I'm new to Coded UI testing and TFS. I've written a coded UI test for my web application and looking for different options to automatically run it. Apparently the first option is to run it from visual studio. I have also found an article explaining how to associate a test method with a test case however I don't know whether I can run my test method (s) from TFS or not? How about running them with my build? I know the unit tests can be run with the build however I'm not sure about coded UI tests.
Yes, it is possible for you to run Coded UI test in the TFS build process.
Firstly, you need to configure the Team Build Service Host run as an interactive process. See this link.
Secondly, add the Coded UI test project into TFS Version Control.
Thirdly, create a build definition to build the Coded UI test project, and also specify tests to run.
Please have a check of this blog for the detailed steps: http://blogs.msdn.com/b/mathew_aniyan/archive/2009/05/26/coded-ui-test-in-a-team-build.aspx
Related
We have a TFS build definition that kicks off NUnit tests tagged with the 'Regression' test category. This uses the NUnit console runners annotation of
where cat = 'Regression'
However, we have multiple different environments where some tests will fail in one environment, they will pass in the other. We have not made much use of the Playlist feature, because I can not find a way to target a playlist when running remotely on TFS. Does anyone know how this can be done? Thanks!
Unfortunately, there is no way of specifying this/playlist in the TFS Build Definition for now. A related uservoice:
Allow test playlists to be used by TFS build servers
https://visualstudio.uservoice.com/forums/330519-visual-studio-team-services/suggestions/3853614-allow-test-playlists-to-be-used-by-tfs-build-serve
As a workaround, you could use .orderedtest instead of .playlist.
Ordered tests can be created and edited in VS2013 and later. The format is otherwise similar to .playlist but it contains links to test GUIDs so its more complicated to modify programmatically.
TFS is able to run orderedtest in build pipeline, how to achieve this you could refer below links:
TFS - order of automata tests to execute
How to use Vnext build: ordered tests, distribute test, collect results
I created a build definition that runs automated tests using MTM build environments and test suites. I recently created a Visual Studio Load Test, which can be added to a test suite just like any test method marked with the [TestMethod] attribute. However, when I run the build, I get no errors and it appears the aggregate tests don't run. Is there a way to make this work?
I found this article: https://blogs.msdn.microsoft.com/testingspot/2013/01/22/how-to-automatically-run-a-load-test-as-part-of-a-build/ which describes a way to do it, but I can't find a build template that matches what he describes, and it appears this only allows you to run a single load test.
Also, when you configure a test controller, there is an option to configure it for load testing, but to do this, you must unregister it from the Team Project Collection. If this is done, it appears the controller can no longer be used in an environments to run project automated tests. This defeats the purpose of what I want to do and makes it seem that Load Tests and Team Projects are mutually exclusive. Is this the case? If so, this is a big oversight. Load tests are the kind of thing you would like to run automatically. Thanks for the help.
You are unfortunately right. A test controller used for load testing cannot be used for other automated test execution 'at the same time'. In your scenario I would recommend that you setup a different test controller and agent for load testing and you would be able to queue it as a part of your build to achieve what you are looking for.
There is no special build process template for this case.
I want to make sure that I can run my unit test developed using specflow-c# from MTM on my local machine.
Background info:
- Developed the unit test methods using SpecFlow-C#
- Checked in my project to TFS
Problem:
- Now can anyone guide me step by step, how to achieve the integration of this unit methods.
I have gone through various articles of the MSDN, but somehow i get lost in there.
I have learnt that i need to create a build defination (But how to?), setup test controller and test agent (Again how?).
Please guide me in this.
Thanks in advance.
MTM needs three things to execute tests:
A build with which to associate the test run. It can only read from TFS. If you're not using TFS for build/deployment you can run the TFSBuild.exe tool to create a dummy build in TFS to point MTM to.
A test lab in which to run the test. Install both the controller and agent on your local machine. Open the agent configuration tool and register it to the controller. Open the controller configuration tool and register it with TFS Team Project Collection. Once this is done, you should be able to see the controller when setting up the lab environment in MTM.
A test case in TFS which is associated with a unit test. As far as I know, this association must be made in Visual Studio. In Team Explorer, open up the work items. Find your test case and click on the Associated Automation tab. In the Test Name field you select a unit test method to tie to the testcase. This is the test that gets run when the testcase is executed in MTM.
I'm new to load testing in Visual Studio/MSTest, and I created a new Load Test recently to validate some high-traffic scenarios for a WCF service. I want to add this to the tests project for the service, but I don't want the test to be executed whenever I "Run All Tests in Solution" nor as part of our Continuous Integration build-verification process because a) it takes 5 minutes to run, and b) the service call that it is testing generates many thousands of email messages. Basically, I'd like to do the equivalent of adding the [Ignore] attribute to a unit test so that the load test is only executed when I explicitly choose to run it.
This MSDN Article ("How to: Disable and Enable Tests") suggests that the only to disable the test is to use Test Lists (.vsmdi files), but I don't have much experience with them, they seem like a hassle to manage, I don't want to have to modify our CI Build Definition, and this blog post says that Test Lists are deprecated in VS2012. Any other ideas?
Edit: I accepted Mauricio's answer, which was to put the load tests into a separate project and maintain separate solutions, one with the load tests and one without. This enables you to run the (faster-running) unit tests during development and also include the (slower-running) load tests during build verification without using test lists.
This should not be an issue for your CI Build Definition. Why?
To run unit tests as part of your build process you need to configure the build definition to point to a test container (usually a .dll file containint your test classes and methods). Load tests do not work this way, they are defined within .loadtest files (which are just xml files) that are consumed by the MSTest engine.
If you do not make any further changes to your CI Build definition the load test will be ignored.
If you want to run the test as part of a build, then you need to configure the build definition to use the .loadtest file.
Stay away from testlists. Like you said, they are being deprecated in VS11.
Edit: The simplest way to avoid running the load test as part of Visual Studio "Run All" tests is to create a different solution for your load tests.
Why don't you want to use Test Lists. I think is the best way to do that. Create different Test Lists for each test type (unit test, load test...) and then in your MSTest command run the Test List(s) you want:
MSTest \testmetadata:testlists.vsmdi \testlist:UnitTests (only UnitTests)
MSTest \testmetadata:testlists.vsmdi \testlist:LoadTests (only LoadTests)
MSTest \testmetadata:testlists.vsmdi \testlist:UnitTests \testlist:LoadTests (UnitTests & LoadTests)
I am working with an n-tiered architecture in Visual Studio 2008 (Developer Edition), and I have run into an issue.
We are running unit tests on every method of our services layer, and I am attempting to see the code coverage results, to ensure I'm hitting all the main paths through my methods.
When I attempt to view the results, I am informed that the test run did not have code coverage enabled. I tried editing the test run configuration through test -> edit test run configurations, only to discover that there were none found.
I have yet to discover how to create a test run configuration so that I can enable code coverage results.
How do I create the configuration?
Right-click the solution, choose Add, New item, choose Test run configuration in the resulting dialog. The only tricky part is that you don't get this choice unless you right-click the solution.