I'm trying to run gitk on Windows but the console gives me:
'gitk' is not recognized as an internal or external command,
operable program or batch file.
But then, I can do
> where gitk
C:\Program Files (x86)\Git\bin\gitk
How comes?
UPDATE: Stealing the OP's comment:
Thanks for a (lengthy) explanation, the easiest fix for me was to move from the old msysGit (1.9.5) version to the newer "Git for Windows" builds which has a proper Windows wrapper for gitk.
gitk, unlike most git commands, is a shell script that invokes Tcl.
If you examine the gitk executable file itself, its first few lines are:
#!/bin/sh
# Tcl ignores the next line -*- tcl -*- \
exec wish "$0" -- "$#"
(At least that's what it looks like on my Linux system; the Windows installer for gitk might change that.)
On a Unix-like system, that first line, known as a "shebang", tells the system to invoke /bin/sh to execute the file rather than executing it directly.
The third line executes the wish command, which executes the script as a Tcl script.
If you have Tcl installed on your Windows system, you should be able to run gitk as a Tcl script using something like this:
C:\> tclsh "C:\Program Files (x86)\Git\bin\gitk"
(Disclaimer: I have not tried this.)
You might also be able to change the command's name from gitk to gitk.tcl and set up a file association in Windows so it will be invoked correctly. (I'm a little surprised that the Windows git installer didn't do this for you.)
More information on running Tcl scripts on Windows can be found here.
And this question discusses invoking gitk on Windows from the context menu rather than from the command line.
Related
I am running on Windows 7.
I have a bash script which runs fine from a Windows command prompt using "C:\Program Files\Git\git-cmd.exe" "C:\path\myBashScript.sh" 17.1. I can see it running in a new bash window, the output looks fine and it closes. What I want to do is capture the output in a file for further processing.
I tried
"C:\Program Files\Git\git-cmd.exe" "C:\path\myBashScript.sh" 17.1 > C:\out\myBashScript.out.txt
but all I get in the output is the working folder, ie,
C:\path>
Is this possible?
Thanks
"C:\Program Files\Git\git-cmd.exe" is a frontend windows launcher. I'm surprised it takes any argument at all. You should run bash scripts using bash interpreter:
"C:\Program Files\Git\bin\bash.exe" "C:\path\myBashScript.sh"
PS: I'd advise to apply redirection inside the bash script rather than in windows commandline, they are better controlled there.
You need to discriminate between the outputs generated within the shell script, and those generated by the command line execution.
To easily capture the output of the shell script, you may find it easier to do the redirection > to the capture file within the script.
You didn't say what style of system you were on, and how it was set up (Cygwin, GfW; command line in cmd.exe, or bash; integrated or separated git commands (in the cmd.exe), etc). I suspect that the inability to do a simple redirection of the command line is because of that system setup issue.
I installed amazonCLI, as well as Cygwin, and changed the Path env variable to:
%SystemRoot%\System32\Wbem;C:\Program Files\Prio;C:\Program
Files\Diskeeper Corporation\ExpressCache\;C:\Program
Files\Amazon\AWSCLI\;C:\cygwin64\bin
When I open the command prompt, first of all it is directly pointing to
C:\Users\Stephane
(which I think is weird). And then when I input something like 'ls', the return error is:
'ls' is not recognized as internal or external command, operable program or batch file
Can you please help me know what I am doing wrong?
Thanks
From the error message you got, it's evident, that you are trying to execute Cygwin's commands from the Windows Console. That's also the reason, why it's executed in your Windows' profile directory instead of the Cygwin's one.
You should read the basics about using the Cygwin first, because it seems you don't know what Cygwin exactly is and how to use it. Maybe you don't need the Cygwin at all, it depends on what you need to accomplish. The is for example GnuWin tool set or UnxUtils, which are just a sets of standalone GNU tools compiled for Windows. Cygwin is more like system than standalone utilities. You can for example execute shell scripts under the Cygwin.
So it depends on your needs. But I simply can't imagine using Windows without Cygwin yet.
You can execute Cygwin's shell from the Windows Console, but I advice you to use MinTTY (which is in directory $CYGWIN_DIR/bin). MinTTY is a terminal emulator, which executes your Cygwin shell (bash by default).
To execute for example bash directly from the Windows Console, just execute $CYGWIN_DIR/bash.exe --login -i.
I have a simple bash script that throw errors on a Windows machine in the Cygwin xterm terminal when I call it like so: ./myscript.bat. It runs fine when I call it like this: /cygdrive/c/cygwin/bin/bash.exe myscript.bat. I am thinking that my shell is not using bash by default. How can I set it to bash so that the next time I open the shell, I can execute my script using ./myscript.bat?
When you execute a file, Windows (or some component within Windows) decides how to execute it based on the extension part of the file name.
Cygwin inherits this functionality, letting you run Windows commands from within Cygwin. Cygwin also implements most of the usual UNIX functionality (running commands based on their content), but the combination of UNIX and Windows semantics can't always be perfectly clean.
The .bat suffix refers to a Windows batch file, so when you try to execute myscript.bat, the system treats it that way rather than as a bash script.
Change the file name from myscript.bat to myscript.bash or myscript.sh -- or just drop the extension altogether (since someone running your script shouldn't need to care how it's written).
There are several other filename extensions you should avoid (like .cmd), depending on how Windows is configured. A few quick experiments show that a .sh extension is safe, but really you don't need to use an extension at all for a shell script.
And, as R Sahu's answer says, you also need to make sure the script has execute permission if you haven't already done so:
mv myscript.bat myscript
chmod +x myscript
You'll probably need to change permissions of the file to make it an executable.
Try
chmod +x myscript.bat
./myscript.bat
I have made a few python scripts, but is there an easier way to run them? I am using cygwin.
python "C:\Users\Desk\Dropbox\scripts\wsort.py" > data11414_unsorted.txt < data11414_sorted.txt
I want something like this (not typing the path name or "python"):
wsort > data11414_unsorted.txt < data11414_sorted.txt
where wsort is a link to my real wsort.py
Add a
Shebang
to the script
#!/bin/python
then invoke like this
wsort.py > data11414_unsorted.txt < data11414_sorted.txt
First, your question has a Windows-style path (backslashes, beginning with C:) rather than a Cygwin path (/cygdrive/c/Users/Desk/Dropbox/scripts/wsort.py). That implies you're not actually using Cygwin, or if you are, you're ignoring a bunch of warnings.
The below assumes you're using Cygwin Bash (which should be what you get if you start Cygwin Terminal from the Start Menu) and Cygwin Python (which you've installed using Cygwin's setup.exe, not a Windows Python installer). If your not, you're making life more difficult for yourself than you need to.
That out the way, there's a bunch of steps you need to take:
First, make the script executable. Use the chmod command for that, from a Cygwin Bash shell:
chmod +x /cygdrive/c/Users/Desk/Dropbox/scripts/wsort.py
Second, tell the system how to execute it. Add the following line to the top of the script:
#!/bin/python
(That's a "shebang". Python sees it as a comment, so doesn't do anything with it, but Cygwin and other Linux-like systems will use that line to see which program to run the script with. In this case, Python.)
Third, make sure your line endings are correct. Cygwin expects Linux line endings and will fail without them. This may not be a problem, but there's no harm in doing this. Run the following command:
dos2unix /cygdrive/c/Users/Desk/Dropbox/scripts/wsort.py
At this point, you'll be able to call the script by specifying the full path to it in Cygwin. You can't yet run it without specifying where the script is explicitly.
The fourth step is making sure the script is "in your path", ie in one of the folders where Cygwin looks for scripts to run. There are lots of ways to do this, but the most sensible is probably to just add your scripts directory to your path. The following command will add your scripts directory to your path whenever you start a new Cygwin session:
echo 'PATH="/cygdrive/c/Users/Desk/Dropbox/scripts:$PATH"' >>~/.bashrc
You will need to restart your Cygwin terminal for that to take effect, however.
At that point, you'll be able to run the script in Cygwin just by typing wsort.py (and thus use it with redirections and so forth as in your question).
Finally, to be able to call it simply as wsort, there's a number of options. The obvious one is just renaming the file. More usefully (and without copying the file or doing anything liable to break with Dropbox syncing things), try creating an alias:
echo 'alias wsort=wsort.py' >>~/.bashrc
Again, you'll need to restart your Cygwin terminal for that to take effect.
Maybe use an alias ?
alias wsort = "Command_Used"
Im trying to automatically run a script using Cygwin via CMD. I basically created a BAT file that goes to the directory and executes an .SH file. SH files are accosiated with Cygwin, and I tried something like "cygwin update.sh" in the command line. But all it really does is open Cygwin. I want Cygwin to automatically run the script file. Is there any easy way to do this, I've been trying to find but can't. Thank you!
You'll want to call the shell script with a particular shell, e.g. bash.
When having Cygwin open, call which bash to figure out where the binary is located. Cygwin also comes with tools that can convert paths between Cygwin and Win32 form, which is pretty helpful in cases like yours.
There is one other thing that may work, depending on your setup. There is an environment variable named PATHEXT which declares file extensions that are deemed "executable" by CMD. This can be used to your advantage, if Windows is configured so that the shell's "open" verb executes the correct shell for the file extension .sh (in your case).
Good luck.
From Cygwin Terminal, read man mintty. Try something like the following from a Windows Command Prompt:
c:\cygwin\bin\mintty --hold always --exec /cygdrive/c/path/to/bash/script.sh
I also found this!
http://rothmanshore.com/2011/01/26/kick-off-a-cygwin-script-from-a-windows-bat-file-with-a-different-working-directory/
I didn't quite understand it at first, but then it worked as I wanted it. Just if anyone knows, is there a way to make the script run without the CMD window open?? Thanks