As the title says, I need to configure perforce to use a proxy server. To clarify, I am not talking about using Perforce Proxy, but to actually connect to the perforce server (in this case perforce.assembla.com:1666) through a proxy.
Looks like you need a SOCKS proxy.
There are plenty of open source solutions depending on the platform you are using. https://wiki.debian.org/SOCKS
The only way i've found so far to do this is by installing an extra software that forces perforce to use a socks proxy.
1) you set up whatever proxy you want to use
2) you install AllProxy
3) Add your proxy to the proxy list
4) In Manage Rules add a rule.
- On Proxy choose your proxy
- On programs add perforce. Search for p4v.exe (or whatever) (its easier if perforce is already running).
- On remote destination specify the port, or leave to any.
Then use perforce as normal.
Note: there's a default route that goes direct (not using proxy).
Also for HTTP proxy you can set it globally under Windows Proxy settings (on Win10), or use AllProxy.
Note2: This info is based on this answer.
Note3: AllProxy is the only listed soft that worked for me. You could still try the longer route.
Related
I have a cloud-based DB (Snowflake) that is accessed via a proxy. It works perfectly via a browser.
I've got proxy configured using SwitchyOmega as below:
I would like to configure a system-wide proxy with tinyproxy to mimic the above configuration. It's a local configuration for a Mac laptop.
I've installed tinyproxy and the question is mainly what values do I use in tinyproxy.conf to replicate the above configuration with tinyproxy. I presume that's the case of forward proxy, is that right?
I've checked here: https://isabelcmdcosta.medium.com/how-i-set-up-tinyproxy-as-a-forward-proxy-and-reverse-proxy-2a5dc1ed64e4 but still can't get my head around it.
I presume I'm looking to set something like upstream http a-proxy-b.c.net:8008 ???
An example property file or the syntax for crucial configuration bits would be greatly appreciated.
The Internet Options settings are managed by my company's system administrator.
The Proxy is set to use automatic configuration script (http://proxypac.abcd.com/proxyrouting). I cannot disable this.
I cannot change the proxy to localhost. The above PAC script will override no matter what I try to change.
The IT security does not allow me to install Chrome Blazemeter plugin, or install Badboy, or use Fiddler, or be able to manually change the proxy.
The company's proxy host is proxy.abcd.com and port is 8080, but I don't know how this info will help if the browser is reading the PAC file.
Is there any option for me to record JMeter scripts in the above scenario?
Is there any way for me to create GUI scripts with plenty of data and dynamic values coming back from the server without recording (if recording is not an option in my case)?
You can use a browser which doesn't use operating system proxy settings, a good example is Mozilla Firefox. You need to configure Firefox to use JMeter as the proxy
Once done you can configure JMeter to use your company proxy server by putting the following lines to system.properties file:
http.proxyHost=proxy.abcd.com
https.proxyHost=proxy.abcd.com
http.proxyPort=8080
https.proxyPort=8080
These PAC files don't do any magic, they're normal JavaScript files which are being interpreted by browsers to determine which proxy should be used for which URL. For certain URLs you might not even need to use the proxy. So I would recommend checking whether you really need the proxy for accessing the application you're trying to record, it might be the case you don't need this step #2
On Windows, is it possible to configure Atom to use the system default proxy instead of manually specifying the proxy settings in the .apmrc file?
I recently started using the atom-editor for Windows (Windows 7 Pro) and so far I like it. I've been searching for some time to try and get the editor to be able to connect to the outside world and haven't met with any success.
Our network (I'm not a network expert) is configured to use a proxy server (internal) to access the internet. On my system, this is accomplished in the proxy settings with an 'Automatic Configuration Script', for example: http://internal-server-name/sub-dir/file-name.pac.
Many resources have suggested manually setting the proxy information in the .apmrc file:
Not able to connect to atom.io for themes and packages
here:https://discuss.atom.io/t/is-there-any-proxy-settings/710/19
https://github.com/atom/atom/issues/1807
These do not answer my question as I need the system defaults to work
I tried to configure Atom to do this same thing but when I change the .apmrc file to have:
http-proxy = http://internal-server-name/sub-dir/file-name.pac
https-proxy = https://internal-server-name/sub-dir/file-name.pac
strict-ssl = false
I get the following error (presumably because the above address is not the proxy itself):
tunneling socket could not be established, cause=Parse Error
When I leave the .apmrc file unmolested, I receive the following error when trying to view packages:
getaddrinfo ENOTFOUND
Even if I had a proxy server IP address and port number to specify, not only would i not want to hard-code my credentials in a config file but I'm pretty sure the authentication is somehow set up to use Kerberos tokens anyway, so I wouldn't be able to specify them at all.
Interestingly the Atom updates says that my installed packages (out of the box) are up to date, which would seem to indicate that this portion is working while the packages and themes do not.
Here are some screenshots for reference:
No .apmrc changes
Proxy server specified in .apmrc
Edit 08/31/2015
In response to some of the feedback, I tried to view the .pac file and extract the proxy server address information. I was able to get the information about the proxy out of the file and put it in the .apmrc file but it had no affect on the outcome (I still receive the same errors). I have also since tried using CNTLM to no avail.
Also note that my proxy does require authentication as stated above. I've been doing further research on this issue and it may be a combination of proxy settings for the APM and proxy settings for GitHub. See the following relevant article:
https://discuss.atom.io/t/error-running-apm-install-behind-proxy/14812
Ideally, I'd like a solution that doesn't require a complete machine configuration or a fragile multi-config file setup.
A .pac file is just a javascript file that browsers can run to programmatically determine which proxy to use. This is useful if your network needs to use different proxies to access different resources. If you open up that file, you'll probably be able to make sense of it (it's just javascript, after all) and figure out which proxy your network is using for general access to the web. Set that as your proxy in your .apmrc file and it should work.
Things get more complicated if your proxy requires some kind of authentication. If that's your problem, let me know. I have some experience dealing with it.
Authenticating
OK, so you need to authenticate. Then your situation is probably pretty similar to mine. You are correct in using CNTLM, we just need to configure it properly. Your cntlm.ini file will look something like this:
Username <your windows username>
Domain <your domain name>
Password <leave this blank>
PassLM <get this by running `cntlm -H` on the command line>
PassNT <get this by running `cntlm -H` on the command line>
PassNTLMv2 <get this by running `cntlm -H` on the command line>
Proxy <Your proxy address like ip_address:port>
Proxy <If you have multiple proxies, you may list them each on a new line>
NoProxy localhost, 127.0.0.*, <any others that should bypass the proxy>
Listen <a local port to listen on (I use 53128)>
There's something a bit funny that you should know about this file (cntlm.ini). When you install cntlm, it's included in the program's folder but it actually will only work if it's located at C:\Program Files (x86)\cntlm\cntlm.ini. I guess it's probably more accurate to say that it should be in the cntlm folder inside the PROGRAMFILES directory so you should double check that this is the case.
Anyway, having done all that, you can now start cntlm (instructions in the readme). Next, you need to configure apm to actually use your local proxy. Your .apmrc should look like this:
http-proxy = http://localhost:<port # from cntlm.ini>
https-proxy = https://localhost:<port # from cntlm.ini>
strict-ssl = false
You'd think this would be enough but there's more that might help. I had a lot of problems with npm until I found that https doesn't work well through cntlm so I needed to change my registry from https://registry.npmjs.org/ to http://registry.npmjs.org/. Since apm also uses the same registry, I decided to change that too:
apm config set registry http://registry.npmjs.org/
And then... it seemed to also help to go into Atom's config.cson and set core.proxy to http://localhost:<port # from cntlm.ini>
And after all that, I'd expect things to work for you. If it's cool and fine and Atom is working well, there's one more thing that you might want to do that will make most (all?) other apps (npm, git, etc) work well. On the command line, run:
netsh winhttp set proxy localhost:<port # from cntlm.ini> "localhost, 127.0.0.*"
This will save you the trouble of configuring most (all?) other apps one-by-one. For some reason, apm does need to be configured specifically. I guess it doesn't use the winhttp settings for some reason? I don't know the answer to that.
New Info 2016/03/18
I recently noticed that there's one additional thing you might need to do for some apps. You should set the following environment variables to your local proxy as well:
HTTP_PROXY
HTTPS_PROXY
FTP_PROXY
http_proxy
https_proxy
ftp_proxy
It may seem like overkill to set both upper and lower case but I recently installed MSys2 and found that it looks for the lower case versions so just set them all and save yourself some trouble.
You should download the file http://internal-server-name/sub-dir/file-name.pac and open it with a text editor, then find the actual proxy address and port inside it (near a PROXY keyword).
I used this for my trouble with npm and .npmrc
c:\users\%user%\.atom\.apmrc (add if not exist) and put this
proxy=http://YOUR-DOMAIN**%5C**USER-NAME:PASSWORD#YOUR-PROXY-SERVER:PORT/
I want to setup proxy server on our office. I have two proxy server's available i.e. (SQUID for Linux and WinProxy for Windows). I have following requirement.
All the rule's which I define in proxy server like block some specific sites etc. should likely to work.
The "Evolution Mail Client" for linux and "Outlook Express" for windows also should work.
So, can you tell me the guidelines how to achieve both the task especially no.-2 .
Thanks in advance.
Squid is a very good option for a caching proxy. It has a configuration file to block some specific sites, IPs, domains... and to tell him which files has to cache. Making a smart proxy is not easy. But you can find great configurations and tutorials in Google or in his wiki.
There are two ways for setting up a proxy:
Direct proxy: you have to manually configure every computer to use your proxy server.
This is the easiest option. I recommend you using this.
Please note, computers that don't use the proxy can access all pages (even if they're blocked).
Transparent proxy: this is the most secure, ideal option for most cases (including yours). You have to configurate your network and the proxy server to forward any requests to it. This is a hard option and very difficult to achieve in your case.
About your Evolution and Outlook problem, there can't be any problems related to the proxy, don't worry about that.
I suspect that the corporate firewall is preventing gems from getting installed. I have HTTP_PROXY defined and I'm able to view remote gems via the following command:
jruby -S gem list -r
But when I go to install a gem, I get a 404:
jruby -S gem install rails
Is there a good workaround for resolving this issue other than maintaining an internal gem repository?
for ruby gems, placing this in my gem.bat this works for me
#"%~dp0ruby.exe" "%~dpn0" %* --http-proxy http://domainname.ccc.com:8080
for jruby gems this works
#"%~dp0jruby.exe" "%~dpn0" %* -p http://domainname.ccc.com:8080
Also setting the environment variable works like
set http-proxy=http://domainname.ccc.com:8080
or if your proxyserver needs authentication
set http-proxy=http://user:password#host:port)
EDIT: for folks who have a very restrictive firewall or no internet accesss (eg on a server) you can do the following: install the gem(s) on a pc who has free access to internet, afterward you check the folder C:\Ruby193\lib\ruby\gems\1.9.1\cache and copy all the gems with a date last modified after the moment you did your install. On the target pc you copy them in the same folder or if you clean up afterward in your bin folder and start the install there with
c:\ruby193\bin\gem.bat install --local gemname-x.x.x.gem
gemname-x.x.x.gem being the gem filename of the base gem you want to install. The gem with all its dependencies should install. This is for windows, but other OS's can use the same technique, just adapt a few things.
Success
Look in Internet Explorer proxy settings to find the name of your proxy server.
Use the name of your proxy server in the -p option to the gem command.
gem update rails -p http://mylocalproxy.mycompany.com
If this doesn't work, you can always set your own proxy server up on the internet somewhere.
I'm not an expert with Ruby. None the less I might give the following "generic" advices (useful for lots of situations with installers) :
Check which protocol is the installation running over. Some installer download package from mirror instead of main site, and some mirrors might be using FTP or something else instead of HTTP. Thus you might need to update your settings accordingly, and check with your admin that the corporate proxy is able to retrieve data from FTP sites.
Check which user the installer is running as (some of the installer have to escalate privileges to "root". And therefore inherit a different environment with another HTTP_PROXY defined).
Check what the installer program is using to download the packages (lots of distribution package managers rely on curl/libcurl which stores its proxy parameters in a rc file). Same warning as 2 regarding the users whose homedir should contain the rc file.
Transparent proxying : it is possible to transfer on-the-fly HTTP/FTP requests initially targeting the web to a proxy. Either the corporate proxy (if it can work with such an installation) or some mini local proxy which will then cascade to the corporate one.
Setup a quick VPN (either Tunnel other PPP) over SSH (see SSH's man page) between your machine and a special machine within the corporation which is allowed to see the web, then update your routing tables to route traffic through the VPN.
You can also use corkscrew to connect through SSH (and thus be able to install a VPN over SSH like 5) with a machine outside, on the other side of the corporate firewall, like your own at home. (this uses the HTTPS "CONNECT" mode of the proxy to access a SSH outside). Just make sure that the admins are- or at least one person in charge is- kept in loop and don't panic.
Desperate measure : create a tunnel between two machines running each http tunnel, over a proxy which only allows HTTP requests. Then use the tunnel to establish SSH VPN.
These solutions aren't specific to Ruby but can help you through any desperate solution behind an over-restrictive firewall.
1 to 4 should work in most situation. You'll have to resort to 5 to 7 if confronted with some bizarre and/or paranoid firewalls. 7 is rather extreme but always works, although sometimes with catastrophic performance.
Simple thing first: are you in the same shell session when you tried both the list and the install? Maybe you forget to set the env second time around?
Try setting http_proxy instead of HTTP_PROXY.
Make sure the proxy setting is a valid URL (see below)
Do you have multiple proxy options? Open IE and type wpad in the address bar. You might see some other possibilities.
Is your proxy authenticated? If so, do you have your credentials in the URL. Mine is like this (on windows):
set http_proxy=http://myuserid:mypassword#internetproxy:3128
Does your your password have any punctuation characters? Try it with just numbers and letters, as : and # (and possibly others) are significant in the URL string itself.
You can use this tool:
http://ntlmaps.sourceforge.net/
gems don't support proxy authentication, so going through a secondary proxy (like, say, YOUR machine) that does the authentication for you and lets gems think there is no authentication happening should make your life easier.
Another stupid question, but what's the corporate proxy software ? Some Windows-based software tend to used weird authentication standards (NTLM hashes, etc.) which aren't supported by all clients (wget doesn't support it, for example), but are supported by lots of browsers.
Thus even if you tried writing the username and password into the proxy URL, it won't work when you try to download and install a packages, although it works pretty well when you try to display a page in FireFox. I've had similar problems with some corporate network and my distro's package manager.
In these situation, you might use something like ntlmaps. You use it as a local proxy which will then cascade the requests to the corporate proxy. The good thing is that ntlmaps will be able to authenticate the weird NTLM password with the corporate proxy, and all your applications will be able to connect to ntlmaps, even those which don't support NTLM.
I've retested this since the gemcutter.org folks made the mode to Amazon's Cloudfront and am able to download gems again through my employer's firewall.
I described a procedure to get around any restrictions of a corporate firewall in:
How do I update Ruby Gems from behind a Proxy (ISA-NTLM)
It basically uses an ssh tunnel and the programm tsocks.
1.GO to the drive in which you installed ruby.
2.you will find a folder named "ruby200-x64" or something similar to it based on which version you installed.
3.inside the folder open ...bin/
4. find gem.bat, open it with any text editor you will find a bunch of settings.
5. after #"%~dp0ruby.exe" "%~dpn0" %* place you proxy server address and port.
**
#"%~dp0ruby.exe" "%~dpn0" %* --http-proxy
http://domainname.ccc.com:8080
**