I have a ContentView with a StackLayout with multiple children sized to the full width of the screen. In other words, if the screen width is 320 and I have five children, the inner StackLayout is resized to 1600.
In this ContentView, I have Next and Previous buttons that when clicked, animate the inner StackLayout's TranslateX property. Basically, I'm creating a carousel by translating the StackLayout within the ContentView. I chose this route because I was having layout issues using a ScrollView and a custom renderer when I would modify that layout of the view (by hiding labels, etc.)
However, I've hit a snag. Content that appears after I set the TranslateX property doesn't receive any tap events. I believe I might have to reset some tappable area, but I'm not even sure where to begin with that. Does anyone have any suggestions?
I posted this same question in Xamarin's Forums, and someone there answered. For anyone looking, the answer is here: https://forums.xamarin.com/discussion/comment/142914/#Comment_142914
If that link stops working at some point in the future for some reason, the relevant answer is:
Hit testing is done based on the actual frame of the control determined by layout, but translation happens after layout. Therefore hit testing does not take translation into account. If you want a view to be touchable then you should update its layout directly rather than using translation.
Related
I'm essentially making a 'shopping cart' UI and I want it so that when the user hits the 'Add' button, a little tiny box-label appears at the bottom of the screen that says 'Added Item' or something like that.
My question is how to do that with my current set up. I am currently using a nested Grid inside of a Scroll view for the main content of the page. I want the box-label to fade in at the bottom of the screen and stay located at the bottom of the screen ontop of everything else even if you scroll, until the animation fades.
Now i figure it doesn't make sense to add it into the grid since the grid's end will be out of view in the scrolling part of the scroll view, and same for the Scroll View. I am considering nesting the entire scroll view inside of a stack layout but i fear the button will just be located at the end of the stack layout under the scroll view instead of on TOP of the scroll view. How do you recommend I achieve this effect?
I prefer not to use a custom renderer if possible due to my lack of experience in the three separate platforms.
Thanks
Make vertically oriented stack layout. When you need to add you animation add it programmatically to the stack. When it finishes remove it from stack. Your scroll view will not affect animation
I have perhaps a beginner's question but have not found any solutions addressing this specific problem after searching endlessly on stackoverflow and other forums.
My detail view in the storyboard appears to be too zoomed in. At this point, zooming in and out simply zooms in and out on the storyboard, but not the detail view specifically.
Indicators of this are that the alignment arrow to the left of my button is not positioned at half-latitude of the Detail View box, although when I align my button to this marker I do see a crosshair indicating that my button is "centered".
Detail View - Further Out
Upon simulation, it is apparent that using these crosshairs produces a run-time alignment far right and up from being centered. Where my button is currently placed seems to be in the center of the simulator screen but would like my guidelines to allow the button to be centered using the guidelines suggested.
Simulator View
A) How do I "zoom out" within the Detail View so I can see the entire screen in the detail view?
B) How can I center my object if the guidelines are inherently off-center?
Thank you so much for you advice and input.
Are you using constraints to keep the various controls in place etc...?
If not try:
Select all elements in the UI of the detail view. Click on an empty spot somewhere in the View and press CMD + A.
Click on resolve auto layout issues at the bottom right of the Nib editor. (it's the right most icon)
Click on Clear Constraints
Click on resolve auto layout issues again, then Reset to Suggested Constraints
From here, tweak your constraints as per the UI you're working with i.e. iPhone, iPad and whatever orientation it's in etc...
I forgot to mention how I fixed the "too zoomed-in" problem.
In the storyboard controller, on the left navigator panel, within the file inspector, I simply unchecked "Use Size Classes" within the Interface Builder Document section. My view controller changed into a normal iPhone shape and everything finally fit into place.
I'm trying to learn auto layout so I can set up a moderately complicated display the way I want. I'm starting with a simple version. At least I thought it was simple.
I have a content view containing a NSScrollView, and a zoom slider. The scroll view is, of course, just a window into a larger 'canvas' on which the user can do things.
I'd like the scroll view to be as big as the window allows, with the slider underneath.
I've tried many things none of which work, in some cases when I resize the window smaller, the scroll view goes on up over the window's top bar, obscuring the title and the red yellow, green, dots.. this is just a grumble, I won't attempt to describe how I got it.
I'm working with Visual Format Language.
The immediate problem: I can only get the thing to work at all if I put in a hard size constraint on the scroll view.
I've got constraints like #"V:|[ScrollView]-[ZoomSlider(==35)]-| and
#"|-20#1000-[ScrollView]-|"
With these, nothing shows at all, until I put a hard size on the scroll view:
For example, #"V:[ScrollView(>=70#20)]" and #"[ScrollView(>=140#20)]" results in a little tiny scroll view (as expected) just above the slider.
Window is resizable, all right.
Is there a simple way to make the scroll view resize to occupy the most space possible when I resize the window? The only way I can think of off hand is to produce metrics for the scroll view based on window size, and use a notification to change the constraints when the window size changes. There should be something simpler!
THanks.ee
OOps. Thought I knew the answer until I started to write it.
AT least here is a partial explanation of things that were causing me problems.
You can't add constraints that position or size the Window's content view. But apparently you can mess them up by deleting them programatically. Some of my problems were solved by getting rid of
[self.myContentView setTranslatesAutoresizingMaskIntoConstraints:NO];
and
[self.myContentView removeConstraints:self.myContentView.constraints];
This left me with a lot of conflicting constraints. I fixed this be eliminating all content window constraints that I could in IB, then by marking the rest as placeholders.
I've got a ways to go before I understand how to use auto layout, but doing it in code is easier (for me) than doing it with IB
I would like to programmatically allow the user to zoom away from a current page inside of UIScrollView and present them with an overview of multiple pages. Then allow them to touch/choose one of the pages to zoom in.
I have multiple sub ViewControllers for each page. The important aspect is that each ViewController contains detailed information, so I want most of that information to be visible when they get a "birds eye view" of what's happening.
What's the best way to do this?
Additional detail: pretend each UIViewController has a UiTableView within them. There's 5,6,3,1,0,10 Cells in each of these (respectively) is there a way to show all Cells at once in the larger view?
Perhaps is there a way to screenshot the Views and present them as smaller objects?
Currently I have the UIPinchGestureRecognizer already working, just need a way to control the transition of these viewcontroller into the middle. Is there a way to screenshot each controller and transition to a different view for selection?
If You want it for a pdf viewer, then maybe you can implement something similar to this:
https://github.com/vfr/Reader
When corresponding button is pressed - modally rises up a gridview with smaller pages. When taped on any - it then opens that page.
If it's not about pdf viewer, and You still desire the pinch-zoom effect, then maybe you can implement two different views - where - on one will be in grid - all viewcontroller thumbnails, and on other - scrollview. When you pinch -zoom out - scrollview alpha changes to 0, while gridview list alpha changes to 1. When taped on any viewcontroller thumbnail - alpha changes.
If You still want without fade-in fade-out, then it's even harder. On each pinch zoom movement, you need to recalculate each viewcontroller positions and sizes. and start moving them where they should be.
Hope that helps.. somehow..
I've been struggling for weeks trying to crack this nut so I'm not sure if it's impossible, or if it's my lack of coding chops... or both. I'm not a programmer and I'm a newbie to Dojo Toolkit.
I have a site using the BorderContainer layout. I'm trying to create an effect where I can use a button to open and close a dropdown type box that will contain controls. I need this dropdown to be hidden on page load, and then open when you click the button.
My problem is that when I open the dropdown, it pushes the content pane below it off the bottom of the browser window. I need the lower ContentPane to stay fit within the remaining space of the browser window when the dropdown opens. Additionally, I want the dropdown to sit outside of the scrollable container for the content below it, which is why I have it set up to sit outside a nested BorderContainer below it.
I've created a simplified version of the code to demonstrate my challenge (see link below). If you load the page you can see the center ContentPane scrolls the content. But, if you then click on the button, a dropdown div expands above the content. Then when you scroll, you'll notice that you can't see the full pane because it's in no-man's-land below the bottom of the browser window. I assume that because the div is set to display:none on load, it's size is not accounted for on page load. Then, when you open it by pressing the button, it's size is additive and the pane below doesn't know how to resize or account for the new element.
I've tried using the visibility attribute, but that leaves a gap for the div when it's still closed. I've tinkered with some code that controls the height that shows promise, but each of my dropdown boxes will be different sizes so I'd prefer that the height be set to "auto" rather than a specified pixel size.
Does anyone have any idea how I can accomplish this so that the lower pane will fit in the space without pushing off the screen?
Here's a sample of the page:
http://equium.com/scaffold.html
(I had some problems trying to insert the full HTML page here as a code sample so if that's a preferable way to handle it, and someone can let me know the best way to embed all of that code, I'd appreciate it.)
Thanks is advance, I'd really apprecaite anyone's feedback.
You might want to take a look at dojox.layout.ExpandoPane (though be warned I think it has only worked properly for top and left regions for a while).
Also, I'd suggest simplifying/altering your layout a bit. See example here:
http://jsfiddle.net/taFzv/
(It'd probably need some tweaking to get exactly what you want.)
The real issue you're having is probably that the BorderContainer has no idea that parts of the view resized. ExpandoPane takes care of that by telling the BorderContainer to re-layout after its animation completes.
It works under IE8.0. When dropdown box open, just keep pressing mouse from page and drag to bottom, you could see the content was pushed to out of page. It looks the browser could not detect it and could not add it to "scroll bar" account.
I would suggest taking out all BorderContainers except your top level one, the one with mainPage as the id.
Place your {stuff here} div into the mainPage BorderContainer, after the ContentPane with the Close/Open button. Make sure you make it dojotype dijit.layout.ContentPane, set up layoutpriority, and set region to top. Set the height to 0/x when clicking the Open/Close button, instead of setting display.
Try your page again. If that doesn't fix it, you probably need, a call to layout, resize, or both to indicate to the BorderContainer that it needs to evaluate all its children and size the "center" pane properly. Something like dijit.byId("mainPage").layout(); Do this any time someone presses the Close/Open button, after you have changed the height of any BorderContainer children.
Maybe the dijit.form.DropDownButton would fit your needs. When click the button a tooltip is displayed that can be filled with any content you want. Just as you specified, the dropdown tooltip is only displayed when you click the button, and it doesn't mess with the underlying layout at all. The tooltip sits "on top" of the page.