I am currently trying to setup a load test that consists of 5 http requests.
1. POST to http://example.com/Confirm
This is the initial request where i send out the data, the response contains two hashes that i need to store for later use.
2. GET to http://example.com/Verify/${hash}
3. POST to http://example.com/Final/${hash}
In the final part, i have to post hash value from the 1st request to the url together with some other response data. I have tried using XPath extractor, though i get the following error no matter what i try:
ERROR - jmeter.util.XPathUtil: Type=Val=false Tol=false org.xml.sax.SAXParseException; lineNumber: 12; columnNumber: 58; The string "--" is not permitted within comments. jmeter.extractor.XPathExtractor: SAXException while processing (//Response[1]/WI_HASH) The string "--" is not permitted within comments.
Are there any other options for response parsing apart from the XPath/Regexp extractor?
In the XPath Extractor, Select the Use Tidy checkbox.
Related
When manually entering value in below parameters, it's working fine and showing a valid response.
Below post shows data when values are manually entered:
POST https://qatbagp523.unix.gsm1900.org/wcs/resources/store/11151/quoteHandler/syncQuote
POST data:
{
"opportunityId":"92456",
"quoteNumber":"54044"
}
[no cookies]
But same value captured from regular expression will not show valid response data
Below post data values captured from regular expression
POST https://qatbagp523.unix.gsm1900.org/wcs/resources/store/11151/quoteHandler/syncQuote
POST data:
{
"opportunityId":"92456",
"quoteNumber":"54044"
}
[no cookies]
Even same post data values but manually entered post data is showing valid response but regular expression captured post data is not showing valid response
I observed headers and other valuesm there is no change, could any please resolve how to get response and what could be the cause for this type of issues
Given you send the same requests you should be getting the same responses, if you have different responses - most probably you're sending different requests
Compare 2 requests using View Results Tree listener, they should be exactly the same in terms of request body, request headers, etc.
Check the variable which is stored by the Regular Expression Extractor using Debug Sampler, it might the case there are extra spaces, line breaks, etc.
Use a third-party external sniffer tool like Wireshark or Fiddler as View Results Tree listener doesn't always tell the full story
If you won't be able to figure out the root cause of the issue - consider saving all the request and response data for both Samplers and update your question with the XML file containing these details.
I need to load test one Python api in below URL format:
//IP:PORT/Sub_Part/?where={"KEY1":"VALUE1","KEY2":"VALUE2","KEY3":"VALUE3"}
I tried to pass the key value pair through csv as well as directly in http request but getting error message.
java.net.URISyntaxException: Illegal character in query at index 47:
http://IP:PORT/Sub_Part/?where={"KEY1":"VALUE1","KEY2":"VALUE2","KEY3":"VALUE3"}
Here key and value are dummy data I have placed here for easy understanding.
Please help me with correct syntax for this URL.
Thanks in advance for all your help.
In REST APIs, JSON objects are typically sent (POST) or returned in the body of the request. They are not typically encoded as part of the URL.
For a GET request, you can either pass the information as segments in the url or as querystring parameters.
For more details refer here, How to send a GET request with a "/" in the query
As per HTML URL Encoding Reference:
URLs can only be sent over the Internet using the ASCII character-set.
so you need to define the request in JMeter's HTTP Request sampler as follows:
Pay attention to URL Encode? checkbox, it has to be ticked otherwise the parameter will be sent "as is"
Another option is using __urlencode() function like:
http://IP:PORT/Sub_Part/?where=${__urlencode({"KEY1":"VALUE1"\,"KEY2":"VALUE2"\,"KEY3":"VALUE3"})}
which will generate an encoded sequence which you could use in the URL path:
%7B%22KEY1%22%3A%22VALUE1%22%2C%22KEY2%22%3A%22VALUE2%22%2C%22KEY3%22%3A%22VALUE3%22%7D
as you can see, all non-ASCII characters where removed.
Check out Apache JMeter Functions - An Introduction to learn more about JMeter Functions concept.
I'm trying to extract the CSRF token so I can log in, and be able to obtain cookies, but I'm not able to.
I'm able to get a 200 response code when accessing the URL that contains the CSRF token, and I'm able to see it on the browser and the console, but my response assertion is not able to assert anything regardless of me changing the apply to, field to test, and pattern matching rules sections. My regular expression extractor isn't able to get anything either. All the headers to get to the URL are there. Any suggestions?
Forgot to mention, I'm able to get it on one server that's exactly (or should be) exactly the same as this one...
EDIT:
I placed it under the HTTP Sampler that has that response, and here is an example of what I get for my response assertion. I've also added various images.
Unfortunately you didn't share your output, so I cannot tell for sure, but although it seems your RegEx is correct in both cases, it could be that it doesn't match due to some extra spacing.
It appears that you are expecting a valid JSON, so instead of RegEx you could use JSON Extractor and/or JSON Assertion, for which extra spacing will not matter.
Example: if Response Data is
{"token":"12345"}
I can specify JSON Extractor as
(most important line is JSON Path: $.token)
and the result will be variable token with value 12345.
Here's a good online JSON Path tester, which can help you to figure out the right JSON Path.
If your goal is to check presence of a JSON Object with name of token and an arbitrary value I would recommend going for JSON Assertion instead.
Add JSON Assertion as a child of the request you would like to assert.
Use the following JSON Path query:
$.token
JSON Assertion is available since JMeter 4.0
If you still want to go for the Response Assertion - configure it as follows:
Pattern Matching Rules: Contains
Patterns to Test: {"token":"(.+?)"}
In jmeter: I’m using two http requests in one thread group, so I’m getting two response from those http requests.
I need ‘member id’ from one response and some string(digest) from other response, in order to create third http request.
I have extracted 'member id' by using this regular expression: {"Id":(.+?)}
which return me correct member id.
Response from 2nd request is string(digest) : "G9V6Su9PESaobcInErdD7Y8OKNo="
I added one more regular expression to extract this string : "(.+?)"
I have added two debug sampler as I'm using two regular expression extractor.
then I pass extracted values 'member id' and string(digest) as a parameter to third http request.
When I run it I'm getting error, my 3rd http request failed.
It's failing to pass extracted 'member ID', but its correctly pass string(digest)
In first debug sampler: its showing correct extracted 'Member ID' but some different values for digest field.
In 2nd debug sampler: its showing correct extracted 'digest' field but some different value for 'Member ID'.
I’m doing it all under one thread group
I'm new to jmeter, I don’t know whether it is possible to extract field from two different response and use as parameter to create new http request.
if it possible how to do it please help me.
Thanks in advance.
I believe that it's due to including quotation marks (and who knows what else) into the "Id" regular expression, you need to surround it with quotes like:
{"Id":"(.+?)"}
Also the better way of working with JSON data is JSON Path Extractor which is available via JMeter Plugins project. See Using the XPath Extractor in JMeter guide (scroll down to "Parsing JSON") for more information on installation, usage, syntax, etc.
I am new to jmeter. Can anyone help me to use a response object of one request to be passed as a request header of next HTTP request ?
Let me explain.
I am getting an access token along with the response of login in my app:
{: "responseCode":18, : "message":"Successfully logged in.", : "responseObject":"8zWExE4eSdhcJDwnW9MgIw=="}
No I want to use this access token (8zWExE4eSdhcJDwnW9MgIw) as one of the parameter of next request.
I used JSON Path Extractor for this.But its not working.
I am using JSON Path Extractor as well and it works great if it is properly configured.
Just put it into request and fill fields:
Variable Name: access_token (or any other you want to use later in request like this ${access_token})
JSON Path: responseObject should be enough if the JSON you pasted is full response (thjose additional colons are just some mistakes when copy-pasting or the JSON is corrupted?)
Default Value: I always use some value like 'NotUpdated!' here so I can assert in the next step or at least see it easily in request.
Not seeing the full response it is quote hard to come up with a correct JSON Path expression.
Given what you posted it should be something like $.responseObject
See JSON Path Syntax guide for queries syntax examples and Using the XPath Extractor in JMeter (scroll down to "Parsing JSON") for plugin installation instructions and XPath to JSON syntax mapping.
Just in case anybody would face an issue with multiple variable extractions using JSON Extractor (like me), make sure to:
List the names of variables/path expressions/default values using a semicolon as a separator.
Provide default values for every variable.
The second point is apparently required, and I only found out about it from this
Medium post.