I've just updated firefox to a Firefox 51.0.1 (32-bit), and after the update console.log stopped working.
When I am tring to test some JavaScript variables using console.log(), it doesn't output anything.
As I mentioned in another answer, this happens because the Firefox internal APIs, which Firebug uses to output the data, have changed.
When you open the Browser Console, you'll see the following error:
TypeError: ConsoleAPIListener is not a constructor console.js:149:38
Note that, as stated in a thread in the Firebug discussion group and on the Firebug homepage, Firebug is discontinued and unmaintained.
I.e. it breaks more and more with every new version of Firefox and will quit working completely once multi-process Firefox is enabled. There is a blog post explaining the reasons.
The team behind Firebug advises to use the Firefox DevTools instead and there is a migration guide available.
In 2 steps:
disable or (better) uninstall Firebug
press F12 and enjoy the console and other Devtools
Why: Firebug is not regularly updated anymore, it often becomes obsolete with new FF update. Tools already available in Firefox (F12) are inglobating it.
I am using Firefox 50.0. After auto update of Firefox to version 50.0, Firebug has stopped working and attempting to use it is showing an inbuilt Firefox console while inspecting any DOM element.
Is there any patch to use Firebug on Firefox 50.0 version?
Solve The problem by Changing Mozilla Browser Configuration Settings.
Open A Blank Tab
type about:config in address bar then press enter (click on I accept the risk!)
find browser.tabs.remote.autostart
select the option then click the mouse right side
Turn The Option As False
Close the browser for restart browser
open browser again, inspect the element. I hope It Works Properly.
I manage to get Firebug work again, so here is what I done.
Everyone knows that Firebug isn't being developed or maintained any longer because it can't work with e10s, so here is my workaround:
Download Firefox Developer edition so you can allow XPI installation.
firefox-53.0a2.en-US.win64.installer.exe or
firefox-53.0a2.en-US.win32.installer.exe
Run Firefox developer edition after installing and go to the about:config (type in url bar)
Find xpinstall.signatures.required (set to false)
Find browser.tabs.remote.autostart (set all to false: browser.tabs.remote.autostart.1 and browser.tabs.remote.autostart.2)
NOTE: The Multi-process architecture improves the browser's stability, performance and security by separating tasks into processes, you disabling it at own responsibility.
After that you need to restart the browser.
Now you can go at the Firebug repository and install desired version
Here you can find all Firebug installations
I chose latest firebug-2.0b8.xpi and it forking fine.
P.S. You can disable updates for Firefox Developer edition.
Hope it helps.
Head over to Firebug website, you can see following message:
The Firebug extension isn't being developed or maintained any longer. We invite you to use the Firefox built-in DevTools instead.
Also Sebastianz told me,
Firebug is discontinued. The team has split up, the former team leader Jan "Honza" Odvarko is working on the Firefox DevTools now.
As #Makyen said in his answer, Firebug does not work with multiprocess Firefox, so remove Firebug right now and try Firefox DevTools instead, it's not optional (sadly), unless you don't update Firefox :)
Update 1
Take a look # Why got Firebug removed after updating Firefox to version 50?
Update 2
Take a look # my answer here: how to revert firebug to old version
Firebug does not work with multiprocess Firefox
The Firebug site claims that:
Firebug 2.0.18 is compatible with Firefox 30 – 52
However, it also explains that [emphasis mine]:
Firebug 2.0.18 fixes issue 8030. The extension is marked as multi-process (e10s) compatible so, it isn’t blacklisted and users can continue installing it. This way Firebug can help users to easily migrate into built-in Firefox developer tools – in case it’s running in multi-process enabled browser. When opened in a multi-process Firefox, Firebug’s tools cannot be used. Firebug will then only assist the user with migration to Firefox’s built-in tools.
They also direct you to read: Unifying Firebug & Firefox DevTools
That page says that [emphasis mine]:
Firebug 2 doesn’t work in multi-process browsers (i.e. e10s) and converting it is too complex, so it will stop working when e10s is activated in Firefox. You will be able to disable e10s for a while to keep using Firebug 2, but this won’t last forever.
The fact that Firebug does not actually work in multiprocess Firefox will account for different people having different experiences with Firebug working or not working in a particular version of Firefox. Firefox automatically enabling multiprocess mode will depend on multiple factors, including what other add-ons are installed in the profile.
Using Firebug in newer versions of Firefox
Thus, to use Firebug in newer versions of Firefox, you will need to disable Firefox from entering multiprocess mode. This can be done from the about:preferences page (also available from Tools➞Options). This an option which is under the "General" tab as "Enable multi-process Firefox ...". If multiprocess is not available, this option will not be shown. This option can also be changed by adjusting the preference browser.tabs.remote.autostart from about:config. [Note: browser.tabs.remote.autostart.2 and browser.tabs.remote.autostart.1 also appear to be used to indicate default states, thus I suggest using the about:preferences page to change this option.]
You can determine if your Firefox is currently running in multiprocess mode by looking in about:support. The line "Multiprocess Windows" under "Application Basics" will state if multiprocess is enabled or disabled.
Set up profiles explicitly for testing
Personally, I have different profiles set up for each of multiprocess explicitly disabled and multiprocess explicitly enabled (set browser.tabs.remote.force-enable to true), so I can perform testing under both conditions, with the state of multiprocess being enabled/disabled being known in advance.
I had the same problem when I updated Firefox. I was so addicted to firebug but I moved on to Firefox developer edition - https://www.mozilla.org/en-US/firefox/developer/
It also comes with the firebug theme which resembles firebug UI and its efficient.Just install FDE and activate the firebug theme as shown in the image below :
I had the same unexpected surprise when ubuntu updated FFX and suddenly things like the script panel stopped working. Since I was in the middle of working on something with a short deadline, I was not going to have the luxury of learning the firefox developer toolset and desperately needed to get firebug working. The fix that finally worked for me was to set Firefox preferences not to update. Then download v 49.0.2
https://support.mozilla.org/en-US/kb/install-older-version-of-firefox
I also had to tell Ubuntu not to include firefox in it's upgrades.
It looks like firebug will no longer be maintained as a seperate project, so you will want to get familiar w/ the built in dev tools, but hopefully this buys you some time. Worth mentioning (if I'm reading this right, it sounds like it will be integrated into the native tools:
https://blog.getfirebug.com/2016/06/07/unifying-firebug-firefox-devtools/
https://github.com/firebug/firebug.next
Its working. You need to install one more add-on "Firepicker" and restart the Firefox.
https://addons.mozilla.org/en-US/firefox/addon/firepicker/
I managed to resolve this issue by simply downgrading to mozilla old version using this url:
open https://ftp.mozilla.org/pub/firefox/releases/50.0/win64/en-US/
download and run the .exe setup
Go to Settings - > Add Ons
Click on extensions and search for firebug and firepath and then add those extensions
Hope this should resolve the issue. For those using Windows 32 machine can use the url
https://ftp.mozilla.org/pub/firefox/releases/50.0/win32/en-US/
http://toolsqa.com/selenium-webdriver/xpath-helper/
Open a new tab and navigate to any webpage. I have used www.DemoQA.com for demo.
Hit Ctrl-Shift-X (or Command-Shift-X on OS X), or click the XPath Helper button in the toolbar, to open the XPath Helper console.
Hold down Shift as you mouse over elements on the page. The query box will continuously update to show the XPath query for the element below the mouse pointer, and the results box will show the results for the current query.
If desired, edit the XPath query directly in the console. The results box will immediately reflect your changes.
Repeat step (2) to close the console.
After updating Firefox to version 50.0 my Firebug opens the default developer tools. The original Firebug doesn't work anymore.
I have always preferred Firebug as my default debugging tool. I want the original Firebug back in Firefox 50. How can I do that?
Firebug does not work anymore once multi-process Firefox (separate processes for the Firefox UI and the websites) is enabled. See the related post in the Firebug blog.
You may be able to reenable Firebug by setting the preferences browser.tabs.remote.autostart, browser.tabs.remote.autostart.1 and browser.tabs.remote.autostart.2 to false via about:config. Though at some point this preference will be removed.
So, you are advised to use the Firefox DevTools instead. I am writing a migration guide on MDN. Firebug features that are not in the DevTools are covered in a Firefox bug.
First remove new version of "firebug" and download old version of "Firebug(2.0.17)" from following URL:
https://addons.mozilla.org/en-US/firefox/addon/firebug/versions/
Uninstall Firefox completely including deleting the Mozilla folder within your APPDATA.
Then reinstall Firefox and add both Firebug and FireQuery.
After that everything should work as before.
You can also go on Help -> Troubleshooting Information -> Refresh Firefox and install Firebug through http://addons.mozilla.org/
For all the folks out there, there is a good news..!! Firebug works great on these two Mozilla based browsers.
Cyberfox & Palemoon
Both are forks of forefox that uses code before the implementation multi-process. Cyberfox uses the more recent code fork compared to Palemoon.
Both browsers are well maintained and updated regularly.
Cyberfox announced its death on March 2017 but its still actively maintained [as of Dec 2017] and I still get update.
Both browsers support cross platform windows / Linux, on Linux you should have 64 bit distro to use cyberfox. Palemoon on the other hand works great on both the bits.
Every time my firefox updates my tests don't run and give an error like "version of this program has been updated".I don't want to set firefox tools to "Never check for updates" because newer versions run well on my computer.How to solve it?
Web driver is usually updated when a new version of Firefox is updated. You really have no option other than to stop Firefox updating, and then manually doing it when web driver is released.
With the latest versions : Intellij 13 or Webstorm 8.
It's cool to be able to debug the code in the IDE. But Chrome dev tools brings search in the DOM / inspect element which is lost when debugging in the IDE.
Actually the IDE debug session stops as soon as the chrome dev tools are open.
IS it possible to avoid that?
Thanks :)
No:( Unfortunately the javascript debugger in WebStorm/Idea can't co-exist with Chrome dev tools. It's Chrome problem that can't be solved on JetBrains side. Please vote for http://code.google.com/p/chromium/issues/detail?id=129539
If you prefer using chrome dev tools you can always open up 2 x chrome browser sessions and use one for the live edit connection to the jetbrains ide, and the other session to inspect elements etc.
As of Chrome 63 this is now possible.