I'm trying to create a homemade installer that replicates the functionality of an MSI. I'm running into trouble setting the registry values for my app, specifically the UninstallString, which is supposed to run when you right-click a program and click Uninstall. This was my initial UninstallString:
regedit C:\path\to\app\uninstall.reg & rd /s /q C:\path\to\app
For some reason, the & was not interpreted correctly and it was passed as an argument to regedit, so I tried this
cmd /c "regedit C:\path\to\app\uninstall.reg & rd /s /q C:\path\to\app"
This worked fine, but it showed the console window while uninstalling. Following the advice here, I tried
start /min "..."
and
start /min cmd /c "..."
but they both resulted in an error from the Control Panel, saying the program "was already uninstalled." I also tried it the other way around:
cmd /c start /min "..."
But the black window still popped up.
Is it possible to make this work without having to show the console window?
This worked:
cmd /c start /min cmd /c "..."
Gotta love Windows.
Related
I have a start.bat which does nothing but
#echo off
Echo "Hello World"
Then I open a cmd window and type in
start "" /D D:\Test start.bat
it opens a new cmd window with "Hello World", but does not close the window automatically.
Now I created another bat file named start2.bat which has the same content as the start.bat above. Then I type in
start "" /D D:\Test start2.bat
it opens a new cmd window with "Hello World", and does close the window automatically.
Why is it happening ???
I try to use some trace tool to analyse, from the tool, it seems like my system turn start "" /D D:\Test start.bat to cmd.exe /K start.bat
TraceTool
Tried in another computer, now, no matter which file name I used, it turns into cmd/exe /K start.bat
start3.bat
Update:
Turns out adding /C does not work for me, attach process tree below, the system still changes /C to /K
Process tree view with /C
Update:
Provide full process view. My start.bat is exactly the same as above
And now I open a cmd.exe window, and typed in
"c:\windows\system32\cmd.exe" /C START "test" /D "C:\test" start.bat or just cmd /C START "test" /D "C:\test" start.bat
And
"c:\windows\system32\cmd.exe" /C START "test" /D "C:\test" start2.bat or just cmd /C START "test" /D "C:\test" start2.bat
From the process tree view, it can be seen that the first command turns into
C:\windows\system32\cmd.exe /K start.bat
While the second command turns into
C:\windows\system32\cmd.exe /c "c:\test\start2.bat" "
cmd.exe
Full Process Tree View
From the usage information of the start command (excerpt from the description of the command/program argument):
[...]
command/program
If it is an internal cmd command or a batch file then
the command processor is run with the /K switch to cmd.exe.
This means that the window will remain after the command
has been run.
If it is not an internal cmd command or batch file then
it is a program and will run as either a windowed application
or a console application.
[...]
Hence when starting an internal command or a batch file, cmd.exe together with its /K option is used, so start "" "script.bat" is equivalent to:
start "" cmd.exe /K "script.bat"
If you want the new console window to become closed, use this instead:
start "" cmd.exe /C "script.bat"
Is there a command to reset Windows cmd window? I would like it to have the same effect as opening a new cmd window, but well, by reloading the current one.
What I want to do is install Python from the command line and then "reload" the window so I can use Python in a current window. I don't want to close the cmd and then open it again.
Have a look at this list. I think cls is what you are looking for:
The cls command clears the screen of all previously entered commands and other text. The cls command is available in all versions of Windows, as well as in MS-DOS.
The following will create a brand new (reset) window with your current working directory set.
START "" "C:\Users\lit\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\User Pinned\StartMenu\cmd.exe.lnk" /K CD /D "%CD%" & EXIT
To avoid to repeat a task too often, I am setting up a batch file (in WINDOWS 10). It opens several CMD PROMPT to a specific Directory and launch a command.
For one case, I want the CMD PROMPT to open, to go to the specific directory and to set the COMMAND in the PROMPT without launching it. Then I'd just have to click on ENTER to launch that command whenever I want later on.
Here is my code:
setlocal ENABLEEXTENSIONS
set CordovaProjPath="C:\MyPath\"
start cmd /k "cd /d %CordovaProjPath% && cordova build android"
With this code it launches the command "cordova build android".
If I go with start cmd /k "cd /d %JCACordovaProjPath% instead of start cmd /k "cd /d %JCACordovaProjPath% && cordova build android" it gives me the PROMPT with: "C:\MyPath>", I'd like to write: "cordova build android" behind it without launching the command.
Any idea?
To provide repeatable execution (as mentioned in comments) you can put the relevant commands in a loop with a "quit" option:
#Echo Off
setlocal
Set "CordovaProjPath=C:\MyPath"
Set "CommandToRun=cordova build android"
:loop
Cd /D %CordovaProjPath%
Echo %CommandToRun%
set QUIT=
set /p QUIT=Press ENTER to run command or 'Q' to quit:
if /i "%QUIT%" == "Q" goto :eof
%CommandToRun%
goto :loop
Unlike the original, this runs the target command in the same command-window as the repeating loop. Depending on what the command in question does, this may be more attractive (less windows popping-up). However, some commands may cause the main window to close; if this is the case, you can revert to running the command in its own window in one of two different ways. In each case, replace the line:
...
%CommandToRun%
...
Run in own window and remain open
...
start "%CommandToRun%" /wait cmd /k %CommandToRun%
...
Using /k will leave the command-prompt window open after the target command has run -- this may be appropriate if you need to see the output of the command and it does not have its own pause.
Run in own window then close
...
start "%CommandToRun%" /wait cmd /c %CommandToRun%
...
Using /c will mean the command-prompt will close after the target command has run. This may be appropriate if you do not need to see the output of the command, or if it has its own pause.
Would something like this do you:
#Echo Off
Set "CordovaProjPath=C:\MyPath"
Set "CommandToRun=cordova build android"
Start "%CommandToRun%" Cmd /K "Cd /D %CordovaProjPath%&Echo %CommandToRun%&Pause>Nul&%CommandToRun%"
Below is an alternative which may allow for your alternative double-quoting method:
#Echo Off
Set CordovaProjPath="C:\MyPath"
Set CommandToRun="cordova build android"
Start %CommandToRun% Cmd /K "(Cd /D %CordovaProjPath%)&(Echo %CommandToRun%)&(Pause>Nul)&(%CommandToRun%)"
I need to be able to start a command line app minimized, and have it auto-start on Windows 8.1 at user login.
The following command works well at the Windows 8.1 command line:
start /min /D c:\"program files (x86)"\mycompanyname myappname.exe
However it fails to work in the registry at HKCU\software\Microsoft\Windows\CurrentVersion\Run.
Help please
Option #1:
cmd.exe /c "start /min /D c:\"program files (x86)"\mycompanyname myappname.exe"
However you might see a black window popup and then go away.
Option #2: instead of changing registry, create a shortcut in %APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup In the properties of the shortcut, you can specify "Minimized" option.
Option #3: write a startMinimized.vbs script like this one (untested):
set objShell = CreateObject( "WScript.Shell" )
objShell.Run "c:\program files (x86)\mycompanyname\myappname.exe", 2
Then in the registry
wscript.exe "c:\program files (x86)\mycompanyname\startMinimized.vbs"
I'm trying to write a command in a bat file to run an installer exe file. The important part is to start and run the installer in silent mode. To clarify, I DO NOT want the user to see the installer and click through the wizard. They should just be able to double click the bat file and walk away. I have attempted this command in my bat file:
#echo off
REM Next command runs installer in silent mode
start /d "%USERPROFILE%\Desktop" MyInstaller_7.1.51.14.exe –s –v –qn
The –s –v –qn are supposed to enable the installer to run in the background, but they are not working.
Can anyone help me improve my command in my bat file so that MyInstaller_7.1.51.14.exe is indeed running in the background, silently, with no UI or wizard of any kind visible to the user??
Please help.
You can try one of these START command options to see if it gives you the effect you want:
/B = Start application without creating a new window
/MIN = Start window minimized
Edited:
Try putting the command with its switches inside quotes:
start /d "%USERPROFILE%\Desktop" "MyInstaller_7.1.51.14.exe –s –v –qn"
Another solution you can test :
Create a file RunHide.vbs and put this line in it :
CreateObject("Wscript.Shell").Run """" & WScript.Arguments(0) & """", 0, False
and then run your batch file like this :
wscript.exe "RunHide.vbs" "Install.bat"
and your batch file will be run without any windows (and maybe your Installer to)
I finally figured it out.
Here is the correct code:
#echo off
REM Next command runs installer in silent mode
start "%USERPROFILE%\Desktop" MyInstaller_7.1.51.14.exe /s /v /qn
The change was between –s –v –qn and /s /v /qn where the former does not work, and the latter does.