For a first time I need to create an .sh for do something. My aim is to unzip a lot of zip folders, so I've wrote the script below:
for zipfiles in /downloads/*.zip; do unzip $zipfiles; done
I can unzip all but I noticed that there are some files with the same name and typing y I can ultimate the process.
There is a way to extract only files with a specific extension, like .docx, instead of the entire zip folder? I'm absolutely sure that there aren't .docx with the same name.
You can specify a pattern:
for zipfiles in /downloads/*.zip; do unzip "$zipfiles" '*.docx'; done
Tested to work with UnZip 6.00.
You can also specify the -x option to exclude.
try this one, it can be useful for your purpose.
for zipfiles in /downloads/*.zip; do unzip -xo "$zipfiles" '*.docx' ; done
by this option overwrite files WITHOUT prompting.
Basically I have .bz2.gz.bz2 file which on extraction gives a .bz2.gz file and on again extraction gives .bz2 file. In this .bz2 file, is my txt file which I want to search on using grep command. I have searched for this but I got bzgrep command which will only search in bz2 file and not the corresponding .gz.bz2 file and give me no results.
Is there a command in unix system which will recursively search in a zipped archive for zipped archive and return results only when it finds the txt file inside it?
P.S: the txt file may be deep in the archive to level 10 max. I want the command to recursively find the txt file and search for the required string. And there will be no other than an archive inside the archive until the txt file level.
I'm not sure I fully understand but maybe this will help:
for i in /path/to/each/*.tar.bz2; do
tar -xvjf "$i" -C /path/to/save/in
rm $i
done
extract all `tar.bz2` and save them in directory then remove the `.bz2`
Thnx for sharing your question.
There are a couple of strange things with it though:
It makes no sense to have a .bz2.gz.bz2 file, so have you created this file yourself? If so, I'd advise you to reconsider doing so in that manner.
Also, you mention there is a .bz2 that would apparently contain different archives, but a .bz2 can only contain one single file by design. So if it contains archives it is probably a .tar.bz2 file in which the tar-file holds the actual archives.
In answer to your question, why can't you write a simple shell script that will unpack your .bz2.gz.bz2 into a .bz2.gz and then into a .bz2 file and then execute your bzgrep command on that file?
I do not understand where it is exactly that you seem to get stuck..
When I compress files with the built in zip compressor in Mac OSX, it causes an extra folder titled "__MACOSX" to be created in the extracted zip.
Can I adjust my settings to keep this folder from being created or do I need to purchase a third party compression tool?
UPDATE: I just found a freeware app for OSX that solves my problem: "YemuZip"
UPDATE 2: YemuZip is no longer freeware.
Can be fixed after the fact by zip -d filename.zip __MACOSX/\*
And, to also delete .DS_Store files: zip -d filename.zip \*/.DS_Store
When I had this problem I've done it from command line:
zip file.zip uncompressed
EDIT, after many downvotes: I was using this option for some time ago and I don't know where I learnt it, so I can't give you a better explanation. Chris Johnson's answer is correct, but I won't delete mine. As one comment says, it's more accurate to what OP is asking, as it compress without those files, instead of removing them from a compressed file. I find it easier to remember, too.
Inside the folder you want to be compressed, in terminal:
zip -r -X Archive.zip *
Where -X means: Exclude those invisible Mac resource files such as “_MACOSX” or “._Filename” and .ds store files
source
Note: Will only work for the folder and subsequent folder tree you are in and has to have the * wildcard.
This command did it for me:
zip -r Target.zip Source -x "*.DS_Store"
Target.zip is the zip file to create. Source is the source file/folder to zip up. The -x parameter specifies the file/folder to exclude.
If the above doesn't work for whatever reason, try this instead:
zip -r Target.zip Source -x "*.DS_Store" -x "__MACOSX"
I'm using this Automator Shell Script to fix it after.
It's showing up as contextual menu item (right clicking on any file showing up in Finder).
while read -r p; do
zip -d "$p" __MACOSX/\* || true
zip -d "$p" \*/.DS_Store || true
done
Create a new Service with Automator
Select "Files and Folders" in "Finder"
Add a "Shell Script Action"
zip -r "$destFileName.zip" "$srcFileName" -x "*/\__MACOSX" -x "*/\.*"
-x "*/\__MACOSX": ignore __MACOSX as you mention.
-x "*/\.*": ignore any hidden file, such as .DS_Store .
Quote the variable to avoid file if it's named with SPACE.
Also, you can build Automator Service to make it easily to use in Finder.
Check link below to see detail if you need.
Github
The unwanted folders can be also be deleted by the following way:
zip -d filename.zip "__MACOSX*"
Works best for me
The zip command line utility never creates a __MACOSX directory, so you can just run a command like this:
zip directory.zip -x \*.DS_Store -r directory
In the output below, a.zip which I created with the zip command line utility does not contain a __MACOSX directory, but a 2.zip which I created from Finder does.
$ touch a
$ xattr -w somekey somevalue a
$ zip a.zip a
adding: a (stored 0%)
$ unzip -l a.zip
Archive: a.zip
Length Date Time Name
-------- ---- ---- ----
0 01-02-16 20:29 a
-------- -------
0 1 file
$ unzip -l a\ 2.zip # I created `a 2.zip` from Finder before this
Archive: a 2.zip
Length Date Time Name
-------- ---- ---- ----
0 01-02-16 20:29 a
0 01-02-16 20:31 __MACOSX/
149 01-02-16 20:29 __MACOSX/._a
-------- -------
149 3 files
-x .DS_Store does not exclude .DS_Store files inside directories but -x \*.DS_Store does.
The top level file of a zip archive with multiple files should usually be a single directory, because if it is not, some unarchiving utilites (like unzip and 7z, but not Archive Utility, The Unarchiver, unar, or dtrx) do not create a containing directory for the files when the archive is extracted, which often makes the files difficult to find, and if multiple archives like that are extracted at the same time, it can be difficult to tell which files belong to which archive.
Archive Utility only creates a __MACOSX directory when you create an archive where at least one file contains metadata such as extended attributes, file flags, or a resource fork. The __MACOSX directory contains AppleDouble files whose filename starts with ._ that are used to store OS X-specific metadata. The zip command line utility discards metadata such as extended attributes, file flags, and resource forks, which also means that metadata such as tags is lost, and that aliases stop working, because the information in an alias file is stored in a resource fork.
Normally you can just discard the OS X-specific metadata, but to see what metadata files contain, you can use xattr -l. xattr also includes resource forks and file flags, because even though they are not actually stored as extended attributes, they can be accessed through the extended attributes interface. Both Archive Utility and the zip command line utility discard ACLs.
You can't.
But what you can do is delete those unwanted folders after zipping. Command line zip takes different arguments where one, the -d, is for deleting contents based on a regex. So you can use it like this:
zip -d filename.zip __MACOSX/\*
Cleanup .zip from .DS_Store and __MACOSX, including subfolders:
zip -d archive.zip '__MACOSX/*' '*/__MACOSX/*' .DS_Store '*/.DS_Store'
Walkthrough:
Create .zip as usual by right-clicking on the file (or folder) and selecting "Compress ..."
Open Terminal app (search Terminal in Spotlight search)
Type zip in the Terminal (but don't hit enter)
Drag .zip to the Terminal so it converts to the path
Copy paste -d '__MACOSX/*' '*/__MACOSX/*' .DS_Store '*/.DS_Store'
Hit enter
Use zipinfo archive.zip to list files inside, to check (optional)
I have a better solution after read all of the existed answers. Everything could done by a workflow in a single right click.
NO additional software, NO complicated command line stuffs and NO shell tricks.
The automator workflow:
Input: files or folders from any application.
Step 1: Create Archive, the system builtin with default parameters.
Step 2: Run Shell command, with input as parameters. Copy command below.
zip -d "$#" "__MACOSX/*" || true
zip -d "$#" "*/.DS_Store" || true
Save it and we are done! Just right click folder or bulk of files and choose workflow from services menu. Archive with no metadata will be created alongside.
IMAGE UPDATE: I chose "Quick Action" when creating a new workflow - here’s an English version of the screenshot:
do not zip any hidden file:
zip newzipname filename.any -x "\.*"
with this question, it should be like:
zip newzipname filename.any -x "\__MACOSX"
It must be said, though, zip command runs in terminal just compressing the file, it does not compress any others. So do this the result is the same:
zip newzipname filename.any
Keka does this. Just drag your directory over the app screen.
Do you mean the zip command-line tool or the Finder's Compress command?
For zip, you can try the --data-fork option. If that doesn't do it, you might try --no-extra, although that seems to ignore other file metadata that might be valuable, like uid/gid and file times.
For the Finder's Compress command, I don't believe there are any options to control its behavior. It's for the simple case.
The other tool, and maybe the one that the Finder actually uses under the hood, is ditto. With the -c -k options, it creates zip archives. With this tool, you can experiment with --norsrc, --noextattr, --noqtn, --noacl and/or simply leave off the --sequesterRsrc option (which, according to the man page, may be responsible for the __MACOSX subdirectory). Although, perhaps the absence of --sequesterRsrc simply means to use AppleDouble format, which would create ._ files all over the place instead of one __MACOSX directory.
This is how i avoid the __MACOSX directory when compress files with tar command:
$ cd dir-you-want-to-archive
$ find . | xargs xattr -l # <- list all files with special xattr attributes
...
./conf/clamav: com.apple.quarantine: 0083;5a9018b1;Safari;9DCAFF33-C7F5-4848-9A87-5E061E5E2D55
./conf/global: com.apple.quarantine: 0083;5a9018b1;Safari;9DCAFF33-C7F5-4848-9A87-5E061E5E2D55
./conf/web_server: com.apple.quarantine: 0083;5a9018b1;Safari;9DCAFF33-C7F5-4848-9A87-5E061E5E2D55
Delete the attribute first:
find . | xargs xattr -d com.apple.quarantine
Run find . | xargs xattr -l again, make sure no any file has the xattr attribute. then you're good to go:
tar cjvf file.tar.bz2 dir
Another shell script that could be used with the Automator tool (see also benedikt's answer on how to create the script) is:
while read -r f; do
d="$(dirname "$f")"
n="$(basename "$f")"
cd "$d"
zip "$n.zip" -x \*.DS_Store -r "$n"
done
The difference here is that this code directly compresses selected folders without macOS specific files (and not first compressing and afterwards deleting).
Is anybody able to point me in the right direction for writing a batch script for a UNIX shell to move files into a zip one at at time and then delete the original.
I cant use the standard zip function because i don't have enough space to fit the zip being created.
So any suggestions please
Try this:
zip -r -m source.zip *
Not a great solution but simple, i ended up finding a python script that recursively zips a folder and just added a line to delete the file after it is added to the zip
You can achieve this using find as
find . -type f -print0 | xargs -0 -n1 zip -m archive
This will move every file into the zip preserving the directory structure. You are then left with empty directories that you can easily remove. Moreover using find gives you a lot of freedom on what files you want to compress.
I use :
zip --move destination.zip src_file1 src_file2
Here the detail of "--move" option from the man pages
--move
Move the specified files into the zip archive; actually, this
deletes the target directories/files after making the specified zip
archive. If a directory becomes empty after removal of the files, the
directory is also removed. No deletions are done until zip has
created the archive without error. This is useful for conserving disk
space, but is potentially dangerous so it is recommended to use it in
combination with -T to test the archive before removing all input
files.
I'm running the command
rar a -m0 -v100m rarname.rar *.*
On some files with a bash script. I know I specified the rarname, but because of the -v option which sets a size limit to the rar, this command can make lots of rars named rarname.part1.rar, rarname.part2.rar, etc.
What is the best way to get the list of files created?
This should do it:
rarname.*.rar
Globs are not limited to the DOS-style "name.ext" pattern.
You can either capture and parse the output from the rar command or create the rar'ed files in a temporary directory, and then process the files there.
I'd recommend the later option.