I've created a Watch App in XCode, blank app, can't see the scheme to launch watch simulator.
I've also looked into settings under build/Architecture etc. and changed them from iOS to watchOS but still unable to get it working.
The question, how to make this test project run in a watch simulator. (screenshot 1)
on a side note, under WatchFramework I do see simulators. (screenshot 2)
I've had this happen sometimes when switching between Xcode betas.
Have a look under Build Settings and Deployment for the Watch App Target and make sure the correct version of watchOS is selected.
Also double check SWIFT_VERSION and TARGET_DEVICE at the bottom under User-Defined
Today in the morning I tried to compile my project to run in my device and I found the destination toolbar disappeared and I cannot choose my IOS device or IOS Simulator device as target. (I can do it in the Product/Destination Menu)
After some research I found the >> at the right on the screen and when I pushed a Scheme option appeared but it is disabled and I can't enable again.
This is what I tried with no success:
Open an old project to see if the problem was in my project
Create a new project (with Swift and Objective C but I don't think this make any difference)
Restart my computer
Hide and show the toolbar (View menu/Hide Toolbar and the View menu/Show Toolbar)
I tried all the previous options with the device connected and disconnected
I have installed the IOS Simulator 8.4 (when I run my project it runs in the last selected simulator) and XCode 6.4.
Looks like Xcode hides that menu when the window is a certain size. I have to make my window quite large before it comes back.
Not a fix as such but you can work around it using the menus: Product > Scheme and Product > Destination
You're probably running into the same issue I am. Like #BrandonWilliams said in his answer, it appears again if the Xcode window is wide enough. The underlying cause, for me at least, seems to be that in this build of Xcode (6.4) running on El Capitan beta 2 (with Xcode 7 beta installed), I am seeing duplicate simulators for iOS 8.4. And since there are two of the same version, the Schemes dropdown shows some sort of long GUID next to each one, causing the Scheme dropdown to be quite large:
I came to SO looking for an answer but realized that I had seen this issue before.
So the problem is basically that auto layout sucks (I mean it is not working properly in Xcode 6) and on El Capitan, the destination toolbar is for some reason hiding instead of collapsing properly. So when your Xcode window is narrow, the destination toolbar disappears.
But, if you expand the window far enough, it shows back up again.
In case you can't tell, in the first screenshot, the window is about 1241 pixels wide and in the second screenshot the window is 1541 pixels wide.
Go to Product then Destination and choose at which simulator or device you want to test your build.
I'm running with same problem. You can select device or change scheme using below steps:
Select Product from menu
Select Scheme or Destination
Select required Scheme option or Destination option
Alternative Solution:
The only solution is to use Xcode 7 or above. I've installed Xcode 7.1 and found Scheme/Simulator list available. Refer screenshot.
It seems that Xcode 6 or below doesn't support OS X El Capitan.
I am still seeing this problem in Xcode 7.2 on iMac with resolution 1920x1080. Resizing the XCode windows dens't help. I can have the menu bar back if I push the green button and go to full screen mode. But that's pretty annoying. This is how I finally figure out a solution that works for me. I notice that only if I open the project file that I have been working daily that the menu bar is missing. If I create a new project, the menu bar is there. And here is my solution:
Remove your project file on disc (or move it to a different folder)
Open the Welcome to Xcode window by shift+command+1
Make sure your project is no longer under this list. If it is still there, click on it and Xcode will tell you the project is not found and it will be removed.
Add the project file back and open it and I have my menu bar back (if you have moved it, simply opening it from a different file location may work I guess)
I guess the problem is that some cache value in Xcode about the project file is messed up somehow. Hope this helps.
I make my XCode screen little big and now find both options.
On XCode 9.0 beta, this worked for me: select View -> Show Toolbar from menu
right click on title bar -> select show toolbar
Fixed it by deleting the following file ~/Library/Preferences/com.apple.dt.Xcode.plist and restarting Xcode.
The downside is that Xcode preferences dropped to defaults obviously.
I sometimes get a dialog in Xcode which states "Simulator in use." Restarting Xcode didn't help.
I have no Simulator Icon in the Taskbar to quit it and I have no running Simulator.
Is there any solution without rebooting?
I know some of these points to not adress your specific issue since you wrote restarting Xcode would not help you but I'll try to provide a full list of possible fixes for people who might stumble upon this one day.
Is the "Stop" Button in the left corner of Xcode still clickable ? ==> Click It
Try to reset contents & settings of iOS Simulator
Clean Build & Clean Project
Quit iOS Simulator (look at the Activity Monitor if there is still something running)
Restart Xcode
Restart Mac
This is all I can think of. For me most of the times I can resolve it by just restarting Xcode. As you wrote this does not work for you so maybe some of the other points of my list will help you.
Normally this happens when you terminate the iOS Simulator but not the debug session itself, which is why most of the times the "Stop" button in the left corner is clickable most of the times...
This dialog (and the state that triggers it) comes entirely from Xcode and not the simulator itself. This dialog will present itself if Xcode is already using the simulator from another workspace. For example, if you have three projects open at the same time and you do a Build&Run (eg: click "play") in one of them, you will get this dialog if you do a Build&Run in one of the other projects.
I create an extension for my app in iOS 8 and it is displayed correctly under the Today tab.
However when I make a change to the extension (either a UI change in the Storyboard, a UI change in viewDidLoad code, or some changes in the widgetPerformUpdateWithCompletionHandler method), there's nothing that is changed when I recompile. The only way I can make the changes to appear is to delete the app from the device/simulator then compile/install again. Restarting XCode (I work with XCode 6 beta 4) / restarting the computer does not help.
How can I fix the bug?
How am I supposed to debug the extension, because setting breakpoints does not seem to do anything and no NSLog messages are printed to the console (I suppose, since it's a different target).
It's a known bug, read the release notes for iOS 8b5.
Debugging (and NSLog) works in Xcode but not always (known bugs). You can still attach the debugger if Xcode cannot attach himself (Debug -> Attach to process)
For me, the simulator works better than real device, so use the simulator until things got better.
2 tips:
Close the simulator at end of debugging (i have a script for auto closing the simulator when i press STOP in Xcode, tell me if you want it).
When you launch the plugin process in simulator, wait for "All applications" display list, if you click "Run" before the list are loaded, the debugger won't attach.
When i run simulator in my xcode 5 and later on if i try to change simulator Device from under menu 'hardware' of simulator it getting crash. which is something unlikely to xcode previous versions. Is it my xcode copy specific bug or something else?
I had the same problem. Instead of changing the device in the iOS simulator, change to the device of your preference in XCode. Notice your project name in the top left hand corner next to build and run button and stop button. To the right of that is a drop down for different device names. Pick the one that you'd like to simulate. Then build and run in iOS simulator.