Related
I don't really know what am I supposed to do with it.
For each file in the /etc directory whose name starts with the o or l and the second letter and the second letter of the name is t or r, display its name, size and type ('file'/'directory'/'link'). Use: wildcard, for loop and conditional statement for the type.
#!/bin/bash
etc_dir=$(ls -a /etc/ | grep '^o|^l|^.t|^.r')
for file in $etc_dir
do
stat -c '%s-%n' "$file"
done
I was thinking about something like that but I have to use if statement.
You may reach the goal by using find command.
This will search through all subdirectories.
#!/bin/bash
_dir='/etc'
find "${_dir}" -name "[ol][tr]*" -exec stat -c '%s-%n' {} \; 2>/dev/null
To have control on searching in subdirectories, you may use -maxdepth flag, like in the below example it will search only the files and directories name in the /etc dir and don't go through the subdirectories.
#!/bin/bash
_dir='/etc'
find "${_dir}" -maxdepth 1 -name "[ol][tr]*" -exec stat -c '%s-%n' {} \; 2>/dev/null
You may also use -type f OR -type d parameters to filter finding only Files OR Directories accordingly (if needed).
#!/bin/bash
_dir='/etc'
find "${_dir}" -name "[ol][tr]*" -type f -exec stat -c '%s-%n' {} \; 2>/dev/null
Update #1
Due to your request in the comments, this is a long way but used for loop and if statement.
Note: I'd strongly recommend to review and practice the commands used in this script instead of just copy and pasting them to get the score ;)
#!/bin/bash
# Set the main directory path.
_mainDir='/etc'
# This will find all files in the $_mainDir (ignoring errors if any) and assign the file's path to the $_files variable.
_files=$(find "${_mainDir}" 2>/dev/null)
# In this for loop we will
# loop over all files
# identify the poor filename from the whole file path
# and IF the poor file name matches the statement then run & output the `stat` command on that file.
for _file in ${_files} ;do
_fileName=$(basename ${_file})
if [[ "${_fileName}" =~ ^[ol][tr].* ]] ;then
stat -c 'Size: %s , Type: %n ' "${_file}"
fi
done
exit 0
You should break-down you problems into multiple pieces and tackle them one by one.
First, try and build an expression that finds the right files. If you were to execute your regex expression in a shell:
ls -a /etc/ | grep '^o|^l|^.t|^.r'
You would immediately see that you don't get the right output. So the first step would be to understand how grep works and fix the expression to:
ls -a /etc/ | grep '^[ol][tr]*'
Then, you have the file name, and you need the size and a textual file type. The size is easy to obtain using a stat call.
But, you soon realize you cannot ask stat to provide a textual format of the file type with the -f switch, so you probably have to use an if clause to present that.
How about this:
shopt -s extglob
ls -dp /etc/#(o|l)#(t|r)* | grep -v '/$'
Explanation:
shopt extglob - enable extended globbing (https://www.google.com/search?q=bash+extglob)
ls -d - list directories names, not their content
ls -dp - and add / at the end of each directory name
#(o|l)#(t|r) - o or l once (#), and then t or r once
grep -v '/$' - remove all lines containing / at the end
Of course, Vab's find solution is better that this ls:
find /etc -maxdepth 1 -name "[ol][tr]*" -type f -exec stat {} \;
x=$(find . -name "*.txt")
echo $x
if I run the above piece of code in Bash shell, what I get is a string containing several file names separated by blank, not a list.
Of course, I can further separate them by blank to get a list, but I'm sure there is a better way to do it.
So what is the best way to loop through the results of a find command?
TL;DR: If you're just here for the most correct answer, you probably want my personal preference (see the bottom of this post):
# execute `process` once for each file
find . -name '*.txt' -exec process {} \;
If you have time, read through the rest to see several different ways and the problems with most of them.
The full answer:
The best way depends on what you want to do, but here are a few options. As long as no file or folder in the subtree has whitespace in its name, you can just loop over the files:
for i in $x; do # Not recommended, will break on whitespace
process "$i"
done
Marginally better, cut out the temporary variable x:
for i in $(find -name \*.txt); do # Not recommended, will break on whitespace
process "$i"
done
It is much better to glob when you can. White-space safe, for files in the current directory:
for i in *.txt; do # Whitespace-safe but not recursive.
process "$i"
done
By enabling the globstar option, you can glob all matching files in this directory and all subdirectories:
# Make sure globstar is enabled
shopt -s globstar
for i in **/*.txt; do # Whitespace-safe and recursive
process "$i"
done
In some cases, e.g. if the file names are already in a file, you may need to use read:
# IFS= makes sure it doesn't trim leading and trailing whitespace
# -r prevents interpretation of \ escapes.
while IFS= read -r line; do # Whitespace-safe EXCEPT newlines
process "$line"
done < filename
read can be used safely in combination with find by setting the delimiter appropriately:
find . -name '*.txt' -print0 |
while IFS= read -r -d '' line; do
process "$line"
done
For more complex searches, you will probably want to use find, either with its -exec option or with -print0 | xargs -0:
# execute `process` once for each file
find . -name \*.txt -exec process {} \;
# execute `process` once with all the files as arguments*:
find . -name \*.txt -exec process {} +
# using xargs*
find . -name \*.txt -print0 | xargs -0 process
# using xargs with arguments after each filename (implies one run per filename)
find . -name \*.txt -print0 | xargs -0 -I{} process {} argument
find can also cd into each file's directory before running a command by using -execdir instead of -exec, and can be made interactive (prompt before running the command for each file) using -ok instead of -exec (or -okdir instead of -execdir).
*: Technically, both find and xargs (by default) will run the command with as many arguments as they can fit on the command line, as many times as it takes to get through all the files. In practice, unless you have a very large number of files it won't matter, and if you exceed the length but need them all on the same command line, you're SOL find a different way.
What ever you do, don't use a for loop:
# Don't do this
for file in $(find . -name "*.txt")
do
…code using "$file"
done
Three reasons:
For the for loop to even start, the find must run to completion.
If a file name has any whitespace (including space, tab or newline) in it, it will be treated as two separate names.
Although now unlikely, you can overrun your command line buffer. Imagine if your command line buffer holds 32KB, and your for loop returns 40KB of text. That last 8KB will be dropped right off your for loop and you'll never know it.
Always use a while read construct:
find . -name "*.txt" -print0 | while read -d $'\0' file
do
…code using "$file"
done
The loop will execute while the find command is executing. Plus, this command will work even if a file name is returned with whitespace in it. And, you won't overflow your command line buffer.
The -print0 will use the NULL as a file separator instead of a newline and the -d $'\0' will use NULL as the separator while reading.
find . -name "*.txt"|while read fname; do
echo "$fname"
done
Note: this method and the (second) method shown by bmargulies are safe to use with white space in the file/folder names.
In order to also have the - somewhat exotic - case of newlines in the file/folder names covered, you will have to resort to the -exec predicate of find like this:
find . -name '*.txt' -exec echo "{}" \;
The {} is the placeholder for the found item and the \; is used to terminate the -exec predicate.
And for the sake of completeness let me add another variant - you gotta love the *nix ways for their versatility:
find . -name '*.txt' -print0|xargs -0 -n 1 echo
This would separate the printed items with a \0 character that isn't allowed in any of the file systems in file or folder names, to my knowledge, and therefore should cover all bases. xargs picks them up one by one then ...
Filenames can include spaces and even control characters. Spaces are (default) delimiters for shell expansion in bash and as a result of that x=$(find . -name "*.txt") from the question is not recommended at all. If find gets a filename with spaces e.g. "the file.txt" you will get 2 separated strings for processing, if you process x in a loop. You can improve this by changing delimiter (bash IFS Variable) e.g. to \r\n, but filenames can include control characters - so this is not a (completely) safe method.
From my point of view, there are 2 recommended (and safe) patterns for processing files:
1. Use for loop & filename expansion:
for file in ./*.txt; do
[[ ! -e $file ]] && continue # continue, if file does not exist
# single filename is in $file
echo "$file"
# your code here
done
2. Use find-read-while & process substitution
while IFS= read -r -d '' file; do
# single filename is in $file
echo "$file"
# your code here
done < <(find . -name "*.txt" -print0)
Remarks
on Pattern 1:
bash returns the search pattern ("*.txt") if no matching file is found - so the extra line "continue, if file does not exist" is needed. see Bash Manual, Filename Expansion
shell option nullglob can be used to avoid this extra line.
"If the failglob shell option is set, and no matches are found, an error message is printed and the command is not executed." (from Bash Manual above)
shell option globstar: "If set, the pattern ‘**’ used in a filename expansion context will match all files and zero or more directories and subdirectories. If the pattern is followed by a ‘/’, only directories and subdirectories match." see Bash Manual, Shopt Builtin
other options for filename expansion: extglob, nocaseglob, dotglob & shell variable GLOBIGNORE
on Pattern 2:
filenames can contain blanks, tabs, spaces, newlines, ... to process filenames in a safe way, find with -print0 is used: filename is printed with all control characters & terminated with NUL. see also Gnu Findutils Manpage, Unsafe File Name Handling, safe File Name Handling, unusual characters in filenames. See David A. Wheeler below for detailed discussion of this topic.
There are some possible patterns to process find results in a while loop. Others (kevin, David W.) have shown how to do this using pipes:
files_found=1
find . -name "*.txt" -print0 |
while IFS= read -r -d '' file; do
# single filename in $file
echo "$file"
files_found=0 # not working example
# your code here
done
[[ $files_found -eq 0 ]] && echo "files found" || echo "no files found"
When you try this piece of code, you will see, that it does not work: files_found is always "true" & the code will always echo "no files found". Reason is: each command of a pipeline is executed in a separate subshell, so the changed variable inside the loop (separate subshell) does not change the variable in the main shell script. This is why I recommend using process substitution as the "better", more useful, more general pattern.See I set variables in a loop that's in a pipeline. Why do they disappear... (from Greg's Bash FAQ) for a detailed discussion on this topic.
Additional References & Sources:
Gnu Bash Manual, Pattern Matching
Filenames and Pathnames in Shell: How to do it Correctly, David A. Wheeler
Why you don't read lines with "for", Greg's Wiki
Why you shouldn't parse the output of ls(1), Greg's Wiki
Gnu Bash Manual, Process Substitution
(Updated to include #Socowi's execellent speed improvement)
With any $SHELL that supports it (dash/zsh/bash...):
find . -name "*.txt" -exec $SHELL -c '
for i in "$#" ; do
echo "$i"
done
' {} +
Done.
Original answer (shorter, but slower):
find . -name "*.txt" -exec $SHELL -c '
echo "$0"
' {} \;
If you can assume the file names don't contain newlines, you can read the output of find into a Bash array using the following command:
readarray -t x < <(find . -name '*.txt')
Note:
-t causes readarray to strip newlines.
It won't work if readarray is in a pipe, hence the process substitution.
readarray is available since Bash 4.
Bash 4.4 and up also supports the -d parameter for specifying the delimiter. Using the null character, instead of newline, to delimit the file names works also in the rare case that the file names contain newlines:
readarray -d '' x < <(find . -name '*.txt' -print0)
readarray can also be invoked as mapfile with the same options.
Reference: https://mywiki.wooledge.org/BashFAQ/005#Loading_lines_from_a_file_or_stream
# Doesn't handle whitespace
for x in `find . -name "*.txt" -print`; do
process_one $x
done
or
# Handles whitespace and newlines
find . -name "*.txt" -print0 | xargs -0 -n 1 process_one
I like to use find which is first assigned to variable and IFS switched to new line as follow:
FilesFound=$(find . -name "*.txt")
IFSbkp="$IFS"
IFS=$'\n'
counter=1;
for file in $FilesFound; do
echo "${counter}: ${file}"
let counter++;
done
IFS="$IFSbkp"
As commented by #Konrad Rudolph this will not work with "new lines" in file name. I still think it is handy as it covers most of the cases when you need to loop over command output.
As already posted on the top answer by Kevin, the best solution is to use a for loop with bash glob, but as bash glob is not recursive by default, this can be fixed by a bash recursive function:
#!/bin/bash
set -x
set -eu -o pipefail
all_files=();
function get_all_the_files()
{
directory="$1";
for item in "$directory"/* "$directory"/.[^.]*;
do
if [[ -d "$item" ]];
then
get_all_the_files "$item";
else
all_files+=("$item");
fi;
done;
}
get_all_the_files "/tmp";
for file_path in "${all_files[#]}"
do
printf 'My file is "%s"\n' "$file_path";
done;
Related questions:
Bash loop through directory including hidden file
Recursively list files from a given directory in Bash
ls command: how can I get a recursive full-path listing, one line per file?
List files recursively in Linux CLI with path relative to the current directory
Recursively List all directories and files
bash script, create array of all files in a directory
How can I creates array that contains the names of all the files in a folder?
How can I creates array that contains the names of all the files in a folder?
How to get the list of files in a directory in a shell script?
based on other answers and comment of #phk, using fd #3:
(which still allows to use stdin inside the loop)
while IFS= read -r f <&3; do
echo "$f"
done 3< <(find . -iname "*filename*")
You can put the filenames returned by find into an array like this:
array=()
while IFS= read -r -d ''; do
array+=("$REPLY")
done < <(find . -name '*.txt' -print0)
Now you can just loop through the array to access individual items and do whatever you want with them.
Note: It's white space safe.
You can store your find output in array if you wish to use the output later as:
array=($(find . -name "*.txt"))
Now to print the each element in new line, you can either use for loop iterating to all the elements of array, or you can use printf statement.
for i in ${array[#]};do echo $i; done
or
printf '%s\n' "${array[#]}"
You can also use:
for file in "`find . -name "*.txt"`"; do echo "$file"; done
This will print each filename in newline
To only print the find output in list form, you can use either of the following:
find . -name "*.txt" -print 2>/dev/null
or
find . -name "*.txt" -print | grep -v 'Permission denied'
This will remove error messages and only give the filename as output in new line.
If you wish to do something with the filenames, storing it in array is good, else there is no need to consume that space and you can directly print the output from find.
I think using this piece of code (piping the command after while done):
while read fname; do
echo "$fname"
done <<< "$(find . -name "*.txt")"
is better than this answer because while loop is executed in a subshell according to here, if you use this answer and variable changes cannot be seen after while loop if you want to modify variables inside the loop.
function loop_through(){
length_="$(find . -name '*.txt' | wc -l)"
length_="${length_#"${length_%%[![:space:]]*}"}"
length_="${length_%"${length_##*[![:space:]]}"}"
for i in {1..$length_}
do
x=$(find . -name '*.txt' | sort | head -$i | tail -1)
echo $x
done
}
To grab the length of the list of files for loop, I used the first command "wc -l".
That command is set to a variable.
Then, I need to remove the trailing white spaces from the variable so the for loop can read it.
find <path> -xdev -type f -name *.txt -exec ls -l {} \;
This will list the files and give details about attributes.
Another alternative is to not use bash, but call Python to do the heavy lifting. I recurred to this because bash solutions as my other answer were too slow.
With this solution, we build a bash array of files from inline Python script:
#!/bin/bash
set -eu -o pipefail
dsep=":" # directory_separator
base_directory=/tmp
all_files=()
all_files_string="$(python3 -c '#!/usr/bin/env python3
import os
import sys
dsep="'"$dsep"'"
base_directory="'"$base_directory"'"
def log(*args, **kwargs):
print(*args, file=sys.stderr, **kwargs)
def check_invalid_characther(file_path):
for thing in ("\\", "\n"):
if thing in file_path:
raise RuntimeError(f"It is not allowed {thing} on \"{file_path}\"!")
def absolute_path_to_relative(base_directory, file_path):
relative_path = os.path.commonprefix( [ base_directory, file_path ] )
relative_path = os.path.normpath( file_path.replace( relative_path, "" ) )
# if you use Windows Python, it accepts / instead of \\
# if you have \ on your files names, rename them or comment this
relative_path = relative_path.replace("\\", "/")
if relative_path.startswith( "/" ):
relative_path = relative_path[1:]
return relative_path
for directory, directories, files in os.walk(base_directory):
for file in files:
local_file_path = os.path.join(directory, file)
local_file_name = absolute_path_to_relative(base_directory, local_file_path)
log(f"local_file_name {local_file_name}.")
check_invalid_characther(local_file_name)
print(f"{base_directory}{dsep}{local_file_name}")
' | dos2unix)";
if [[ -n "$all_files_string" ]];
then
readarray -t temp <<< "$all_files_string";
all_files+=("${temp[#]}");
fi;
for item in "${all_files[#]}";
do
OLD_IFS="$IFS"; IFS="$dsep";
read -r base_directory local_file_name <<< "$item"; IFS="$OLD_IFS";
printf 'item "%s", base_directory "%s", local_file_name "%s".\n' \
"$item" \
"$base_directory" \
"$local_file_name";
done;
Related:
os.walk without hidden folders
How to do a recursive sub-folder search and return files in a list?
How to split a string into an array in Bash?
How about if you use grep instead of find?
ls | grep .txt$ > out.txt
Now you can read this file and the filenames are in the form of a list.
I need to get the first file in a folder which has the .tar.gz extension. I came up with:
FILE=/path/to/folder/$(ls /path/to/folder | grep ".tar.gz$" | head -1)
but I feel it can be done simpler and more elegant. Is there a better solution?
You could get all the files in an array, and then get the desired one:
files=( /path/to/folder/*.tar.gz )
Getting the first file:
echo "${files[0]}"
Getting the last file:
echo "${files[${#files[#]}-1]}"
You might want to set the shell option nullglob to handle cases when there are no matching files:
shopt -s nullglob
here is the shorter version from your own idea.
FILE=$(ls /path/to/folder/*.tar.gz| head -1)
You can use set as shown below. The shell will expand the wildcard and set will assign the files as positional parameters which can be accessed using $1, $2 etc.
# set nullglob so that if no matching files are found, the wildcard expands to a null string
shopt -s nullglob
set -- /path/to/folder/*.tar.gz
# print the name of the first file
echo "$1"
It is not good practice to parse ls as you are doing, because it will not handle filenames containing newline characters. Also, the grep is unnecessary because you could simply do ls /path/to/folder/*.tar.gz | head -1.
Here's a way to accomplish it:
for FILE in *.tar.gz; do break; done
You tell bash to break the loop in the first iteration, just when the first filename is assigned to FILE.
Another way to do the same:
first() { FILE=$1; } && first *.tar.gz
Here you are using the positional parameters of the function first which is better than set the positional parameters of your entire bash process (as with set --).
Here's a find based solution:
$ find . -maxdepth 1 -type f -iname "*.tar.gz" | head -1
where:
. is the current directory
-maxdepth 1 means only check the current directory
-type f means only look at files
-iname "*.tar.gz" means do a case-insensitive search for any file with the .tar.gz extension
| head -1 takes the results of find and only returns the first line
You could get rid of the | head -1 by doing something like:
$ find . -maxdepth 1 -type f -iname "*.tar.gz" -maxdepth 1 -print -quit
But I'm actually not sure how portable -print -quit is across environments (it works on MacOS and Ubuntu though).
I want to replace every occurence of string a2b3 with a6b7 in a directory containing several directories and files. If this string occurs in a file name replace it there as well.
I am able to replace it in files using following code
FILES=`find ./* -type f -name "xyz*"`
for file in $FILES
do
sed -i 's/a2b3/a6b7/' $file
done
what code should i add so that if it captures the same a2b3 string in file name of $file it should replace it there as well. Thanks !!
You can add:
for file in $FILES ; do
if [[ "$file" == *a2b3* ]] ; then
mv -- "$file" "${file/a2b3/a6b7}"
fi
done
Note that it's a bit dangerous to build a string named $FILES and expand it this way, since any asterisks or question-marks or square-brackets inside can trigger filename-expansion, and of course the whole concept is broken if any file-name contains whitespace. (For example, if you have files named a, b c, and *, and you set $FILES to 'a b c *', then your loop will iterate over a, b (file-not-found), c (file-not-found), a again, and finally b c; and it will never hit *.)
Edited to add for updated question:
Now that we know that you're setting $FILES by running FILES=`find ./* -type f -name "xyz*"`, we can modify the above to fix this issue. One approach is to use find's built-in ability to run arbitrary commands on the files it finds (instead of printing them out):
find -type f \
-name 'xyz*a2b3*' \
-execdir bash 'mv -- "$1" "${1/a2b3/a6b7}"' '{}' ';'
This fixes the case where a filename contains whitespace or filename-expansion metacharacters, and it also fixes the case where a directory contains a2b3.
Another approach is to tell find to separate filenames with null bytes (which can't appear in filenames), and pipe its output to a loop that reads the filenames and operates on them appropriately.
find -type f -name 'xyz*a2b3*' -print0 \
| while read -r -d '' ; do
mv -- "$REPLY" "${REPLY/a2b3/a6b7}"
done
x=$(find . -name "*.txt")
echo $x
if I run the above piece of code in Bash shell, what I get is a string containing several file names separated by blank, not a list.
Of course, I can further separate them by blank to get a list, but I'm sure there is a better way to do it.
So what is the best way to loop through the results of a find command?
TL;DR: If you're just here for the most correct answer, you probably want my personal preference (see the bottom of this post):
# execute `process` once for each file
find . -name '*.txt' -exec process {} \;
If you have time, read through the rest to see several different ways and the problems with most of them.
The full answer:
The best way depends on what you want to do, but here are a few options. As long as no file or folder in the subtree has whitespace in its name, you can just loop over the files:
for i in $x; do # Not recommended, will break on whitespace
process "$i"
done
Marginally better, cut out the temporary variable x:
for i in $(find -name \*.txt); do # Not recommended, will break on whitespace
process "$i"
done
It is much better to glob when you can. White-space safe, for files in the current directory:
for i in *.txt; do # Whitespace-safe but not recursive.
process "$i"
done
By enabling the globstar option, you can glob all matching files in this directory and all subdirectories:
# Make sure globstar is enabled
shopt -s globstar
for i in **/*.txt; do # Whitespace-safe and recursive
process "$i"
done
In some cases, e.g. if the file names are already in a file, you may need to use read:
# IFS= makes sure it doesn't trim leading and trailing whitespace
# -r prevents interpretation of \ escapes.
while IFS= read -r line; do # Whitespace-safe EXCEPT newlines
process "$line"
done < filename
read can be used safely in combination with find by setting the delimiter appropriately:
find . -name '*.txt' -print0 |
while IFS= read -r -d '' line; do
process "$line"
done
For more complex searches, you will probably want to use find, either with its -exec option or with -print0 | xargs -0:
# execute `process` once for each file
find . -name \*.txt -exec process {} \;
# execute `process` once with all the files as arguments*:
find . -name \*.txt -exec process {} +
# using xargs*
find . -name \*.txt -print0 | xargs -0 process
# using xargs with arguments after each filename (implies one run per filename)
find . -name \*.txt -print0 | xargs -0 -I{} process {} argument
find can also cd into each file's directory before running a command by using -execdir instead of -exec, and can be made interactive (prompt before running the command for each file) using -ok instead of -exec (or -okdir instead of -execdir).
*: Technically, both find and xargs (by default) will run the command with as many arguments as they can fit on the command line, as many times as it takes to get through all the files. In practice, unless you have a very large number of files it won't matter, and if you exceed the length but need them all on the same command line, you're SOL find a different way.
What ever you do, don't use a for loop:
# Don't do this
for file in $(find . -name "*.txt")
do
…code using "$file"
done
Three reasons:
For the for loop to even start, the find must run to completion.
If a file name has any whitespace (including space, tab or newline) in it, it will be treated as two separate names.
Although now unlikely, you can overrun your command line buffer. Imagine if your command line buffer holds 32KB, and your for loop returns 40KB of text. That last 8KB will be dropped right off your for loop and you'll never know it.
Always use a while read construct:
find . -name "*.txt" -print0 | while read -d $'\0' file
do
…code using "$file"
done
The loop will execute while the find command is executing. Plus, this command will work even if a file name is returned with whitespace in it. And, you won't overflow your command line buffer.
The -print0 will use the NULL as a file separator instead of a newline and the -d $'\0' will use NULL as the separator while reading.
find . -name "*.txt"|while read fname; do
echo "$fname"
done
Note: this method and the (second) method shown by bmargulies are safe to use with white space in the file/folder names.
In order to also have the - somewhat exotic - case of newlines in the file/folder names covered, you will have to resort to the -exec predicate of find like this:
find . -name '*.txt' -exec echo "{}" \;
The {} is the placeholder for the found item and the \; is used to terminate the -exec predicate.
And for the sake of completeness let me add another variant - you gotta love the *nix ways for their versatility:
find . -name '*.txt' -print0|xargs -0 -n 1 echo
This would separate the printed items with a \0 character that isn't allowed in any of the file systems in file or folder names, to my knowledge, and therefore should cover all bases. xargs picks them up one by one then ...
Filenames can include spaces and even control characters. Spaces are (default) delimiters for shell expansion in bash and as a result of that x=$(find . -name "*.txt") from the question is not recommended at all. If find gets a filename with spaces e.g. "the file.txt" you will get 2 separated strings for processing, if you process x in a loop. You can improve this by changing delimiter (bash IFS Variable) e.g. to \r\n, but filenames can include control characters - so this is not a (completely) safe method.
From my point of view, there are 2 recommended (and safe) patterns for processing files:
1. Use for loop & filename expansion:
for file in ./*.txt; do
[[ ! -e $file ]] && continue # continue, if file does not exist
# single filename is in $file
echo "$file"
# your code here
done
2. Use find-read-while & process substitution
while IFS= read -r -d '' file; do
# single filename is in $file
echo "$file"
# your code here
done < <(find . -name "*.txt" -print0)
Remarks
on Pattern 1:
bash returns the search pattern ("*.txt") if no matching file is found - so the extra line "continue, if file does not exist" is needed. see Bash Manual, Filename Expansion
shell option nullglob can be used to avoid this extra line.
"If the failglob shell option is set, and no matches are found, an error message is printed and the command is not executed." (from Bash Manual above)
shell option globstar: "If set, the pattern ‘**’ used in a filename expansion context will match all files and zero or more directories and subdirectories. If the pattern is followed by a ‘/’, only directories and subdirectories match." see Bash Manual, Shopt Builtin
other options for filename expansion: extglob, nocaseglob, dotglob & shell variable GLOBIGNORE
on Pattern 2:
filenames can contain blanks, tabs, spaces, newlines, ... to process filenames in a safe way, find with -print0 is used: filename is printed with all control characters & terminated with NUL. see also Gnu Findutils Manpage, Unsafe File Name Handling, safe File Name Handling, unusual characters in filenames. See David A. Wheeler below for detailed discussion of this topic.
There are some possible patterns to process find results in a while loop. Others (kevin, David W.) have shown how to do this using pipes:
files_found=1
find . -name "*.txt" -print0 |
while IFS= read -r -d '' file; do
# single filename in $file
echo "$file"
files_found=0 # not working example
# your code here
done
[[ $files_found -eq 0 ]] && echo "files found" || echo "no files found"
When you try this piece of code, you will see, that it does not work: files_found is always "true" & the code will always echo "no files found". Reason is: each command of a pipeline is executed in a separate subshell, so the changed variable inside the loop (separate subshell) does not change the variable in the main shell script. This is why I recommend using process substitution as the "better", more useful, more general pattern.See I set variables in a loop that's in a pipeline. Why do they disappear... (from Greg's Bash FAQ) for a detailed discussion on this topic.
Additional References & Sources:
Gnu Bash Manual, Pattern Matching
Filenames and Pathnames in Shell: How to do it Correctly, David A. Wheeler
Why you don't read lines with "for", Greg's Wiki
Why you shouldn't parse the output of ls(1), Greg's Wiki
Gnu Bash Manual, Process Substitution
(Updated to include #Socowi's execellent speed improvement)
With any $SHELL that supports it (dash/zsh/bash...):
find . -name "*.txt" -exec $SHELL -c '
for i in "$#" ; do
echo "$i"
done
' {} +
Done.
Original answer (shorter, but slower):
find . -name "*.txt" -exec $SHELL -c '
echo "$0"
' {} \;
If you can assume the file names don't contain newlines, you can read the output of find into a Bash array using the following command:
readarray -t x < <(find . -name '*.txt')
Note:
-t causes readarray to strip newlines.
It won't work if readarray is in a pipe, hence the process substitution.
readarray is available since Bash 4.
Bash 4.4 and up also supports the -d parameter for specifying the delimiter. Using the null character, instead of newline, to delimit the file names works also in the rare case that the file names contain newlines:
readarray -d '' x < <(find . -name '*.txt' -print0)
readarray can also be invoked as mapfile with the same options.
Reference: https://mywiki.wooledge.org/BashFAQ/005#Loading_lines_from_a_file_or_stream
# Doesn't handle whitespace
for x in `find . -name "*.txt" -print`; do
process_one $x
done
or
# Handles whitespace and newlines
find . -name "*.txt" -print0 | xargs -0 -n 1 process_one
I like to use find which is first assigned to variable and IFS switched to new line as follow:
FilesFound=$(find . -name "*.txt")
IFSbkp="$IFS"
IFS=$'\n'
counter=1;
for file in $FilesFound; do
echo "${counter}: ${file}"
let counter++;
done
IFS="$IFSbkp"
As commented by #Konrad Rudolph this will not work with "new lines" in file name. I still think it is handy as it covers most of the cases when you need to loop over command output.
As already posted on the top answer by Kevin, the best solution is to use a for loop with bash glob, but as bash glob is not recursive by default, this can be fixed by a bash recursive function:
#!/bin/bash
set -x
set -eu -o pipefail
all_files=();
function get_all_the_files()
{
directory="$1";
for item in "$directory"/* "$directory"/.[^.]*;
do
if [[ -d "$item" ]];
then
get_all_the_files "$item";
else
all_files+=("$item");
fi;
done;
}
get_all_the_files "/tmp";
for file_path in "${all_files[#]}"
do
printf 'My file is "%s"\n' "$file_path";
done;
Related questions:
Bash loop through directory including hidden file
Recursively list files from a given directory in Bash
ls command: how can I get a recursive full-path listing, one line per file?
List files recursively in Linux CLI with path relative to the current directory
Recursively List all directories and files
bash script, create array of all files in a directory
How can I creates array that contains the names of all the files in a folder?
How can I creates array that contains the names of all the files in a folder?
How to get the list of files in a directory in a shell script?
based on other answers and comment of #phk, using fd #3:
(which still allows to use stdin inside the loop)
while IFS= read -r f <&3; do
echo "$f"
done 3< <(find . -iname "*filename*")
You can put the filenames returned by find into an array like this:
array=()
while IFS= read -r -d ''; do
array+=("$REPLY")
done < <(find . -name '*.txt' -print0)
Now you can just loop through the array to access individual items and do whatever you want with them.
Note: It's white space safe.
I think using this piece of code (piping the command after while done):
while read fname; do
echo "$fname"
done <<< "$(find . -name "*.txt")"
is better than this answer because while loop is executed in a subshell according to here, if you use this answer and variable changes cannot be seen after while loop if you want to modify variables inside the loop.
You can store your find output in array if you wish to use the output later as:
array=($(find . -name "*.txt"))
Now to print the each element in new line, you can either use for loop iterating to all the elements of array, or you can use printf statement.
for i in ${array[#]};do echo $i; done
or
printf '%s\n' "${array[#]}"
You can also use:
for file in "`find . -name "*.txt"`"; do echo "$file"; done
This will print each filename in newline
To only print the find output in list form, you can use either of the following:
find . -name "*.txt" -print 2>/dev/null
or
find . -name "*.txt" -print | grep -v 'Permission denied'
This will remove error messages and only give the filename as output in new line.
If you wish to do something with the filenames, storing it in array is good, else there is no need to consume that space and you can directly print the output from find.
function loop_through(){
length_="$(find . -name '*.txt' | wc -l)"
length_="${length_#"${length_%%[![:space:]]*}"}"
length_="${length_%"${length_##*[![:space:]]}"}"
for i in {1..$length_}
do
x=$(find . -name '*.txt' | sort | head -$i | tail -1)
echo $x
done
}
To grab the length of the list of files for loop, I used the first command "wc -l".
That command is set to a variable.
Then, I need to remove the trailing white spaces from the variable so the for loop can read it.
find <path> -xdev -type f -name *.txt -exec ls -l {} \;
This will list the files and give details about attributes.
Another alternative is to not use bash, but call Python to do the heavy lifting. I recurred to this because bash solutions as my other answer were too slow.
With this solution, we build a bash array of files from inline Python script:
#!/bin/bash
set -eu -o pipefail
dsep=":" # directory_separator
base_directory=/tmp
all_files=()
all_files_string="$(python3 -c '#!/usr/bin/env python3
import os
import sys
dsep="'"$dsep"'"
base_directory="'"$base_directory"'"
def log(*args, **kwargs):
print(*args, file=sys.stderr, **kwargs)
def check_invalid_characther(file_path):
for thing in ("\\", "\n"):
if thing in file_path:
raise RuntimeError(f"It is not allowed {thing} on \"{file_path}\"!")
def absolute_path_to_relative(base_directory, file_path):
relative_path = os.path.commonprefix( [ base_directory, file_path ] )
relative_path = os.path.normpath( file_path.replace( relative_path, "" ) )
# if you use Windows Python, it accepts / instead of \\
# if you have \ on your files names, rename them or comment this
relative_path = relative_path.replace("\\", "/")
if relative_path.startswith( "/" ):
relative_path = relative_path[1:]
return relative_path
for directory, directories, files in os.walk(base_directory):
for file in files:
local_file_path = os.path.join(directory, file)
local_file_name = absolute_path_to_relative(base_directory, local_file_path)
log(f"local_file_name {local_file_name}.")
check_invalid_characther(local_file_name)
print(f"{base_directory}{dsep}{local_file_name}")
' | dos2unix)";
if [[ -n "$all_files_string" ]];
then
readarray -t temp <<< "$all_files_string";
all_files+=("${temp[#]}");
fi;
for item in "${all_files[#]}";
do
OLD_IFS="$IFS"; IFS="$dsep";
read -r base_directory local_file_name <<< "$item"; IFS="$OLD_IFS";
printf 'item "%s", base_directory "%s", local_file_name "%s".\n' \
"$item" \
"$base_directory" \
"$local_file_name";
done;
Related:
os.walk without hidden folders
How to do a recursive sub-folder search and return files in a list?
How to split a string into an array in Bash?
How about if you use grep instead of find?
ls | grep .txt$ > out.txt
Now you can read this file and the filenames are in the form of a list.