#!/bin/bash
if test $# -ne 2
then
echo "Error : Invalid number of arguments"
else
if [ -d $1 ]
then
if [[ $2 =~ ^[0-9]+$ ]]
then
ls -l $1 | while read line
do
eval "echo $line | cut -d' ' -f5" | while read ln
do
if [[ $ln -gt $2 ]]
then
echo $line
fi
done
done
else
echo $2" is not a integer"
fi
else
echo "The repertory "$1" does not exist "
fi
fi
The question was to make cpp , that works like the command cp . The script it's supposed to react correctly if we don't give 2 argument. I don't understand what this script do from line 10 .
This code is the following of this post Explain me 2 lines of this shell script.
Thanks
Without working through the code line by line and explaining it, I would point you at http://explainshell.com, which takes lines of shell code and puts commentary from the manual on each parameter.
E.g, this is part of line 12 above: http://explainshell.com/explain?cmd=echo+%24line+%7C+cut+-d%27+%27+-f5
It should help you go through it line by line and work out what is going on.
In words: It selects the lines from ls -l from a directory $1 which have a size bigger than $2.
If that code is in a file called script.sh, it is called like:
$ ./script.sh /home/user 130000
And it will print all lines of ls -l /home/user which have a size bigger than 130000.
I do not know why the eval in:
eval "echo $line | cut -d' ' -f5" | while read ln
The line will work the same as:
echo $line | cut -d' ' -f5 | while read ln
Related
I'm still new to the shell and need some help.
I have a file stapel_old.
Also I have in the same directory files like english_old_sync, math_old_sync and vocabulary_old_sync.
The content of stapel_old is:
english
math
vocabulary
The content of e.g. english is:
basic_grammar.md
spelling.md
orthography.md
I want to manipulate all files which are given in stapel_old like in this example:
take the first line of stapel_old 'english', (after that math, and so on)
convert in this case english to english_old_sync, (or after that what is given in second line, e.g. math to math_old_sync)
search in english_old_sync line by line for the pattern '.md'
And append to each line after .md :::#a1
The result should be e.g. of english_old_sync:
basic_grammar.md:::#a1
spelling.md:::#a1
orthography.md:::#a1
of math_old_sync:
geometry.md:::#a1
fractions.md:::#a1
and so on. stapel_old should stay unchanged.
How can I realize that?
I tried with sed -n, while loop (while read -r line), and I'm feeling it's somehow the right way - but I still get errors and not the expected result after 4 hours inspecting and reading.
Thank you!
EDIT
Here is the working code (The files are stored in folder 'olddata'):
clear
echo -e "$(tput setaf 1)$(tput setab 7)Learning directories:$(tput sgr 0)\n"
# put here directories which should not become flashcards, command: | grep -v 'name_of_directory_which_not_to_learn1' | grep -v 'directory2'
ls ../ | grep -v 00_gliederungsverweise | grep -v 0_weiter | grep -v bibliothek | grep -v notizen | grep -v Obsidian | grep -v z_nicht_uni | tee olddata/stapel_old
# count folders
echo -ne "\nHow much different folders: " && wc -l olddata/stapel_old | cut -d' ' -f1 | tee -a olddata/stapel_old
echo -e "Are this learning directories correct? [j ODER y]--> yes; [Other]-->no\n"
read lernvz_korrekt
if [ "$lernvz_korrekt" = j ] || [ "$lernvz_korrekt" = y ];
then
read -n 1 -s -r -p "Learning directories correct. Press any key to continue..."
else
read -n 1 -s -r -p "Learning directories not correct, please change in line 4. Press any key to continue..."
exit
fi
echo -e "\n_____________________________\n$(tput setaf 6)$(tput setab 5)Found cards:$(tput sgr 0)$(tput setaf 6)\n"
#GET && WRITE FOLDER NAMES into olddata/stapel_old
anzahl_zeilen=$(cat olddata/stapel_old |& tail -1)
#GET NAMES of .md files of every stapel and write All to 'stapelname'_old_sync
i=0
name="var_$i"
for (( num=1; num <= $anzahl_zeilen; num++ ))
do
i="$((i + 1))"
name="var_$i"
name=$(cat olddata/stapel_old | sed -n "$num"p)
find ../$name/ -name '*.md' | grep -v trash | grep -v Obsidian | rev | cut -d'/' -f1 | rev | tee olddata/$name"_old_sync"
done
(tput sgr 0)
I tried to add:
input="olddata/stapel_old"
while IFS= read -r line
do
sed -n "$line"p olddata/stapel_old
done < "$input"
The code to change only the english_old_sync is:
lines=$(wc -l olddata/english_old_sync | cut -d' ' -f1)
for ((num=1; num <= $lines; num++))
do
content=$(sed -n "$num"p olddata/english_old_sync)
sed -i "s/"$content"/""$content":::#a1/g"" olddata/english_old_sync
done
So now, this need to be a inner for-loop, of a outer for-loop which holds the variable for english, right?
stapel_old should stay unchanged.
You could try a while + read loop and embed sed inside the loop.
#!/usr/bin/env bash
while IFS= read -r files; do
echo cp -v "$files" "${files}_old_sync" &&
echo sed '/^.*\.md$/s/$/:::#a1/' "${files}_old_sync"
done < olddata/staple_old
convert in this case english to english_old_sync, (or after that what is given in second line, e.g. math to math_old_sync)
cp copies the file with a new name, if the goal is renaming the original file name from the content of the file staple_old then change cp to mv
The -n and -i flag from sed was ommited , include it, if needed.
The script also assumes that there are no empty/blank lines in the content of staple_old file. If in case there are/is add an addition test after the line where the do is.
[[ -n $files ]] || continue
It also assumes that the content of staple_old are existing files. Just in case add an additional test.
[[ -e $files ]] || { printf >&2 '%s no such file or directory.\n' "$files"; continue; }
Or an if statement.
if [[ ! -e $files ]]; then
printf >&2 '%s no such file or directory\n' "$files"
continue
fi
See also help test
See also help continue
Combining them all together should be something like:
#!/usr/bin/env bash
while IFS= read -r files; do
[[ -n $files ]] || continue
[[ -e $files ]] || {
printf >&2 '%s no such file or directory.\n' "$files"
continue
}
echo cp -v "$files" "${files}_old_sync" &&
echo sed '/^.*\.md$/s/$/:::#a1/' "${files}_old_sync"
done < olddata/staple_old
Remove the echo's If you're satisfied with the output so the script could copy/rename and edit the files.
I had problem with cut variables from string in " quotes. I have some scripts to write for my sys classes, I had a problem with a script in which I had to read input from the user in the form of (a="var1", b="var2")
I tried the code below
#!/bin/bash
read input
a=$($input | cut -d '"' -f3)
echo $a
it returns me a error "not found a command" on line 3 I tried to double brackets like
a=$(($input | cut -d '"' -f3)
but it's still wrong.
In a comment the OP gave a working answer (should post it as an answer):
#!/bin/bash
read input
a=$(echo $input | cut -d '"' -f2)
b=$(echo $input | cut -d '"' -f4)
echo sum: $(( a + b))
echo difference: $(( a - b))
This will work for user input that is exactly like a="8", b="5".
Never trust input.
You might want to add the check
if [[ ${input} =~ ^[a-z]+=\"[0-9]+\",\ [a-z]+=\"[0-9]+\"$ ]]; then
echo "Use your code"
else
echo "Incorrect input"
fi
And when you add a check, you might want to execute the input (after replacing the comma with a semicolon).
input='testa="8", testb="5"'
if [[ ${input} =~ ^[a-z]+=\"[0-9]+\",\ [a-z]+=\"[0-9]+\"$ ]];
then
eval $(tr "," ";" <<< ${input})
set | grep -E "^test[ab]="
else
echo no
fi
EDIT:
#PesaThe commented correctly about BASH_REMATCH:
When you use bash and a test on the input you can use
if [[ ${input} =~ ^[a-z]+=\"([0-9]+)\",\ [a-z]+=\"([0-9])+\"$ ]];
then
a="${BASH_REMATCH[1]}"
b="${BASH_REMATCH[2]}"
fi
To extract the digit 1 from a string "var1" you would use a Bash substring replacement most likely:
$ s="var1"
$ echo "${s//[^0-9]/}"
1
Or,
$ a="${s//[^0-9]/}"
$ echo "$a"
1
This works by replacing any non digits in a string with nothing. Which works in your example with a single number field in the string but may not be what you need if you have multiple number fields:
$ s2="1 and a 2 and 3"
$ echo "${s2//[^0-9]/}"
123
In this case, you would use sed or grep awk or a Bash regex to capture the individual number fields and keep them distinct:
$ echo "$s2" | grep -o -E '[[:digit:]]+'
1
2
3
I've got this code which reads an example file of /etc/passwd:
#!/bin/bash
OLDIFS=$IFS
IFS=$'\n'
while read linea resto
do
echo $linea
echo $resto
if [[ $(echo $linea | cut -d: -f6 | egrep -c 'al-03-04') == 1 ]]
then
finger $(cut -d: -f1) 2> fich
if [[ $(egrep -c fich) == 1 ]]
then
echo $(echo $linea | cut -d: -f1). Inactive user
else
echo $(echo $linea | cut -d: -f1). Active user
fi
fi
done < <(cat fichpasswd)
IFS=$OLDIFS
and this is the example file of /etc/passwd:
jfer:x:5214:1007:Javier Lopez,,,:/home/al-03-04/jfer:/bin/bash
jperez:x:10912:1009:Juan Perez,,,:/home/al-03-04/jperez:/bin/bash
mfernan:x:10913:1009:Manuel Fernandez,,,:/home/al-02-03/mfernan:/bin/bash
The problem is that the while loop only reads the first line, ignoring the others. The script's output is:
jfer:x:5214:1007:Javier Lopez,,,:/home/al-03-04/jfer:/bin/bash
jfer. Active user
You could try something like :
#!/bin/bash
FILE="test.txt"
while IFS=":" read -a data; do
echo "${data[#]}"
if [[ $(echo ${data[5]}|egrep -c 'al-03-04') -eq 1 ]]; then
if [[ $(finger "${data[0]}" 2>&1) =~ "no such user" ]]; then
echo "${data[0]}. Inactive user"
else
echo "${data[0]}. Active user"
fi
fi
done < "$FILE"
Here's the output :
ineumann ~ $ cat test.txt
ineumann:x:5214:1007:Javier Lopez,,,:/home/al-03-04/jfer:/bin/bash
jperez:x:10912:1009:Juan Perez,,,:/home/al-03-04/jperez:/bin/bash
mfernan:x:10913:1009:Manuel Fernandez,,,:/home/al-02-03/mfernan:/bin/bash
ineumann ~ $ ./test.sh
ineumann x 5214 1007 Javier Lopez,,, /home/al-03-04/jfer /bin/bash
ineumann. Active user
jperez x 10912 1009 Juan Perez,,, /home/al-03-04/jperez /bin/bash
jperez. Inactive user
mfernan x 10913 1009 Manuel Fernandez,,, /home/al-02-03/mfernan /bin/bash
A few comments on your script :
No need to use cat to read your file in a loop.
finger $(cut -d: -f1) 2> fich : cut need an input. And no need to use a temporary file to catch the output of finger (moreover this is not thread safe).
No need to use cut in your script when you choose the right IFS to split a line in multiple parts. In your case, I think the smartest choice would be :.
You can change the IFS only inside the loop with the syntax while IFS=':' read; do ...; done. No need to re-assign IFS with OLDIFS.
You can also use the while IFS=':' read var1 var2 var3 trash; do ...; done syntax to avoid to use an array with read -a (but I'd prefer to use an array as I wrote in my version of your script).
Working in a shell script here, trying to count the number of words/characters/lines in a file without using the wc command. I can get the file broken into lines and count those easy enough, but I'm struggling here to get the words and the characters.
#define word_count function
count_stuff(){
c=0
w=0
l=0
local f="$1"
while read Line
do
l=`expr $line + 1`
# now that I have a line I want to break it into words and characters???
done < "$f"
echo "Number characters: $chars"
echo "Number words: $words"
echo "Number lines: $line"
}
As for characters, try this (adjust echo "test" to where you get your output from):
expr `echo "test" | sed "s/./ + 1/g;s/^/0/"`
As for lines, try this:
expr `echo -e "test\ntest\ntest" | sed "s/^.*$/./" | tr -d "\n" | sed "s/./ + 1/g;s/^/0/"`
===
As for your code, you want something like this to count words (if you want to go at it completely raw):
while read line ; do
set $line ;
while true ; do
[ -z $1 ] && break
l=`expr $l + 1`
shift ;
done ;
done
You can do this with the following Bash shell script:
count=0
for var in `cat $1`
do
count=`echo $count+1 | bc`
done
echo $count
new to bash scripting so just wondering if i am doing this code right at all. im trying to search /etc/passwd and then grep and print users.
usage ()
{
echo "usage: ./file.sk user"
}
# test if we have two arguments on the command line
if [ $# != 1 ]
then
usage
exit
fi
if [[ $# < 0 ]];then
usage
exit
fi
# Search for user
fullname=`grep $1 /etc/passwd | cut -f 5 -d :`
firstname=`grep $1 /etc/passwd | cut -f 5 -d : | cut -f 1 -d " "`
#check if there. if name is founf: print msg and line entry
not sure as how to this or if im doing this right...
am i doing this right?
grep $1 /etc/passwd | while IFS=: read -r username passwd uid gid info home shell
do
echo $username: $info
done
This might work for you:
fullname=$(awk -F: '/'$1'/{print $5}' /etc/passwd)
firstname=${fullname/ *}
You're on the right track.
But I think the 2nd if [[ $# < 0 ]] .... fi block doesn't get you much. Your first test case gets the situation right, 'This script requires 1 argument or quits'.
Also, I don't see what you need firstname for, so a basic test is
case "${fullname:--1}" in
-[1] ) printf "No userID found for input=$1\n" ; exit 1 ;;
* )
# assume it is OK
# do what every you want after this case block
;;
esac
You can of course, duplicate this using "${firstname}" if you really need the check.
OR as an equivalent if ... fi is
if [[ "${fullname}" == "" ]] ; then
printf "No userID found for input=$1\n" ; exit 1
fi
note to be more efficient, you can parse ${fullname} to get firstname without all the calls to grep etc, i.e.
firstname=${fullname%% *}
Let me know if you need for me to explain :--1} and %% *} variable modifiers.
I hope this helps.
Instead of this:
fullname=`grep $1 /etc/passwd | cut -f 5 -d :`
firstname=`grep $1 /etc/passwd | cut -f 5 -d : | cut -f 1 -d " "`
Try this:
fullname=$(cut -f5 -d: /etc/passwd | grep "$1")
if [[ $? -ne 0 ]]; then
# not found, do something
fi
firstname=${fullname%% *} # remove the space and everything after
Note that I changed my answer to cut before grep so that it doesn't get false positives if some other field matches the full name you are searching for.
You can simply by reading your input to an array and then printing out your desired fields, something like this -
grep $1 /etc/passwd | while IFS=: read -a arry; do
echo ${arry[0]}:${arry[4]};
done
Test:
jaypal:~/Temp] echo "root:*:0:0:System Administrator:/var/root:/bin/sh" |
while IFS=: read -a arry; do
echo ${arry[0]}:${arry[4]};
done
root:System Administrator