I am trying to count the number of hairs transplanted in the following image. So practically, I have to count the number of spots I can find in the center of image.
(I've uploaded the inverted image of a bald scalp on which new hairs have been transplanted because the original image is bloody and absolutely disgusting! To see the original non-inverted image click here. To see the larger version of the inverted image just click on it). Is there any known image processing algorithm to detect these spots? I've found out that the Circle Hough Transform algorithm can be used to find circles in an image, I'm not sure if it's the best algorithm that can be applied to find the small spots in the following image though.
P.S. According to one of the answers, I tried to extract the spots using ImageJ, but the outcome was not satisfactory enough:
I opened the original non-inverted image (Warning! it's bloody and disgusting to see!).
Splited the channels (Image > Color > Split Channels). And selected the blue channel to continue with.
Applied Closing filter (Plugins > Fast Morphology > Morphological Filters) with these values: Operation: Closing, Element: Square, Radius: 2px
Applied White Top Hat filter (Plugins > Fast Morphology > Morphological Filters) with these values: Operation: White Top Hat, Element: Square, Radius: 17px
However I don't know what to do exactly after this step to count the transplanted spots as accurately as possible. I tried to use (Process > Find Maxima), but the result does not seem accurate enough to me (with these settings: Noise tolerance: 10, Output: Single Points, Excluding Edge Maxima, Light Background):
As you can see, some white spots have been ignored and some white areas which are not actually hair transplant spots, have been marked.
What set of filters do you advise to accurately find the spots? Using ImageJ seems a good option since it provides most of the filters we need. Feel free however, to advise what to do using other tools, libraries (like OpenCV), etc. Any help would be highly appreciated!
I do think you are trying to solve the problem in a bit wrong way. It might sound groundless, so I'd better show my results first.
Below I have a crop of you image on the left and discovered transplants on the right. Green color is used to highlight areas with more than one transplant.
The overall approach is very basic (will describe it later), but still it provides close to be accurate results. Please note, it was a first try, so there is a lot of room for enhancements.
Anyway, let's get back to the initial statement saying you approach is wrong. There are several major issues:
the quality of your image is awful
you say you want to find spots, but actually you are looking for hair transplant objects
you completely ignores the fact average head is far from being flat
it does look like you think filters will add some important details to your initial image
you expect algorithms to do magic for you
Let's review all these items one by one.
1. Image quality
It might be very obvious statement, but before the actual processing you need to make sure you have best possible initial data. You might spend weeks trying to find a way to process photos you have without any significant achievements. Here are some problematic areas:
I bet it is hard for you to "read" those crops, despite the fact you have the most advanced object recognition algorithms in your brain.
Also, your time is expensive and you still need best possible accuracy and stability. So, for any reasonable price try to get: proper contrast, sharp edges, better colors and color separation.
2. Better understanding of the objects to be identified
Generally speaking, you have a 3D objects to be identified. So you can analyze shadows in order to improve accuracy. BTW, it is almost like a Mars surface analysis :)
3. The form of the head should not be ignored
Because of the form of the head you have distortions. Again, in order to get proper accuracy those distortions should be corrected before the actual analysis. Basically, you need to flatten analyzed area.
3D model source
4. Filters might not help
Filters do not add information, but they can easily remove some important details. You've mentioned Hough transform, so here is interesting question: Find lines in shape
I will use this question as an example. Basically, you need to extract a geometry from a given picture. Lines in shape looks a bit complex, so you might decide to use skeletonization
All of a sadden, you have more complex geometry to deal with and virtually no chances to understand what actually was on the original picture.
5. Sorry, no magic here
Please be aware of the following:
You must try to get better data in order to achieve better accuracy and stability. The model itself is also very important.
Results explained
As I said, my approach is very simple: image was posterized and then I used very basic algorithm to identify areas with a specific color.
Posterization can be done in a more clever way, areas detection can be improved, etc. For this PoC I just have a simple rule to highlight areas with more than one implant. Having areas identified a bit more advanced analysis can be performed.
Anyway, better image quality will let you use even simple method and get proper results.
Finally
How did the clinic manage to get Yondu as client? :)
Update (tools and techniques)
Posterization - GIMP (default settings,min colors)
Transplant identification and visualization - Java program, no libraries or other dependencies
Having areas identified it is easy to find average size, then compare to other areas and mark significantly bigger areas as multiple transplants.
Basically, everything is done "by hand". Horizontal and vertical scan, intersections give areas. Vertical lines are sorted and used to restore the actual shape. Solution is homegrown, code is a bit ugly, so do not want to share it, sorry.
The idea is pretty obvious and well explained (at least I think so). Here is an additional example with different scan step used:
Yet another update
A small piece of code, developed to verify a very basic idea, evolved a bit, so now it can handle 4K video segmentation in real-time. The idea is the same: horizontal and vertical scans, areas defined by intersected lines, etc. Still no external libraries, just a lot of fun and a bit more optimized code.
Additional examples can be found on YouTube: RobotsCanSee
or follow the progress in Telegram: RobotsCanSee
I've just tested this solution using ImageJ, and it gave good preliminary result:
On the original image, for each channel
Small (radius 1 or 2) closing in order to get rid of the hairs (black part in the middle of the white one)
White top-hat of radius 5 in order to detect the white part around each black hair.
Small closing/opening in order to clean a little bit the image (you can also use a median filter)
Ultimate erode in order to count the number of white blob remaining. You can also certainly use a LoG (Laplacian of Gaussian) or a distance map.
[EDIT]
You don't detect all the white spots using the maxima function, because after the closing, some zones are flat, so the maxima is not a point, but a zone. At this point, I think that an ultimate opening or an ultimate eroded would give you the center or each white spot. But I am not sure that there is a function/pluggin doing it in ImageJ. You can take a look to Mamba or SMIL.
A H-maxima (after white top-hat) may also clean a little bit more your results and improve the contrast between the white spots.
As Renat mentioned, you should not expect algorithms to do magic for you, however I'm hopeful to come up with a reasonable estimate of the number of spots. Here, I'm going to give you some hints and resources, check them out and call me back if you need more information.
First, I'm kind of hopeful to morphological operations, but I think a perfect pre-processing step may push the accuracy yielded by them dramatically. I want you put my finger on the pre-processing step. Thus I'm going ti work with this image:
That's the idea:
Collect and concentrate the mass around the spot locations. What do I mean my concentrating the masses? Let's open the book from the other side: As you see, the provided image contains some salient spots surrounded by some noisy gray-level dots.
By dots, I mean the pixels that are not part of a spot, but their gray-value are larger than zero (pure black) - which are available around the spots. It is clear that if you clear these noisy dots, you surely will come up with a good estimate of spots using other processing tools such as morphological operations.
Now, how to make the image more sharp? What if we could make the dots to move forward to their nearest spots? This is what I mean by concentrating the masses over the spots. Doing so, only the prominent spots will be present in the image and hence we have made a significant step toward counting the prominent spots.
How to do the concentrating thing? Well, the idea that I just explained is available in this paper, which its code is luckily available. See the section 2.2. The main idea is to use a random walker to walk on the image for ever. The formulations is stated such that the walker will visit the prominent spots far more times and that can lead to identifying the prominent spots. The algorithm is modeled Markov chain and The equilibrium hitting times of the ergodic Markov chain holds the key for identifying the most salient spots.
What I described above is just a hint and you should read that short paper to get the detailed version of the idea. Let me know if you need more info or resources.
That is a pleasure to think on such interesting problems. Hope it helps.
You could do the following:
Threshold the image using cv::threshold
Find connected components using cv::findcontour
Reject the connected components of size larger than a certain size as you seem to be concerned about small circular regions only.
Count all the valid connected components.
Hopefully, you have a descent approximation of the actual number of spots.
To be statistically more accurate, you could repeat 1-4 for a range of thresholds and take the average.
This is what you get after applying unsharpen radius 22, amount 5, threshold 2 to your image.
This increases the contrast between the dots and the surrounding areas. I used the ballpark assumption that the dots are somewhere between 18 and 25 pixels in diameter.
Now you can take the local maxima of white as a "dot" and fill it in with a black circle until the circular neighborhood of the dot (a circle of radius 10-12) erases the dot. This should let you "pick off" the dots joined to each other in clusters more than 2. Then look for local maxima again. Rinse and repeat.
The actual "dot" areas are in stark contrast to the surrounding areas, so this should let you pick them off as well as you would by eyeballing it.
Related
I have a web cam that takes a picture every N seconds. This gives me a collection of images of the same scene over time. I want to process that collection of images as they are created to identify events like someone entering into the frame, or something else large happening. I will be comparing images that are adjacent in time and fixed in space - the same scene at different moments of time.
I want a reasonably sophisticated approach. For example, naive approaches fail for outdoor applications. If you count the number of pixels that change, for example, or the percentage of the picture that has a different color or grayscale value, that will give false positive reports every time the sun goes behind a cloud or the wind shakes a tree.
I want to be able to positively detect a truck parking in the scene, for example, while ignoring lighting changes from sun/cloud transitions, etc.
I've done a number of searches, and found a few survey papers (Radke et al, for example) but nothing that actually gives algorithms that I can put into a program I can write.
Use color spectroanalisys, without luminance: when the Sun goes down for a while, you will get similar result, colors does not change (too much).
Don't go for big changes, but quick changes. If the luminance of the image changes -10% during 10 min, it means the usual evening effect. But when the change is -5%, 0, +5% within seconds, its a quick change.
Don't forget to adjust the reference values.
Split the image to smaller regions. Then, when all the regions change same way, you know, it's a global change, like an eclypse or what, but if only one region's parameters are changing, then something happens there.
Use masks to create smart regions. If you're watching a street, filter out the sky, the trees (blown by wind), etc. You may set up different trigger values for different regions. The regions should overlap.
A special case of the region is the line. A line (a narrow region) contains less and more homogeneous pixels than a flat area. Mark, say, a green fence, it's easy to detect wheter someone crosses it, it makes bigger change in the line than in a flat area.
If you can, change the IRL world. Repaint the fence to a strange color to create a color spectrum, which can be identified easier. Paint tags to the floor and wall, which can be OCRed by the program, so you can detect wheter something hides it.
I believe you are looking for Template Matching
Also i would suggest you to look on to Open CV
We had to contend with many of these issues in our interactive installations. It's tough to not get false positives without being able to control some of your environment (sounds like you will have some degree of control). In the end we looked at combining some techniques and we created an open piece of software named OpenTSPS (Open Toolkit for Sensing People in Spaces - http://www.opentsps.com). You can look at the C++ source in github (https://github.com/labatrockwell/openTSPS/).
We use ‘progressive background relearn’ to adjust to the changing background over time. Progressive relearning is particularly useful in variable lighting conditions – e.g. if lighting in a space changes from day to night. This in combination with blob detection works pretty well and the only way we have found to improve is to use 3D cameras like the kinect which cast out IR and measure it.
There are other algorithms that might be relevant, like SURF (http://achuwilson.wordpress.com/2011/08/05/object-detection-using-surf-in-opencv-part-1/ and http://en.wikipedia.org/wiki/SURF) but I don't think it will help in your situation unless you know exactly the type of thing you are looking for in the image.
Sounds like a fun project. Best of luck.
The problem you are trying to solve is very interesting indeed!
I think that you would need to attack it in parts:
As you already pointed out, a sudden change in illumination can be problematic. This is an indicator that you probably need to achieve some sort of illumination-invariant representation of the images you are trying to analyze.
There are plenty of techniques lying around, one I have found very useful for illumination invariance (applied to face recognition) is DoG filtering (Difference of Gaussians)
The idea is that you first convert the image to gray-scale. Then you generate two blurred versions of this image by applying a gaussian filter, one a little bit more blurry than the first one. (you could use a 1.0 sigma and a 2.0 sigma in a gaussian filter respectively) Then you subtract from the less-blury image, the pixel intensities of the more-blurry image. This operation enhances edges and produces a similar image regardless of strong illumination intensity variations. These steps can be very easily performed using OpenCV (as others have stated). This technique has been applied and documented here.
This paper adds an extra step involving contrast equalization, In my experience this is only needed if you want to obtain "visible" images from the DoG operation (pixel values tend to be very low after the DoG filter and are veiwed as black rectangles onscreen), and performing a histogram equalization is an acceptable substitution if you want to be able to see the effect of the DoG filter.
Once you have illumination-invariant images you could focus on the detection part. If your problem can afford having a static camera that can be trained for a certain amount of time, then you could use a strategy similar to alarm motion detectors. Most of them work with an average thermal image - basically they record the average temperature of the "pixels" of a room view, and trigger an alarm when the heat signature varies greatly from one "frame" to the next. Here you wouldn't be working with temperatures, but with average, light-normalized pixel values. This would allow you to build up with time which areas of the image tend to have movement (e.g. the leaves of a tree in a windy environment), and which areas are fairly stable in the image. Then you could trigger an alarm when a large number of pixles already flagged as stable have a strong variation from one frame to the next one.
If you can't afford training your camera view, then I would suggest you take a look at the TLD tracker of Zdenek Kalal. His research is focused on object tracking with a single frame as training. You could probably use the semistatic view of the camera (with no foreign objects present) as a starting point for the tracker and flag a detection when the TLD tracker (a grid of points where local motion flow is estimated using the Lucas-Kanade algorithm) fails to track a large amount of gridpoints from one frame to the next. This scenario would probably allow even a panning camera to work as the algorithm is very resilient to motion disturbances.
Hope this pointers are of some help. Good Luck and enjoy the journey! =D
Use one of the standard measures like Mean Squared Error, for eg. to find out the difference between two consecutive images. If the MSE is beyond a certain threshold, you know that there is some motion.
Also read about Motion Estimation.
if you know that the image will remain reletivly static I would reccomend:
1) look into neural networks. you can use them to learn what defines someone within the image or what is a non-something in the image.
2) look into motion detection algorithms, they are used all over the place.
3) is you camera capable of thermal imaging? if so it may be worthwile to look for hotspots in the images. There may be existing algorithms to turn your webcam into a thermal imager.
I 'm trying to find an efficient way of acceptable complexity to
detect an object in an image so I can isolate it from its surroundings
segment that object to its sub-parts and label them so I can then fetch them at will
It's been 3 weeks since I entered the image processing world and I've read about so many algorithms (sift, snakes, more snakes, fourier-related, etc.), and heuristics that I don't know where to start and which one is "best" for what I'm trying to achieve. Having in mind that the image dataset in interest is a pretty large one, I don't even know if I should use some algorithm implemented in OpenCV or if I should implement one my own.
Summarize:
Which methodology should I focus on? Why?
Should I use OpenCV for that kind of stuff or is there some other 'better' alternative?
Thank you in advance.
EDIT -- More info regarding the datasets
Each dataset consists of 80K images of products sharing the same
concept e.g. t-shirts, watches, shoes
size
orientation (90% of them)
background (95% of them)
All pictures in each datasets look almost identical apart from the product itself, apparently. To make things a little more clear, let's consider only the 'watch dataset':
All the pictures in the set look almost exactly like this:
(again, apart form the watch itself). I want to extract the strap and the dial. The thing is that there are lots of different watch styles and therefore shapes. From what I've read so far, I think I need a template algorithm that allows bending and stretching so as to be able to match straps and dials of different styles.
Instead of creating three distinct templates (upper part of strap, lower part of strap, dial), it would be reasonable to create only one and segment it into 3 parts. That way, I would be confident enough that each part was detected with respect to each other as intended to e.g. the dial would not be detected below the lower part of the strap.
From all the algorithms/methodologies I've encountered, active shape|appearance model seem to be the most promising ones. Unfortunately, I haven't managed to find a descent implementation and I'm not confident enough that that's the best approach so as to go ahead and write one myself.
If anyone could point out what I should be really looking for (algorithm/heuristic/library/etc.), I would be more than grateful. If again you think my description was a bit vague, feel free to ask for a more detailed one.
From what you've said, here are a few things that pop up at first glance:
Simplest thing to do it binarize the image and do Connected Components using OpenCV or CvBlob library. For simple images with non-complex background this usually yeilds objects
HOwever, looking at your sample image, texture-based segmentation techniques may work better - the watch dial, the straps and the background are wisely variant in texture/roughness, and this could be an ideal way to separate them.
The roughness of a portion can be easily found by the Eigen transform (explained a bit on SO, check the link to the research paper provided there), then the Mean Shift filter can be applied on the output of the Eigen transform. This will give regions clearly separated according to texture. Both the pyramidal Mean Shift and finding eigenvalues by SVD are implemented in OpenCV, so unless you can optimize your own code its better (and easier) to use inbuilt functions (if present) as far as speed and efficiency is concerned.
I think I would turn the problem around. Instead of hunting for the dial, I would use a set of robust features from the watch to 'stitch' the target image onto a template. The first watch has a set of squares in the dial that are white, the second watch has a number of white circles. I would per type of watch:
Segment out the squares or circles in the dial. Segmentation steps can be tricky as they are usually both scale and light dependent
Estimate the centers or corners of the above found feature areas. These are the new feature points.
Use the Hungarian algorithm to match features between the template watch and the target watch. Alternatively, one can take the surroundings of each feature point in the original image and match these using cross correlation
Use matching features between the template and the target to estimate scaling, rotation and translation
Stitch the image
As the image is now in a known form, one can extract the regions simply via pre set coordinates
General: I'm hoping that the use-case I'm about to describe is a simple case of an optical flow problem and since I don't have much knowledge on the subject, I was wondering if anyone has any suggestions on how I can approach solving my problem.
Research I've already done: I have began reading the High Accuracy Optical Flow Estimation Based on a Theory for Warping paper and am planning on looking over the Particle Video paper. I have found a MATLAB High Accuracy Optical Flow implementation of optical flow. However, the papers (and the code) seem to describe concepts that are very involved and may require a lot of time for me to dig in and understand. I am hoping that the solution to my problem may be more simple.
Problem: I have a sequence of images. The images depict a material breakage process, where the material and background are black and the cracks are white. I am interested in traversing the sequence of images in reverse in an attempt to map all of the cracks that have formed in the breakage process to the first black image. You can think of the material as a large puzzle and I am trying to put the pieces back together in the reverse order that they broke.
In each image, there can be some cracks that are just emerging and/or some cracks that have been fully formed (and thus created a fragment). Throughout the breakage process, some fragments may separate and break further. The fragments can also move farther away from one another (the change is slight between subsequent frames).
Desired Output: All of the cracks/lines in the sequence mapped to the first image in the sequence.
Additional Notes: Images are available in grayscale format (i.e. original) as well as in binary format, where the cracks have been outlined in white and the background is completely black. See below for some image examples.
The top row shows the original images and the bottom row shows the binary images. As you can see, the crack that goes down the middle grows wider and wider as the image sequence progresses. Thus, the bottom crack moves together with the lower fragment. When traversing the sequence in reverse, I hope to algorithmically realize that the middle crack comes together as one (and map it correctly to the first image), and also map the bottom crack correctly, keeping its correct correspondence (size and position) with the bottom fragment.
A sequence typically contains about 30~40 images, so I've just shown the beginning subset. Also, although these images don't show it, it is possible that a particular image only contains the beginning of the crack (i.e. its initial appearance) and in subsequent images it gets longer and longer and may join with other cracks.
Language: Although not necessary, I would like to implement the solution using MATLAB (just because most of the other code that relates to the project has been done in MATLAB). However, if OpenCV may be easier, I am flexible in my language/library usage.
Any ideas are greatly appreciated.
Traverse forward rather than reverse, and don't use optical flow. Use the fracture lines to segment the black parts, track the centroid of each black segment over time. Whenever a new fracture line appears that cuts across a black segment, split the segment into two and continue tracking each segment separately.
From this you should be able to construct a tree structure representing the segmentation of the black parts over time. The fracture lines can be added as metadata to this tree, perhaps assigning fracture lines to the segment node in which they first appeared.
I would advise you to follow your initial idea of backtracking the cracks. Yo kind of know how the cracks look like so you can track all the points that belong to the crack. You just track all the white points with an optical flow tracker, start with Lukas-Kanade tracker and see where you get. The high-accuracy optical flow method is a global one and more general, I'll track all the pixels in the image trying to keep some smoothness everywhere. The LK is a local method that will just use a small window around each point to do the tracking. The problem is that appart from the cracks all the pixels are plain black so nothing to track there, you'll just waist time trying to track something that you can't track and you don't need to track.
If lines are very straight you might end up with what's called the aperture problem and you'll get inaccurate results. You can also try some shape fitting/deformation based on snakes.
I agree to damian. Most optical flow methods like the HAOF rely on the first-order taylor approximation of the intensity constancy constrian equation I(x,t)=I(x+v,t+dt). That mean the solution depends on image derivatives where the gradient determine the motion vector magnitude and angle i.e. you need a certain amount of texture. However the very low texture of your non-binarised images could be enough. You could try histogram equalization to increase the contrast of your input data but it is important to apply the same transformation for both input images. e.g. as follows:
cv::Mat equalizeMat(grayInp1.rows, grayInp1.cols * 2 , CV_8UC1);
grayInp1.copyTo(equalizeMat(cv::Rect(0,0,grayInp1.cols,grayInp1.rows)));
grayInp2.copyTo(equalizeMat(cv::Rect(grayInp1.cols,0,grayInp2.cols,grayInp2.rows)));
cv::equalizeHist(equalizeMat,equalizeMat);
equalizeMat(cv::Rect(0,0,grayInp1.cols,grayInp1.rows)).copyTo(grayInp1);
equalizeMat(cv::Rect(grayInp1.cols,0,grayInp2.cols,grayInp2.rows)).copyTo(grayInp2);
// estimate optical flow
I am thinking of implement a image processing based solution for industrial problem.
The image is consists of a Red rectangle. Inside that I will see a matrix of circles. The requirement is to count the number of circles under following constraints. (Real application : Count the number of bottles in a bottle casing. Any missing bottles???)
The time taken for the operation should be very low.
I need to detect the red rectangle as well. My objective is to count the
items in package and there are no
mechanism (sensors) to trigger the
camera. So camera will need to capture
the photos continuously but the
program should have a way to discard
the unnecessary images.
Processing should be realtime.
There may be a "noise" in image capturing. You may see ovals instead of circles.
My questions are as follows,
What is the best edge detection algorithm that matches with the given
scenario?
Are there any other mechanisms that I can use other than the edge
detection?
Is there a big impact between the language I use and the performance of
the system?
AHH - YOU HAVE NOW TOLD US THE BOTTLES ARE IN FIXED LOCATIONS!
IT IS AN INCREDIBLY EASIER PROBLEM.
All you have to do is look at each of the 12 spots and see if there is a black area there or not. Nothing could be easier.
You do not have to do any edge or shape detection AT ALL.
It's that easy.
You then pointed out that the box might be rotatated, things could be jiggled. That the box might be rotated a little (or even a lot, 0 to 360 each time) is very easily dealt with. The fact that the bottles are in "slots" (even if jiggled) massively changes the nature of the problem. You're main problem (which is easy) is waiting until each new red square (crate) is centered under the camera. I just realised you meant "matrix" literally and specifically in the sentence in your original questions. That changes everything totally, compared to finding a disordered jumble of circles. Finding whether or not a blob is "on" at one of 12 points, is a wildly different problem to "identifying circles in an image". Perhaps you could post an image to wrap up the question.
Finally I believe Kenny below has identified the best solution: blob analysis.
"Count the number of bottles in a bottle casing"...
Do the individual bottles sit in "slots"? ie, there are 4x3 = 12 holes, one for each bottle.
In other words, you "only" have to determine if there is, or is not, a bottle in each of the 12 holes.
Is that correct?
If so, your problem is incredibly easier than the more general problem of a pile of bottles "anywhere".
Quite simply, where do we see the bottles from? The top, sides, bottom, or? Do we always see the tops/bottoms, or are they mixed (ie, packed top-to-tail). These issues make huge, huge differences.
Surf/Sift = overkill in this case you certainly don't need it.
If you want real time speed (about 20fps+ on a 800x600 image) I recommend using Cuda to implement edge detection using a standard filter scheme like sobel, then implement binarization + image closure to make sure the edges of circles are not segmented apart.
The hardest part will be fitting circles. This is assuming you already got to the step where you have taken edges and made sure they are connected using image closure (morphology.) At this point I would proceed as follows:
run blob analysis/connected components to segment out circles that do not touch. If circles can touch the next step will be trickier
for each connected componet/blob fit a circle or rectangle using RANSAC which can run in realtime (as opposed to Hough Transform which I believe is very hard to run in real time.)
Step 2 will be much harder if you can not segment the connected components that form circles seperately, so some additional thought should be invested on how to guarantee that condition.
Good luck.
Edit
Having thought about it some more, I feel like RANSAC is ideal for the case where the circle connected components do touch. RANSAC should hypothetically fit the circle to only a part of the connected component (due to its ability to perform well in the case of mostly outlier points.) This means that you could add an extra check to see if the fitted circle encompasses the entire connected component and if it does not then rerun RANSAC on the portion of the connected component that was left out. Rinse and repeat as many times as necessary.
Also I realize that I say circle but you could just as easily fit an ellipse instead of circles using RANSAC.
Also, I'd like to comment that when I say CUDA is a good choice I mean CUDA is a good choice to implement the sobel filter + binirization + image closing on. Connected components and RANSAC are probably best left to the CPU, but you can try pushing them onto CUDA though I don't know how much of an advantage a GPU will give you for those 2 over a CPU.
For the circles, try the Hough transform.
other mechanisms: dunno
Compiled languages will possibly be faster.
SIFT should have a very good response to circular objects - it is patented, though. GLOHis a similar algorithm, but I do not know if there are any implementations readily available.
Actually, doing some more research, SURF is an improved version of SIFT with quite a few implementations available, check out the links on the wikipedia page.
Sum of colors + convex hull to detect boundary. You need, mostly, 4 corners of a rectangle, and not it's sides?
No motion, no second camera, a little choice - lot of math methods against a little input (color histograms, color distribution matrix). Dunno.
Java == high memory consumption, Lisp == high brain consumption, C++ == memory/cpu/speed/brain use optimum.
If the contrast is good, blob analysis is the algorithm for the job.
I'm trying to write a simple tracking routine to track some points on a movie.
Essentially I have a series of 100-frames-long movies, showing some bright spots on dark background.
I have ~100-150 spots per frame, and they move over the course of the movie. I would like to track them, so I'm looking for some efficient (but possibly not overkilling to implement) routine to do that.
A few more infos:
the spots are a few (es. 5x5) pixels in size
the movement are not big. A spot generally does not move more than 5-10 pixels from its original position. The movements are generally smooth.
the "shape" of these spots is generally fixed, they don't grow or shrink BUT they become less bright as the movie progresses.
the spots don't move in a particular direction. They can move right and then left and then right again
the user will select a region around each spot and then this region will be tracked, so I do not need to automatically find the points.
As the videos are b/w, I though I should rely on brigthness. For instance I thought I could move around the region and calculate the correlation of the region's area in the previous frame with that in the various positions in the next frame. I understand that this is a quite naïve solution, but do you think it may work? Does anyone know specific algorithms that do this? It doesn't need to be superfast, as long as it is accurate I'm happy.
Thank you
nico
Sounds like a job for Blob detection to me.
I would suggest the Pearson's product. Having a model (which could be any template image), you can measure the correlation of the template with any section of the frame.
The result is a probability factor which determine the correlation of the samples with the template one. It is especially applicable to 2D cases.
It has the advantage to be independent from the sample absolute value, since the result is dependent on the covariance related with the mean of the samples.
Once you detect an high probability, you can track the successive frames in the neightboor of the original position, and select the best correlation factor.
However, the size and the rotation of the template matter, but this is not the case as I can understand. You can customize the detection with any shape since the template image could represent any configuration.
Here is a single pass algorithm implementation , that I've used and works correctly.
This has got to be a well reasearched topic and I suspect there won't be any 100% accurate solution.
Some links which might be of use:
Learning patterns of activity using real-time tracking. A paper by two guys from MIT.
Kalman Filter. Especially the Computer Vision part.
Motion Tracker. A student project, which also has code and sample videos I believe.
Of course, this might be overkill for you, but hope it helps giving you other leads.
Simple is good. I'd start doing something like:
1) over a small rectangle, that surrounds a spot:
2) apply a weighted average of all the pixel coordinates in the area
3) call the averaged X and Y values the objects position
4) while scanning these pixels, do something to approximate the bounding box size
5) repeat next frame with a slightly enlarged bounding box so you don't clip spot that moves
The weight for the average should go to zero for pixels below some threshold. Number 4 can be as simple as tracking the min/max position of anything brighter than the same threshold.
This will of course have issues with spots that overlap or cross paths. But for some reason I keep thinking you're tracking stars with some unknown camera motion, in which case this should be fine.
I'm afraid that blob tracking is not simple, not if you want to do it well.
Start with blob detection as genpfault says.
Now you have spots on every frame and you need to link them up. If the blobs are moving independently, you can use some sort of correspondence algorithm to link them up. See for instance http://server.cs.ucf.edu/~vision/papers/01359751.pdf.
Now you may have collisions. You can use mixture of gaussians to try to separate them, give up and let the tracks cross, use any other before-and-after information to resolve the collisions (e.g. if A and B collide and A is brighter before and will be brighter after, you can keep track of A; if A and B move along predictable trajectories, you can use that also).
Or you can collaborate with a lab that does this sort of stuff all the time.