Related
I am trying to study SML (for full transparency this is in preparation for an exam (exam has not started)) and one area that I have been struggling with is higher level functions such as map and foldl/r. I understand that they are used in situations where you would use a for loop in oop languages (I think). What I am struggling with though is what each part in a fold or map function is doing. Here are some examples that if someone could break them down I would be very appreciative
fun cubiclist L = map (fn x=> x*x*x) L;
fun min (x::xs) = foldr (fn (a,b) => if (a < b) then a else b) x xs;
So if I could break down the parts I see and high light the parts I'm struggling with I believe that would be helpful.
Obviously right off the bat you have the name of the functions and the parameters that are being passed in but one question I have on that part is why are we just passing in a variable to cubiclist but for min we pass in (x::xs)? Is it because the map function is automatically applying the function to each part in the map? Also along with that will the fold functions typically take the x::xs parameters while map will just take a variable?
Then we have the higher order function along with the anonymous functions with the logic/operations that we want to apply to each element in the list. But the parameters being passed in for the foldr anonymous function I'm not quite sure about. I understand we are trying to capture the lowest element in the list and the then a else b is returning either a or b to be compared with the other elements in the list. I'm pretty sure that they are rutnred and treated as a in future comparisons but where do we get the following b's from? Where do we say b is the next element in the list?
Then the part that I really don't understand and have no clue is the L; and x xs; at the end of the respective functions. Why are they there? What are they doing? what is their purpose? is it just syntax or is there actually a purpose for them being there, not saying that syntax isn't a purpose or a valid reason, but does they actually do something? Are those variables that can be changed out with something else that would provide a different answer?
Any help/explanation is much appreciated.
In addition to what #molbdnilo has already stated, it can be helpful to a newcomer to functional programming to think about what we're actually doing when we crate a loop: we're specifying a piece of code to run repeatedly. We need an initial state, a condition for the loop to terminate, and an update between each iteration.
Let's look at simple implementation of map.
fun map f [] = []
| map f (x :: xs) = f x :: map f xs
The initial state of the contents of the list.
The termination condition is the list is empty.
The update is that we tack f x onto the front of the result of mapping f to the rest of the list.
The usefulness of map is that we abstract away f. It can be anything, and we don't have to worry about writing the loop boilerplate.
Fold functions are both more complex and more instructive when comparing to loops in procedural languages.
A simple implementation of fold.
fun foldl f init [] = init
| foldl f init (x :: xs) = foldl f (f init x) xs
We explicitly provide an initial value, and a list to operate on.
The termination condition is the list being empty. If it is, we return the initial value provided.
The update is to call the function again. This time the initial value is updated, and the list is the tail of the original.
Consider summing a list of integers.
foldl op+ 0 [1,2,3,4]
foldl op+ 1 [2,3,4]
foldl op+ 3 [3,4]
foldl op+ 6 [4]
foldl op+ 10 []
10
Folds are important to understand because so many fundamental functions can be implemented in terms of foldl or foldr. Think of folding as a means of reducing (many programming languages refer to these functions as "reduce") a list to another value of some type.
map takes a function and a list and produces a new list.
In map (fn x=> x*x*x) L, the function is fn x=> x*x*x, and L is the list.
This list is the same list as cubiclist's parameter.
foldr takes a function, an initial value, and a list and produces some kind of value.
In foldr (fn (a,b) => if (a < b) then a else b) x xs, the function is fn (a,b) => if (a < b) then a else b, the initial value is x, and the list is xs.
x and xs are given to the function by pattern-matching; x is the argument's head and xs is its tail.
(It follows from this that min will fail if it is given an empty list.)
I'm new to functional programming and I'm trying to implement a basic algorithm using OCAML for course that I'm following currently.
I'm trying to implement the following algorithm :
Entries :
- E : a non-empty set of integers
- s : an integer
- d : a positive float different of 0
Output :
- T : a set of integers included into E
m <- min(E)
T <- {m}
FOR EACH e ∈ sort_ascending(E \ {m}) DO
IF e > (1+d)m AND e <= s THEN
T <- T U {e}
m <- e
RETURN T
let f = fun (l: int list) (s: int) (d: float) ->
List.fold_left (fun acc x -> if ... then (list_union acc [x]) else acc)
[(list_min l)] (list_sort_ascending l) ;;
So far, this is what I have, but I don't know how to handle the modification of the "m" variable mentioned in the algorithm... So I need help to understand what is the best way to implement the algorithm, maybe I'm not gone in the right direction.
Thanks by advance to anyone who will take time to help me !
The basic trick of functional programming is that although you can't modify the values of any variables, you can call a function with different arguments. In the initial stages of switching away from imperative ways of thinking, you can imagine making every variable you want to modify into the parameters of your function. To modify the variables, you call the function recursively with the desired new values.
This technique will work for "modifying" the variable m. Think of m as a function parameter instead.
You are already using this technique with acc. Each call inside the fold gets the old value of acc and returns the new value, which is then passed to the function again. You might imagine having both acc and m as parameters of this inner function.
Assuming list_min is defined you should think the problem methodically. Let's say you represent a set with a list. Your function takes this set and some arguments and returns a subset of the original set, given the elements meet certain conditions.
Now, when I read this for the first time, List.filter automatically came to my mind.
List.filter : ('a -> bool) -> 'a list -> 'a list
But you wanted to modify the m so this wouldn't be useful. It's important to know when you can use library functions and when you really need to create your own functions from scratch. You could clearly use filter while handling m as a reference but it wouldn't be the functional way.
First let's focus on your predicate:
fun s d m e -> (float e) > (1. +. d)*.(float m) && (e <= s)
Note that +. and *. are the plus and product functions for floats, and float is a function that casts an int to float.
Let's say the function predicate is that predicate I just mentioned.
Now, this is also a matter of opinion. In my experience I wouldn't use fold_left just because it's just complicated and not necessary.
So let's begin with my idea of the code:
let m = list_min l;;
So this is the initial m
Then I will define an auxiliary function that reads the m as an argument, with l as your original set, and s, d and m the variables you used in your original imperative code.
let rec f' l s d m =
match l with
| [] -> []
| x :: xs -> if (predicate s d m x) then begin
x :: (f' xs s d x)
end
else
f' xs s d m in
f' l s d m
Then for each element of your set, you check if it satisfies the predicate, and if it does, you call the function again but you replace the value of m with x.
Finally you could just call f' from a function f:
let f (l: int list) (s: int) (d: float) =
let m = list_min l in
f' l s d m
Be careful when creating a function like your list_min, what would happen if the list was empty? Normally you would use the Option type to handle those cases but you assumed you're dealing with a non-empty set so that's great.
When doing functional programming it's important to think functional. Pattern matching is super recommended, while pointers/references should be minimal. I hope this is useful. Contact me if you any other doubt or recommendation.
Suppose I have a list xs. How do I write the following style of loop in ATS:
foreach x in xs do process(x)
You can use the old DIY-style (also: the classical ATS style), that is to say, using a tail-recursive function. Here's an example:
extern
fun
process (x: int): void
fun
loop {n:int} (xs: list(int, n)): void =
case+ xs of
| list_nil () => ()
| list_cons (x, xs1) => let
val () = process (x)
in
loop (xs1)
end
// end of [loop]
You can run the full code online
I think that this approach is preferable if none of the combinators or template functions provided in the libraries such as ATSLIB is suitable for your case.
A combinator-based solution (for a list0-value):
(xs).foreach()(lam x => process(x))
In ATS, foreach is overloaded with many functions that do some form of sequence traversal.
There is also iforeach if the position of each element is needed:
(xs).iforeach()(lam (i, x) => process(i, x))
This is a POOR solution one needs to avoid!
A beginner of functional programming often does list traversal using the list_get_at function (which overloads the symbol []). For instance, it is fairly common to see code that does more or less what the following line does:
(length(xs)).foreach()(lam i => process(xs[i])) // O(n^2)-time
This is EXTREMELY inefficient. Calling list_get_at inside a loop is almost always a bad idea!
I'm testing a simple program to generate subsets with an inclusion test. For example, given
*Main Data.List> factorsets 7
[([2],2),([2,3],1),([3],1),([5],1),([7],1)]
calling chooseP 3 (factorsets 7), I would like to get (read from right to left, a la cons)
[[([5],1),([3],1),([2],2)]
,[([7],1),([3],1),([2],2)]
,[([7],1),([5],1),([2],2)]
,[([7],1),([5],1),([2,3],1)]
,[([7],1),([5],1),([3],1)]]
But my program is returning an extra [([7],1),([5],1),([3],1)] (and missing a [([7],1),([5],1),([2],2)]):
[[([5],1),([3],1),([2],2)]
,[([7],1),([3],1),([2],2)]
,[([7],1),([5],1),([3],1)]
,[([7],1),([5],1),([2,3],1)]
,[([7],1),([5],1),([3],1)]]
The inclusion test is: members' first part of the tuple must have a null intersection.
Once tested as working, the plan is to sum the internal products of each subset's snds, rather than accumulate them.
Since I've asked a similar question before, I imagine that an extra branch is generated since when the recursion splits at [2,3], the second branch runs over the same possibilities once it passes the skipped section. Any pointers on how to resolve that would be appreciated; and if you'd like to share ideas about how to enumerate and sum such product combinations more efficiently, that would be great, too.
Haskell code:
chooseP k xs = chooseP' xs [] 0 where
chooseP' [] product count = if count == k then [product] else []
chooseP' yys product count
| count == k = [product]
| null yys = []
| otherwise = f ++ g
where (y:ys) = yys
(factorsY,numY) = y
f = let zzs = dropWhile (\(fs,ns) -> not . and . map (null . intersect fs . fst) $ product) yys
in if null zzs
then chooseP' [] product count
else let (z:zs) = zzs in chooseP' zs (z:product) (count + 1)
g = if and . map (null . intersect factorsY . fst) $ product
then chooseP' ys product count
else chooseP' ys [] 0
Your code is complicated enough that I might recommend starting over. Here's how I would proceed.
Write a specification. Let it be as stupidly inefficient as necessary -- for example, the spec I choose below will build all combinations of k elements from the list, then filter out the bad ones. Even the filter will be stupidly slow.
sorted xs = sort xs == xs
unique xs = nub xs == xs
disjoint xs = and $ liftM2 go xs xs where
go x1 x2 = x1 == x2 || null (intersect x1 x2)
-- check that x is valid according to all the validation functions in fs
-- (there are other fun ways to spell this, but this is particularly
-- readable and clearly correct -- just what we want from a spec)
allFuns fs x = all ($x) fs
choosePSpec k = filter good . replicateM k where
good pairs = allFuns [unique, disjoint, sorted] (map fst pairs)
Just to make sure it's right, we can test it at the prompt:
*Main> mapM_ print $ choosePSpec 3 [([2],2),([2,3],1),([3],1),([5],1),([7],1)]
[([2],2),([3],1),([5],1)]
[([2],2),([3],1),([7],1)]
[([2],2),([5],1),([7],1)]
[([2,3],1),([5],1),([7],1)]
[([3],1),([5],1),([7],1)]
Looks good.
Now that we have a spec, we can try to improve the speed one refactoring at a time, always checking that it matches the spec. The first thing I'd want to do is notice that we can ensure uniqueness and sortedness just by sorting the input and picking things "in an increasing way". To do this, we can define a function which chooses subsequences of a given length. It piggy-backs on the tails function, which you can think of as nondeterministically choosing a place to split its input list.
subseq 0 xs = [[]]
subseq n xs = do
x':xt <- tails xs
xs' <- subseq (n-1) xt
return (x':xs')
Here's an example of this function in action:
*Main> subseq 3 [1..4]
[[1,2,3],[1,2,4],[1,3,4],[2,3,4]]
Now we can write a slightly faster chooseP by replacing replicateM with subseq. Recall that we're assuming the inputs are already sorted and unique, though.
choosePSlow k = filter good . subseq k where
good pairs = disjoint $ map fst pairs
We can sanity-check that it's working by running it on the particular input we have from above:
*Main> let i = [([2],2),([2,3],1),([3],1),([5],1),([7],1)]
*Main> choosePSlow 3 i == choosePSpec 3 i
True
Or, better yet, we can stress-test it with QuickCheck. We'll need a tiny bit more code. The condition k < 5 is just because the spec is so hopelessly slow that bigger values of k take forever.
propSlowMatchesSpec :: NonNegative Int -> OrderedList ([Int], Int) -> Property
propSlowMatchesSpec (NonNegative k) (Ordered xs)
= k < 5 && unique (map fst xs)
==> choosePSlow k xs == choosePSpec k xs
*Main> quickCheck propSlowMatchesSpec
+++ OK, passed 100 tests.
There are several more opportunities to make things faster. For instance, the disjoint test could be sped up using choose 2 instead of liftM2; or we might be able to ensure disjointness during element selection and prune the search even earlier; etc. How you want to improve it from here I leave to you -- but the basic technique (start with stupid and slow, then make it smarter, testing as you go) should be helpful to you.
I need a function which takes a list and return unique element if it exists or [] if it doesn't. If many unique elements exists it should return the first one (without wasting time to find others).
Additionally I know that all elements in the list come from (small and known) set A.
For example this function does the job for Ints:
unique :: Ord a => [a] -> [a]
unique li = first $ filter ((==1).length) ((group.sort) li)
where first [] = []
first (x:xs) = x
ghci> unique [3,5,6,8,3,9,3,5,6,9,3,5,6,9,1,5,6,8,9,5,6,8,9]
ghci> [1]
This is however not good enough because it involves sorting (n log n) while it could be done in linear time (because A is small).
Additionally it requires the type of list elements to be Ord while all which should be needed is Eq. It would also be nice if amount of comparisons was as small as possible (ie if we traverse a list and encounter element el twice we don't test subsequent elements for equality with el)
This is why for example this: Counting unique elements in a list doesn't solve the problem - all answers involve either sorting or traversing the whole list to find count of all elements.
The question is: how to do it correctly and efficiently in Haskell ?
Okay, linear time, from a finite domain. The running time will be O((m + d) log d), where m is the size of the list and d is the size of the domain, which is linear when d is fixed. My plan is to use the elements of the set as the keys of a trie, with the counts as values, then look through the trie for elements with count 1.
import qualified Data.IntTrie as IntTrie
import Data.List (foldl')
import Control.Applicative
Count each of the elements. This traverses the list once, builds a trie with the results (O(m log d)), then returns a function which looks up the result in the trie (with running time O(log d)).
counts :: (Enum a) => [a] -> (a -> Int)
counts xs = IntTrie.apply (foldl' insert (pure 0) xs) . fromEnum
where
insert t x = IntTrie.modify' (fromEnum x) (+1) t
We use the Enum constraint to convert values of type a to integers in order to index them in the trie. An Enum instance is part of the witness of your assumption that a is a small, finite set (Bounded would be the other part, but see below).
And then look for ones that are unique.
uniques :: (Eq a, Enum a) => [a] -> [a] -> [a]
uniques dom xs = filter (\x -> cts x == 1) dom
where
cts = counts xs
This function takes as its first parameter an enumeration of the entire domain. We could have required a Bounded a constraint and used [minBound..maxBound] instead, which is semantically appealing to me since finite is essentially Enum+Bounded, but quite inflexible since now the domain needs to be known at compile time. So I would choose this slightly uglier but more flexible variant.
uniques traverses the domain once (lazily, so head . uniques dom will only traverse as far as it needs to to find the first unique element -- not in the list, but in dom), for each element running the lookup function which we have established is O(log d), so the filter takes O(d log d), and building the table of counts takes O(m log d). So uniques runs in O((m + d) log d), which is linear when d is fixed. It will take at least Ω(m log d) to get any information from it, because it has to traverse the whole list to build the table (you have to get all the way to the end of the list to see if an element was repeated, so you can't do better than this).
There really isn't any way to do this efficiently with just Eq. You'd need to use some much less efficient way to build the groups of equal elements, and you can't know that only one of a particular element exists without scanning the whole list.
Also, note that to avoid useless comparisons you'd need a way of checking to see if an element has been encountered before, and the only way to do that would be to have a list of elements known to have multiple occurrences, and the only way to check if the current element is in that list is... to compare it for equality with each.
If you want this to work faster than O(something really horrible) you need that Ord constraint.
Ok, based on the clarifications in comments, here's a quick and dirty example of what I think you're looking for:
unique [] _ _ = Nothing
unique _ [] [] = Nothing
unique _ (r:_) [] = Just r
unique candidates results (x:xs)
| x `notElem` candidates = unique candidates results xs
| x `elem` results = unique (delete x candidates) (delete x results) xs
| otherwise = unique candidates (x:results) xs
The first argument is a list of candidates, which should initially be all possible elements. The second argument is the list of possible results, which should initially be empty. The third argument is the list to examine.
If it runs out of candidates, or reaches the end of the list with no results, it returns Nothing. If it reaches the end of the list with results, it returns the one at the front of the result list.
Otherwise, it examines the next input element: If it's not a candidate, it ignores it and continues. If it's in the result list we've seen it twice, so remove it from the result and candidate lists and continue. Otherwise, add it to the results and continue.
Unfortunately, this still has to scan the entire list for even a single result, since that's the only way to be sure it's actually unique.
First off, if your function is intended to return at most one element, you should almost certainly use Maybe a instead of [a] to return your result.
Second, at minimum, you have no choice but to traverse the entire list: you can't tell for sure if any given element is actually unique until you've looked at all the others.
If your elements are not Ordered, but can only be tested for Equality, you really have no better option than something like:
firstUnique (x:xs)
| elem x xs = firstUnique (filter (/= x) xs)
| otherwise = Just x
firstUnique [] = Nothing
Note that you don't need to filter out the duplicated elements if you don't want to -- the worst case is quadratic either way.
Edit:
The above misses the possibility of early exit due to the above-mentioned small/known set of possible elements. However, note that the worst case will still require traversing the entire list: all that is necessary is for at least one of these possible elements to be missing from the list...
However, an implementation that provides an early out in case of set exhaustion:
firstUnique = f [] [<small/known set of possible elements>] where
f [] [] _ = Nothing -- early out
f uniques noshows (x:xs)
| elem x uniques = f (delete x uniques) noshows xs
| elem x noshows = f (x:uniques) (delete x noshows) xs
| otherwise = f uniques noshows xs
f [] _ [] = Nothing
f (u:_) _ [] = Just u
Note that if your list has elements which shouldn't be there (because they aren't in the small/known set), they will be pointedly ignored by the above code...
As others have said, without any additional constraints, you can't do this in less than quadratic time, because without knowing something about the elements, you can't keep them in some reasonable data structure.
If we are able to compare elements, an obvious O(n log n) solution to compute the count of elements first and then find the first one with count equal to 1:
import Data.List (foldl', find)
import Data.Map (Map)
import qualified Data.Map as Map
import Data.Maybe (fromMaybe)
count :: (Ord a) => Map a Int -> a -> Int
count m x = fromMaybe 0 $ Map.lookup x m
add :: (Ord a) => Map a Int -> a -> Map a Int
add m x = Map.insertWith (+) x 1 m
uniq :: (Ord a) => [a] -> Maybe a
uniq xs = find (\x -> count cs x == 1) xs
where
cs = foldl' add Map.empty xs
Note that the log n factor comes from the fact that we need to operate on a Map of size n. If the list has only k unique elements then the size of our map will be at most k, so the overall complexity will be just O(n log k).
However, we can do even better - we can use a hash table instead of a map to get an O(n) solution. For this we'll need the ST monad to perform mutable operations on the hash map, and our elements will have to be Hashable. The solution is basically the same as before, just a little bit more complex due to working within the ST monad:
import Control.Monad
import Control.Monad.ST
import Data.Hashable
import qualified Data.HashTable.ST.Basic as HT
import Data.Maybe (fromMaybe)
count :: (Eq a, Hashable a) => HT.HashTable s a Int -> a -> ST s Int
count ht x = liftM (fromMaybe 0) (HT.lookup ht x)
add :: (Eq a, Hashable a) => HT.HashTable s a Int -> a -> ST s ()
add ht x = count ht x >>= HT.insert ht x . (+ 1)
uniq :: (Eq a, Hashable a) => [a] -> Maybe a
uniq xs = runST $ do
-- Count all elements into a hash table:
ht <- HT.newSized (length xs)
forM_ xs (add ht)
-- Find the first one with count 1
first (\x -> liftM (== 1) (count ht x)) xs
-- Monadic variant of find which exists once an element is found.
first :: (Monad m) => (a -> m Bool) -> [a] -> m (Maybe a)
first p = f
where
f [] = return Nothing
f (x:xs') = do
b <- p x
if b then return (Just x)
else f xs'
Notes:
If you know that there will be only a small number of distinct elements in the list, you could use HT.new instead of HT.newSized (length xs). This will save you some memory and one pass over xs but in the case of many distinct elements the hash table will be have to resized several times.
Here is a version that does the trick:
unique :: Eq a => [a] -> [a]
unique = select . collect []
where
collect acc [] = acc
collect acc (x : xs) = collect (insert x acc) xs
insert x [] = [[x]]
insert x (ys#(y : _) : yss)
| x == y = (x : ys) : yss
| otherwise = ys : insert x yss
select [] = []
select ([x] : _) = [x]
select ((_ : _) : xss) = select xss
So, first we traverse the input list (collect) while maintaining a list of buckets of equal elements that we update with insert. Then we simply select the first element that appears in a singleton bucket (select).
The bad news is that this takes quadratic time: for every visited element in collect we need to go over the list of buckets. I am afraid that is the price you will have to pay for only being able to constrain the element type to be in Eq.
Something like this look pretty good.
unique = fst . foldl' (\(a, b) c -> if (c `elem` b)
then (a, b)
else if (c `elem` a)
then (delete c a, c:b)
else (c:a, b)) ([],[])
The first element of the resulted tuple of the fold, contain what you are expecting, a list containing unique element. The second element of the tuple is the memory of the process remembered if an element has already been discarded or not.
About space performance.
As your problem is design, all the element of the list should be traversed at least one time, before a result can be display. And the internal algorithm must keep trace of discarded value in addition to the good one, but discarded value will appears only one time. Then in the worst case the required amount of memory is equal to the size of the inputted list. This sound goods as you said that expected input are small.
About time performance.
As the expected input are small and not sorted by default, trying to sort the list into the algorithm is useless, or before to apply it is useless. In fact statically we can almost said, that the extra operation to place an element at its ordered place (into the sub list a and b of the tuple (a,b)) will cost the same amount of time than to check if this element appear into the list or not.
Below a nicer and more explicit version of the foldl' one.
import Data.List (foldl', delete, elem)
unique :: Eq a => [a] -> [a]
unique = fst . foldl' algorithm ([], [])
where
algorithm (result0, memory0) current =
if (current `elem` memory0)
then (result0, memory0)
else if (current`elem` result0)
then (delete current result0, memory)
else (result, memory0)
where
result = current : result0
memory = current : memory0
Into the nested if ... then ... else ... instruction the list result is traversed twice in the worst case, this can be avoid using the following helper function.
unique' :: Eq a => [a] -> [a]
unique' = fst . foldl' algorithm ([], [])
where
algorithm (result, memory) current =
if (current `elem` memory)
then (result, memory)
else helper current result memory []
where
helper current [] [] acc = ([current], [])
helper current [] memory acc = (acc, memory)
helper current (r:rs) memory acc
| current == r = (acc ++ rs, current:memory)
| otherwise = helper current rs memory (r:acc)
But the helper can be rewrite using fold as follow, which is definitely nicer.
helper current [] _ = ([current],[])
helper current memory result =
foldl' (\(r, m) x -> if x==current
then (r, current:m)
else (current:r, m)) ([], memory) $ result