I wonder if there is a way for me to SCP the file from remote2 host directly from my local machine by going through a remote1 host.
The networks only allow connections to remote2 host from remote1 host. Also, neither remote1 host nor remote2 host can scp to my local machine.
Is there something like:
scp user1#remote1:user2#remote2:file .
First window: ssh remote1, then scp remot2:file ..
Second shell: scp remote1:file .
First window: rm file; logout
I could write a script to do all these steps, but if there is a direct way, I would rather use it.
Thanks.
EDIT: I am thinking something like opening SSH tunnels but i'm confused on what value to put where.
At the moment, to access remote1, i have the following in $HOME/.ssh/config on my local machine.
Host remote1
User user1
Hostname localhost
Port 45678
Once on remote1, to access remote2, it's the standard local DNS and port 22. What should I put on remote1 and/or change on localhost?
I don't know of any way to copy the file directly in one single command, but if you can concede to running an SSH instance in the background to just keep a port forwarding tunnel open, then you could copy the file in one command.
Like this:
# First, open the tunnel
ssh -L 1234:remote2:22 -p 45678 user1#remote1
# Then, use the tunnel to copy the file directly from remote2
scp -P 1234 user2#localhost:file .
Note that you connect as user2#localhost in the actual scp command, because it is on port 1234 on localhost that the first ssh instance is listening to forward connections to remote2. Note also that you don't need to run the first command for every subsequent file copy; you can simply leave it running.
Double ssh
Even in your complex case, you can handle file transfer using a single command line, simply with ssh ;-)
And this is useful if remote1 cannot connect to localhost:
ssh user1#remote1 'ssh user2#remote2 "cat file"' > file
tar
But you loose file properties (ownership, permissions...).
However, tar is your friend to keep these file properties:
ssh user1#remote1 'ssh user2#remote2 "cd path2; tar c file"' | tar x
You can also compress to reduce network bandwidth:
ssh user1#remote1 'ssh user2#remote2 "cd path2; tar cj file"' | tar xj
And tar also allows you transferring a recursive directory through basic ssh:
ssh user1#remote1 'ssh user2#remote2 "cd path2; tar cj ."' | tar xj
ionice
If the file is huge and you do not want to disturb other important network applications, you may miss network throughput limitation provided by scp and rsync tools (e.g. scp -l 1024 user#remote:file does not use more than 1 Mbits/second).
But, a workaround is using ionice to keep a single command line:
ionice -c2 -n7 ssh u1#remote1 'ionice -c2 -n7 ssh u2#remote2 "cat file"' > file
Note: ionice may not be available on old distributions.
This will do the trick:
scp -o 'Host remote2' -o 'ProxyCommand ssh user#remote1 nc %h %p' \
user#remote2:path/to/file .
To SCP the file from the host remote2 directly, add the two options (Host and ProxyCommand) to your ~/.ssh/config file (see also this answer on superuser). Then you can run:
scp user#remote2:path/to/file .
from your local machine without having to think about remote1.
With openssh version 7.3 and up it is easy. Use ProxyJump option in the config file.
# Add to ~/.ssh/config
Host bastion
Hostname bastion.client.com
User userForBastion
IdentityFile ~/.ssh/bastion.pem
Host appMachine
Hostname appMachine.internal.com
User bastion
ProxyJump bastion # openssh 7.3 version new feature ProxyJump
IdentityFile ~/.ssh/appMachine.pem. #no need to copy pem file to bastion host
Commands to run to login or copy
ssh appMachine # no need to specify any tunnel.
scp helloWorld.txt appMachine:. # copy without intermediate jumphost/bastion host copy.**
ofcourse you can specify bastion Jump host using option "-J" to ssh command, if not configured in config file.
Note scp does not seems to support "-J" flag as of now. (i could not find in man pages. However above scp works with config file setting)
There is a new option in scp that add recently for exactly this same job that is very convenient, it is -3.
TL;DR For the current host that has authentication already set up in ssh config files, just do:
scp -3 remote1:file remote2:file
Your scp must be from recent versions.
All other mentioned technique requires you to set up authentication from remote1 to remote2 or vice versa, which not always is a good idea.
Argument -3 means you want to move files from two remote hosts by using current host as intermediary, and this host actually does the authentication to both remote hosts, so they don't have to have access to each other.
You just have to setup authentication in ssh config files, which is fairly easy and well documented, and then just run the command in TL;DR
The source for this answer is https://superuser.com/a/686527/713762
This configuration works nice for me:
Host jump
User username
Hostname jumphost.yourorg.intranet
Host production
User username
Hostname production.yourorg.intranet
ProxyCommand ssh -q -W %h:%p jump
Then the command
scp myfile production:~
Copies myfile to production machine.
a simpler way:
scp -o 'ProxyJump your.jump.host' /local/dir/myfile.txt remote.internal.host:/remote/dir
I am writing an SSH config file and want to perform a bit of logic. For example:
Host myhost1
ProxyCommand ssh -A {choose randomly between [bastion_host1] and [bastion_host2]} -W %h:%p
Is it possible to achieve the above using (bash?) variables? Thanks!
Your ProxyCommand can be a shell script.
host myhost1
ProxyCommand $HOME/bin/selecthost %h %p
And then in ~/bin/selecthost:
#!/usr/bin/env bash
hosts=(bastion1 bastion2)
onehost=${hosts[$RANDOM % ${#hosts[#]}]}
ssh -x -a -q ${2:+-W $1:$2} $onehost
Untested. Your mileage may vary. May contain nuts.
Per comments, I've also tested the following, and it works nicely:
host myhost1 myhost2
ProxyCommand bash -c 'hosts=(bastion1 bastion2); ssh -xaqW%h:22 ${hosts[$RANDOM % ${#hosts[#]}]}'
Of course, this method doesn't allow you to specify a custom port per host. You could add that to the logic of a separate shell script if your SSH config matches multiple hosts in the same host entry.
In ~/.ssh/config you cannot have much logic, and no Bash. The manual for this file is in man ssh_config, and it makes no mention of such feature.
What you can do is create a script that will have the logic you need, and make you ssh configuration call that script.
Something along the lines of:
ProxyCommand sudo /root/bin/ssh-randomly.sh [bastion_host1] [bastion_host2]
And write a Bash script /root/bin/ssh-randomly.sh to take two hostname parameters, select one of them randomly, and run the real ssh command with the appropriate parameters.
No; .ssh/config is not processed by any outside program. You'll need a shell function along the lines of
ssh () {
(( $RANDOM % 2 )) && bastion=bastion_host1 || bastion=bastion_host2
command ssh -A "$bastion" "$#"
}
This can be handled within ssh config by using a helper app. For example,
Host myhost match exec "randprog"
hostname host1
Host myhost
hostname host2
and then randprog will randomly return 1 or 0 (0 will match the first line, giving host1).
I have to run a local shell script (windows/Linux) on a remote machine.
I have SSH configured on both machine A and B. My script is on machine A which will run some of my code on a remote machine, machine B.
The local and remote computers can be either Windows or Unix based system.
Is there a way to run do this using plink/ssh?
If Machine A is a Windows box, you can use Plink (part of PuTTY) with the -m parameter, and it will execute the local script on the remote server.
plink root#MachineB -m local_script.sh
If Machine A is a Unix-based system, you can use:
ssh root#MachineB 'bash -s' < local_script.sh
You shouldn't have to copy the script to the remote server to run it.
This is an old question, and Jason's answer works fine, but I would like to add this:
ssh user#host <<'ENDSSH'
#commands to run on remote host
ENDSSH
This can also be used with su and commands which require user input. (note the ' escaped heredoc)
Since this answer keeps getting bits of traffic, I would add even more info to this wonderful use of heredoc:
You can nest commands with this syntax, and that's the only way nesting seems to work (in a sane way)
ssh user#host <<'ENDSSH'
#commands to run on remote host
ssh user#host2 <<'END2'
# Another bunch of commands on another host
wall <<'ENDWALL'
Error: Out of cheese
ENDWALL
ftp ftp.example.com <<'ENDFTP'
test
test
ls
ENDFTP
END2
ENDSSH
You can actually have a conversation with some services like telnet, ftp, etc. But remember that heredoc just sends the stdin as text, it doesn't wait for response between lines
I just found out that you can indent the insides with tabs if you use <<-END!
ssh user#host <<-'ENDSSH'
#commands to run on remote host
ssh user#host2 <<-'END2'
# Another bunch of commands on another host
wall <<-'ENDWALL'
Error: Out of cheese
ENDWALL
ftp ftp.example.com <<-'ENDFTP'
test
test
ls
ENDFTP
END2
ENDSSH
(I think this should work)
Also see
http://tldp.org/LDP/abs/html/here-docs.html
Also, don't forget to escape variables if you want to pick them up from the destination host.
This has caught me out in the past.
For example:
user#host> ssh user2#host2 "echo \$HOME"
prints out /home/user2
while
user#host> ssh user2#host2 "echo $HOME"
prints out /home/user
Another example:
user#host> ssh user2#host2 "echo hello world | awk '{print \$1}'"
prints out "hello" correctly.
This is an extension to YarekT's answer to combine inline remote commands with passing ENV variables from the local machine to the remote host so you can parameterize your scripts on the remote side:
ssh user#host ARG1=$ARG1 ARG2=$ARG2 'bash -s' <<'ENDSSH'
# commands to run on remote host
echo $ARG1 $ARG2
ENDSSH
I found this exceptionally helpful by keeping it all in one script so it's very readable and maintainable.
Why this works. ssh supports the following syntax:
ssh user#host remote_command
In bash we can specify environment variables to define prior to running a command on a single line like so:
ENV_VAR_1='value1' ENV_VAR_2='value2' bash -c 'echo $ENV_VAR_1 $ENV_VAR_2'
That makes it easy to define variables prior to running a command. In this case echo is our command we're running. Everything before echo defines environment variables.
So we combine those two features and YarekT's answer to get:
ssh user#host ARG1=$ARG1 ARG2=$ARG2 'bash -s' <<'ENDSSH'...
In this case we are setting ARG1 and ARG2 to local values. Sending everything after user#host as the remote_command. When the remote machine executes the command ARG1 and ARG2 are set the local values, thanks to local command line evaluation, which defines environment variables on the remote server, then executes the bash -s command using those variables. Voila.
<hostA_shell_prompt>$ ssh user#hostB "ls -la"
That will prompt you for password, unless you have copied your hostA user's public key to the authorized_keys file on the home of user .ssh's directory. That will allow for passwordless authentication (if accepted as an auth method on the ssh server's configuration)
I've started using Fabric for more sophisticated operations. Fabric requires Python and a couple of other dependencies, but only on the client machine. The server need only be a ssh server. I find this tool to be much more powerful than shell scripts handed off to SSH, and well worth the trouble of getting set up (particularly if you enjoy programming in Python). Fabric handles running scripts on multiple hosts (or hosts of certain roles), helps facilitate idempotent operations (such as adding a line to a config script, but not if it's already there), and allows construction of more complex logic (such as the Python language can provide).
cat ./script.sh | ssh <user>#<host>
chmod +x script.sh
ssh -i key-file root#111.222.3.444 < ./script.sh
Try running ssh user#remote sh ./script.unx.
Assuming you mean you want to do this automatically from a "local" machine, without manually logging into the "remote" machine, you should look into a TCL extension known as Expect, it is designed precisely for this sort of situation. I've also provided a link to a script for logging-in/interacting via SSH.
https://www.nist.gov/services-resources/software/expect
http://bash.cyberciti.biz/security/expect-ssh-login-script/
ssh user#hostname ". ~/.bashrc;/cd path-to-file/;. filename.sh"
highly recommended to source the environment file(.bashrc/.bashprofile/.profile). before running something in remote host because target and source hosts environment variables may be deffer.
I use this one to run a shell script on a remote machine (tested on /bin/bash):
ssh deploy#host . /home/deploy/path/to/script.sh
if you wanna execute command like this
temp=`ls -a`
echo $temp
command in `` will cause errors.
below command will solve this problem
ssh user#host '''
temp=`ls -a`
echo $temp
'''
If the script is short and is meant to be embedded inside your script and you are running under bash shell and also bash shell is available on the remote side, you may use declare to transfer local context to remote. Define variables and functions containing the state that will be transferred to the remote. Define a function that will be executed on the remote side. Then inside a here document read by bash -s you can use declare -p to transfer the variable values and use declare -f to transfer function definitions to the remote.
Because declare takes care of the quoting and will be parsed by the remote bash, the variables are properly quoted and functions are properly transferred. You may just write the script locally, usually I do one long function with the work I need to do on the remote side. The context has to be hand-picked, but the following method is "good enough" for any short scripts and is safe - should properly handle all corner cases.
somevar="spaces or other special characters"
somevar2="!##$%^"
another_func() {
mkdir -p "$1"
}
work() {
another_func "$somevar"
touch "$somevar"/"$somevar2"
}
ssh user#server 'bash -s' <<EOT
$(declare -p somevar somevar2) # transfer variables values
$(declare -f work another_func) # transfer function definitions
work # call the function
EOT
The answer here (https://stackoverflow.com/a/2732991/4752883) works great if
you're trying to run a script on a remote linux machine using plink or ssh.
It will work if the script has multiple lines on linux.
**However, if you are trying to run a batch script located on a local
linux/windows machine and your remote machine is Windows, and it consists
of multiple lines using **
plink root#MachineB -m local_script.bat
wont work.
Only the first line of the script will be executed. This is probably a
limitation of plink.
Solution 1:
To run a multiline batch script (especially if it's relatively simple,
consisting of a few lines):
If your original batch script is as follows
cd C:\Users\ipython_user\Desktop
python filename.py
you can combine the lines together using the "&&" separator as follows in your
local_script.bat file:
https://stackoverflow.com/a/8055390/4752883:
cd C:\Users\ipython_user\Desktop && python filename.py
After this change, you can then run the script as pointed out here by
#JasonR.Coombs: https://stackoverflow.com/a/2732991/4752883 with:
`plink root#MachineB -m local_script.bat`
Solution 2:
If your batch script is relatively complicated, it may be better to use a batch
script which encapsulates the plink command as well as follows as pointed out
here by #Martin https://stackoverflow.com/a/32196999/4752883:
rem Open tunnel in the background
start plink.exe -ssh [username]#[hostname] -L 3307:127.0.0.1:3306 -i "[SSH
key]" -N
rem Wait a second to let Plink establish the tunnel
timeout /t 1
rem Run the task using the tunnel
"C:\Program Files\R\R-3.2.1\bin\x64\R.exe" CMD BATCH qidash.R
rem Kill the tunnel
taskkill /im plink.exe
This bash script does ssh into a target remote machine, and run some command in the remote machine, do not forget to install expect before running it (on mac brew install expect )
#!/usr/bin/expect
set username "enterusenamehere"
set password "enterpasswordhere"
set hosts "enteripaddressofhosthere"
spawn ssh $username#$hosts
expect "$username#$hosts's password:"
send -- "$password\n"
expect "$"
send -- "somecommand on target remote machine here\n"
sleep 5
expect "$"
send -- "exit\n"
You can use runoverssh:
sudo apt install runoverssh
runoverssh -s localscript.sh user host1 host2 host3...
-s runs a local script remotely
Useful flags:
-g use a global password for all hosts (single password prompt)
-n use SSH instead of sshpass, useful for public-key authentication
If it's one script it's fine with the above solution.
I would set up Ansible to do the Job. It works in the same way (Ansible uses ssh to execute the scripts on the remote machine for both Unix or Windows).
It will be more structured and maintainable.
It is unclear if the local script uses locally set variables, functions, or aliases.
If it does this should work:
myscript.sh:
#!/bin/bash
myalias $myvar
myfunction $myvar
It uses $myvar, myfunction, and myalias. Let us assume they is set locally and not on the remote machine.
Make a bash function that contains the script:
eval "myfun() { `cat myscript.sh`; }"
Set variable, function, and alias:
myvar=works
alias myalias='echo This alias'
myfunction() { echo This function "$#"; }
And "export" myfun, myfunction, myvar, and myalias to server using env_parallel from GNU Parallel:
env_parallel -S server -N0 --nonall myfun ::: dummy
Extending answer from #cglotr. In order to write inline command use printf, it useful for simple command and it support multiline using char escaping '\n'
example :
printf "cd /to/path/your/remote/machine/log \n tail -n 100 Server.log" | ssh <user>#<host> 'bash -s'
See don't forget to add bash -s
I created a solution that works better for me by combining the use of a heredoc from Yarek T's answer with the piped cat method from cglotr's answer along with some other tricks for non-interactive login (using sshpass), using variables from the local and remote host in the script, and enabling sudo commands. The code is longer just because it includes some additional tricks that are likely desired, but the original questioner didn't ask for them.
The problem I have with Yarek's answer is that all the warnings and commands in the heredoc print to the screen. The problem I have with cglotr's answer is that is requires a script file and a complex command with additional interaction to execute the script. With my solution, I write a script that does everything by simply calling the script with the remote host IP address as the first argument like this:
./MYSCRIPT REMOTE_IP_ADDRESS
The script to be run on the remote host is saved to a variable within the script on the local host using a heredoc so that you don't need to do any quote escaping. Then, the variable containing the script is echo piped to sshpass. Be sure to indent the commands with tabs and not spaces (you'll get spaces instead of tabs when you copy the code). Here is an example of the remote script within the local script.
!/bin/bash
# Input argument 1 should be the target host IP address (required)
RX_IP="/(\b25[0-5]|\b2[0-4][0-9]|\b[01]?[0-9][0-9]?)(\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)){3}/"
IS_IP=$(echo $1 | sed -nr "${RX_IP}p" | wc -l)
if (( $IS_IP )); then
USERNAME=remoteuser
HOSTNAME=$1
# Export the SSH password to environment variable for sshpass and sudo.
# The space before the command prevents saving the command to history.
export SSHPASS=mypassword;
while read -r -d '' SCRIPT <<-EOS
# Enable sudo commands with the following command.
# The space before echo prevents saving the command to history.
echo $SSHPASS | sudo -Sv
# Do stuff here. Escape variables to be be accessed on the remote host.
# For example, escape print variable in an awk command:
# This command lists all USB block device partitions.
ls -l /dev /dev/mapper | awk '/^b/ && /sd[a-z][1-9]/ {print \$10}'
exit
EOS
echo "$SCRIPT" | sshpass -e ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null ${USERNAME}#${HOSTNAME} &>/dev/null
echo 'DONE'
else
echo "Missing IP address of target host."
echo "Usage: ./SCRIPT_NAME IP_ADDRESS
fi
You need to install sshpass on the local host like this (for Debian based distros).
sudo apt install sshpass
There is another approach ,you can copy your script in your host with scp command then execute it easily .
First, copy the script over to Machine B using scp
[user#machineA]$ scp /path/to/script user#machineB:/home/user/path
Then, just run the script
[user#machineA]$ ssh user#machineB "/home/user/path/script"
This will work if you have given executable permission to the script.