Related
By default a rich edit control has a "3d" border. I draw a thin border around a rich edit control this way:
if (message == WM_NCPAINT)
{
RECT rc;
HDC hdc;
HPEN pen;
HBRUSH brush;
HGDIOBJ oldP, oldB;
POINT tl, br;
::GetWindowRect(hWnd, &rc);
hdc = ::GetDC(hWnd);
tl.x = rc.left;
tl.y = rc.top;
br.x = rc.right;
br.y = rc.bottom;
::ScreenToClient(hWnd, &tl);
::ScreenToClient(hWnd, &br);
pen = ::CreatePen(PS_SOLID, 1, RGB(255, 0, 0));
brush = (HBRUSH) ::GetStockObject(HOLLOW_BRUSH);
oldP = ::SelectObject(hdc, pen);
oldB = ::SelectObject(hdc, brush);
::Rectangle(hdc, tl.x, tl.y, br.x, br.y);
::SelectObject(hdc, oldP);
::SelectObject(hdc, oldB);
::DeleteObject(pen);
::ReleaseDC(hWnd, hdc);
return 0;
}
The border looks fine but the area under the old border is not redrawn. It looks like I have to redraw to whole content of the rich edit control. After that a text shouldn't be a litte bit cut from the bottom. Here you can see what I mean (the second rich edit control has custom border). How to achieve it ?
GetDC returns DC for client area. In this case you need GetWindowDC for the whole richedit window.
Either way, overriding border color in edit and rich-edit can be difficult, because you also have to handle scrollbar painting in WM_NCPAINT
Assuming you don't need vertical and/or horizontal scrollbar, use GetWindowDC as follows:
LRESULT CALLBACK RichEditProc(HWND hwnd, UINT msg, WPARAM wp, LPARAM lp,
UINT_PTR, DWORD_PTR)
{
static int border_thickness = 1;
switch(msg)
{
case WM_NCPAINT:
{
HDC hdc = GetWindowDC(hwnd);
RECT rc;
GetClientRect(hwnd, &rc);
rc.right += 2 * border_thickness + 1;
rc.bottom += 2 * border_thickness + 1;
HBRUSH hbrush = (HBRUSH)GetStockObject(NULL_BRUSH);
HPEN hpen = CreatePen(PS_SOLID, 2 * border_thickness, RGB(255, 0, 0));
HBRUSH oldbrush = (HBRUSH)SelectObject(hdc, hbrush);
HPEN oldpen = (HPEN)SelectObject(hdc, hpen);
Rectangle(hdc, rc.left, rc.top, rc.right, rc.bottom);
SelectObject(hdc, oldpen);
SelectObject(hdc, oldbrush);
DeleteObject(hpen);
DeleteObject(hbrush);
ReleaseDC(hwnd, hdc);
return 0;
}
case WM_NCCALCSIZE:
if(lp)
{
NCCALCSIZE_PARAMS* sz = (NCCALCSIZE_PARAMS*)lp;
InflateRect(&sz->rgrc[0], -border_thickness, -border_thickness);
return 0;
}
break;
case WM_NCDESTROY:
RemoveWindowSubclass(hwnd, RichEditProc, 0);
break;
}
return DefSubclassProc(hwnd, msg, wp, lp);
}
By default, WM_NCCALCSIZE is not called in subclass procedure, you have to call SetWindowPos with SWP_FRAMECHANGED
HWND hrichedit = CreateWindowEx(...);
SetWindowSubclass(hrichedit, RichEditProc, 0, 0);
SetWindowPos(hrichedit, NULL, 0, 0, 0, 0, SWP_NOMOVE | SWP_NOSIZE | SWP_FRAMECHANGED);
If you do need horizontal/vertical scrollbar, you might consider using a borderless richedit, then paint around the rich control in parent window's WM_PAINT procedure.
i'm sorry for what i did. i edited.
i'd like to use Fillrect on 32bit HBITMAP which is Created with CreateDIBSection
but i can't make rect visible in color that i want to.
(i Drawed a fillrect with CreateSolidBrush blue(RGB(0, 0, 255)) on 32bit HBITMAP(hdcbmp), but it doesn't appear blue.)
here is source code
is there anyway to show rect color that i want to?
sorry for my poor english.
void DrawAlphaBitmap(HWND hWnd, ULONG uWidth, ULONG uHeight)
{
BLENDFUNCTION bf;
HBITMAP hbitmap;
HBITMAP hOldBitmap;
BITMAPINFO bmi;
PVOID pvBits;
HDC hdcwnd = GetDC(hWnd);
HDC hdcbmp = CreateCompatibleDC(hdcwnd);
ZeroMemory(&bmi, sizeof(BITMAPINFO));
bmi.bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
bmi.bmiHeader.biWidth = uWidth;
bmi.bmiHeader.biHeight = uHeight;
bmi.bmiHeader.biPlanes = 1;
bmi.bmiHeader.biBitCount = 32;
bmi.bmiHeader.biCompression = BI_RGB;
bmi.bmiHeader.biSizeImage = bmi.bmiHeader.biWidth * bmi.bmiHeader.biHeight * 4;
hbitmap = CreateDIBSection(hdcbmp, &bmi, DIB_RGB_COLORS, &pvBits, NULL, 0x0);
hOldBitmap = (HBITMAP)SelectObject(hdcbmp, hbitmap);
bf.BlendOp = AC_SRC_OVER;
bf.BlendFlags = 0;
bf.SourceConstantAlpha = 0xff;
bf.AlphaFormat = AC_SRC_ALPHA;
RECT rc2 = { 100, 100, 200, 200 };
FillRect(hdcbmp, &rc2, CreateSolidBrush(RGB(0, 0, 255)));
AlphaBlend(hdcwnd, 0, 0, uWidth, uHeight, hdcbmp, 0, 0, uWidth, uHeight, bf);
SelectObject(hdcbmp, hOldBitmap);
DeleteObject(hbitmap);
DeleteDC(hdcbmp);
ReleaseDC(hWnd, hdcwnd);
}
From documentation for BLENDFUNCTION:
AlphaFormat:
This flag is set when the bitmap has an Alpha channel (that is, per-pixel alpha).
In this case, alpha channel is not set. CreateDIBSection initializes the alpha values to zero. When AC_SRC_ALPHA is set, AlphaBlend ignores pixels whose alpha value is zero. Modify your code as follows:
//bf.AlphaFormat = AC_SRC_ALPHA; <- remove
bf.AlphaFormat = 0; //replace with 0
Side note, you have resource leak in creation of HBRUSH handle. Change the code to
HBRUSH hbrush = CreateSolidBrush(RGB(0, 0, 255));
RECT rc2 = { 0, 0, w, h };
FillRect(memdc, &rc2, hbrush);
DeleteObject(hbrush);
Ideally, your function prototype should be void DrawAlphaBitmap(HDC hdc, ULONG uWidth, ULONG uHeight); so that HDC can be passed directly, for example from BeginPaint/EndPaint in WM_PAINT message.
I'm trying to load a bitmap to a window I created. The bitmap should be the background of the window (I want to add labels on it an a progress bar later on).
This is my code:
HINSTANCE hInst;
LRESULT CALLBACK WindProcedure(HWND hWnd, UINT Msg, WPARAM wParam, LPARAM lParam);
INT WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance,
LPSTR lpCmdLine, int nCmdShow)
{
WNDCLASSEX WndCls;
static WCHAR szAppName[] = L"BitmapIntro";
MSG Msg;
hInst = hInstance;
WndCls.cbSize = sizeof(WndCls);
WndCls.style = CS_OWNDC | CS_VREDRAW | CS_HREDRAW;
WndCls.lpfnWndProc = WindProcedure;
WndCls.cbClsExtra = 0;
WndCls.cbWndExtra = 0;
WndCls.hInstance = hInst;
WndCls.hIcon = LoadIcon(NULL, IDI_APPLICATION);
WndCls.hCursor = LoadCursor(NULL, IDC_ARROW);
WndCls.hbrBackground = (HBRUSH)GetStockObject(WHITE_BRUSH);
WndCls.lpszMenuName = NULL;
WndCls.lpszClassName = szAppName;
WndCls.hIconSm = LoadIcon(hInstance, IDI_APPLICATION);
RegisterClassEx(&WndCls);
CreateWindowEx(WS_EX_OVERLAPPEDWINDOW,
szAppName,
L"Bitmaps Fundamentals",
WS_OVERLAPPEDWINDOW | WS_VISIBLE,
CW_USEDEFAULT,
CW_USEDEFAULT,
CW_USEDEFAULT,
CW_USEDEFAULT,
NULL,
NULL,
hInstance,
NULL);
while (GetMessage(&Msg, NULL, 0, 0))
{
TranslateMessage(&Msg);
DispatchMessage(&Msg);
}
return static_cast<int>(Msg.wParam);
}
LRESULT CALLBACK WindProcedure(HWND hWnd, UINT Msg, WPARAM wParam, LPARAM lParam)
{
HDC hDC, MemDCExercising;
PAINTSTRUCT Ps;
HBITMAP bmpExercising;
switch (Msg)
{
case WM_DESTROY:
PostQuitMessage(WM_QUIT);
break;
case WM_PAINT:
hDC = BeginPaint(hWnd, &Ps);
// Load the bitmap from the resource
bmpExercising = LoadBitmap(hInst, MAKEINTRESOURCE(IDB_BITMAP3));
// Create a memory device compatible with the above DC variable
MemDCExercising = CreateCompatibleDC(hDC);
// Select the new bitmap
SelectObject(MemDCExercising, bmpExercising);
// Copy the bits from the memory DC into the current dc
BitBlt(hDC, 10, 10, 450, 400, MemDCExercising, 0, 0, SRCCOPY);
// Restore the old bitmap
DeleteDC(MemDCExercising);
DeleteObject(bmpExercising);
EndPaint(hWnd, &Ps);
break;
default:
return DefWindowProc(hWnd, Msg, wParam, lParam);
}
return 0;
}
The problem is, the PNG size is small compared to the window, so when the PNG opens, it only occupies the left high corner. How can I make it stretch to my window size or at least draw it over and over until it fills the window?
How can I make it stretch to my window size
Use StretchBlt() instead of BitBlt().
case WM_PAINT:
{
// Get the window dimensions
RECT r;
GetClientRect(hWnd, &r);
// Load the bitmap from the resource
HBITMAP bmpExercising = LoadBitmap(hInst, MAKEINTRESOURCE(IDB_BITMAP3));
// Get the bitmap dimensions
BITMAP bmp;
GetObject(bmpExercising, sizeof(BITMAP), &bmp);
PAINTSTRUCT Ps;
HDC hDC = BeginPaint(hWnd, &Ps);
// Create a memory device compatible with the above DC variable
HDC MemDCExercising = CreateCompatibleDC(hDC);
// Select the new bitmap
HBITMAP hOldBmp = SelectObject(MemDCExercising, bmpExercising);
// Copy the bits from the memory DC into the current dc
StretchBlt(hDC, 0, 0, r.right - r.left, r.bottom - r.top, MemDCExercising, 0, 0, bmp.bmWidth, bmp.bmHeight, SRCCOPY);
// Restore the old bitmap
SelectObject(MemDCExercising, hOldBmp);
// Destroy the memory device
DeleteDC(MemDCExercising);
// Destroy the bitmap
DeleteObject(bmpExercising);
EndPaint(hWnd, &Ps);
break;
}
or at least draw it over and over until it fills the window?
There are two different ways to handle that.
at startup, load the bitmap and create an HBRUSH around it using CreatePatternBrush(), and then assign that to the WNDCLASS::hbrBackground field when you register your window class. Let the OS draw the window background using the bitmap for you.
HBITMAP bmpExercising = LoadBitmap(hInst, MAKEINTRESOURCE(IDB_BITMAP3));
WndCls.hbrBackground = CreatePatternBrush(bmpExercising);
if you want to paint the bitmap manually, have your paint handler call BitBlt() in a couple of loops. You know the dimensions of the bitmap (which you can retrieve in code using GetObject() and the BITMAP structure), and you know the dimensions of the window (which you can retrieve in code using GetWindowRect() or GetClientRect()). So simply draw the same bitmap more than one time at different offsets as needed. Start by drawing it once in the top-left corner, then move right bitmap-width pixels and draw it again, repeating until you move past window-width pixels. Then move left back to 0 and move down bitmap-height pixels and repeat the whole width-line again, repeating until you move past window-height pixels.
case WM_PAINT:
{
// Get the window dimensions
RECT r;
GetClientRect(hWnd, &r);
// Load the bitmap from the resource
HBITMAP bmpExercising = LoadBitmap(hInst, MAKEINTRESOURCE(IDB_BITMAP3));
// Get the bitmap dimensions
BITMAP bmp;
GetObject(bmpExercising, sizeof(BITMAP), &bmp);
PAINTSTRUCT Ps;
HDC hDC = BeginPaint(hWnd, &Ps);
// Create a memory device compatible with the above DC variable
HDC MemDCExercising = CreateCompatibleDC(hDC);
// Select the new bitmap
HBITMAP hOldBmp = SelectObject(MemDCExercising, bmpExercising);
int width = r.right - r.left;
int height = r.bottom - r.top;
// Copy the bits from the memory DC into the current dc
for(int y = 0; y < height; y += bmp.bmHeight)
{
for(int x = 0; x < width; x += bmp.bmWidth)
{
BitBlt(hDC, x, y, bmp.bmWidth, bmp.bmHeight, MemDCExercising, 0, 0, SRCCOPY);
}
}
// Restore the old bitmap
SelectObject(MemDCExercising, hOldBmp);
// Destroy the memory device
DeleteDC(MemDCExercising);
// Destroy the bitmap
DeleteObject(bmpExercising);
EndPaint(hWnd, &Ps);
break;
}
Now, with that said, here are some additional notes:
you should not be loading the bitmap inside of your paint handler. Load it one time before creating the window, and then reuse the same HBITMAP for each paint operation until the window is destroyed, then free the bitmap.
LoadBitmap() is deprecated, you should be using LoadImage() instead, eg:
HBITMAP bmpExercising = (HBITMAP) LoadImage(hInst, MAKEINTRESOURCE(IDB_BITMAP3), IMAGE_BITMAP, 0, 0, LR_CREATEDIBSECTION);
you said "The bitmap should be the background of the window", so you should be drawing the bitmap in response to the WM_ERASEBKGND message instead of the WM_PAINT message.
case WM_ERASEBKGND:
{
HDC hDC = (HDC) wParam;
// draw the bitmap on hDC as needed...
return 1;
}
I need to draw a custom caption bar, where I draw the window caption by myself.
HDC hdc = GetWindowDC(hwnd);
if (hdc && prepareTitleBarDC(getWidth(), 27)) {
SetWindowText(hwnd, _T(""));
DefWindowProc(hwnd, WM_NCPAINT, wParam, lParam);
m_titleBar->setSize(getWidth(), 27);
m_titleBar->setBkColor(SkColorSetARGB(0x00, 0x00, 0x00, 0x00));
m_titleBar->paintEvent(m_pTitleBarDC);
FnSkBitmap::SaveSkBitmap(m_pTitleBarDC->canvas(), L"e:\\titlebar.bmp");
HDC hdcPaint = CreateCompatibleDC(hdc);
HBITMAP hbm = CreateCompatibleBitmap(hdc, getWidth(), 27);
SelectObject(hdcPaint, hbm);
FnSkBitmap::DrawSkBitmap(m_pTitleBarDC->bitmap(), hdcPaint);
BLENDFUNCTION bfn = {0};
bfn.BlendOp = AC_SRC_OVER;
bfn.BlendFlags = 0;
bfn.SourceConstantAlpha = 255;
bfn.AlphaFormat = AC_SRC_ALPHA;
AlphaBlend(hdc, 0, 0, getWidth(), 27, hdcPaint, 0, 0, getWidth(), 27, bfn);
}
ReleaseDC(hwnd, hdc);
return 0;
And use AlphaBlend to mix the standard frame with myself, but if I use SetWindowText(_T("")), then the title in Alt+Tab switcher gone.
I try to handle WM_GETTEXT message and return the caption string, but failed. How could I draw the caption text by myself but still make the title in alt+tab switcher?
Since you are already drawing a "custom caption bar" there is no reason to have it actually draw using the actual window's text
there are two ways to accomplish this, one using the traditional DrawCaption from Win9x Win32Api, the other is using the more fresher "theme api"
here is an example that uses both:
#include <Windows.h>
#include <Uxtheme.h>
#include <vssym32.h>
LRESULT CALLBACK WindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam);
const LPCWSTR WINDOW_CLASS = L"Test Window Class";
const LPCWSTR WINDOW_CAPTION = L"This is my test window";
const LPCWSTR CUSTOM_CAPTION = L"Custom Caption Text";
int WINAPI wWinMain(HINSTANCE hInstance, HINSTANCE, PWSTR pCmdLine, int nCmdShow)
{
WNDCLASSEX wndClassEx = {};
wndClassEx.lpszClassName = WINDOW_CLASS;
wndClassEx.hInstance = hInstance;
wndClassEx.lpfnWndProc = WindowProc;
wndClassEx.cbSize = sizeof(wndClassEx);
wndClassEx.hCursor = (HCURSOR) LoadImage(NULL, MAKEINTRESOURCE(IDC_ARROW), IMAGE_CURSOR, 0, 0, LR_SHARED | LR_DEFAULTSIZE);
wndClassEx.style = CS_DBLCLKS | CS_DROPSHADOW;
ATOM registeredClass = RegisterClassEx(&wndClassEx);
HWND hwnd = CreateWindowEx(
0,
WINDOW_CLASS,
WINDOW_CAPTION,
WS_SYSMENU,
200, 200, 500, 300,
NULL, // parent
NULL, // menu
hInstance,
NULL // extra
);
if (hwnd == NULL)
{
return 0;
}
ShowWindow(hwnd, nCmdShow);
MSG msg = {};
while (GetMessage(&msg, NULL, 0, 0))
{
TranslateMessage(&msg);
DispatchMessage(&msg);
}
return 0;
}
LRESULT CALLBACK WindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam)
{
switch (uMsg)
{
case WM_LBUTTONDBLCLK:
case WM_DESTROY:
PostQuitMessage(0);
return 0;
case WM_PAINT:
{
PAINTSTRUCT ps;
HDC hdc = BeginPaint(hwnd, &ps);
// fill the window with a color
HBRUSH hbrush = CreateSolidBrush(RGB(33, 33, 33));
FillRect(hdc, &ps.rcPaint, hbrush);
DeleteObject(hbrush);
// get a drawing area
RECT rect = {};
GetClientRect(hwnd, &rect);
rect.bottom = rect.top + GetSystemMetrics(SM_CYCAPTION) + GetSystemMetrics(SM_CYEDGE) * 2;
// draw a simple win9x style caption (switch out the window text while drawing)
SetWindowText(hwnd, CUSTOM_CAPTION);
DrawCaption(hwnd, hdc, &rect, DC_GRADIENT | DC_TEXT | DC_ACTIVE | DC_ICON);
SetWindowText(hwnd, WINDOW_CAPTION);
// use theme framework
HTHEME htheme = OpenThemeData(hwnd, L"Window");
// move downwards and then use new APIs for size
rect.top += rect.bottom + 20;
rect.bottom = rect.top + GetThemeSysSize(htheme, SM_CYSIZE) + GetThemeSysSize(htheme, SM_CXPADDEDBORDER) * 2;
// draw the background
DrawThemeBackground(htheme, hdc, WP_CAPTION, CS_ACTIVE, &rect, &ps.rcPaint);
// load the caption font and save the old one
LOGFONTW captionfont = {};
GetThemeSysFont(htheme, TMT_CAPTIONFONT, &captionfont);
HFONT newfont = CreateFontIndirect(&captionfont);
HGDIOBJ oldfont = SelectObject(hdc, newfont);
// center the font and draw
rect.top += GetThemeSysSize(htheme, SM_CXPADDEDBORDER);
DrawThemeTextEx(htheme, hdc, WP_CAPTION, CS_ACTIVE, CUSTOM_CAPTION, -1, DT_CENTER, &rect, NULL);
// cleanup fonts
SelectObject(hdc, oldfont);
DeleteObject(newfont);
// adjust draw location, load icon and draw
rect.left += GetThemeSysSize(htheme, SM_CXPADDEDBORDER) * 2;
rect.top += GetThemeSysSize(htheme, SM_CXPADDEDBORDER);
HICON icon = (HICON) LoadImage(NULL, MAKEINTRESOURCE(IDI_APPLICATION), IMAGE_ICON, 0, 0, LR_SHARED | LR_DEFAULTSIZE);
DrawIconEx(hdc, rect.left, rect.top, icon, GetSystemMetrics(SM_CXSMICON), GetSystemMetrics(SM_CYSMICON), 0, NULL, DI_NORMAL);
// close theme
CloseThemeData(htheme);
EndPaint(hwnd, &ps);
}
return 0;
}
return DefWindowProc(hwnd, uMsg, wParam, lParam);
}
the resulting window looks like:
You can see that the 2 "custom drawn" title bars display custom text, not the text on the window.
A quick glance at the code will tell you that attempting the theme window caption using a custom routine is a lot more difficult than the legacy. The trade off of course is that it gives you way more control. You'll also take note that I switch out the window text to make it display what I want when using the legacy method. Additionally you need to remember that the legacy method takes its queues on how to draw itself from the styles associated with the window, if your window style has no icon, it will not draw one even if you specify it...
Either of these techniques will accomplish your goal. If I switched this code around not to draw multiple title bars and get rid of the default one created by the window style the result would look like:
you can see here how the task switch still displays the actual window text, and my "custom" caption bar looks like the real deal...
good luck, i hope this helps -ck
on a side note: i am running Windows8 and am not sure why the caption drawing routines are ignoring my theme... perhaps i forgot a directive
I'm trying to create a launcher window with 5 "invisible" buttons that have a smaller partially transparent image centered inside them. The image inside changes depending on whether the user is hovering over the button. In this example the images are resources IDB_Website1 and IDB_Website2.
The images are in .png format. I'm using GDI+ and loading PNG files from resources with http://www.codeproject.com/Articles/3537/Loading-JPG-PNG-resources-using-GDI.
I've used BS_OWNERDRAW to handle the graphics of the button. The problem is that I don't know how to link the "PNG from resources" code to the parent's WM_DRAWITEM. With the current way I've done the code, I lose the transparency of the .png by going through HBITMAP.
Global variable:
HBITMAP globalpic;
Main wndproc:
case WM_CREATE:
{
HWND hwndButton = CreateWindow(TEXT("button"), NULL,
WS_CHILD | WS_VISIBLE | BS_OWNERDRAW,
190, 230, 260, 50, // <- the larger rect size
hWnd, (HMENU) HT_BUTTON1, hInst, NULL);
HTButton = (WNDPROC) SetWindowLong(hwndButton, GWL_WNDPROC, (LONG) ButtonProc);
}
case WM_DRAWITEM:
{
DRAWITEMSTRUCT* lpDrawItem = (DRAWITEMSTRUCT*)lParam;
HBITMAP hBmp;
HDC hdc = CreateCompatibleDC(NULL);
if (hovering) // <- mousehover detection, not included
{
gdi.CreateBM(IDB_Website2, _T("PNG"), hInst, hdc, 62, 100, 200, 40);
} else {
gdi.CreateBM(IDB_Website1, _T("PNG"), hInst, hdc, 62, 100, 200, 40);
}
hBmp = globalpic; // get the global var gdi.CreateBM created
DeleteDC(hdc);
BITMAP bm;
GetObject(hBmp, sizeof(bm), &bm);
HDC hMemDC = CreateCompatibleDC(NULL);
HBITMAP hOldBmp = (HBITMAP)SelectObject(hMemDC, hBmp);
StretchBlt (lpDrawItem->hDC,
lpDrawItem->rcItem.left + 30,
lpDrawItem->rcItem.top + 5,
200, <- the width of image
40, <- the height of image
hMemDC,
0, 0,
bm.bmWidth,
bm.bmHeight,
SRCCOPY);
SelectObject(hMemDC, hOldBmp);
DeleteDC(hMemDC);
DeleteObject(hBmp);
break;
}
class GDI's method CreateBM.
Currently, since I don't know of a better way, it sends the HBITMAP to the global variable globalpic. The problem is that by doing this, I lose transparency.
void CreateBM(UINT menuid, LPCTSTR pType, HMODULE hInst, HDC hdc, int x, int y, int w, int h)
{
CGdiPlusBitmapResource m_pBitmap;
m_pBitmap.Load(menuid, pType, hInst);
m_pBitmap.m_pBitmap->GetHBITMAP(RGB(255, 255, 0), &globalpic);
//m_pBitmap.m_pBitmap->GetHBITMAP(GetBkColor(hdc), &globalpic); // <- no-go either
}
Any way I could do this more directly? I feel that going through the HBITMAP route is completely unnecessary but I couldn't for the life of me figure out how I should do it.
Then again, if using the HBITMAP way is fine, any pointers on how I could make the color (I guess (RGB(255, 255, 0) ...?) transparent with the current implementation?
Answering to Hans:
I also have a GDI method like this, but it's unused at the moment because I couldn't get the image removed after drawing it (as is needed when hovering changes the image):
void Create(UINT menuid, LPCTSTR pType, HMODULE hInst, HDC hdc, int x, int y, int w, int h)
{
Graphics grpx(hdc);
ht_img = new CGdiPlusBitmapResource();
ht_img -> Load(menuid, pType, hInst);
grpx.DrawImage(*ht_img, x, y, w, h);
delete ht_img;
}