While debugging, how to step out form a loop (foreach, for, while) in PhpStorm like what you do to step out from a function (shift+f8)?
There isn't a single shortcut solution, but there is a simple workaround.
As stepping out of loop basically means you would execute the rest of the loop anyway, you can place the cursor after the loop and press Alt+F9 to move to its position. This way you can skip all the loop iterations you don't want to inspect anymore.
Set your next break point after loop and remove the break point in the loop and press F9
Related
Within Visual Studio, I can determine for the debug to stop at a breakpoint only after a specific number of times the program passes through it.
However, I can not find the same inside Pycharm.
Would anyone know how to do this?
Add a breakpoint at your desired position. Use hotkey ctrl,shift,F8 to open the "View Breakpoints" window. There you can mark the checkbox "condition".
In case you want to stop the program in a loop after 5 iterations, you can set the condition to target==5, where target is part of the loop as follows:
for target in object:
<your loop body>
and object is your iterable.
Is there a way to to step over the debugger to the cursor location?
In many occasions I want to skip a whole section of code while debugging, in that case I have to put a new breakpoint in the line I want to go to and click the continue execution button. I can't believe Xcode lacks the step over to cursor function.
Right-click on the line and select "Continue to Here".
If you move the cursor over the line number a little icon comes out that is a little play button That lets you run the code and stop at that selected line. Give that a try.
I know about basic features of visual studio debugging. F10, F11, Shift+F11, Ctrl+F10.
If I am inside a for loop is there a way of stopping right after the loop is completed?
Right now the way I am doing it is to manually go to the location after the loop and press Ctrl+F10. Is there a better way of doing this?
There is no dedicated "Step Out of Loop" command in Visual Studio. "Step Out" (Shift+F11) works only for functions. There are only two options that I can think of:
Like Brian suggests, there is Run to Cursor, which has been there at least since VC++ 6. This is what you're already getting with the Ctrl+F10 keyboard shortcut. I use this literally all the time while debugging; it's an extremely useful tool. I don't really understand why you think this is a lousy way of doing it, or why you think there should be a "better" way.
You could set a simple breakpoint on the line of code immediately following the loop. This is relatively simple if you use the keyboard shortcut F9. But you still have to navigate to the appropriate line of code, so you might as well use Run to Cursor.
If you're working in a C-derived language, your loops probably conclude with a }. So you could use the Ctrl+] keyboard shortcut to move to the matching brace in the source file if your caret is at the loop's opening brace. That might make navigation easier. It certainly can help avoid moving your hands over to the mouse, killing precious seconds.
* Note that keyboard combinations are subject to change, depending on how you have configured your Visual Studio environment.
I just found out that if you hover with your cursor at beginning of the desired line, VS automatically blends in a little play symbol. When you click on it, debugger jumps to this point.
Perhaps you would like to use a breakpoint, which can be used to trigger the debugger once your program has reached a specific line. You can set one by clicking on the left side of the code line, where errors and arrows usually show up during debugging. Hope this helps!
Simple way is to put a break statement in the for loop and add a condition. This will allow you to test the loop while debugging.
Is there a way in which I can debug my compiled Matlab components, using native Matlab debugger, like Visual Studio "Attach to process" option, or something like that?
I mean EXE stand-alone files, DLLs, COM in-process servers or .NET components.
You can't debug them in the sense of being able to step through the MATLAB code line by line, as you can with MATLAB's own debugger prior to compilation. One of the steps that the MATLAB deployment products take is to encrypt the MATLAB code (so you can preserve your IP when distributing the deployed component). The ability to step through the code in a debugger after deployment would defeat the purpose of that.
I experimented with using something like :
try
catch ME
waitbar(0,ME.message)
end
This was quite an effective and generic solution.
you may want to break down the code into multiple parts and debug each to save compiling time.
good luck,
dan
You can follow the instructions to debug:
Debugging:
Using the Debugging Tool will let you stop your program in mid-execution to examine the contents of variables and other things which can help you find mistakes in your program. M-file programs are stopped at "breakpoints". To create a breakpoint, simply press F12 and a red dot will appear next to the line where your cursor is. You can also click on the dash next to the line number on the left side of the M-file window to achieve the same result.
Then press F5 or Debug->Run from the menu to run the program. It will stop at the breakpoint with a green arrow next to it. You can then examine the contents of variables in the workspace, step, continue or stop your program using the Debug menu. To examine contents of a variable, simply type its name into the workspace, but be warned: you can only look at the values of variables in the file you stop in, so this means that you'll probably need multiple breakpoints to find the source of your problem. There are several different ways you can move through the program from a breakpoint. One way is to go through the whole program, line by line, entering every function that is called. This is effective if you don't know where the problem is. There's also a way to simply step through the function you're currently stopped in, one line at a time, and instead of going through the child functions line by line MATLAB will simply give you the results of those functions.
Finally, note that you cannot set a breakpoint until you save the M-file. If you change something, you must save before the breakpoint "notices" your changes. This situation is depicted in MATLAB by changing the dots from red to gray. Sometimes, you'll save but the dots will still be gray; this occurs when you have more than one breakpoint in multiple files. To get around this (which is really annoying), you have to keep going to "exit debug mode" until it turns gray. Once you're completely out of debug mode, your file will save and you'll be ready to start another round of debugging. Using comments to help you debug code. you want to test the effects of leaving out certain lines of code (to see, for example, if the program still returns Inf if you take them out), you can comment out the code. To do this, highlight it and then go to:
Text -> Comment
Or press CTRL+R. This will simply put a '%' in front of every line; if the line is already commented out it will put another '%' there so when you uncomment them the pattern of comment lines will not change. Commented lines will be ignored by the compiler, so the effect will be that the program is run without them.
To uncomment a line go to
Text -> Uncomment
Or press CTRL+T.
Another use of commenting is to test the difference between two different possible sets of code to do something (for example, you may want to test the effect of using ODE113 as opposed to ODE45 to solve a differential equation, so you'd have one line calling each). You can test the difference by commenting one out and running the program, then uncommenting that one and commenting the other one out, and calling the program again.
How to escape infinite loops?
MATLAB can't directly tell you you have an infinite loop, it does attempt to give you some hints. The first comes when you terminate the program. Terminate it by pressing CTRL+C and MATLAB will give you a message telling you exactly what line you stopped on. If your program is running a long time, it is likely the line you stopped in is in the middle of an infinite loop. sometimes MATLAB won't even let you return to the main window to press CTRL-C. In this case you probably have to kill the whole MATLAB process. After this, add a "pause (0.001)" or a similarly small value in the loop you suspect to be the infinite one. Whenever MATLAB passes this instruction you will be able to interact with MATLAB for a (very) short time, e.g. go to the main window and press CTRL-C with MATLAB being able to respond to your command.
Is there any way to tell the debugger to just continue until the next file is accessed, and/or until the next (developer written) function is accessed, without setting debug points ahead of time? I'm kind of new to VS debugging so all I use right now are f5, f10, and f11.
There is currently no way to do what you are asking. The main ways of telling VS to go until something happens are the following
Hit F5 and VS will go until the next user breakpoint or ,depending on your settings and where it occurs, the next exception is raised
Right click and select "Run to cursor"
Shift-F11 breaks out of the current method
Run to cursor doesn't require an explicit break point but it does require that you know where you want to break next.
You can right-click and select "run to cursor" if you just want to run to a specific line ahead in the execution stream.
Another one is Shift-F11 which finishes the current method and breaks again when you get back to the caller.
Actually, there is a way to set conditional break points.
Click in the left margin on the line where you want to break, as usual. (or F9)
Right-click on the red dot. In the context menu, click on "Condition...."
In the dialog, set your condition, e.g., fileName == "foo"
Hit F5 and go until the conditional break is hit.
Looks like there's not a way to do what I wanted to do