I have installed RabbitMQ server on my windows 7 machine.
I am not able to stop the service by running this command in rabbitmq command line rabbitmq-server.bat -detached and rabbitmq-service.bat stop
I am getting the following errors in console :
C:\Program Files (x86)\RabbitMQ Server\rabbitmq_server-3.5.4\sbin>rabbitmq-serve
r.bat -detached
ERROR: node with name "rabbit" already running on "MYPC"
C:\Program Files (x86)\RabbitMQ Server\rabbitmq_server-3.5.4\sbin>rabbitmq- servi
ce.bat stop
C:\Program Files\erl7.0\erts-7.0\bin\erlsrv: Failed to stop service RabbitMQ.
Error: The operation completed successfully.
You have to stop and to restart the Windows services.
For windows
Open Rabbitmq cmd shell and type the following
rabbitmq-plugins disable rabbitmq_management
The other answers appear to all be for when RabbitMQ is installed as a service.
If one is running RabbitMQ via rabbitmq-server.bat -detached, the command for shutting it down is rabbitmqctl.bat shutdown 🙂
Try following commands
rabbitmq-service.bat stop
rabbitmq-service.bat install
rabbitmq-service.bat start
Related
I uninstalled rabbitMq using this guide: https://support.bioconnect.com/hc/en-us/articles/115011178868-How-to-Uninstall-RabbitMQ
uninstalled RabbitMq and Erlang
ended empd.exe in task manager
deleted the directories for rabbitMQ and erlang
deleted HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Ericsson from 'regedit'
removed the service from services
I also deleted the C:\Windows.erlang.cookie and C:\Users[username]/.erlang.cookie.
After I tried reinstalling using this other guide: https://cmatskas.com/getting-started-with-rabbitmq-on-windows/
installed Erlang
downloaded and installed rabbitMQ
Navigate to the sbin directory of the RabbitMQ Server installation directory. 'C:\Program Files (x86)\RabbitMQ Server\rabbitmq_server-3.3.4\sbin'
and ran 'rabbitmq-plugins.bat enable rabbitmq_management'
I navigated to http://localhost:15672/ and the site was unreachable. I opened up services to make sure that the rabbitMq service was on and it was not even created. I tried running the command 'rabbitmq-service install' as admin and got the following back
RabbitMQ service is already present - only updating service parameters
C:\Program Files\erl9.2\erts-9.2\bin\erlsrv: Warning, could not set correct interactive mode. RabbitMQ
Error: The handle is invalid.
C:\Program Files\erl9.2\erts-9.2\bin\erlsrv: Warning, could not set correct service description (comment) RabbitMQError: The handle is invalid.
I am wondering if i missed a step somewhere. Cant get rabbit to work.
I also ran into this problem recently.
These simple steps solved the issue for me:
Open Regedit.exe
Browse to HKEY_LOCAL_MACHINE\SOFTWARE\Ericsson\Erlang\ErlSrv\1.1\RabbitMQ
Remove that key
Now running rabbitmq-service.bat install is successful.
Try to remove the service and reinstall it using the following steps:
Open CMD as administrator and navigate to the sbin folder (Mine is C:\Program Files\RabbitMQ Server\rabbitmq_server-3.7.4\sbin)
Remove RabbitMQ service by:
rabbitmq-service.bat remove
Reinstall it by:
rabbitmq-service.bat install
Start the service by:
rabbimq-service.bat start
I'm receiving the following error in docker on windows 10 laptop.
I've try to reinstall and restart but nothing helps.
The docker service is running OK but what i understand that i have a problem with the docker daemon (from what i read)
The whole issue started when i run the 2 commands:
net stop com.docker.service
net start com.docker.service
from there on i keep getting the error below and cannot solve it.
C:\Users\xxxx>docker images error during connect: Get
http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.30/images/json: open
//./pipe/docker_engine: The system cannot find the file specified. In
the default daemon configuration on Windows, the docker client must be
run elevated to connect. This error may also indicate that the docker
daemon is not running.
anyone succeed to solve it?
docker client must be run elevated to connect
This indicates that you do not have enough permissions. Try starting the terminal as administrator.
I run Docker remotely as a non admin user.
For this the user running docker should have full permission to location where Docker is installed.
User should be part of docker_users group
docker daemon runs on port 2375 by default. Try to whitelist this port. Allow incoming connections to 2375 in Windows Firewall settings
Restart your docker daemon and Docker service.
Restart the running Docker instance[Docker for Windows] if required. You do not have to reinstall.
I am trying download and create a queque but I have problem. This is my list what I am doing:
I download erlang http://www.erlang.org/downloads (for windows x64)
I download rabbitmq https://www.rabbitmq.com/install-windows.html (for windows )
I install erlang and next install rabbimq
I write rabbitmq-plugins.bat enable rabbitmq_management in console and I have:
C:\Program Files\RabbitMQ Server\rabbitmq_server-3.6.0\sbin>rabbitmq-plugins.bat enable rabbitmq_management Plugin configuration unchanged.
Applying plugin configuration to rabbit#----... failed.
- Could not contact node rabbit#----. Changes will take effect at broker restart.
- Options: --online - fail if broker cannot be contacted.
--offline - do not try to contact broker.
So i write in consol "sc query rabbitmq" and I have :
[SC] EnumQueryServicesStatus:OpenService FAILED 1060:
The specified service does not exist as an installed service.
I know that rabbit is started by the process C:\Program Files\erl7.0\erts-7.0\bin\erlsrv.exe but I have this process so erlang was install correctly. I find people who have similar problem but they only "restart the RabbitMQ service and then try again" but I can't do this because my service does not exist.
Please give me some advice.
Ok I know. In console I am writing:
rabbitmq-plugins.bat enable rabbitmq_management
rabbitmq-server start
and RabbitMQ work.
On a Windows 7 Enterprise machine, I made a fresh install of Erlang 17.4 and RabbitMQ 3.4.3 x64. The installation was successful and uneventful.
I have not yet tried to create my first queue or exchange, but I already see trouble. This problem is similar to another SO post, but that other post appears to involve clustering, which I don't have. Furthermore, that other poster can circumvent his issue by restarting the RabbitMQ service; that approach does not work for me.
My "nodedown" problem is evident at the RabbitMQ command prompt:
C:\Program Files (x86)\RabbitMQ Server\rabbitmq_server-3.4.3\sbin>rabbitmqctl status
Status of node rabbit#TPAJ05421843 ...
Error: unable to connect to node rabbit#TPAJ05421843: nodedown
DIAGNOSTICS
attempted to contact: [rabbit#TPAJ05421843]
rabbit#TPAJ05421843:
* connected to epmd (port 4369) on TPAJ05421843
* epmd reports: node 'rabbit' not running at all
other nodes on TPAJ05421843: ['RabbitMQ']
* suggestion: start the node
current node details:
- node name: 'rabbitmqctl-19884#TPAJ05421843'
- home dir: H:\
- cookie hash: PD4QQCYrf0TME9vIko3Xuw==
Based on the above, I chose to check the status of the node explicitly named 'RabbitMQ'. I get this:
C:\Program Files (x86)\RabbitMQ Server\rabbitmq_server-3.4.3\sbin>rabbitmqctl -n RabbitMQ status
Status of node 'RabbitMQ#TPAJ05421843' ...
Error: unable to connect to node 'RabbitMQ#TPAJ05421843': nodedown
DIAGNOSTICS
attempted to contact: ['RabbitMQ#TPAJ05421843']
RabbitMQ#TPAJ05421843:
* connected to epmd (port 4369) on TPAJ05421843
* epmd reports node 'RabbitMQ' running on port 59301
* TCP connection succeeded but Erlang distribution failed
* suggestion: hostname mismatch?
* suggestion: is the cookie set correctly?
current node details:
- node name: 'rabbitmqctl-23076#TPAJ05421843'
- home dir: H:\
- cookie hash: PD4QQCYrf0TME9vIko3Xuw==
Ok, this is barely better since at least it acknowledges 'RabbitMQ' running on port 59301. But what the heck could it mean that "Erlang distribution failed"?
When I try to research this topic, I found articles saying "be sure you have matched cookies." Based on that I found this article, which claims the "cookie mismatch" does not pertain to me, because I have not created (nor intend to create) a RabbitMQ cluster.
What should I do?
I had this same problem today. There were no cookie or firewall problems and windows reported that the service was running successfully. This is what finally fixed it:
Run RabbitMQ sbin command prompt as administrator.
Run "rabbitmq-service remove"
Run "rabbitmq-service install"
For some reason the service set up by the installer did not configure several registry entries. Running this set them correctly and allowed the service to run.
One thing I noticed was that before I did this, there was no description of the service in the Windows Services view. After installing with the rabbitmq-service command, the description was visible. This might be a quick indicator if you are having the same problem.
As #eddyP commented, I had two different Erlang cookie files:
A server cookie file, located at $env:WINDIR\system32\config\systemprofile\.erlang.cookie (prior to Erlang 20.2 it was located at $env:WINDIR\.erlang.cookie).
A client cookie file, located at $env:USERPROFILE\.erlang.cookie.
Copying the server cookie file over the client one, so that both files were the same, fixed the problem for me.
For further details, see "How Nodes (and CLI tools) Authenticate to Each Other: the Erlang Cookie".
From RabbitMQ Command Prompt sbin (run as administrator) execute this command:
rabbitmq-server restart
In Windown, For some reason delete all folder in c:\Users\xxx\AppData\Roaming\RabbitMQ\db\ (xxx is your username)
then flow #Jerdev answer and
start rabbitmq net start rabbitmq
check rabbitmq service rabbitmqctl status
The same question on the RabbitMQ mailing list: https://groups.google.com/forum/#!topic/rabbitmq-users/0s1ExFhl4hM.
The Erlang cookie is used by rabbitmqctl as well as server nodes, so it may need being taken care of (placed in the correct location).
See "Installing as a non-administrator user leaves .erlang.cookie in the wrong place" on Windows quirks.
I resolve my problem doing this in Windows 10.
Execute RabbitMQ Command Prompt (sbin dir) as administrator.
Execute "rabbitmq-service remove" in (RabbitMQ Command Prompt).
Execute %AppData% in Run Dialog Box of Windows.
Delete all files in RabbitMQ folder.
Execute "rabbitmq-service install" in (RabbitMQ Command Prompt).
Execute "rabbitmqctl start_app" in (RabbitMQ Command Prompt).
If you come here looking for a linux answer for the same error message, try
sudo service rabbitmq-server start
(which is not a blocking command)
Just do the following:
Uninstall rabbitmq and erlang.
delete the rabbitmq folder existing in your appdata (if you dont
know the appdata location, just type echo %AppData% in the command
prompt)
Then install erlang first and then rabbitmq.
After installing, enable the management plugin using below command:
rabbitmq-plugins enable rabbitmq_management
For me the cookies didnt match, like the other comments but the locations was in a different path for those having the same issue as me C:\Windows\System32\config\systemprofile
That is happening because rabbit MQ is not being installed correctly on Windows (and this error is misleading!). So to solve it do the following:
type "cmd" in Cortana search or in "Run" for older version of Windows
right click on in and choose "Run as Administrator"
go to rabbit's sbin folder (cd "C:\Program Files\RabbitMQ Server\rabbitmq_server-3.7.4\sbin")
run: rabbitmq-service remove
run: rabbitmq-service install
now you can run
6. rabbitmq-plugins enable rabbitmq_management
7. rabbitmq-service start
8. and, finally, run: start http://localhost:15672
9. log on as user "guest" with password: "guest" and that's it. Happy Rabbiting!
I missed restarting my WINDOWS OS and then deleting the old version of ERLANG (which I uninstalled before restarting).
Somehow the fresh installation of Rabbit was referring to the old (un-installed version) and all the mismatch was happening. Clue was the 'services' referred Rabbit from the old ERLANG version.
This is how I resolved the error in my Windows 8 system:
Check for a syntax error in the rabbitmq.config file placed in the AppData folder for Windows.
How to check if there is any syntax error?
You can run rabbitmq-server restart from sbin folder in:
Program Files/RabbitMQ/rabbitmq_server_x.x/sbin/.
Replace the content of the rabbitmq.config with rabbitmq.config.example.
You may find the rabbitmq.config.example in:
Program Files/RabbitMQ/rabbitmq_server_x.x/etc/
Warning, you will lose the configuration you have saved previously with rabbitmq.
After changing the files, just hit
rabbitmq-server restart
in the sbin folder mentioned above.
The RabbitMQ windows service will not start:
C:\Program Files (x86)\RabbitMQ Server\rabbitmq_server-3.0.4\sbin>rabbitmq-service.bat start
C:\Program Files (x86)\erl5.10.1\erts-5.10.1\bin\erlsrv: Failed to start service RabbitMQ.
Error: The process terminated unexpectedly.
I can run rabbitmq-server.bat without any problems.
No log entries are made to %appdata%\RabbitMQ\log\ directory when trying to start the service.
Any suggestions to how I make it work? Please...
I faced the same problem and was able to solve the problem following the steps mentioned below.
Run the command prompt as Administrator
Navigate to the sbin directory and uninstall the service. rabbitmq-service remove
Reinstall the service rabbitmq-service install
Enable the plugins. rabbitmq-plugins enable rabbitmq_management
Start the service rabbitmq-service start
Go to "http://localhost:15672/"
Problem solved!
My IT department has mapped %appdata% to a network share and it seems that the RabbitMQ scripts can’t work with that.
I solved the problem this way: Set the environment variable “RABBITMQ_BASE” to “c:\rabbitmq”, uninstall the service (rabbitmq-service.bat remove) and install the service again (rabbitmq-service.bat install).
Deleting "AppData\Roaming\RabbitMQ" solved this problem for me
In my case helped running console as an administrator
- check Erlang compatability with RabbitMQ
** Installtion
Install Erlang
Install Rabbit_MQ
Set system variables
Set Environment variable-
RABBITMQ_BASE c:\RabbitMQ Server
ERLANG_HOME C:\Program Files\erl10.7
Config MQ Server
stop RabbitMq : rabbitmq-service.bat stop
Enable management : rabbitmq-plugins.bat enable rabbitmq_management
Reinstall server : rabbitmq-service.bat install
Start Server : rabbitmq-service.bat start
Start App : rabbitmqctl.bat start_app
Open Brower : http://localhost:15672 user guest / guest
Add new User
List users : rabbitmqctl.bat list_users
Add new user : rabbitmqctl.bat add_user user1 pass1
Give administrator privileges : rabbitmqctl.bat set_user_tags user1
I restarted my computer after install and things are running a lot smoother
Deleting HKEY_LOCAL_MACHINE\SOFTWARE\Ericsson\Erlang\ErlSrv\1.1\RabbitMQ folder from Registry has solved the problem for me. I have to reinstall (uninstall and install) the RabbitMQ after deleting the registry.
Moreover, I have deleted C:\Users\<USERNAME>\AppData\Roaming\RabbitMQ earlier.
I have found the solution from a post of a google group.
My situation was caused by wrong Erlang version. I solved it by the following steps:
Uninstall the older version Erlang
Install the newly version Erlang accordding to https://www.rabbitmq.com/which-erlang.html
Reinstall RabbitMQ
Install RabbitMQ plugin by opening the Windows's cmd and switch to the sbin directory eg.Your-Path\rabbitmq_server-3.7.13\sbin and execute the command rabbitmq-plugins.bat enable rabbitmq_management
Start RabbitMQ and visit http://localhost:15672/
How I solved the same issue... Reinstalled Erlang from x86 to x64. Also checked the option to install Microsoft distributed dlls. I don't know which one of two helped me but it helped at least.
run the following command after installation rabbitmq-plugins enable rabbitmq_management on rabbit mq pathRabbitMQ Server\rabbitmq_server-3.6.9\sbin>rabbitmq-plugins enable rabbitmq_management
I have also come across similar problem, but found that the problem due to folder named "Program" in the OS drive.
Reference.
I renamed my computer and restart. Then everything works fine. I guess Chinese characters effect the rabbit service.
old name: ĺ™
new name: adam
I faced the same issue of 1067 error in Windows 10. It turns out the rabbitmq config file in location C:\Users\IPS\AppData\Roaming\RabbitMQ\advanced.config was having some syntax error. It was changed from the default configuration. Also, the rabbitmq.conf file at the same location also had a syntax error. I removed the rabbitmq.conf file and removed the changes from the advanced.config file. After that ranbbitmq service started without any issues.