I need to insert the huge records that are comes as Interface file(text files).
Now am using this format to insert records.
INSERT ALL
INTO POSTAL_CODE( postal_code,desc)
VALUES('100','Coimbatore')
INTO POSTAL_CODE (postal_code,desc)
VALUES('101','Mumbai') SELECT * FROM DUAL;
But this gives bad performance. I am new to database. So please help me to make faster inserting records. But in db2 this format is supports.
INSERT INTO POSTAL_CODE( postal_code,desc)
VALUES('100','Coimbatore'), (postal_code,desc),('101','Mumbai');
But why oracle is not support this type of insert. Please help me. Am stuck with this. I need to use another solution for this and that should be faster....
You can change the below statement
INSERT INTO POSTAL_CODE( postal_code,desc) VALUES('100','Coimbatore'),
(postal_code,desc),('101','Mumbai');
To be like below using UNION which should work in Oracle as well
INSERT INTO POSTAL_CODE( postal_code,"desc")
select '100','Coimbatore' from dual
union all
select '99','Goa' from dual
union all
select '101','Mumbai' from dual;
You should rather check the utilities provided by Oracle for this purpose like SQL*Loader
As well check this other SO post Loading data from a text file to a table in oracle
Related
I created a table in oracle like
CREATE TABLE suppliers AS (SELECT * FROM companies WHERE id > 1000);
I would like to know the complete select statement which was used to create this table.
I have already tried get_ddl but it is not giving the select statement. Can you please let me know how to get the select statement?
If you're lucky one of these statements will show the DDL used to generate the table:
select *
from gv$sql
where lower(sql_fulltext) like '%create table suppliers%';
select *
from dba_hist_sqltext
where lower(sql_text) like '%create table%';
I used the word lucky because GV$SQL will usually only have results for a few hours or days, until the data is purged from the shared pool. DBA_HIST_SQLTEXT will only help if you have AWR enabled, the statement was run in the last X days that AWR is configured to hold data (the default is 8), the statement was run after the last snapshot collection (by default it happens every hour), and the statement ran long enough for AWR to think it's worth saving.
And for each table Oracle does not always store the full SQL. For security reasons, DDL statements are often truncated in the data dictionary. Don't be surprised if the text suddenly cuts off after the first N characters.
And depending on how the SQL is called the case and space may be different. Use lower and lots of wildcards to increase the chance of finding the statement.
TRY THIS:
select distinct table_name
from
all_tab_columns where column_name in
(
select column_name from
all_tab_columns
where table_name ='SUPPLIERS'
)
you can find table which created from table
Will local database get disturb if we create DUAL table ?
Kindly Suggest me ?
create table DUAL
(
x varchar2(1)
);
No you cannot create a dual table. DUAL table is owned by SYS and SYS owns the data dictionary so you can not create it.
See the wiki
The DUAL table is a special one-row table present by default in all
Oracle database installations. It is suitable for use in selecting a
pseudocolumn such as SYSDATE or USER. The table has a single
VARCHAR2(1) column called DUMMY that has a value of 'X'.
Even if you try to create a DUAL table then it will create problems for you as everytime the Oracle engine has to ensure that you are not calling the SYS dual table. You need to specify the database and schema as well. It may lead to too much of ambiguity problem for Oracle engine. The Oracle optimizer knows everything that DUAL does and what it should do and it then does things based on that.
SQL Reference:
DUAL is a table automatically created by Oracle Database along with
the data dictionary. DUAL is in the schema of the user SYS but is
accessible by the name DUAL to all users. It has one column, DUMMY,
defined to be VARCHAR2(1), and contains one row with a value X.
Selecting from the DUAL table is useful for computing a constant
expression with the SELECT statement. Because DUAL has only one row,
the constant is returned only once. Alternatively, you can select a
constant, pseudocolumn, or expression from any table, but the value
will be returned as many times as there are rows in the table. Refer
to "About SQL Functions" for many examples of selecting a constant
value from DUAL.
Beginning with Oracle Database 10g Release 1, logical I/O is not
performed on the DUAL table when computing an expression that does not
include the DUMMY column. This optimization is listed as FAST DUAL in
the execution plan. If you SELECT the DUMMY column from DUAL, then
this optimization does not take place and logical I/O occurs.
Will local database get disturb if we create DUAL table ?
Yes, of course weird things can and will happen. DUAL is owned by SYS. SYS owns the data dictionary, therefore DUAL is part of the data dictionary. You are not to modify the data dictionary via SQL ever.
And the first question is "How will you guarantee only one row in your own DUAL table"?
This goes back to the original article Self-Managing PL/SQL by Steven Feuerstein where he explains "Use Your Own DUAL Table". But, that was back then when DUAL table was prone to such things.
However, in the recent releases, the DUAL table structure has been made robust and you cannot have more than single row ever. Here is a proof:
SQL> conn sys#pdborcl as sysdba
Enter password:
Connected.
SQL> insert into dual select * from dual;
1 row created.
SQL> select * from dual;
D
-
X
I know, few would argue that we can handle one row with our own DUAL table using a trigger or ROWNUM =1, however, you will soon realize the cons. It is simply not necessary from 10g on wards, as the DUAL table is now a memory structure and you cannot add a row to it as demonstrated above.
Imagine a situation where you have created your own DUAL table, and you are using the call to DUAL table in your PL/SQL code to get the USER, SYSDATE, SYSTIMESTAMP etc.
This is the code taken from the stdbody.sql file delivered with Oracle Database:
1 FUNCTION USER
2 RETURN VARCHAR2
3 IS
4 c VARCHAR2 (255);
5 BEGIN
6 SELECT USER
7 INTO c
8 FROM SYS.DUAL;
9
10 RETURN c;
11 END;
If you ever have more than one row in your own DUAL table, every call to the USER function in your PL/SQL code will fail with TOO_MANY_ROWS error.
Bottomline : All the discussion about using your own DUAL table made sense back then before 10g days. The DUAL table is now a robust memory structure and doesn't allow to add a row to it. So, makes no sense to use your own DUAL table rather than the SYS.DUAL.
In PLSQL I run:
truncate table MyOracleTableName;
commit work;
insert into MyOracleTablename
select a,b,c,trunc(sysdate) as datadate
from AnotherOracleTableName
where there is a ton of nasty criteria
union
select a,b,c,trunc(sysdate) as datadate from AnotherOracleTableName
where there is a ton of different nasty criteria;
commit work;
In PLSQL Developer this inserts one row.
When I run the SQL (without the semi colons and the commit work statements) in SSIS, I get a primary key violation from MyOracleTableName.
I have validated that the truncate from SSIS is committed in Oracle.
When I run the SQL above in PLSQL Developer and replace the union with union all, I see a second row and the insert fails for a PK violation. As it should with a union all allowing the duplicate.
This is currently part of an SSIS 2005 package using MSDAORA where it works just fine. I am now re-writing in SSIS 2008 using Native OLE DB providor for Oracle.
I cannot use MSDAORA in my new environment. Is this a driver issue and is there a work around other than breaking these into multiple statements where the second inserts only what is not already in MyOracleTableName?
Regards.
I figured out the problem after dinner.
The Primary key constraint is a composite key on columns A and B. The Union de-dups on columns a,b,c and the date. In Oracle the trunc(sysdate) returns mm/dd/yyyy. In SSIS the trunc(sysdate) is being parsed out to the second or milisecond. This results in two unique rows (to SQL Server and Microsoft) due to the timestamp, and then attempts to insert duplicate rows where columns a,b, and c are duplicated.
The solution is this:
truncate table MyOracleTableName;
commit work;
insert into MyOracleTablename
select a.*,
trunc(sysdate) as datadate
from(
select a,b,c
from AnotherOracleTableName
where there is a ton of nasty criteria
union
select a,b,c from AnotherOracleTableName
where there is a ton of different nasty criteria) a
commit work;
This allows the union to kill the duplicate and runs the trunc(sysdate) once thereby presenting the single row to my primary key constraint.
Thank you.
I'd like to run statements like
SELECT date_add('2008-12-31', 1) FROM DUAL
Does Hive (running on Amazon EMR) have something similar?
Best solution is not to mention table name.
select 1+1;
Gives the result 2. But poor Hive need to spawn map reduce to find this!
Not yet: https://issues.apache.org/jira/browse/HIVE-1558
To create a dual like table in hive where there is one column and one row you can do the following:
create table dual (x int);
insert into table dual select count(*)+1 as x from dual;
Test an expression:
select split('3,2,1','\\,') as my_new_array from dual;
Output:
["3","2","1"]
There is a nice working solution (well, workaround) available in the link, but it is slow as you might imagine.
The idea is that you create a table with a dummy field, create a text file whose content is just 'X', load that text into that table. Viola.
CREATE TABLE dual (dummy STRING);
load data local inpath '/path/to/textfile/dual.txt' overwrite into table dual;
SELECT date_add('2008-12-31', 1) from dual;
Hive does support this function now and also does support many other dates function as well.
You can run query like below in hive, which will add days the provided date in first argument.
SELECT DATE_ADD('2019-03-01', 5);
Hive Date Functions
Quick Solution:
We can use existing table to achieve dual functionality by following query.
SELECT date_add('2008-12-31', 1) FROM <Any Existing Table> LIMIT 1
For example:
SELECT CONCAT('kbdjj','56454') AS a, null AS b FROM tbl_name LIMIT 1
Result
"limit 1" in query is used to avoid multiple occurrences of specified values (kbdjj56454,null).
I've heard people referring to this table and was not sure what it was about.
It's a sort of dummy table with a single record used for selecting when you're not actually interested in the data, but instead want the results of some system function in a select statement:
e.g. select sysdate from dual;
See http://www.adp-gmbh.ch/ora/misc/dual.html
As of 23c, Oracle supports select sysdate /* or other value */, without from dual, as has been supported in MySQL for some time already.
It is a dummy table with one element in it. It is useful because Oracle doesn't allow statements like
SELECT 3+4
You can work around this restriction by writing
SELECT 3+4 FROM DUAL
instead.
From Wikipedia
History
The DUAL table was created by Chuck Weiss of Oracle corporation to provide a table for joining in internal views:
I created the DUAL table as an underlying object in the Oracle Data Dictionary. It was never meant to be seen itself, but instead used
inside a view that was expected to be queried. The idea was that you
could do a JOIN to the DUAL table and create two rows in the result
for every one row in your table. Then, by using GROUP BY, the
resulting join could be summarized to show the amount of storage for
the DATA extent and for the INDEX extent(s). The name, DUAL, seemed
apt for the process of creating a pair of rows from just one. 1
It may not be obvious from the above, but the original DUAL table had two rows in it (hence its name). Nowadays it only has one row.
Optimization
DUAL was originally a table and the database engine would perform disk IO on the table when selecting from DUAL. This disk IO was usually logical IO (not involving physical disk access) as the disk blocks were usually already cached in memory. This resulted in a large amount of logical IO against the DUAL table.
Later versions of the Oracle database have been optimized and the database no longer performs physical or logical IO on the DUAL table even though the DUAL table still actually exists.
I think this wikipedia article may help clarify.
http://en.wikipedia.org/wiki/DUAL_table
The DUAL table is a special one-row
table present by default in all Oracle
database installations. It is suitable
for use in selecting a pseudocolumn
such as SYSDATE or USER The table has
a single VARCHAR2(1) column called
DUMMY that has a value of "X"
It's the special table in Oracle. I often use it for calculations or checking system variables. For example:
Select 2*4 from dual prints out the result of the calculation
Select sysdate from dual prints the server current date.
A utility table in Oracle with only 1 row and 1 column. It is used to perform a number of arithmetic operations and can be used generally where one needs to generate a known output.
SELECT * FROM dual;
will give a single row, with a single column named "DUMMY" and a value of "X" as shown here:
DUMMY
-----
X
Kind of a pseudo table you can run commands against and get back results, such as sysdate. Also helps you to check if Oracle is up and check sql syntax, etc.
The DUAL table is a special one-row table present by default in all Oracle database installations. It is suitable for use in selecting a pseudocolumn such as SYSDATE or USER
The table has a single VARCHAR2(1) column called DUMMY that has a value of "X"
You can read all about it in http://en.wikipedia.org/wiki/DUAL_table
DUAL is necessary in PL/SQL development for using functions that are only available in SQL
e.g.
DECLARE
x XMLTYPE;
BEGIN
SELECT xmlelement("hhh", 'stuff')
INTO x
FROM dual;
END;
More Facts about the DUAL....
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1562813956388
Thrilling experiments done here, and more thrilling explanations by Tom
DUAL we mainly used for getting the next number from the sequences.
Syntax : SELECT 'sequence_name'.NEXTVAL FROM DUAL
This will return the one row one column value(NEXTVAL column name).
another situation which requires select ... from dual is when we want to retrieve the code (data definition) for different database objects (like TABLE, FUNCTION, TRIGGER, PACKAGE), using the built in DBMS_METADATA.GET_DDL function:
select DBMS_METADATA.GET_DDL('TABLE','<table_name>') from DUAL;
select DBMS_METADATA.GET_DDL('FUNCTION','<function_name>') from DUAL;
in is true that nowadays the IDEs do offer the capability to view the DDL of a table, but in simpler environments like SQL Plus this can be really handy.
EDIT
a more general situation: basically, when we need to use any PL/SQL procedure inside a standard SQL statement, or when we want to call a procedure from the command line:
select my_function(<input_params>) from dual;
both recipes are taken from the book 'Oracle PL/SQL Recipes' by Josh Juneau and Matt Arena
The DUAL is special one row, one column table present by default in all Oracle databases. The owner of DUAL is SYS.
DUAL is a table automatically created by Oracle Database along with the data functions. It is always used to get the operating systems functions(like date, time, arithmetic expression., etc.)
SELECT SYSDATE from dual;
It's a object to put in the from that return 1 empty row. For example:
select 1 from dual;
returns 1
select 21+44 from dual;
returns 65
select [sequence].nextval from dual;
returns the next value from the sequence.