I am trying to compile .sh file from MATLAB on Windows. When I type mcc -m filename.m it generates .exe file but I would like to run it on Ubuntu server. Is it possible to make it on Windows?
The .sh file extension is typically used for shell scripts. Check the first line of your file. If it reads !#/bin/bash or so, you are looking at a shell script which has nothing to do with matlab. Instead, you may want to install cygwin to have the usual Linux/Unix shell programming environment available on windows.
Related
I am following this tutorial where i have to run this command in order to start the zookeeper server.
./bin/zookeeper-server-start.sh config/zookeeper.properties
But the problem is this command is not working properly. I found that .sh file is bash file that required cygwin. I have installed it and then run command like this
C:\cygwin64\bin\bash.exe ./bin/zookeeper-server-start.sh config/zookeeper.properties
But it is showing:
I can confirm that in bin directory the file is exsits. what i am doing wrong?
Here is my directory snapshot from where i running the command:
Note: I have successfully tested bin/windows zookeeper bat file but i want to run it through .sh file as the kafka security tutorial which i am following using this.
From your screenshot, I conclude that you are using Cygwin. So, please add the cygwin tag to your question.
As you can see from the error message, the command dirname is not found by bash, so assuming that your Cygwin installation is not broken, I assume that the PATH is not set correctly; in your setup, dirname.exe should be in C:/cygwin64/bin (please verify this).
Your usage of bash.exe is a bit unusual in that you run it directly from a Windows cmd prompt. The more common way would be to use it from the 'Cygwin Terminal', which you get created a Windows-link to, when installing Cygwin, or to use another suitable Terminal program; I'm using for instance mintty for this task (also available via the Cygwin installer).
Having said this, it is possible to run bash.exe in the way you are doing it, but you then have to ensure, that at least the PATH is set up correctly. One possibility to do this, is to add C:\cygwin64\bin to your Windows PATH, but this has the drawback, that some commands have the same name in the Windows world and in Cygwin, though they serve a completely different purpose, and this will bite you sooner or later. Another problem is that at some point, you will rely on other bash specific setups besides the PATH.
A better way to accomplish your goal is IMO to ensure, that the system wide bash-initialization files are sourced by bash. If I have to run the script from a Windows cmd prompt, I would run it by
C:\cygwin64\bin\bash.exe --login YOURSCRIPT
This will read the file (in your setup) C:\cygwin64\etc\profile before running YOURSCRIPT, so you can check, that the PATH is correctly set there, by looking at this file. In a default installation, this should be the case.
After having read this file, it will try to read the file .bash_profile in your Cygwin HOME directory, so if you need additional settings for your (non-interactive) bash-scripts, create this file and put your settings there.
I'm extremely new to Cygwin but I am somewhat comfortable in Linux (I can read man files fine).
I want to create a BASH script using Cygwin that deletes the files in a folder on the shutdown signal given by Windows. If this can't be done, I also could try deleting the files in the same folder on startup. I installed CRON but does CRON only works for scheduled tasks, rather than on 'signals'? Answers would be nice but a general idea of how to proceed would be even better!
I can write the script. I just don't know exactly how Cywgin interacts with the Windows OS in order to perform these procedures.
Another question, how do I run CRON on Windows startup?
If it matters, my O.S. is Windows 10 x64 running Cygwin.
Cygwin.bat, a batch file which was installed under cygwin installation folder will give you hint of how to run cygwin script.
The script contains just:
C:
chdir C:\cygwin64\bin
bash --login -i
to run the bash shell interactive.
Make a copy of Cygwin.bat with another name (Startup ?) and change last line in
bash --login path_to_your_script_here
Put the bat file or a link to in in the Startup folder.
Great thread over here: https://serverfault.com/questions/245945/autostart-cygwin-on-windows-boot-and-run-a-cygwin-command
tl;dr
you can put command directly:
#echo off
C:
chdir C:\cygwin64\bin
bash -c "/usr/bin/whatever"
I want to run a bash script on a mac remotely from a batch script on a windows machine. On Windows I have this:
#echo off
echo bash /applications/snowflake/table-updater/test2.sh; exit>tmp_file
putty -ssh User#remote_machine -pw password -m tmp_file
And here is test2.sh on the remote machine
#!/bin/bash
# test2.sh
#
#
7za x table-apps.zip -y -o/Applications/snowflake/applications
When the batch file runs it logs in successfully, but for some reason fails to run the bash file. However the bash file runs fine from mac terminal, where it unzips the files perfectly. What could be happening here?
Please note test2.sh is actually in Applications/snowflake/table-updater as specified in the batch file. And the tmp file does write fine as well. My aim is to have a script to access a further 10 remote machines with the same directory structure.
Thanks in advance
The standard program which resembles the scriptable Unix command ssh in the PuTTy suite is called plink, and would probably be the recommended tool here. The putty program adds a substantial terminal emulation layer which is unnecessary for noninteractive scripting (drawing of terminal windows, managing their layout, cursor addressing, fonts, etc) and it lacks the simple feature to specify a command directly as an argument.
plink user#remote_machine -pw password /Applications/snowflake/table-updater/test2.sh
From your comments, it appears that the problem is actually in your script, not in how you are connecting. If you get 7za: command not found your script is being executed successfully, but fails because of a PATH problem.
At the prompt, any command you execute will receive a copy of your interactive environment. A self-sufficient script should take care to set up the environment for itself if it needs resources from non-standard locations. In your case, I would add the following before the 7za invocation:
PATH=$PATH:/Applications/snowflake/table-updater
which augments the standard PATH with the location where you apparently have 7za installed. (Any standard installation will take precedence, because we are adding the nonstandard directory at the end of the PATH -- add in front if you want the opposite behavior.)
In the general case, if there are other settings in your interactive .bashrc (or similar shell startup file) which needs to be set up in order for the script to work, the script needs to set this up one way or another. For troubleshooting, a quick and dirty fix is to add . /Users/you/.bashrc at the top of the script (where /Users/you should obviously be replaced with the real path to your home directory); but for proper operation, the script itself should contain the code it needs, and mustn't depend on an individual user's personal settings file (which could change without notice anyway).
On Linux, it was pretty easy. I just did
Runtime rt = Runtime.getRuntime();
Process p = rt.exec(shell location);
p.destroy();
But how do I do this in windows which doesn't natively allow .sh scripts? I can get the script to run using Cygwin. Is there a way I can somehow use Cygwin within Eclipse to run the script?
perhaps try adding the cygwin bin directory to your system PATH and then launch the sh.exe with the script as an argument.
Launching sh.exe (Cygwin, MinGW, or whatever) with the script as the argument is probably the best solution.
Another solution might be to update your folder options so that files with a .sh suffix are opened with sh.exe.
When I execute a .bat script from bash in Cygwin, by what mechanism is it running? I understand that if I run a .EXE it will launch, regardless of whether the .EXE is from Cygwin or from a more traditional environment. I understand that when I execute an executable script with #! at the beginning that Cygwin supplies the magic for it to run.
But why does a .bat script work? Is there some component inside of Cygwin that is aware of what a Windows .bat script is and what to do with it? Or is it that it is somehow impossible under Windows to execute a call to launch a .EXE file that won't automatically also work for a .bat script instead?
Running
./test.bat params
from bash seems to be equivalent to
cmd /c test.bat params
I believe that bash in cygwin sees the bat extension as being flagged executable (a cygwin hit-tip to windows convention). As such it loads and executes the file with it's associated interpreter (cmd.exe, per os configuration), much as it creates a new instance of bash to run your #! scripts (per posix standard).
And if you want to fork an *.cmd file execution like a ShellScript process and append his log to an file:
cmd /c test.bat > nohup.out &
Enjoy!