Hope things going good.
I want to connect two windows server using ssh.But, My problem is, when I use the ANT task 'sshexec' to execute a .bat file from a remote WINDOWS server 2009 like this:
<sshexec host="10.46.220.108"
username="support"
password="India123"
trust="true"
verbose="true"
command="D:\project\jboss-eap-6.1\bin\standalone.bat -b hostname41" />
My execution gets hanged and stops with the below lines.
[sshexec] Connecting to hostname:22
[sshexec] cmd :D:\project\jboss-eap-6.1\bin\standalone.bat -b hostname41
[sshexec] Microsoft Windows [Version 6.1.7601]
[sshexec] Copyright (c) 2009 Microsoft Corporation. All rights reserved.
[sshexec] C:\users\administrator>
Guide me to resolve this.
NOTE: The remote server is running copssh in port number 22
Related
I have two 32-bit Windows Server 2003 R2, SP2 machines. I've tried using DebugDiag 1.2 to perform a performance-based dump of an IIS App Pool. I've tried this on both servers and they are coming up with a .dmp file that cannot be read by WinDBG/Visual Studio/DebugDiag.
I have been able to successfully create a manual .dmp file in the past using Adplus.vbs from the command line.
When using dumpchk.exe I get this message:
C:\debugging\server>"c:\Program Files (x86)\Debugging Tools for Windows (x86)\dumpchk.exe" w3wp.exe_HTTPRESPONSE_RULE1.dmp
Loading dump file w3wp.exe_HTTPRESPONSE_RULE1.dmp
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\debugging\server\w3wp.exe_HTTPRESPONSE_RULE1.dmp]
Minidump does not have system info
Could not open dump file [w3wp.exe_HTTPRESPONSE_RULE1.dmp], HRESULT 0x80004005
"Unspecified error"
**** DebugClient cannot open DumpFile - error 80004005
Has anyone else run across something like this?
I have a few problems trying to install .msi files in my computer. I have a few executables that I want to run but I can't install them running them as administrator, I normally get the error: Windows installer service could not be accessed.
I tried to open them on command line to get the log from the 2 different MSI files and I get almost an identical result from both logs:
=== Verbose logging started: 1/30/2014 13:38:48 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\system32\msiexec.exe ===
MSI (c) (D0:30) [13:38:48:733]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (D0:30) [13:38:48:733]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (D0:60) [13:38:48:739]: Resetting cached policy values
MSI (c) (D0:60) [13:38:48:740]: Machine policy value 'Debug' is 0
MSI (c) (D0:60) [13:38:48:740]: ******* RunEngine:
******* Product: C:\Users\TR\Downloads\komodo.msi
******* Action:
******* CommandLine: **********
MSI (c) (D0:60) [13:38:48:746]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (D0:60) [13:38:48:776]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (c) (D0:60) [13:38:48:849]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Users\TR\Downloads\komodo.msi' against software restriction policy
MSI (c) (D0:60) [13:38:48:849]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (D0:60) [13:38:48:849]: SOFTWARE RESTRICTION POLICY: C:\Users\TR\Downloads\komodo.msi is not digitally signed
MSI (c) (D0:60) [13:38:48:850]: SOFTWARE RESTRICTION POLICY: C:\Users\TR\Downloads\komodo.msi is permitted to run at the 'unrestricted' authorization level.
MSI (c) (D0:60) [13:38:48:854]: Failed to connect to server. Error: 0x8007000E
MSI (c) (D0:60) [13:38:48:861]: MainEngineThread is returning 1601
=== Verbose logging stopped: 1/30/2014 13:38:48 ===
Any ideas?
Try executing these commands with admin rights after booting your computer in safe mode:
Boot to safe mode, launch an admin rights command prompt
%windir%\system32\msiexec.exe /unregister
%windir%\system32\msiexec.exe /regserver
%windir%\syswow64\msiexec.exe /unregister
%windir%\syswow64\msiexec.exe /regserver
Reboot, launch Windows normally
Open CMD as administrator
Go to the .msi parent folder for example Downloads
Inside downloads folder type xxxxx.msi
And your installation will run as administrator and you can install your file without problem
When you launch an MSI, a client process is started (msiexec.exe). This is why you see all these (c) entries in the logs.
There is also an on demand windows service (which also happens to be msiexec.exe) The client autostarts this service and connects to it. This is failing. You can try to see if the service will start manually. If not, try unregistering, reregistering and restarting the service. Examples can be seen here.
This might be specific to that system. Perhaps it's an AV issue or an issue with the OS. If you can create a clean virtual machine OS and your install works there then you'd know it's that specific system.
It's a common error, and this may apply, but I don't know that it should be done on newer OS versions:
http://support.microsoft.com/kb/324516/en-us
How can I check all oracle versions and platforms that installed on windows machine from a command line or byscript ?
Till now I was using tnsping and check for the output but it only show the first version according to the path environment variable.
Is there a way to get this info from the registry and without actually connect to DB ?
Simplest method is to run command prompt and type sqlplus
it will show you the oracle version without actually logging into it.
Example: Run -> cmd
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\xyz>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Wed Jan 1 16:46:40 2014
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name:
You'll want to query the Oracle Inventory.
For every Oracle installation, there is an entry in the "Oracle inventory". By default, the Oracle inventory is located under "C:\Program Files\Oracle\Inventory". However, this location can be changed.
In the Registry, the location of the Oracle inventory is in "HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE", where you'll find the key "inst_loc". There, you'll find an XML file containing all installed versions (inventory.xml). See the Oracle documentation for an example.
Go here and open with Notepad:
C:\Program Files (x86)\Oracle\Inventory\ContentsXML
C:\Program Files\Oracle\Inventory\ContentsXML
Open File:
inventory.xml
<?xml version="1.0" standalone="yes" ?>
<!-- Copyright (c) 1999, 2006, Oracle. All rights reserved. -->
<!-- Do not modify the contents of this file by hand. -->
<INVENTORY>
<VERSION_INFO>
<SAVED_WITH>11.1.0.6.0</SAVED_WITH>
<MINIMUM_VER>2.1.0.6.0</MINIMUM_VER>
</VERSION_INFO>
<HOME_LIST>
<HOME NAME="OraClient11g_home1" LOC="D:\Oracle\product\11.1.0\client_1" TYPE="O" IDX="1"/>
</HOME_LIST>
</INVENTORY>
When I run this command
emctl start dbconsole
I get a message
http://intitccud-5095.interrait.info:5500/em/console/aboutApplication
- An instance of Oracle Enterprise Manager 10g Database Control is already running.
But when I try to open the link it says connection failed.
Please note - I had run
emctl status dbconsole
I got the below message:
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://intitccud-5095.interrait.info:5500/em/console/aboutApplication
Please help - what should I do now?
Did you try https too with same link?
I am working with heroku from the site http://devcenter.heroku.com/articles/java.
My OS is windows7.
When I am typing the command heroku in command prompt I am getting the following:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\HARIKA_RAM>heroku
Usage: heroku COMMAND [--app APP] [command-specific-options]
Primary help topics, type "heroku help TOPIC" for more details:
It is working fine.
When I am trying to login it is giving the following message:
C:\Users\HARIKA_RAM>heroku login
Enter your Heroku credentials.
Email: evsandeep#gmail.com
Password:
! Unable to connect to api.heroku.com
C:\Users\HARIKA_RAM>heroku update
-----> Updating to latest client... failed
! getaddrinfo: This is usually a temporary error during hostname
resolution and means that the local server did not receive a response from an
authoritative server.
Any help is appreciated. Thanks in advance.
Did you try setting your http_proxy if you are behind a firewall ?
eg. set http_proxy=proxy.mycompany.com:8080