I'm trying to query the contents of a log file on a remote server, however, I can't seem to get it to work.
#!/bin/bash
while read line; do
echo "Do stuff to the file, line by line"
done < ( ssh -n user#server "cat /path/to/file" )
I get a syntax error at the first parenthesis. If I remove the parenthesis, I get a syntax error at the "-n" flag.
Everything works properly from the shell, so I'm assuming there is some behavior here that I'm not understanding correctly.
Thanks!
You need another < for the process substitution.
#!/bin/bash
while read line; do
echo "Do stuff to the file, line by line"
done < <( ssh -n user#server "cat /path/to/file" )
The first < specifies the input redirection. The <(...) construct is the process substitution, which is similar to command substitution, but treated the output of the enclosed command as a file, rather than a string.
Related
I have the following shell script. The purpose is to loop thru each line of the target file (whose path is the input parameter to the script) and do work against each line. Now, it seems only work with the very first line in the target file and stops after that line got processed. Is there anything wrong with my script?
#!/bin/bash
# SCRIPT: do.sh
# PURPOSE: loop thru the targets
FILENAME=$1
count=0
echo "proceed with $FILENAME"
while read LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done < $FILENAME
echo "\ntotal $count targets"
In do_work.sh, I run a couple of ssh commands.
The problem is that do_work.sh runs ssh commands and by default ssh reads from stdin which is your input file. As a result, you only see the first line processed, because the command consumes the rest of the file and your while loop terminates.
This happens not just for ssh, but for any command that reads stdin, including mplayer, ffmpeg, HandBrakeCLI, httpie, brew install, and more.
To prevent this, pass the -n option to your ssh command to make it read from /dev/null instead of stdin. Other commands have similar flags, or you can universally use < /dev/null.
A very simple and robust workaround is to change the file descriptor from which the read command receives input.
This is accomplished by two modifications: the -u argument to read, and the redirection operator for < $FILENAME.
In BASH, the default file descriptor values (i.e. values for -u in read) are:
0 = stdin
1 = stdout
2 = stderr
So just choose some other unused file descriptor, like 9 just for fun.
Thus, the following would be the workaround:
while read -u 9 LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done 9< $FILENAME
Notice the two modifications:
read becomes read -u 9
< $FILENAME becomes 9< $FILENAME
As a best practice, I do this for all while loops I write in BASH.
If you have nested loops using read, use a different file descriptor for each one (9,8,7,...).
More generally, a workaround which isn't specific to ssh is to redirect standard input for any command which might otherwise consume the while loop's input.
while read -r line; do
((count++))
echo "$count $line"
sh ./do_work.sh "$line" </dev/null
done < "$filename"
The addition of </dev/null is the crucial point here, though the corrected quoting is also somewhat important for robustness; see also When to wrap quotes around a shell variable?. You will want to use read -r unless you specifically require the slightly odd legacy behavior you get for backslashes in the input without -r. Finally, avoid upper case for your private variables.
Another workaround of sorts which is somewhat specific to ssh is to make sure any ssh command has its standard input tied up, e.g. by changing
ssh otherhost some commands here
to instead read the commands from a here document, which conveniently (for this particular scenario) ties up the standard input of ssh for the commands:
ssh otherhost <<'____HERE'
some commands here
____HERE
ssh -n option prevents checking the exit status of ssh when using HEREdoc while piping output to another program.
So use of /dev/null as stdin is preferred.
#!/bin/bash
while read ONELINE ; do
ssh ubuntu#host_xyz </dev/null <<EOF 2>&1 | filter_pgm
echo "Hi, $ONELINE. You come here often?"
process_response_pgm
EOF
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
echo "aborting loop"
exit ${PIPESTATUS[0]}
fi
done << input_list.txt
This was happening to me because I had set -e and a grep in a loop was returning with no output (which gives a non-zero error code).
I have the following shell script. The purpose is to loop thru each line of the target file (whose path is the input parameter to the script) and do work against each line. Now, it seems only work with the very first line in the target file and stops after that line got processed. Is there anything wrong with my script?
#!/bin/bash
# SCRIPT: do.sh
# PURPOSE: loop thru the targets
FILENAME=$1
count=0
echo "proceed with $FILENAME"
while read LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done < $FILENAME
echo "\ntotal $count targets"
In do_work.sh, I run a couple of ssh commands.
The problem is that do_work.sh runs ssh commands and by default ssh reads from stdin which is your input file. As a result, you only see the first line processed, because the command consumes the rest of the file and your while loop terminates.
This happens not just for ssh, but for any command that reads stdin, including mplayer, ffmpeg, HandBrakeCLI, httpie, brew install, and more.
To prevent this, pass the -n option to your ssh command to make it read from /dev/null instead of stdin. Other commands have similar flags, or you can universally use < /dev/null.
A very simple and robust workaround is to change the file descriptor from which the read command receives input.
This is accomplished by two modifications: the -u argument to read, and the redirection operator for < $FILENAME.
In BASH, the default file descriptor values (i.e. values for -u in read) are:
0 = stdin
1 = stdout
2 = stderr
So just choose some other unused file descriptor, like 9 just for fun.
Thus, the following would be the workaround:
while read -u 9 LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done 9< $FILENAME
Notice the two modifications:
read becomes read -u 9
< $FILENAME becomes 9< $FILENAME
As a best practice, I do this for all while loops I write in BASH.
If you have nested loops using read, use a different file descriptor for each one (9,8,7,...).
More generally, a workaround which isn't specific to ssh is to redirect standard input for any command which might otherwise consume the while loop's input.
while read -r line; do
((count++))
echo "$count $line"
sh ./do_work.sh "$line" </dev/null
done < "$filename"
The addition of </dev/null is the crucial point here, though the corrected quoting is also somewhat important for robustness; see also When to wrap quotes around a shell variable?. You will want to use read -r unless you specifically require the slightly odd legacy behavior you get for backslashes in the input without -r. Finally, avoid upper case for your private variables.
Another workaround of sorts which is somewhat specific to ssh is to make sure any ssh command has its standard input tied up, e.g. by changing
ssh otherhost some commands here
to instead read the commands from a here document, which conveniently (for this particular scenario) ties up the standard input of ssh for the commands:
ssh otherhost <<'____HERE'
some commands here
____HERE
ssh -n option prevents checking the exit status of ssh when using HEREdoc while piping output to another program.
So use of /dev/null as stdin is preferred.
#!/bin/bash
while read ONELINE ; do
ssh ubuntu#host_xyz </dev/null <<EOF 2>&1 | filter_pgm
echo "Hi, $ONELINE. You come here often?"
process_response_pgm
EOF
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
echo "aborting loop"
exit ${PIPESTATUS[0]}
fi
done << input_list.txt
This was happening to me because I had set -e and a grep in a loop was returning with no output (which gives a non-zero error code).
I have the following shell script. The purpose is to loop thru each line of the target file (whose path is the input parameter to the script) and do work against each line. Now, it seems only work with the very first line in the target file and stops after that line got processed. Is there anything wrong with my script?
#!/bin/bash
# SCRIPT: do.sh
# PURPOSE: loop thru the targets
FILENAME=$1
count=0
echo "proceed with $FILENAME"
while read LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done < $FILENAME
echo "\ntotal $count targets"
In do_work.sh, I run a couple of ssh commands.
The problem is that do_work.sh runs ssh commands and by default ssh reads from stdin which is your input file. As a result, you only see the first line processed, because the command consumes the rest of the file and your while loop terminates.
This happens not just for ssh, but for any command that reads stdin, including mplayer, ffmpeg, HandBrakeCLI, httpie, brew install, and more.
To prevent this, pass the -n option to your ssh command to make it read from /dev/null instead of stdin. Other commands have similar flags, or you can universally use < /dev/null.
A very simple and robust workaround is to change the file descriptor from which the read command receives input.
This is accomplished by two modifications: the -u argument to read, and the redirection operator for < $FILENAME.
In BASH, the default file descriptor values (i.e. values for -u in read) are:
0 = stdin
1 = stdout
2 = stderr
So just choose some other unused file descriptor, like 9 just for fun.
Thus, the following would be the workaround:
while read -u 9 LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done 9< $FILENAME
Notice the two modifications:
read becomes read -u 9
< $FILENAME becomes 9< $FILENAME
As a best practice, I do this for all while loops I write in BASH.
If you have nested loops using read, use a different file descriptor for each one (9,8,7,...).
More generally, a workaround which isn't specific to ssh is to redirect standard input for any command which might otherwise consume the while loop's input.
while read -r line; do
((count++))
echo "$count $line"
sh ./do_work.sh "$line" </dev/null
done < "$filename"
The addition of </dev/null is the crucial point here, though the corrected quoting is also somewhat important for robustness; see also When to wrap quotes around a shell variable?. You will want to use read -r unless you specifically require the slightly odd legacy behavior you get for backslashes in the input without -r. Finally, avoid upper case for your private variables.
Another workaround of sorts which is somewhat specific to ssh is to make sure any ssh command has its standard input tied up, e.g. by changing
ssh otherhost some commands here
to instead read the commands from a here document, which conveniently (for this particular scenario) ties up the standard input of ssh for the commands:
ssh otherhost <<'____HERE'
some commands here
____HERE
ssh -n option prevents checking the exit status of ssh when using HEREdoc while piping output to another program.
So use of /dev/null as stdin is preferred.
#!/bin/bash
while read ONELINE ; do
ssh ubuntu#host_xyz </dev/null <<EOF 2>&1 | filter_pgm
echo "Hi, $ONELINE. You come here often?"
process_response_pgm
EOF
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
echo "aborting loop"
exit ${PIPESTATUS[0]}
fi
done << input_list.txt
This was happening to me because I had set -e and a grep in a loop was returning with no output (which gives a non-zero error code).
I have the following shell script. The purpose is to loop thru each line of the target file (whose path is the input parameter to the script) and do work against each line. Now, it seems only work with the very first line in the target file and stops after that line got processed. Is there anything wrong with my script?
#!/bin/bash
# SCRIPT: do.sh
# PURPOSE: loop thru the targets
FILENAME=$1
count=0
echo "proceed with $FILENAME"
while read LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done < $FILENAME
echo "\ntotal $count targets"
In do_work.sh, I run a couple of ssh commands.
The problem is that do_work.sh runs ssh commands and by default ssh reads from stdin which is your input file. As a result, you only see the first line processed, because the command consumes the rest of the file and your while loop terminates.
This happens not just for ssh, but for any command that reads stdin, including mplayer, ffmpeg, HandBrakeCLI, httpie, brew install, and more.
To prevent this, pass the -n option to your ssh command to make it read from /dev/null instead of stdin. Other commands have similar flags, or you can universally use < /dev/null.
A very simple and robust workaround is to change the file descriptor from which the read command receives input.
This is accomplished by two modifications: the -u argument to read, and the redirection operator for < $FILENAME.
In BASH, the default file descriptor values (i.e. values for -u in read) are:
0 = stdin
1 = stdout
2 = stderr
So just choose some other unused file descriptor, like 9 just for fun.
Thus, the following would be the workaround:
while read -u 9 LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done 9< $FILENAME
Notice the two modifications:
read becomes read -u 9
< $FILENAME becomes 9< $FILENAME
As a best practice, I do this for all while loops I write in BASH.
If you have nested loops using read, use a different file descriptor for each one (9,8,7,...).
More generally, a workaround which isn't specific to ssh is to redirect standard input for any command which might otherwise consume the while loop's input.
while read -r line; do
((count++))
echo "$count $line"
sh ./do_work.sh "$line" </dev/null
done < "$filename"
The addition of </dev/null is the crucial point here, though the corrected quoting is also somewhat important for robustness; see also When to wrap quotes around a shell variable?. You will want to use read -r unless you specifically require the slightly odd legacy behavior you get for backslashes in the input without -r. Finally, avoid upper case for your private variables.
Another workaround of sorts which is somewhat specific to ssh is to make sure any ssh command has its standard input tied up, e.g. by changing
ssh otherhost some commands here
to instead read the commands from a here document, which conveniently (for this particular scenario) ties up the standard input of ssh for the commands:
ssh otherhost <<'____HERE'
some commands here
____HERE
ssh -n option prevents checking the exit status of ssh when using HEREdoc while piping output to another program.
So use of /dev/null as stdin is preferred.
#!/bin/bash
while read ONELINE ; do
ssh ubuntu#host_xyz </dev/null <<EOF 2>&1 | filter_pgm
echo "Hi, $ONELINE. You come here often?"
process_response_pgm
EOF
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
echo "aborting loop"
exit ${PIPESTATUS[0]}
fi
done << input_list.txt
This was happening to me because I had set -e and a grep in a loop was returning with no output (which gives a non-zero error code).
I have the following shell script. The purpose is to loop thru each line of the target file (whose path is the input parameter to the script) and do work against each line. Now, it seems only work with the very first line in the target file and stops after that line got processed. Is there anything wrong with my script?
#!/bin/bash
# SCRIPT: do.sh
# PURPOSE: loop thru the targets
FILENAME=$1
count=0
echo "proceed with $FILENAME"
while read LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done < $FILENAME
echo "\ntotal $count targets"
In do_work.sh, I run a couple of ssh commands.
The problem is that do_work.sh runs ssh commands and by default ssh reads from stdin which is your input file. As a result, you only see the first line processed, because the command consumes the rest of the file and your while loop terminates.
This happens not just for ssh, but for any command that reads stdin, including mplayer, ffmpeg, HandBrakeCLI, httpie, brew install, and more.
To prevent this, pass the -n option to your ssh command to make it read from /dev/null instead of stdin. Other commands have similar flags, or you can universally use < /dev/null.
A very simple and robust workaround is to change the file descriptor from which the read command receives input.
This is accomplished by two modifications: the -u argument to read, and the redirection operator for < $FILENAME.
In BASH, the default file descriptor values (i.e. values for -u in read) are:
0 = stdin
1 = stdout
2 = stderr
So just choose some other unused file descriptor, like 9 just for fun.
Thus, the following would be the workaround:
while read -u 9 LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done 9< $FILENAME
Notice the two modifications:
read becomes read -u 9
< $FILENAME becomes 9< $FILENAME
As a best practice, I do this for all while loops I write in BASH.
If you have nested loops using read, use a different file descriptor for each one (9,8,7,...).
More generally, a workaround which isn't specific to ssh is to redirect standard input for any command which might otherwise consume the while loop's input.
while read -r line; do
((count++))
echo "$count $line"
sh ./do_work.sh "$line" </dev/null
done < "$filename"
The addition of </dev/null is the crucial point here, though the corrected quoting is also somewhat important for robustness; see also When to wrap quotes around a shell variable?. You will want to use read -r unless you specifically require the slightly odd legacy behavior you get for backslashes in the input without -r. Finally, avoid upper case for your private variables.
Another workaround of sorts which is somewhat specific to ssh is to make sure any ssh command has its standard input tied up, e.g. by changing
ssh otherhost some commands here
to instead read the commands from a here document, which conveniently (for this particular scenario) ties up the standard input of ssh for the commands:
ssh otherhost <<'____HERE'
some commands here
____HERE
ssh -n option prevents checking the exit status of ssh when using HEREdoc while piping output to another program.
So use of /dev/null as stdin is preferred.
#!/bin/bash
while read ONELINE ; do
ssh ubuntu#host_xyz </dev/null <<EOF 2>&1 | filter_pgm
echo "Hi, $ONELINE. You come here often?"
process_response_pgm
EOF
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
echo "aborting loop"
exit ${PIPESTATUS[0]}
fi
done << input_list.txt
This was happening to me because I had set -e and a grep in a loop was returning with no output (which gives a non-zero error code).