I'm writing myself a GUI utility for use in a CMD window to navigate between folders,
rather in the style of the old Norton Change Directory utility for DOS.
When run, the app pops up a folder tree to allow the user to select a folder to which
to navigate and then closes and returns to the CMD prompt. At the moment, the way it
works is that it is run as the first command in a "main" batch file. It writes a secondary batch
file, in my app's folder under AppData, containing the commands to change drive and
directory to the folder the user selected, and the main batch file then invokes this
second batch file using CALL.
It works fine, but this way of actually changing the CMD window's current directory
strikes me as inelegant both from the point of view of needing to be run from a batch file
(so that the user's selection can be acted upon after my app has closed) and of
needing the secondary batch file to do the actual navigation.
So, my question is, how can my app send the instructions to the instance of CMD
that owns the window in which the app is run to the folder the user selected? I've tried doing a ShellExecute
of "CMD /K ..." but although that does indeed navigate to the
selected folder, it does so in a new CMD window, not the one my app is run in. The
conceptual gap I have is how to get the current CMD to act on my app's instructions
after my app has terminated.
Fwiw, I thought of trying to write the user's folder selection into an environment variable in the CMD window's environment for the CMD processor to
act upon from there, but this seems to require that the CMD window be opened via "Run as Administrator", which I definitely don't want.
Your program cannot influence the environment variables of the command interpreter because they're separate processes. Your program cannot change the directory of the command interpreter directly, either, because, again, they're separate processes.
You need to use a batch file because the command interpreter executes batch files internally. Since it's all the same process, the batch file has the power to change the current directory, and for that change to remain in effect after the batch file finishes running.
Therefore, you need some way for your interactive program to communicate the directory selection back to the batch file so that it can act on it.
Instead of writing the instructions to another batch file, you could write the result to standard output. Have the batch file capture that output into a variable, and then execute cd on that variable. The batch code would look something like this:
for /f "tokens=*" %%a in ('[select_dir.exe]') do (
set DIRSELECTION=%%a
)
cd /d %DIRSELECTION%
Your Delphi code would look like this:
writeln(selected_dir);
To allow that command to work, you'll need to make sure your program is marked as a console program, as with {$APPTYPE CONSOLE}. If it's not, then the batch file won't receive any output, and probably won't even wait for your program to finish running before proceeding. It's OK for a console program to display a TForm, just like a GUI program.
Related
I need to run some .bat files from Cygwin. Until now, these bat files didn't required any param, so I used the following method:
chmod +x $strBatFilename
cygstart "$WINDIR/explorer.exe" "$strBatFilename"
These commands implement 2 features that I need:
The .bat file is opened in a new window
The environment of the new window is the explorer's one, not the one of Cygwin
The problem that I have is that now I need to also pass a parameter to the bat file.
I don't know of a method to call explorer.exe with a file (my bat) as parameter and having some extra option to pass another parameter to the bat (sounds like passing a parameter to a parameter of explorer.exe).
I have searched and found that I can start a cmd.exe. I tried starting it directly or starting it using cygstart:
cygstart $WINDIR/system32/cmd.exe /c start "$strBatFilename $strBatParam"
I have managed to make it start in a new window and launch the .bat with a parameter, but the environment is not the explorer's one.
I don't know the exact differences between the two environments. What makes me say they are different is that when for example the bat contains a repo sync command, if it's open with explorer it runs the repo sync command smoothly, while if the bat is called from cmd.exe, the repo sync command will ask for my user name and email.
So, my question is: are you aware of any command that will start from Cygwin a .bat file
passing a parameter to it
opening it in a new window
having the new window inherit the explorer's environment ?
Thank you
When I was trying to get elevated rights for my batch script, when I found two related SO questions
How to request Administrator access inside a batch file
How can I auto-elevate my batch file, so that it requests from UAC administrator rights if required?
...that led to answers that worked partially. For some reason, I had issues with command line passing for file path arguments containing spaces within the VBS script, so I tried to break the solution into 3 parts and concentrated on the inner (VBS) step, then adding the last step by calling a batch from that VBS which could not be found, despite in the same folder as the VBS script. I found that drag & drop isn't "that easy" and that it's different when using .vbs instead of .bat or .exe as drop targets.
Here is my actual question:
If I drag a file and drop it onto an executable (exe) or batch file (bat, cmd), The current working directory is determined by the source of the dragged item. Its directory is set as the working directory for the program or script that processes it.
If I drop a file onto a VBS script, it's different. On Windows 8.1 x64 I observe it to be C:\Windows\System32 even if the argument resides in the same folder as the VBS.
I can simply use a batch file (as drag'n'drop relay) like this
my.vbs %*
to get "the normal" .bat behaviour (drop source dictates CWD), but I also want to understand it.
Is it a bug or a feature? Is it consistent over all Windows versions?
edit: added the background (on top) for the question showing how I got there (+minor corrections)
After some API monitoring, this is what I see
When you drop a file over a .exe file the explorer.exe uses CreateProcess API function to start the process, passing the executable as lpApplicationName, and the executable and dropped file as lpCommandLine. The lpCurrentDirectory is set in the function call by the caller process to the folder containing the dropped file[1].
When you drop a file over a .cmd file the explorer.exe also uses CreateProcess API, but in this case the lpApplicationName is null and the lplCommandLine contains the batch file and the dropped file. lpCurrentDirectory is also set to the parent folder of the dropped file[1].
When you drop a file over a .vbs file, ShellExecuteEx is used and the lpDirectory field of the SHELLEXECUTEINFO structure is null, so, the process created inherits the current active directory of the parent process. By default the current active directory of the explorer.exe process is %systemroot%\system32, but it is possible to start a explorer instance with a different current active directory that will be inherited in this kind of drop operations.
[1] If we drop more than one file, the path of the file passed as first argument is used
note just for information: to test the active directory inherit the process followed was:
Open a cmd instance and change the current active directory to c:\temp
Kill all explorer.exe instances
From the cmd instance call explorer.exe. This explorer instance has the active directory in the cmd window as its current active directory.
The Arguments property holds the full paths to all items dropped on the script, so you can determine the directory of each dropped item like this:
Set fso = CreateObject("Scripting.FileSystemObject")
For Each item In WScript.Arguments
WScript.Echo fso.GetParentFolderName(item)
Next
Assuming that the working directory would be defined by what is dropped onto a script is a misguided approach. If you require that logic you can implement it in the script yourself, though, e.g. like this:
Set fso = CreateObject("Scripting.FileSystemObject")
Set sh = CreateObject("WScript.Shell")
For Each item In WScript.Arguments
sh.CurrentDirectory = fso.GetParentFolderName(item)
'working directory is now the parent folder of the current item
'...
Next
If you need the working directory to be the parent directory of the VBScript file you can derive that from the ScriptFullName property:
Set fso = CreateObject("Scripting.FileSystemObject")
WScript.Echo fso.GetParentFolderName(WScript.ScriptFullName)
If I lookup the file types in the Windows registry, I see the following in their Shell\Open\Command values:
batfile: "%1" %*
cmdfile: "%1" %*
exefile: "%1" %*
VBSFile: "%SystemRoot%\System32\WScript.exe" "%1" %*
This seems to suggest that bat, cmd, exe are treated as executable on their own, maybe for historical reasons, whereas VBS is considered an ordinary script, that is only executable because its extension is registered with some executable to be called to interpret it. Pretty much the same as Python or Perl.
[Update] Indeed I proved that a Python script shows exactly the same behaviour as my VBS script: calling it from the command line providing arguments keeps the CWD, dropping a file on it causes the CWD to be C:\Windows\System32. So my question seems to be sort of wrong, but finally it helped people to point me into the right direction for further research...
c:\windows\system32\CScript.exe or c:\windows\system32\Wscript.exe are the programs that run vbscript. As you can see they are in system32.
Windows uses ShellExecuteEx to start programs - see it's rules at MSDN: ShellExecuteEx function (Windows)
ShellExecuteEx uses CreateProcess (CreateProcessEx) to actually start a program. CreateProcess function (Windows)
Edit
CMD doesn't use the registry for it's own stuff. Those registry entries are for programs other than CMD.
CMD main goal is to be MS Dos 5 compatible while enhancing it, it will correctly run most DOS batch files. It was written by IBM engineers working on OS/2 NOT Windows.
Edit 2
The core of your problem is that you are attempting to write programs as if you are a user typing to operate a computer.
As a programmer you don't make assumptions. The easiest way to not take assumptions is to specify full paths to what you want. Your batch file shouldn't care what the current directory is. EG In CMD there is a current directory per drive for compatibility with MSDos 5 (and programs in a console tend to share them but don't have to). In Windows there is one current directory per program. The default current directory has changed over the years.
The only time you should work with the current directory is if you are writing a batchfile for a user to use. EG If you type dir it does the current directory, a batchfile meant to be a general command should work the same way.
I have a .exe file converted from a .jar.
It is a command based application, so I have to start it with a batch script. Here is the batch script:
#echo off
cd C:\desktop\plant-text-adventure-win
start planttextadventure
pause
When I double click on the batch script, this happens: Windows could not find 'planttextadventure'. Please confirm if you have input the correct name and retry.
I don't know what is happening, I have no idea about cmd as I use Mac, but I can confirm I have an executable called planttextadventure.exe in a folder called plant-text-adventure-win.
You should test your batch file by executing it within a shell.
Simply enter within the start menu the command cmd to open up a shell. Within this black box you could now simply enter the commands from your batch script and lookout for some error message.
If you look at your script I would guess that the cd command (to change the current directory) is not correct. Maybe you should replace it with
cd %USERPROFILE%\Desktop\plant-text-adventure-win
because the desktop folder is on a default installation not directly under the root drive but within the user profile available.
Another solution to get this thing to work, is by opening the windows explorer, going to the .exe file you wish to execute and drag & drop the .exe file with a right mouse click onto the desktop.
Then a context menu appears and you select the option Create shortcut here.
I am a beginner in VBScript. I googled it & got to know that we can run VBScript from command line by executing below command:
For Example my vbscript name is Converter.vbs & it's present in folder D:\VBS.
I can run it through following methods:
CScript "D:\VBS\Converter.vbs"
OR
WScript "D:\VBS\Converter.vbs"
Now I would like to execute above VBScript without Cscript or Wscript command by simply typing the name of VBscript name i.e. Converter.
I DON'T WANT TO SPECIFY THE FULL PATH OF VBSCRIPT EVERYTIME.
Can anyone please guide me on how to do that ?
I'll break this down in to several distinct parts, as each part can be done individually. (I see the similar answer, but I'm going to give a more detailed explanation here..)
First part, in order to avoid typing "CScript" (or "WScript"), you need to tell Windows how to launch a * .vbs script file. In My Windows 8 (I cannot be sure all these commands work exactly as shown here in older Windows, but the process is the same, even if you have to change the commands slightly), launch a console window (aka "command prompt", or aka [incorrectly] "dos prompt") and type "assoc .vbs". That should result in a response such as:
C:\Windows\System32>assoc .vbs
.vbs=VBSFile
Using that, you then type "ftype VBSFile", which should result in a response of:
C:\Windows\System32>ftype VBSFile
vbsfile="%SystemRoot%\System32\WScript.exe" "%1" %*
-OR-
C:\Windows\System32>ftype VBSFile
vbsfile="%SystemRoot%\System32\CScript.exe" "%1" %*
If these two are already defined as above, your Windows' is already set up to know how to launch a * .vbs file. (BTW, WScript and CScript are the same program, using different names. WScript launches the script as if it were a GUI program, and CScript launches it as if it were a command line program. See other sites and/or documentation for these details and caveats.)
If either of the commands did not respond as above (or similar responses, if the file type reported by assoc and/or the command executed as reported by ftype have different names or locations), you can enter them yourself:
C:\Windows\System32>assoc .vbs=VBSFile
-and/or-
C:\Windows\System32>ftype vbsfile="%SystemRoot%\System32\WScript.exe" "%1" %*
You can also type "help assoc" or "help ftype" for additional information on these commands, which are often handy when you want to automatically run certain programs by simply typing a filename with a specific extension. (Be careful though, as some file extensions are specially set up by Windows or programs you may have installed so they operate correctly. Always check the currently assigned values reported by assoc/ftype and save them in a text file somewhere in case you have to restore them.)
Second part, avoiding typing the file extension when typing the command from the console window.. Understanding how Windows (and the CMD.EXE program) finds commands you type is useful for this (and the next) part. When you type a command, let's use "querty" as an example command, the system will first try to find the command in it's internal list of commands (via settings in the Windows' registry for the system itself, or programmed in in the case of CMD.EXE). Since there is no such command, it will then try to find the command in the current %PATH% environment variable. In older versions of DOS/Windows, CMD.EXE (and/or COMMAND.COM) would automatically add the file extensions ".bat", ".exe", ".com" and possibly ".cmd" to the command name you typed, unless you explicitly typed an extension (such as "querty.bat" to avoid running "querty.exe" by mistake). In more modern Windows, it will try the extensions listed in the %PATHEXT% environment variable. So all you have to do is add .vbs to %PATHEXT%. For example, here's my %PATHEXT%:
C:\Windows\System32>set pathext
PATHEXT=.PLX;.PLW;.PL;.BAT;.CMD;.VBS;.COM;.EXE;.VBE;.JS;.JSE;.WSF;.WSH;.MSC;.PY
Notice that the extensions MUST include the ".", are separated by ";", and that .VBS is listed AFTER .CMD, but BEFORE .COM. This means that if the command processor (CMD.EXE) finds more than one match, it'll use the first one listed. That is, if I have query.cmd, querty.vbs and querty.com, it'll use querty.cmd.
Now, if you want to do this all the time without having to keep setting %PATHEXT%, you'll have to modify the system environment. Typing it in a console window only changes it for that console window session. I'll leave this process as an exercise for the reader. :-P
Third part, getting the script to run without always typing the full path. This part, in relation to the second part, has been around since the days of DOS. Simply make sure the file is in one of the directories (folders, for you Windows' folk!) listed in the %PATH% environment variable. My suggestion is to make your own directory to store various files and programs you create or use often from the console window/command prompt (that is, don't worry about doing this for programs you run from the start menu or any other method.. only the console window. Don't mess with programs that are installed by Windows or an automated installer unless you know what you're doing).
Personally, I always create a "C:\sys\bat" directory for batch files, a "C:\sys\bin" directory for * .exe and * .com files (for example, if you download something like "md5sum", a MD5 checksum utility), a "C:\sys\wsh" directory for VBScripts (and JScripts, named "wsh" because both are executed using the "Windows Scripting Host", or "wsh" program), and so on. I then add these to my system %PATH% variable (Control Panel -> Advanced System Settings -> Advanced tab -> Environment Variables button), so Windows can always find them when I type them.
Combining all three parts will result in configuring your Windows system so that anywhere you can type in a command-line command, you can launch your VBScript by just typing it's base file name. You can do the same for just about any file type/extension; As you probably saw in my %PATHEXT% output, my system is set up to run Perl scripts (.PLX;.PLW;.PL) and Python (.PY) scripts as well. (I also put "C:\sys\bat;C:\sys\scripts;C:\sys\wsh;C:\sys\bin" at the front of my %PATH%, and put various batch files, script files, et cetera, in these directories, so Windows can always find them. This is also handy if you want to "override" some commands: Putting the * .bat files first in the path makes the system find them before the * .exe files, for example, and then the * .bat file can launch the actual program by giving the full path to the actual *. exe file. Check out the various sites on "batch file programming" for details and other examples of the power of the command line.. It isn't dead yet!)
One final note: DO check out some of the other sites for various warnings and caveats. This question posed a script named "converter.vbs", which is dangerously close to the command "convert.exe", which is a Windows program to convert your hard drive from a FAT file system to a NTFS file system.. Something that can clobber your hard drive if you make a typing mistake!
On the other hand, using the above techniques you can insulate yourself from such mistakes, too. Using CONVERT.EXE as an example.. Rename it to something like "REAL_CONVERT.EXE", then create a file like "C:\sys\bat\convert.bat" which contains:
#ECHO OFF
ECHO !DANGER! !DANGER! !DANGER! !DANGER, WILL ROBINSON!
ECHO This command will convert your hard drive to NTFS! DO YOU REALLY WANT TO DO THIS?!
ECHO PRESS CONTROL-C TO ABORT, otherwise..
REM "PAUSE" will pause the batch file with the message "Press any key to continue...",
REM and also allow the user to press CONTROL-C which will prompt the user to abort or
REM continue running the batch file.
PAUSE
ECHO Okay, if you're really determined to do this, type this command:
ECHO. %SystemRoot%\SYSTEM32\REAL_CONVERT.EXE
ECHO to run the real CONVERT.EXE program. Have a nice day!
You can also use CHOICE.EXE in modern Windows to make the user type "y" or "n" if they really want to continue, and so on.. Again, the power of batch (and scripting) files!
Here's some links to some good resources on how to use all this power:
http://ss64.com/
http://www.computerhope.com/batch.htm
http://commandwindows.com/batch.htm
http://www.robvanderwoude.com/batchfiles.php
Most of these sites are geared towards batch files, but most of the information in them applies to running any kind of batch (* .bat) file, command (* .cmd) file, and scripting (* .vbs, * .js, * .pl, * .py, and so on) files.
When entering the script's full file spec or its filename on the command line, the shell will use information accessibly by
assoc | grep -i vbs
.vbs=VBSFile
ftype | grep -i vbs
VBSFile=%SystemRoot%\System32\CScript.exe "%1" %*
to decide which program to run for the script. In my case it's cscript.exe, in yours it will be wscript.exe - that explains why your WScript.Echos result in MsgBoxes.
As
cscript /?
Usage: CScript scriptname.extension [option...] [arguments...]
Options:
//B Batch mode: Suppresses script errors and prompts from displaying
//D Enable Active Debugging
//E:engine Use engine for executing script
//H:CScript Changes the default script host to CScript.exe
//H:WScript Changes the default script host to WScript.exe (default)
//I Interactive mode (default, opposite of //B)
//Job:xxxx Execute a WSF job
//Logo Display logo (default)
//Nologo Prevent logo display: No banner will be shown at execution time
//S Save current command line options for this user
//T:nn Time out in seconds: Maximum time a script is permitted to run
//X Execute script in debugger
//U Use Unicode for redirected I/O from the console
shows, you can use //E and //S to permanently switch your default host to cscript.exe.
If you are so lazy that you don't even want to type the extension, make sure that the PATHEXT environment variable
set | grep -i vbs
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.py;.pyw;.tcl;.PSC1
contains .VBS and there is no Converter.cmd (that converts your harddisk into a washing machine) in your path.
Update wrt comment:
If you 'don't want to specify the full path of my vbscript everytime' you may:
put your CONVERTER.VBS in a folder that is included in the PATH environment variable; the shell will then search all pathes - if necessary taking the PATHEXT and the ftype/assoc info into account - for a matching 'executable'.
put a CONVERTER.BAT/.CMD into a path directory that contains a line like cscript p:\ath\to\CONVERTER.VBS
In both cases I would type out the extension to avoid (nasty) surprises.
I am wondering why you cannot put this in a batch file. Example:
cd D:\VBS\
WSCript Converter.vbs
Put the above code in a text file and save the text file with .bat extension. Now you have to simply run this .bat file.
Why don't you just stash the vbscript in a batch/vbscript file hybrid. Name the batch hybrid Converter.bat and you can execute it directly as Converter from the cmd line. Sure you can default ALL scripts to run from Cscript or Wscript, but if you want to execute your vbs as a windows script rather than a console script, this could cause some confusion later on. So just set your code to a batch file and run it directly.
Check the answer -> Here
And here is an example:
Converter.bat
::' VBS/Batch Hybrid
::' --- Batch portion ---------
rem^ &#echo off
rem^ &call :'sub
rem^ &exit /b
:'sub
rem^ &echo begin batch
rem^ &cscript //nologo //e:vbscript "%~f0"
rem^ &echo end batch
rem^ &exit /b
'----- VBS portion -----
Dim tester
tester = "Convert data here"
Msgbox tester
You may follow the following steps:
Open your CMD(Command Prompt)
Type 'D:' and hit Enter. Example: C:\Users\[Your User Name]>D:
Type 'CD VBS' and hit Enter. Example: D:>CD VBS
Type 'Converter.vbs' or 'start Converter.vbs' and hit Enter. Example: D:\VBS>Converter.vbs Or D:\VBS>start Converter.vbs
It is very stupid that windows will not let you add batch files to your quick launch or whatever they call in in windows 7. That bar across the bar, i can attach firefox there, command prompt, even paint (my favorite), but not a batch file. I can "pin" it to another program, which is just weird. I want it to standalone, the batch file does enough work by itself.
So lets say i have batch file. What is the simplest executable program I can write to invoke said script. Then I can finally pin all my useful batch files on that quick-jump-pin-bar.
If I remember right, you can do this by first pinning a shortcut to CMD.exe to the taskbar. Then edit the command, and change CMD.exe to CMD.exe /c MyBatchFile.bat. I believe this will execute the batch file.
Since you can only pin one cmd, here's an alternative, assuming you have the .NET framework installed - a very simple C# application:
Populate a textfile with the following contents:
class Program {
static void Main() {
System.Diagnostics.Process.Start(#"c:\test.bat");
}
}
where Program is the name of the executable you want to create, and c:\test.bat is the full path to the batch file. Save the file as Program.cs. Execute the following from the command line:
c:\Windows\Microsoft.NET\Framework\v2.0.50727\csc.exe Program.cs
You can replace 2.0.50727 with whatever directory exists on your machine - might be 1.1.something or 3.5 or 4.0.something - it's all the same for this scenario.
This will generate Program.exe. You can put that exe file wherever you want, and pin that executable to the taskbar. You can discard the .cs file once you're done making your executables.
Kind of a crappy solution, but it should work, assuming you don't find anything better. And if you don't have the .NET framework (which I'm not sure is even possible in Windows 7), you can install it pretty easily.
The easiest way is to create a folder, put your batch files in it, and pin the folder to the menu bar :D
You can also write a startup script, so the batch file will be executed on startup, but I don't know if you want to run those scripts on every bootup... You can also add the command prompt to the bar, and edit the startup path..
Use command switches on CMD.exe.
cmd.exe /c "myscript.bat"
As a sort of workaround you could use the following trick. Pin an arbitrary application to the task bar, Shift+right click on the pinned icon, select Properties, change 'Target' and 'Start in' accordingly. Rename it too if you like.
You can pin more than one .bat file using this technique.