Installing pyinstaller via pip leads to "failed to create process" - windows

Does anyone know why pyinstaller immediately fails after installed via pip via anaconda 32bit?
I installed pyinstaller via pip install pyinstaller through the anaconda command prompt on Windows 64 bit using 32 bit anaconda (because I want to create 32 bit executables)
Yes I read pyinstaller --version failed to create a process and pip/easy_install failure: failed to create process and How to install pyinstaller using pip
I did not rename any files I installed anaconda 15 mins ago, pycharm 10 mins ago, and pyinstaller 5 mins ago. I uninstalled pyinstaller via pup uninstall and reinstalled in the anaconda scripts folder, this did nothing.
Any insight anyone? #windowsfrustrations
Path
C:\Users\me\Anaconda\Lib\site-packages>PyInstaller

[Update: So apparently the root fix for this is in setuptools. The fix went into setuptools version 24.3.1 released July 23, 2016. Upgrading to anything newer than that should take care of this.]
It turns out this is a bug in pip. As mentioned in the other answer it has a problem with spaces in the path to the python install.
Specifically it leaves out quote marks in the generated launcher scripts. The scripts can be found in \Scripts\ (e.g. C:\Program Files\Python 3.5\Scripts). For pyinstaller there 4 pyi-* and a pyinstaller-script.py scripts.
You can work around this relatively easily by editing the first line of each script. The generated first lines will look something like:
#!c:\program files\python 3.5\python.exe
# EASY-INSTALL-ENTRY-SCRIPT: 'PyInstaller==3.1.1','console_scripts','pyinstaller'
Just add quotes around the shebang command, like so:
#!"c:\program files\python 3.5\python.exe"

This error seems to occur when Python’s (or PyInstaller’s) path contains a space (for example, when one installs Python to the Program Files (x86) directory.)
I suspect that somewhere in PyInstaller’s source code there are some missing quotation marks.
Try installing Python in a path without spaces, and installing PyInstaller (via pip) to that path.

As StationaryTraveller mentioned, you can work around this bug by calling script pyinstaller-script.py
Below is an example
C:>"C:\Program Files (x86)\Python35-32\python.exe" "C:\Program Files (x86)\Python35-32\Scripts\pyinstaller-script.py" script_to_compile.py

As of July 2016 the issue was reported as fixed, ugrading pip, setuptools and then uninstalling and installing pyinstaller should remedy the problem

I had the same issue, even with pip and setuptools updated, and the problem was that pyinstaller-script.py, found in C:\Python35\Scripts\ directory, had the wrong path for python.exe.
Python on my system was somehow installed in AppData, but its' scripts and modules were being installed in C:\Python35\ folder.
Changing the first line of pyinstaller-script.py to the correct path of python.exe (Programs directory inside AppData), with quotes if there's any space in the folders' names inbetween, and it should work and no longer show the "Failed to create process".
Example:
#!C:\Program" "Files" "(x86)\Python\python.exe
Using Windows10 and Python35 official installer got Python installed there somehow.

I fixed it [Anaconda 3.4] by doing this:
Enter Anaconda Command Prompt
Get to anaconda scripts folder by: cd /path/to/anaconda/Scripts
Write: python pyinstaller-script.py path/YourScript.py
Worked like a charm.

"C:\Program Files\Python35-32\python.exe" "C:\Program Files\Python35-32\Scripts\pyinstaller-script.py" --onefile --windowed ex_btn.py
--onefile : create only exe,
--windowed : exclude the prompting CMD,
ex_btn.py : python script file.
This worked like charm.

python -m pip install pip worked for me.
With Anaconda version of Python 3.5.2 and 3.6.0(Upgraded for this error, but the error appears to be the same with both versions), I had encountered the same error message with command pip install pip, or pip install whatever/ conda install whatever.
I had both Python 2.7 and 3.5, but pip install --upgrade pip had been working every day, until a few days ago.

In my case, I uninstall and install pyinstaller, then every things work well.
It may relate to any changes within python after installation, so re-installing is a good choice.
uninstall:
pip uninstall pyinstaller
install:
pip install pyinstaller

Related

How to Fix Entry Point Not Found while installing libraries in conda environment

I'm working on Anaconda by making multiple environments in it. I have made an environment camelot and now I want to install different libraries in this environment. So for example to install pandas in this environment,
I'm writing:
conda install pandas
or
conda install -c conda-forge camelot-py
Then it gives me this error:
python.exe-Entry Point Not Found
The procedure entry point OPENSSL_sk_new_reserve could not be
located in the dynamic link library.
C:\Users\abc\Anaconda3\Library\bin\libssl11_-x64.dll
First I thought it may be because of the environment variable, thus I set an environment variable for Python, but this did not resolve the issue.
as it is suggested in here I could solve this problem by copying libssl-1_1-x64 dlls in Anaconda/DLLS to Anaconda/Library/bin (probably replacing it)
I got the same issue while updating Anaconda navigator, and got it over by replacing the file libssl-1_1-x64.dll in Anaconda3/Library/bin with the one from Anaconda3/DLLs.
As mentioned by an Anaconda maintainer here ...
moving libssl dlls around like that is really not advisable. Those
DLLs are duplicated because you have something fishy going on in your
packages. There should not be any openssl DLLs in the DLLs folder.
They should be in Library/bin
By looking at the JSON files in the conda-meta directory I found out that DLLs\libssl-1_1-x64.dll was installed by the python 3.7.0 package, and Library\bin\libssl-1_1-x64.dll was installed by the openssl package. After further investigation I found out that Python 3.7.0 does not install OpenSSL as a separate package, but Python 3.7.1 (and later) does.
Typically upgrading Python goes as expected, but if you somehow end up with both python 3.7.0 and openssl packages installed simultaneously there will be two libssl-1_1-x64.dll files and your Anaconda distribution will be broken. (You can easily verify this with the conda list command.)
I think the best way to fix it is therefore:
Rename Library\bin\libssl-1_1-x64.dll to Library\bin\libssl-1_1-x64.dll.org (your are going to need it later.)
Copy DLLs\libssl-1_1-x64.dll to Library\bin\libssl-1_1-x64.dll
Update Python to version 3.7.1 or higher, for instance with conda update python. This will remove the DLLs\libssl-1_1-x64.dll file.
Delete the current Library\bin\libssl-1_1-x64.dll file.
Rename Library\bin\libssl-1_1-x64.dll.org back to Library\bin\libssl-1_1-x64.dll. This is necessary because I got HTTP errors in the next step otherwise.
Reinstall OpenSSL with conda install openssl --force-reinstall to ensure it's up to date again.
I had the exact same issue, and it also just started today. Kind of destroyed my entire work day, tbh...
I accidentally did a conda install ... in my base environment, and it updated conda and a handful of other modules. (Conda went from 4.5.12 to 4.7.10, in my case.) Anyway, after I rolled it back, things are working as expected again.
If this is what's causing your issue, here's a fix.
conda list --revisions
conda install --revision 1 (In my case "rev 1" was my most recent, stable base environment.)
(More details about this: https://sriramjaju.github.io/2018-05-30-2-minute-recipe-how-to-rollback-your-conda-environment/)
Now I'm worried that I've inadvertently configured something in a way that isn't compatible with the newest version of conda.
Edit: Don't follow this last suggestion if you're doing anything other than playing around in a conda environment to test-drive modules. See this and this.
Lastly, if you really need to install modules and do some work ASAP, pip install [module name] was still working for me before I thought to do the reversion thing.
My problem was same. I just uninstalled anaconda, and install it again. And the problem solved.
I was receiving the same following error while updating spyder and conda package.
python.exe-Entry Point Not Found
The procedure entry point OPENSSL_sk_new_reserve could not be
located in the dynamic link library.
C:\Users\abc\Anaconda3\Library\bin\libssl11_-x64.dll
solution:
I did replace libssl-1_1-x64 dlls from Anaconda/DLLs to
Anaconda/Library/bins as suggested here.
Before opening Anaconda Navigator desktop app, I updated conda in Anaconda Prompt using conda update conda. conda successfully updated.
Then I have updated spyder using conda update spyder command in
Anaconda Prompt. spyder updated and running successfully.
For those still having similar issues with libssl11_-x64.dll or other .dll files:
Use pip install instead if you can!
I had the same issue today with libcrypto-1_1-x64.dll when trying to install plotly using
conda install -c plotly plotly
This prompts a downgrade for anaconda, and in turn raises the error:
OPENSSL_sk_new_reserve [...] libcrypto-1_1-x64.dll
Instead, using for example
pip install plotly==4.1.0
works like a charm!

Can't get pip working with psychopy install

I am very new to python and plan to use psychopy quite a lot. I am on a work computer but have full admin rights.
Psychopy came with python version 2.7.11 and includes setuptools already.
I am trying to install the selenium module, but having trouble getting pip to work at all.
In cmd, it is recognising the 'python' command, so I know python is in my path.
I get the message "can't open file 'pip': [Errno2] No such file or directory" from:
python pip install selenium
I get " 'pip' is not recognised as an internal or external command" from:
pip install selenium
When I change directory to where pip is located, I get:
Fatal error in launcher: Unable to create process using '"'
Using pip2 makes no difference.
It seems a simple thing but where am I going wrong with this?!
I never really got to the bottom of this, but this is what I found out and here are the commands that worked for me in Windows. Be aware that I am far from expert!
To run python scripts (*.py) from command line (cmd) then C:\PsychoPy2 and C:\PsychoPy2\DLLs need to be in path. ('Path' contains directories or file extensions that can be more globally accessed, i.e. do not require you to change the prompt to the relevant directories first).
To check, open cmd and either type echo %PATH% or just type python. (If python starts, the line will say >>>. You can exit by typing quit())
To add to path, get properties of computer, then advanced system settings, then environment variables.
To check pip.exe (a sort of installation wizard) is installed, either search for the file, or check C:\PsychoPy2\Scripts for it. This may also need to be in path.
To reinstall the latest versions of pip and setup tools, I went to cmd and typed:
python -m pip install -U pip setuptools
If the same code did not work for other modules (which in my case was due to network access), then I downloaded the wheel file (*.whl) for that module (from their website) and ran the following code:
python -m pip install c:/modulename.whl
These may not be the correct ways of doing things, but they worked for me when I couldn't get other ways to work!
I've just had the exact same issue with the pip install, and a conflict with PsychoPy installations. I think it's because python automatically wants to call on the path that's been set by Psychopy, so it can't get to the 'pip' folders that for me, remain in a temporary/hidden file. This wasn't intuitive for me - on any machine without psychopy python just 'works' when you download it.

Python 3.6 Mac OS X - How do you get PIP install?

In various educational guides, I have been guided to install Python modules with an easy one-line command entered in the terminal: pip install whatever
Well, when I type "pip install" it is not found.
Elsewhere in Stack Overflow the following instructions have been given:
Use apt-get -- but I am not using linux
Use easy-install pip -- but
it also produces command not found.
Use easy-install3 pip -- same problem: command not found.
Does PIP not install when you install Python 3.6?
Do I really have to edit the path myself - it seems to me, if necessary, the developers who created the installer would have done this and the path would have been updated when Python was installed.
Poking around the hidden system folders in OS X, I see that there is an alias called pip3.6 in usr/local/bin that was created a week ago when I installed Python 3.6.
I would try:
pip3.6 install whatever
Right, worked it out now.
Pip is installed when Python 3.6 is installed - but instead of typing "pip install", you type:
pip3.6 install <ModuleYouWant>
I guess this is so people can run Python 2.7 and 3.6 simultaneously.. it'd be nice if it were a little more intuitive though, or there were some instructions, or it just worked as pip gave you the option "2.7 or 3.6?"
For those OS X users in the dark like I was, please note that system files like the usr folder can be seen in Finder if you press Command+Shift+G then in the dialog box that pops up type /usr (There are other ways to see hidden folders too).

Can't install psycopg2

I'm trying to install psycopg2 so I can use PostgreSQL in Python and Django. I have run into multiple errors in the last few hours trying to install it, and can't seem to solve the latest one. When I run:
setup.py install
on the psycopg2 in the command console it attempts to install it, but then gives an error when trying to execute link.exe in the Visual Studio 8 folder.
This doesn't make sense to me, considering I got that executable to work when I launch it from Windows Explorer, and from the command console. I even made an environment variable for it. However, it keeps giving:
"error: command C:\Program Files(x86)\Microsoft Visual Studio 9.0\VC\BIN\link.exe" failed with exit status 1120
In case anyone goes down this rabbit hole also, make sure your pip is up-to-date:
$ pip install -U pip
$ pip install psycopg2-binary
See: http://initd.org/psycopg/docs/install.html.
That's 3 hours of my life I won't get back.
Turns out this 3 and a half hour process I've been going through was unecessary. an exe installer of psycopg2 can be downloaded from here
Had the same problem.
Image of the error message
first run
sudo apt install libpq-dev python3-dev
then
pip3 install psycopg2
Go to https://pypi.org/project/psycopg2.
In release history select the version you want to download: there will be a table with files and compatible versions of Python.
Download the binary file that matches your system configuration.
For example, for Python 3.6 on Windows 10 (64-bit) download psycopg2-2.8.6-cp36-cp36m-win_amd64.whl.

How do I install pip on Windows?

pip is a replacement for easy_install. But should I install pip using easy_install on Windows? Is there a better way?
Python 3.4+ and 2.7.9+
Good news! Python 3.4 (released March 2014) and Python 2.7.9 (released December 2014) ship with Pip. This is the best feature of any Python release. It makes the community's wealth of libraries accessible to everyone. Newbies are no longer excluded from using community libraries by the prohibitive difficulty of setup. In shipping with a package manager, Python joins Ruby, Node.js, Haskell, Perl, Go—almost every other contemporary language with a majority open-source community. Thank you, Python.
If you do find that pip is not available, simply run ensurepip.
On Windows:
py -3 -m ensurepip
Otherwise:
python3 -m ensurepip
Of course, that doesn't mean Python packaging is problem solved. The experience remains frustrating. I discuss this in the Stack Overflow question Does Python have a package/module management system?.
Python 3 ≤ 3.3 and 2 ≤ 2.7.8
Flying in the face of its 'batteries included' motto, Python ships without a package manager. To make matters worse, Pip was—until recently—ironically difficult to install.
Official instructions
Per https://pip.pypa.io/en/stable/installing/#do-i-need-to-install-pip:
Download get-pip.py, being careful to save it as a .py file rather than .txt. Then, run it from the command prompt:
python get-pip.py
You possibly need an administrator command prompt to do this. Follow Start a Command Prompt as an Administrator (Microsoft TechNet).
This installs the pip package, which (in Windows) contains ...\Scripts\pip.exe that path must be in PATH environment variable to use pip from the command line (see the second part of 'Alternative Instructions' for adding it to your PATH,
Alternative instructions
The official documentation tells users to install Pip and each of its dependencies from source. That's tedious for the experienced and prohibitively difficult for newbies.
For our sake, Christoph Gohlke prepares Windows installers (.msi) for popular Python packages. He builds installers for all Python versions, both 32 and 64 bit. You need to:
Install setuptools
Install pip
For me, this installed Pip at C:\Python27\Scripts\pip.exe. Find pip.exe on your computer, then add its folder (for example, C:\Python27\Scripts) to your path (Start / Edit environment variables). Now you should be able to run pip from the command line. Try installing a package:
pip install httpie
There you go (hopefully)! Solutions for common problems are given below:
Proxy problems
If you work in an office, you might be behind an HTTP proxy. If so, set the environment variables http_proxy and https_proxy. Most Python applications (and other free software) respect these. Example syntax:
http://proxy_url:port
http://username:password#proxy_url:port
If you're really unlucky, your proxy might be a Microsoft NTLM proxy. Free software can't cope. The only solution is to install a free software friendly proxy that forwards to the nasty proxy. http://cntlm.sourceforge.net/
Unable to find vcvarsall.bat
Python modules can be partly written in C or C++. Pip tries to compile from source. If you don't have a C/C++ compiler installed and configured, you'll see this cryptic error message.
Error: Unable to find vcvarsall.bat
You can fix that by installing a C++ compiler such as MinGW or Visual C++. Microsoft actually ships one specifically for use with Python. Or try Microsoft Visual C++ Compiler for Python 2.7.
Often though it's easier to check Christoph's site for your package.
-- Outdated -- use distribute, not setuptools as described here. --
-- Outdated #2 -- use setuptools as distribute is deprecated.
As you mentioned pip doesn't include an independent installer, but you can install it with its predecessor easy_install.
So:
Download the last pip version from here: http://pypi.python.org/pypi/pip#downloads
Uncompress it
Download the last easy installer for Windows: (download the .exe at the bottom of http://pypi.python.org/pypi/setuptools ). Install it.
copy the uncompressed pip folder content into C:\Python2x\ folder (don't copy the whole folder into it, just the content), because python command doesn't work outside C:\Python2x folder and then run: python setup.py install
Add your python C:\Python2x\Scripts to the path
You are done.
Now you can use pip install package to easily install packages as in Linux :)
2014 UPDATE:
1) If you have installed Python 3.4 or later, pip is included with Python and should already be working on your system.
2) If you are running a version below Python 3.4 or if pip was not installed with Python 3.4 for some reason, then you'd probably use pip's official installation script get-pip.py. The pip installer now grabs setuptools for you, and works regardless of architecture (32-bit or 64-bit).
The installation instructions are detailed here and involve:
To install or upgrade pip, securely download get-pip.py.
Then run the following (which may require administrator access):
python get-pip.py
To upgrade an existing setuptools (or distribute), run pip install -U setuptools
I'll leave the two sets of old instructions below for posterity.
OLD Answers:
For Windows editions of the 64 bit variety - 64-bit Windows + Python used to require a separate installation method due to ez_setup, but I've tested the new distribute method on 64-bit Windows running 32-bit Python and 64-bit Python, and you can now use the same method for all versions of Windows/Python 2.7X:
OLD Method 2 using distribute:
Download distribute - I threw mine in C:\Python27\Scripts (feel free to create a Scripts directory if it doesn't exist.
Open up a command prompt (on Windows you should check out conemu2 if you don't use PowerShell) and change (cd) to the directory you've downloaded distribute_setup.py to.
Run distribute_setup: python distribute_setup.py (This will not work if your python installation directory is not added to your path - go here for help)
Change the current directory to the Scripts directory for your Python installation (C:\Python27\Scripts) or add that directory, as well as the Python base installation directory to your %PATH% environment variable.
Install pip using the newly installed setuptools: easy_install pip
The last step will not work unless you're either in the directory easy_install.exe is located in (C:\Python27\Scripts would be the default for Python 2.7), or you have that directory added to your path.
OLD Method 1 using ez_setup:
from the setuptools page --
Download ez_setup.py and run it; it will download the appropriate .egg file and install it for you. (Currently, the provided .exe installer does not support 64-bit versions of Python for Windows, due to a distutils installer compatibility issue.
After this, you may continue with:
Add c:\Python2x\Scripts to the Windows path (replace the x in Python2x with the actual version number you have installed)
Open a new (!) DOS prompt. From there run easy_install pip
2016+ Update:
These answers are outdated or otherwise wordy and difficult.
If you've got Python 3.4+ or 2.7.9+, it will be installed by default on Windows. Otherwise, in short:
Download the pip installer:
https://bootstrap.pypa.io/get-pip.py
If paranoid, inspect file to confirm it isn't malicious
(must b64 decode).
Open a console in the download folder as Admin and run
get-pip.py. Alternatively, right-click its icon in Explorer and choose the "run as Admin...".
The new binaries pip.exe (and the deprecated easy_install.exe) will be found in the "%ProgramFiles%\PythonXX\Scripts" folder (or similar), which is often not in your PATH variable. I recommend adding it.
Python 3.4, which was released in March 2014, comes with pip included:
http://docs.python.org/3.4/whatsnew/3.4.html
So, since the release of Python 3.4, the up-to-date way to install pip on Windows is to just install Python.
The recommended way to use it is to call it as a module, especially with multiple python distributions or versions installed, to guarantee packages go to the correct place:
python -m pip install --upgrade packageXYZ
https://docs.python.org/3/installing/#work-with-multiple-versions-of-python-installed-in-parallel
When I have to use Windows, I use ActivePython, which automatically adds everything to your PATH and includes a package manager called PyPM which provides binary package management making it faster and simpler to install packages.
pip and easy_install aren't exactly the same thing, so there are some things you can get through pip but not easy_install and vice versa.
My recommendation is that you get ActivePython Community Edition and don't worry about the huge hassle of getting everything set up for Python on Windows. Then, you can just use pypm.
In case you want to use pip you have to check the PyPM option in the ActiveState installer. After installation you only need to logoff and log on again, and pip will be available on the commandline, because it is contained in the ActiveState installer PyPM option and the paths have been set by the installer for you already. PyPM will also be available, but you do not have to use it.
The up-to-date way is to use Windows' package manager Chocolatey.
Once this is installed, all you have to do is open a command prompt and run the following the three commands below, which will install Python 2.7, easy_install and pip. It will automatically detect whether you're on x64 or x86 Windows.
cinst python
cinst easy.install
cinst pip
All of the other Python packages on the Chocolatey Gallery can be found here.
Update March 2015
Python 2.7.9 and later (on the Python 2 series), and Python 3.4 and later include pip by default, so you may have pip already.
If you don't, run this one line command on your prompt (which may require administrator access):
python -c "exec('try: from urllib2 import urlopen \nexcept: from urllib.request import urlopen');f=urlopen('https://bootstrap.pypa.io/get-pip.py').read();exec(f)"
It will install pip. If Setuptools is not already installed, get-pip.py will install it for you too.
As mentioned in comments, the above command will download code from the Pip source code repository at GitHub, and dynamically run it at your environment. So be noticed that this is a shortcut of the steps download, inspect and run, all with a single command using Python itself. If you trust Pip, proceed without doubt.
Be sure that your Windows environment variable PATH includes Python's folders (for Python 2.7.x default install: C:\Python27 and C:\Python27\Scripts, for Python 3.3x: C:\Python33 and C:\Python33\Scripts, and so on).
Installers
I've built Windows installers for both distribute and pip here (the goal being to use pip without having to either bootstrap with easy_install or save and run Python scripts):
distribute-0.6.27.win32.exe
pip-1.1.win32.exe
On Windows, simply download and install first distribute, then pip from the above links. The distribute link above does contain stub .exe installers, and these are currently 32-bit only. I haven't tested the effect on 64-bit Windows.
Building on Windows
The process to redo this for new versions is not difficult, and I've included it here for reference.
Building distribute
In order to get the stub .exe files, you need to have a Visual C++ compiler (it is apparently compilable with MinGW as well)
hg clone https://bitbucket.org/tarek/distribute
cd distribute
hg checkout 0.6.27
rem optionally, comment out tag_build and tag_svn_revision in setup.cfg
msvc-build-launcher.cmd
python setup.py bdist_win32
cd ..
echo build is in distribute\dist
Building pip
git clone https://github.com/pypa/pip.git
cd pip
git checkout 1.1
python setup.py bdist_win32
cd ..
echo build is in pip\dist
The following works for Python 2.7. Save this script and launch it:
https://raw.github.com/pypa/pip/master/contrib/get-pip.py
Pip is installed, then add the path to your environment :
C:\Python27\Scripts
Finally
pip install virtualenv
Also you need Microsoft Visual C++ 2008 Express to get the good compiler and avoid these kind of messages when installing packages:
error: Unable to find vcvarsall.bat
If you have a 64-bit version of Windows 7, you may read 64-bit Python installation issues on 64-bit Windows 7 to successfully install the Python executable package (issue with registry entries).
For the latest Python download - I have Python 3.6 on Windows. You don't have to wonder. Everything you need is there. Take a breath, and I will show you how to do it.
Make sure where you install Python. For me, it was in the following directory
Now, let’s add the Python and pip into environment variable path settings
if you are on Windows, so that typing pip or python anywhere call
python or pip from where they are installed.
So, PIP is found under the folder in the above screen "SCRIPTS"
Let's add Python and PIP in the environment variable path.
Almost done. Let's test with CMD to install the google package using pip.
pip install google
To install pip globally on Python 2.x, easy_install appears to be the best solution as Adrián states.
However the installation instructions for pip recommend using virtualenv since every virtualenv has pip installed in it automatically. This does not require root access or modify your system Python installation.
Installing virtualenv still requires easy_install though.
2018 update:
Python 3.3+ now includes the venv module for easily creating virtual environments like so:
python3 -m venv /path/to/new/virtual/environment
See documentation for different platform methods of activating the environment after creation, but typically one of:
$ source <venv>/bin/activate
C:\> <venv>\Scripts\activate.bat
To use pip, it is not mandatory that you need to install pip in the system directly. You can use it through virtualenv. What you can do is follow these steps:
Download virtualenv tar.gz file from https://pypi.python.org/pypi/virtualenv
Unzip it with 7zip or some other tool
We normally need to install Python packages for one particular project. So, now create a project folder, let’s say myproject.
Copy the virtualenv.py file from the decompressed folder of virtualenv, and paste inside the myproject folder
Now create a virtual environment, let’s say myvirtualenv as follows, inside the myproject folder:
python virtualenv.py myvirtualenv
It will show you:
New python executable in myvirtualenv\Scripts\python.exe
Installing setuptools....................................done.
Installing pip.........................done.
Now your virtual environment, myvirtualenv, is created inside your project folder. You might notice, pip is now installed inside you virtual environment. All you need to do is activate the virtual environment with the following command.
myvirtualenv\Scripts\activate
You will see the following at the command prompt:
(myvirtualenv) PATH\TO\YOUR\PROJECT\FOLDER>pip install package_name
Now you can start using pip, but make sure you have activated the virtualenv looking at the left of your prompt.
This is one of the easiest way to install pip i.e. inside virtual environment, but you need to have virtualenv.py file with you.
For more ways to install pip/virtualenv/virtualenvwrapper, you can refer to thegauraw.tumblr.com.
Updated at 2016 : Pip should already be included in Python 2.7.9+ or 3.4+, but if for whatever reason it is not there, you can use the following one-liner.
Download https://bootstrap.pypa.io/get-pip.py and run it with Administrator permission python get-pip.py (If you are on Linux, use sudo python get-pip.py)
PS:
This should already be satisfied in most cases but, if necessary, be sure that your environment variable PATH includes Python's folders (for example, Python 2.7.x on Windows default install: C:\Python27 and C:\Python27\Scripts, for Python 3.3x: C:\Python33 and C:\Python33\Scripts, etc)
I encounter same problem and then found such perhaps easiest way (one liner!) mentioned on official website here: http://www.pip-installer.org/en/latest/installing.html
Can't believe there are so many lengthy (perhaps outdated?) answers out there. Feeling thankful to them but, please up-vote this short answer to help more new comers!
I just wanted to add one more solution for those having issues installing setuptools from Windows 64-bit. The issue is discussed in this bug on python.org and is still unresolved as of the date of this comment. A simple workaround is mentioned and it works flawlessly. One registry change did the trick for me.
Link: http://bugs.python.org/issue6792#
Solution that worked for me...:
Add this registry setting for 2.6+ versions of Python:
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Python\PythonCore\2.6\InstallPath]
#="C:\\Python26\\"
This is most likely the registry setting you will already have for Python 2.6+:
[HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\InstallPath]
#="C:\\Python26\\"
Clearly, you will need to replace the 2.6 version with whatever version of Python you are running.
The best way I found so far, is just two lines of code:
curl http://python-distribute.org/distribute_setup.py | python
curl https://raw.github.com/pypa/pip/master/contrib/get-pip.py | python
It was tested on Windows 8 with PowerShell, Cmd, and Git Bash (MinGW).
And you probably want to add the path to your environment. It's somewhere like C:\Python33\Scripts.
PythonXY comes with pip included, among others.
I use the cross-platform Anaconda package manager from continuum.io on Windows and it is reliable. It has virtual environment management and a fully featured shell with common utilities (e.g. conda, pip).
> conda install <package> # access distributed binaries
> pip install <package> # access PyPI packages
conda also comes with binaries for libraries with non-Python dependencies, e.g. pandas, numpy, etc. This proves useful particularly on Windows as it can be hard to correctly compile C dependencies.
Here how to install pip the easy way.
Copy and paste this content in a file as get-pip.py.
Copy and paste get-pip.py into the Python folder.C:\Python27.
Double click on get-pip.py file. It will install pip on your computer.
Now you have to add C:\Python27\Scripts path to your environment variable. Because it includes the pip.exe file.
Now you are ready to use pip. Open cmd and type as pip install package_name
I had some issues installing in different ways when I followed instructions here. I think it's very tricky to install in every Windows environment in the same way. In my case I need Python 2.6, 2.7 and 3.3 in the same machine for different purposes so that's why I think there're more problems.
But the following instructions worked perfectly for me, so might be depending on your environment you should try this one:
http://docs.python-guide.org/en/latest/starting/install/win/
Also, due to the different environments I found incredible useful to use Virtual Environments, I had websites that use different libraries and it's much better to encapsulate them into a single folder, check out the instructions, briefly if PIP is installed you just install VirtualEnv:
pip install virtualenv
Into the folder you have all your files run
virtualenv venv
And seconds later you have a virtual environment with everything in venv folder, to activate it run venv/Scripts/activate.bat (deactivate the environment is easy, use deactivate.bat). Every library you install will end up in venv\Lib\site-packages and it's easy to move your whole environment somewhere.
The only downside I found is some code editors can't recognize this kind of environments, and you will see warnings in your code because imported libraries are not found. Of course there're tricky ways to do it but it would be nice editors keep in mind Virtual Environments are very normal nowadays.
Hope it helps.
Download script: https://raw.github.com/pypa/pip/master/contrib/get-pip.py
Save it on drive somewhere like C:\pip-script\get-pip.py
Navigate to that path from command prompt and run " python get-pip.py "
Guide link: http://www.pip-installer.org/en/latest/installing.html#install-pip
Note: Make sure scripts path like this (C:\Python27\Scripts) is added int %PATH% environment variable as well.
It's very simple:
Step 1: wget https://bitbucket.org/pypa/setuptools/raw/bootstrap/ez_setup.py
Step 2: wget https://raw.github.com/pypa/pip/master/contrib/get-pip.py
Step 2: python ez_setup.py
Step 3: python get-pip.py
(Make sure your Python and Python script directory (for example, C:\Python27 and C:\Python27\Scripts) are in the PATH.)
Working as of Feb 04 2014 :):
If you have tried installing pip through the Windows installer file from http://www.lfd.uci.edu/~gohlke/pythonlibs/#pip as suggested by #Colonel Panic, you might have installed the pip package manager successfully, but you might be unable to install any packages with pip. You might also have got the same SSL error as I got when I tried to install Beautiful Soup 4 if you look in the pip.log file:
Downloading/unpacking beautifulsoup4
Getting page https://pypi.python.org/simple/beautifulsoup4/
Could not fetch URL https://pypi.python.org/simple/beautifulsoup4/: **connection error: [Errno 1] _ssl.c:504: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed**
Will skip URL https://pypi.python.org/simple/beautifulsoup4/ when looking for download links for beautifulsoup4
The problem is an issue with an old version of OpenSSL being incompatible with pip 1.3.1 and above versions. The easy workaround for now, is to install pip 1.2.1, which does not require SSL:
Installing Pip on Windows:
Download pip 1.2.1 from https://pypi.python.org/packages/source/p/pip/pip-1.2.1.tar.gz
Extract the pip-1.2.1.tar.gz file
Change directory to the extracted folder: cd <path to extracted folder>/pip-1.2.1
Run python setup.py install
Now make sure C:\Python27\Scripts is in PATH because pip is installed in the C:\Python27\Scripts directory unlike C:\Python27\Lib\site-packages where Python packages are normally installed
Now try to install any package using pip.
For example, to install the requests package using pip, run this from cmd:
pip install requests
Whola! requests will be successfully installed and you will get a success message.
Simple CMD way
Use CURL to download get-pip.py:
curl --http1.1 https://bootstrap.pypa.io/get-pip.py --output get-pip.py
Execute the downloaded Python file
python get-pip.py
Then add C:\Python37\Scripts path to your environment variable. It assumes that there is a Python37 folder in your C drive. That folder name may vary according to the installed Python version
Now you can install Python packages by running
pip install awesome_package_name
Installing Pip for Python 2 and Python 3
Download get-pip.py to a folder on your computer.
Open a command prompt and navigate to the folder containing get-pip.py.
Run the following command:python get-pip.py, python3 get-pip.py or python3.6 get-pip.py, depending on which version of Python you want to install pip
Pip should be now installed!
Old answer (still valid)
Try:
python -m ensurepip
It's probably the easiest way to install pip on any system.
If you even have other problems with the pip version, you can try this:
pip install --trusted-host pypi.python.org --upgrade pip
pip is already installed if you're using Python 2 >= 2.7.9 or Python 3 >= 3.4 binaries downloaded from python.org, but you'll need to upgrade pip.
On Windows, the upgrade can be done easily:
Go to a Python command line and run the below Python command
python -m pip install -U pip
Installing with get-pip.py
Download get-pip.py in the same folder or any other folder of your choice. I am assuming you will download it in the same folder from where you have the python.exe file and run this command:
python get-pip.py
Pip's installation guide is pretty clean and simple.
Using this, you should be able to get started with Pip in under two minutes.
Now, it is bundled with Python. You don't need to install it.
pip -V
This is how you can check whether pip is installed or not.
In rare cases, if it is not installed, download the get-pip.py file and run it with Python as
python get-pip.py
I think the question makes it seem like the answer is simpler than it really is.
Running of pip will sometimes require native compilation of a module (64-bit NumPy is a common example of that). In order for pip's compilation to succeed, you need Python which was compiled with the same version of Microsoft Visual C++ as the one pip is using.
Standard Python distributions are compiled with Microsoft Visual C++ 2008. You can install an Express version of Microsoft Visual C++ 2008, but it is not maintained. Your best bet is to get an express version of a later Microsoft Visual C++ and compile Python. Then PIP and Python will be using the same Microsoft Visual C++ version.
Just download setuptools-15.2.zip (md5), from here https://pypi.python.org/pypi/setuptools#windows-simplified , and run ez_setup.py.

Resources