I'm trying to compile IRSTLM toolbox on my mac. I successfully run regenerate-makefiles.sh and ./configure but I get this error when executing make :
1 warning generated.
mv -f .deps/verify-caching.Tpo .deps/verify-caching.Po
/bin/sh ../libtool --tag=CXX --mode=link g++ -isystem/usr/include -W -Wall -ffor-scope -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DMYCODESIZE=3 -g -O2 -o verify-caching verify-caching.o -lirstlm -lz
libtool: link: g++ -isystem/usr/include -W -Wall -ffor-scope - D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DMYCODESIZE=3 -g -O2 -o .libs/verify-caching verify-caching.o -Wl,-bind_at_load /Users/alinejad/Downloads/irstlm- 5.80.08/trunk/src/.libs/libirstlm.dylib -lz
Making all in scripts
make[2]: Nothing to be done for `all'.
Making all in doc
make[2]: Nothing to be done for `all'.
make[2]: Nothing to be done for `all-am'.
I've already checked tab in 'all' command.
Related
I am getting the following error when I try to build gcc 8.2.0 on OpenBSD 6.3:
/bin/sh ./libtool --tag=CC --mode=compile /home/shane/gcc-8.2.0/host-i386-unknown-openbsd6.3/gcc/xgcc -B/home/shane/gcc-8.2.0/host-i386-unknown-openbsd6.3/gcc/ -B/opt/gcc-8.2.0/i386-unknown-openbsd6.3/bin/ -B/opt/gcc-8.2.0/i386-unknown-openbsd6.3/lib/ -isystem /opt/gcc-8.2.0/i386-unknown-openbsd6.3/include -isystem /opt/gcc-8.2.0/i386-unknown-openbsd6.3/sys-include -DHAVE_CONFIG_H -I../.././libatomic/config/x86 -I../.././libatomic/config/posix -I../.././libatomic -I. -march=i486 -mtune=i386 -fomit-frame-pointer -Wall -Werror -pthread -g -O2 -MT fence.lo -MD -MP -MF .deps/fence.Tpo -c -o fence.lo ../.././libatomic/fence.c
libtool: compile: /home/shane/gcc-8.2.0/host-i386-unknown-openbsd6.3/gcc/xgcc -B/home/shane/gcc-8.2.0/host-i386-unknown-openbsd6.3/gcc/ -B/opt/gcc-8.2.0/i386-unknown-openbsd6.3/bin/ -B/opt/gcc-8.2.0/i386-unknown-openbsd6.3/lib/ -isystem /opt/gcc-8.2.0/i386-unknown-openbsd6.3/include -isystem /opt/gcc-8.2.0/i386-unknown-openbsd6.3/sys-include -DHAVE_CONFIG_H -I../.././libatomic/config/x86 -I../.././libatomic/config/posix -I../.././libatomic -I. -march=i486 -mtune=i386 -fomit-frame-pointer -Wall -Werror -pthread -g -O2 -MT fence.lo -MD -MP -MF .deps/fence.Tpo -c ../.././libatomic/fence.c -fPIC -DPIC -o .libs/fence.o
../.././libatomic/fence.c:26:10: fatal error: stdatomic.h: No such file or directory
#include <stdatomic.h>
^~~~~~~~~~~~~
compilation terminated.
gmake[4]: *** [Makefile:491: fence.lo] Error 1
gmake[4]: Leaving directory '/home/shane/gcc-8.2.0/i386-unknown-openbsd6.3/libatomic'
gmake[3]: *** [Makefile:524: all-recursive] Error 1
gmake[3]: Leaving directory '/home/shane/gcc-8.2.0/i386-unknown openbsd6.3/libatomic'
gmake[2]: *** [Makefile:360: all] Error 2
gmake[2]: Leaving directory '/home/shane/gcc-8.2.0/i386-unknown-openbsd6.3/libatomic'
gmake[1]: *** [Makefile:21680: all-target-libatomic] Error 2
gmake[1]: Leaving directory '/home/shane/gcc-8.2.0'
gmake: *** [Makefile:943: all] Error 2
My process:
Install OpenBSD (using defaults)
Run syspatch
Add some packages:
# pkg_add wget
# pkg_add gmp mpfr libmpc
# pkg_add gmake
Get the source:
$ wget ftp://ftp.nluug.nl/mirror/languages/gcc/releases/gcc-8.2.0/gcc-8.2.0.tar.gz
$ tar xzf gcc-8.2.0.tar.gz
$ cd gcc-8.2.0
Build:
$ ./configure --prefix=/opt/gcc-8.2.0 --with-gmp=/usr/local --enable-languages=c,c++
$ gmake
This also fails with gcc 8.1.0 in a similar way.
I also tried using clang rather than gcc to build, like this:
$ CC=cc CXX=c++ ./configure --prefix=/opt/gcc-8.2.0 --with-gmp=/usr/local --enable-languages=c,c++
That made no difference, which makes some sense as apparently it is failing in stage 3 (gcc compiling itself again for a final check).
Annoyingly, there is a stdatomic.h file in the tarball:
$ find gcc-8.2.0 -name stdatomic.h
gcc-8.2.0/gcc/ginclude/stdatomic.h
So I have no idea what I am missing.
Has anyone successfully built this? How?
I am trying to build cmu pocketsphinx on my beaglebone black for speech recognition. I have downloaded the source code for sphinxbase and ran ./configure. Now, when I run 'make' I get the following errors:
Making all in src
make[1]: Entering directory `/home/root/Pocketsphinx/sphinxbase-0.8/src'
Making all in libsphinxbase
make[2]: Entering directory `/home/root/Pocketsphinx/sphinxbase-0.8/src/libsphinxbase'
Making all in util
make[3]: Entering directory `/home/root/Pocketsphinx/sphinxbase-0.8/src/libsphinxbase/util'
/bin/sh ../../../libtool --tag=CC --mode=compile gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../../../include -I../../../include/sphinxbase -I../../../include -I../../../include -I/usr/include/python2.7 -I/usr/include/python2.7 -g -O2 -Wall -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c -o bitvec.lo bitvec.c
libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../../../include -I../../../include/sphinxbase -I../../../include -I../../../include "-I/usr/include/python2.7" -I/usr/include/python2.7 -g -O2 -Wall -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c bitvec.c -fPIC -DPIC -o .libs/bitvec.o
gcc: error: -I/usr/include/python2.7: No such file or directory
make[3]: *** [bitvec.lo] Error 1
make[3]: Leaving directory `/home/root/Pocketsphinx/sphinxbase-0.8/src/libsphinxbase/util'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/root/Pocketsphinx/sphinxbase-0.8/src/libsphinxbase'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/root/Pocketsphinx/sphinxbase-0.8/src'
make: *** [all-recursive] Error 1
I have checked under /usr/include and I can see python2.7 folder there. But, in the above it says that gcc can not find the python2.7 directory. I am kind of lost. Any help would be appreciated.
Thanks
GCC is interpreting that argument as the name of a file to be compiled, not a -I option. I find it exceedingly odd that it's putting quotes around one of the arguments. My suspicion is that this is because one of the characters in that argument is not a standard ASCII character. For example maybe you've used a different dash character (not ASCII code 45 / hex 0x2d, but instead some other character code that shows up sort of like a dash).
For compatibility/legacy reasons I need to build the Lua compiler (luac) from version 5.0, on my 64bit Intel Mac. (5.1 or later can't be used.)
Dev tools installed through Xcode 4.6's Preferences window.
After I 'cd' in to the Lua directory, I issue the command 'make'.
cd include; make all
make[1]: Nothing to be done for `all'.
cd src; make all
make[1]: Nothing to be done for `all'.
cd src/lib; make all
make[1]: Nothing to be done for `all'.
cd src/luac; make all
gcc -o ../../bin/luac luac.o print.o lopcodes.o -L../../lib -llua -llualib -lm
Undefined symbols for architecture x86_64:
"_UNUSED", referenced from:
_writer in luac.o
ld: symbol(s) not found for architecture x86_64
collect2: ld returned 1 exit status
make[1]: *** [../../bin/luac] Error 1
make: *** [all] Error 2
I do not know how to configure the make process for x86_64. Could someone please step me through it?
Thanks.
It works for me, but the output below is different from yours:
...
cd src/luac; make all
gcc -O2 -Wall -I../../include -I.. -c -o luac.o luac.c
gcc -O2 -Wall -I../../include -I.. -c -o print.o print.c
gcc -o lopcodes.o -c -O2 -Wall -I../../include -I.. -DLUA_OPNAMES ../lopcodes.c
gcc -o ../../bin/luac luac.o print.o lopcodes.o -L../../lib -llua -llualib -lm
cd src/lua; make all
gcc -O2 -Wall -I../../include -c -o lua.o lua.c
Try make clean all at the top level first.
pranav#pranav-Inspiron-1545:~/dependency/tiff-3.8.2$ make
Making all in port
make[1]: Entering directory `/home/pranav/dependency/tiff-3.8.2/port'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/pranav/dependency/tiff-3.8.2/port'
Making all in libtiff
make[1]: Entering directory `/home/pranav/dependency/tiff-3.8.2/libtiff'
make all-am
make[2]: Entering directory `/home/pranav/dependency/tiff-3.8.2/libtiff'
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -g -O2 -Wall -W -MT tif_jpeg.lo -MD -MP -MF ".deps/tif_jpeg.Tpo" -c -o tif_jpeg.lo tif_jpeg.c; \
then mv -f ".deps/tif_jpeg.Tpo" ".deps/tif_jpeg.Plo"; else rm -f ".deps/tif_jpeg.Tpo"; exit 1; fi
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -g -O2 -Wall -W -MT tif_jpeg.lo -MD -MP -MF .deps/tif_jpeg.Tpo -c tif_jpeg.c -fPIC -DPIC -o .libs/tif_jpeg.o
In file included from /usr/local/include/jpeglib.h:27:0,
from tif_jpeg.c:87:
/usr/local/include/jmorecfg.h:263:16: error: expected identifier before numeric constant
tif_jpeg.c: In function 'JPEGVSetField':
tif_jpeg.c:1578:8: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
make[2]: *** [tif_jpeg.lo] Error 1
make[2]: Leaving directory `/home/pranav/dependency/tiff-3.8.2/libtiff'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/pranav/dependency/tiff-3.8.2/libtiff'
make: *** [all-recursive] Error 1
Edit file: /usr/local/include/jmorecfg.h
change line:
typedef enum { FALSE = 0 , TRUE = 1 } boolean;
to:
typedef enum { false= 0 , true= 1 } boolean;
Then, make successful.
I met this error when I compile for install emacs, and I don't think this is a perfect solution, my solution is change the source file which called jpeglib.h, before change:
# include <jpeglib.h>
after:
#define HAVE_BOOLEAN
typedef unsigned char boolean;
# include <jpeglib.h>
#undef HAVE_BOOLEAN
this solution work fine.
I'm trying to install cloog-ppl 0.15-11 in my 64 bit ubuntu 10.10. I get the following error during make. I guess it is wrt linking.
gcc -DHAVE_CONFIG_H -I. -I./include/cloog -I./include -I./include -Wall -fomit-frame-pointer -g -O2 -MT cloog.o -MD -MP -MF .deps/cloog.Tpo -c -o cloog.o `test -f 'source/cloog.c' || echo './'`source/cloog.c
mv -f .deps/cloog.Tpo .deps/cloog.Po
/bin/bash ./libtool --tag=CC --mode=link gcc -Wall -fomit-frame-pointer -g -O2 -o cloog cloog.o libcloog.la -lgmp -lppl_c -lppl -lgmpxx
libtool: link: gcc -Wall -fomit-frame-pointer -g -O2 -o .libs/cloog cloog.o ./.libs/libcloog.so /usr/lib/libgmp.so -lppl_c -lppl /usr/lib/libgmpxx.so
//usr/local/lib/libppl_c.so: undefined reference to `std::__detail::_List_node_base::_M_unhook()#GLIBCXX_3.4.15'
//usr/local/lib/libppl_c.so: undefined reference to `std::__detail::_List_node_base::_M_hook(std::__detail::_List_node_base*)#GLIBCXX_3.4.15'
//usr/local/lib/libppl_c.so: undefined reference to `std::__detail::_List_node_base::swap(std::__detail::_List_node_base&, std::__detail::_List_node_base&)#GLIBCXX_3.4.15'
//usr/local/lib/libppl_c.so: undefined reference to `std::__detail::_List_node_base::_M_transfer(std::__detail::_List_node_base*, std::__detail::_List_node_base*)#GLIBCXX_3.4.15'
collect2: ld returned 1 exit status
make[1]: *** [cloog] Error 1
make[1]: Leaving directory `/home/praveen/cloog-ppl-0.15.11'
make: *** [all-recursive] Error 1
Can some one help me out on this ?
I have the same problem that I worked for a whole day!! I have a hit, as least this bug disappeared.
When it refers to GLIBCXX_3.4.15 it means that you are using a g++ or gcc with the library not providing the functions or classes you need, very likely 4.4 or 4.5. I changed my g++ and gcc to 4.6 and the problem was solved. For some references, you can check out the following:
How standard lib linked by libstdc++.so.6
Notice: I only get libstdc++.so.5 in /usr/lib when I have g++-4.5 installed. I think libstdc++ is the library that g++ and gcc used.
for changing the compiler version in Linux, see the following link:
Upgrade your compiler
Hope it helps!