \" -Verb RunAs"
Note the extra space after %cd%
;)Frode
Similar to some of the other solutions above, I created an elevate batch file which runs an elevated PowerShell window, bypassing the execution policy to enable running everything from simple commands to batch files to complex PowerShell scripts. I recommend sticking it in your C:\Windows\System32 folder for ease of use.
The original elevate command executes its task, captures the output, closes the spawned PowerShell window and then returns, writing out the captured output to the original window.
I created two variants, elevatep and elevatex, which respectively pause and keep the PowerShell window open for more work.
https://github.com/jt-github/elevate
And in case my link ever dies, here's the code for the original elevate batch file:
#Echo Off
REM Executes a command in an elevated PowerShell window and captures/displays output
REM Note that any file paths must be fully qualified!
REM Example: elevate myAdminCommand -myArg1 -myArg2 someValue
if "%1"=="" (
REM If no command is passed, simply open an elevated PowerShell window.
PowerShell -Command "& {Start-Process PowerShell.exe -Wait -Verb RunAs}"
) ELSE (
REM Copy command+arguments (passed as a parameter) into a ps1 file
REM Start PowerShell with Elevated access (prompting UAC confirmation)
REM and run the ps1 file
REM then close elevated window when finished
REM Output captured results
IF EXIST %temp%\trans.txt del %temp%\trans.txt
Echo %* ^> %temp%\trans.txt *^>^&1 > %temp%\tmp.ps1
Echo $error[0] ^| Add-Content %temp%\trans.txt -Encoding Default >> %temp%\tmp.ps1
PowerShell -Command "& {Start-Process PowerShell.exe -Wait -ArgumentList '-ExecutionPolicy Bypass -File ""%temp%\tmp.ps1""' -Verb RunAs}"
Type %temp%\trans.txt
)
..
#ECHO OFF
SETLOCAL EnableDelayedExpansion EnableExtensions
NET SESSION >nul 2>&1
IF %ERRORLEVEL% NEQ 0 GOTO ELEVATE
GOTO :EOF
:ELEVATE
SET this="%CD%"
SET this=!this:\=\\!
MSHTA "javascript: var shell = new ActiveXObject('shell.application'); shell.ShellExecute('CMD', '/K CD /D \"!this!\"', '', 'runas', 1);close();"
EXIT 1
save this script as "god.cmd" in your system32 or whatever your path is directing to....
if u open a cmd in e:\mypictures\ and type god
it will ask you for credentials and put you back to that same place as the administrator...
There seem to be a lot of really creative solutions on this, but I found Stiegler & Gui made the most sense to me. I was looking into how I could do this, but using it in conjunction with my domain admin credential, instead of relying on the local permissions of the "current user".
This is what I came up with:
runas /noprofile /user:DomainName\UserName "powershell start cmd -v runas"
It may seem redundant, but it does prompt for my admin password, and does come up as an elevated command prompt.
Here is a way to integrate with explorer.
It will popup a extra menu item when you right-click in any folder within Windows Explorer:
Here are the steps:
Create this key: \HKEY_CLASSES_ROOT\Folder\shell\dosherewithadmin
Change its Default value to whatever you want to appear as the menu item text.
E.g. "DOS Shell as Admin"
Create another key: \HKEY_CLASSES_ROOT\Folder\shell\dosherewithadmin\command
and change its default value to this:
powershell.exe -Command "Start-Process -Verb RunAs 'cmd.exe' -Args '/k pushd "%1"'"
Done. Now right-click in any folder and you will see your item there within the other items.
*we use pushd instead of cd to allow it to work in any drive. :-)
For fans of Cygwin:
cygstart -a runas cmd
When a CMD script needs Administrator rights and you know it, add this line to the very top of the script (right below #ECHO OFF):
NET FILE > NUL 2>&1 || POWERSHELL -ex Unrestricted -Command "Start-Process -Verb RunAs -FilePath '%ComSpec%' -ArgumentList '/c \"%~fnx0\" %*'" && EXIT /b
The NET FILE checks for existing Administrator rights. If there are none, PowerShell restarts the current script (with its arguments) in an elevated shell, and the non-elevated script closes.
To allow running scripts -ex Unrestricted is necessary.
-Command executes the following string.
Start-Process -Verb RunAs runs a process As Administrator:
the shell (%ComSpec%, usually C:\Windows\System32\cmd.exe) starting (/c) the current script (\"%~fnx0\") passing its arguments (%*).
Maybe not the exact answer to this question, but it might very well be what people need that end up here.
The quickest way by far is to:
CTRL+ALT+DELETE
Run TASK MANAGER
Click FILE > Run New Task > type in "cmd" and tick the "Create this task with administrative privileges." box.
Not sure if this helps but this is how I managed to do it. Doesn't help if you need a command to run from batch but hey-ho ... I needed this just because windows explorer is corrupted and needed to fix it.
This is my workaround. Hope this helps someone if not the original poster.
A little late for an answer but answering anyway for latecomers like me.
I have two approaches. First one is based on little alteration to #Dheeraj Bhaskar's answer and second one is new(that is not mentioned in any answer here).
Approach 1: Create a admin command for windows(just for the sake of flexibility).
#ECHO OFF
powershell -Command "Start-Process %1 -Verb RunAs"
Open notepad -> copy/paste above script -> save it as admin.bat in c:\windows
A lot can be added in the above script to make it better but I've tried to keep it simple and also because I'm not an expert in batch scripting.
Now you can use admin as command to run any other command or application with elevated privileges.
To answer the original question- type admin cmd in standard cmd.
Approach 2:Using runas command. For this we need to enable the built-in Administrator account if not already enabled and set a password. This account is disabled by default on most systems.
When manufacturing PCs, you can use the built-in Administrator account to run programs and apps before a user account is created. Source
Steps to enable Administrator account-
Hit Windows+R and type compmgmt.msc which will open Computer Management window.
Go to System Tools -> Local Users and Groups -> Users
You should see an account with name Administrator here(more info about this account can be found here).
Right click on Administrator and select Properties.
Check Password never expires. Uncheck Account is Disabled and everything else then click OK. This will enable administrator account on your system. Skip if already enabled.
Again Right click on Administrator and click on Set Password(by default it has no password set but for runas command to work we need to set a password).
Now windows will show you a life threatening warning which you can accept.
OR If you want to play safe then you should login into it after enabling this account and set a password from there.
Now runas command should work-
Start a standard cmd and type-
runas /user:administrator cmd
EXTRA:
Now we can create something similar to Linux's sudo command. Create a sudo.bat file with following script and save it in c:\windows.
#ECHO OFF
powershell -Command "runas /user:administrator %1"
Now we can do sudo cmd
I did this for my smartctl, and it became a portable App.
I borrowed it from here.
#echo off
set location=%cd%\bin
powershell -Command "Start-Process cmd -Verb RunAs -ArgumentList { '/k "TITLE Smartctl" & color 07 & pushd "%location%" & prompt $g & echo "Welcome to Smartctl cmd"' }"
prompt $g hides the long leading path.
pushd "%location%" is similar to cd /d "%location%"
Saved as smartctl.cmd
Create a shortcut for smartctl.cmd
Copy the shortcut to C:\Users\#YourName#\AppData\Roaming\Microsoft\Windows\StartMenu\Programs
Click search next to the start menu and input smartctl
Right click Pin to Start
Just use the command:
runas /noprofile /user:administrator cmd
Use:
start, run, cmd, then control+shift+enter
You'll get UAC and then an elevated command shell.
Install gsudo tool and use gsudo command. UAC popup appears and eventually command prompt right in the current console window will be elevated:
C:\Users\Someone>net session
System error 5 has occurred.
Access is denied.
C:\Users\Someone>gsudo
C:\Users\Someone# net session
There are no entries in the list.
The tool can be installed using various package managers (Scoop, WinGet, Chocolatey).
Can use a temporary environment variable to use with an elevated shortcut (
start.cmd
setx valueName_betterSpecificForEachCase %~dp0
"%~dp0ascladm.lnk"
ascladm.lnk (shortcut)
_ properties\advanced\"run as administrator"=yes
(to make path changes you'll need to temporarily create the env.Variable)
_ properties\target="%valueName_betterSpecificForEachCase%\ascladm.cmd"
_ properties\"start in"="%valueName_betterSpecificForEachCase%"
ascladm.cmd
setx valueName_betterSpecificForEachCase=
reg delete HKEY_CURRENT_USER\Environment /F /V valueName_betterSpecificForEachCase
"%~dp0fileName_targetedCmd.cmd"
) (targetedCmd gets executed in elevated cmd window)
Although it is 3 files ,you can place everything (including targetedCmd) in some subfolder (do not forget to add the folderName to the patches) and rename "start.cmd" to targeted's one name
For me it looks like most native way of doing this ,whilst cmd doesn't have the needed command
You can use the following syntax, I had the same question and did not think a script should be needed.
runas /profile /user:domain\username cmd
This worked for me, it may be different on your network.
I did it easily by using this following command in cmd
runas /netonly /user:Administrator\Administrator cmd
after typing this command, you have to enter your Administrator password(if you don't know your Administrator password leave it blank and press Enter or type something, worked for me)..
Press the Windows + X key and you can now select the Powershell or Command Prompt with admin rights. Works if you are the admin. The function can be unusable if the system is not yours.
I've created this tool in .Net 4.8 ExecElevated.exe, 13KB (VS 2022 source project) it will execute an application with an elevated token (in admin mode).
But you will get an UAC dialog to confirm! (maybe not if UAC has been disabled, haven't tested it).
And the account calling the tool must also have admin. rights of course.
Example of use:
ExecuteElevated.exe "C:\Utility\regjump.exe HKCU\Software\Classes\.pdf"
I used runas /user:domainuser#domain cmd which opened an elevated prompt successfully.
There are several ways to open an elevated cmd, but only your method works from the standard command prompt. You just need to put user not username:
runas /user:machinename\adminuser cmd
See relevant help from Microsoft community.