On starting TeamCity from URL, I get following error :
It was working fine till last week. And when opened today, it is showing error.
I logged in as administrator to view logs. Below is the stacktrace :
<pre>jetbrains.buildServer.processes.ProcessTreeTerminatorException: Process has not exited within 30 seconds
at jetbrains.buildServer.processes.ProcessTreeTerminatorImplBase.readCommandOutput(ProcessTreeTerminatorImplBase.java:159)
at jetbrains.buildServer.processes.ProcessTreeTerminatorImplBase.buildProcessTree(ProcessTreeTerminatorImplBase.java:315)
at jetbrains.buildServer.processes.ProcessTreeTerminatorImplBase.getProcessVisitor(ProcessTreeTerminatorImplBase.java:82)
at jetbrains.buildServer.processes.ProcessTreeTerminatorImplBase.getCurrentPid(ProcessTreeTerminatorImplBase.java:28)
at jetbrains.buildServer.processes.ProcessTreeTerminator$1.getCurrentPid(ProcessTreeTerminator.java:144)
at jetbrains.buildServer.processes.ProcessTreeTerminator.getCurrentPid(ProcessTreeTerminator.java:101)
at jetbrains.buildServer.maintenance.StartupProcessor.createPidFile(StartupProcessor.java:476)
at jetbrains.buildServer.maintenance.StartupProcessor.doInitialStage(StartupProcessor.java:326)
at jetbrains.buildServer.maintenance.StartupProcessor.processConcreteStage(StartupProcessor.java:83)
at jetbrains.buildServer.maintenance.StartupProcessor.processConcreteStageSafe(StartupProcessor.java:503)
at jetbrains.buildServer.maintenance.StartupProcessor.processTeamCityLifecycle(StartupProcessor.java:558)
at jetbrains.buildServer.maintenance.StartupProcessor.access$000(StartupProcessor.java:92)
at jetbrains.buildServer.maintenance.StartupProcessor$1.run(StartupProcessor.java:2)
at java.lang.Thread.run(Thread.java:745)
Some more information :
Current Startup State
Startup status
Current step: TeamCity server startup error
Next step: not defined yet
Data Directory
Data Directory path is not specified/detected yet
Database
Not connected to the database yet.
Versions
Software version: 722
Data directory version: unknown
Database version: unknown
Logs
Logs path: C:\TeamCity\logs
What should be done to resolve error?
As this is an EAP build, you should report this issue to JetBrains with complete information logs here
Related
When i run msdeploy from teamcity i get ERROR_CONNECTION_TERMINATED. But if i run it from cmd on the same server (where teamcity is running) it goes through. ERROR_CONNECTION_TERMINATED occours only if site is up to date, if it has to do alot of stuff then there is no error.
I'm not running fiddler that could be causing this.
Here is command:
msdeploy -verb:sync -source:contentPath="%teamcity.build.checkoutDir%\publish\web" -dest:contentPath="%DeployPath%\web",ComputerName="%MSDeploy.ComputerName%",Username="%MSDeploy.Username%",Password="%MSDeploy.Password%",AuthType="Basic" -useCheckSum -skip:Directory="\\web\\uploads$" -skip:File="\\app_offline.htm$" -allowUntrusted
Output:
[11:32:15][Step 9/9] PowerShell Executable:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
[11:32:15][Step 9/9] Working directory:
C:\TeamCity\buildAgent\work\81d93b891723185
[11:32:15][Step 9/9] Command:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
[11:32:15][Step 9/9] PowerShell arguments: -NonInteractive,
-ExecutionPolicy, ByPass, -File, C:\TeamCity\buildAgent\temp\buildTmp\powershell4517896340075893898.ps1
[11:32:16][Step 9/9] Info: Using ID
'a6102aa0-ae6b-43b5-9f15-5a6c0977232f' for connections to the remote
server.
[11:32:17][Step 9/9] Info: Object filePath
(C:\inetpub\dev.proplatform\web\app_offline.htm) skipped due to skip
directive 'CommandLineSkipDirective 2'.
[11:32:27][Step 9/9] Info: Object filePath
(C:\inetpub\dev.proplatform\web\ePeroWs\app_offline.htm) skipped due
to skip directive 'CommandLineSkipDirective 2'.
[11:32:27][Step 9/9] Info: Object filePath
(C:\inetpub\dev.proplatform\web\ipsWebApi\app_offline.htm) skipped due
to skip directive 'CommandLineSkipDirective 2'.
[11:32:37][Step 9/9] Info: Object dirPath
(C:\inetpub\dev.proplatform\web\uploads) skipped due to skip directive
'CommandLineSkipDirective 1'.
[11:32:37][Step 9/9] Info: Using ID
'98d4de3d-2ed9-4a43-b156-ebf69bac99dc' for connections to the remote
server.
[11:33:13][Step 9/9] Error Code: ERROR_CONNECTION_TERMINATED
[11:33:13][Step 9/9] More Information: Web Deploy experienced a
connection problem with the server and had to terminate the
connection. Contact your server administrator if the problem
persists. Learn more at:
https://go.microsoft.com/fwlink/?LinkId=221672#ERROR_CONNECTION_TERMINATED.
[11:33:13][Step 9/9] Error: Unexpected end of file has occurred. The
following elements are not closed: results. Line 1, position 550.
[11:33:13][Step 9/9] Error count: 1.
I tried running command in cmd and powershell on teamcity. I got error on TC, but if i run command directlly in cmd or powershell on the same server i got no error.
I found what the problem was. It was Windows real time protection which was cousing this problem. So i added process msdeploy.exe as an exception and now it works fine.
I hope this helps somebody in the future. I spent days trying to figure it out what the problem was.
I am trying to get started on Corda on Windows and I am following the started guides using the following docs:
https://docs.corda.net/quickstart-index.html#setting-up-a-development-environment
https://vimeo.com/217462250
https://docs.corda.net/getting-set-up.html
I have downloaded all the latest version (as of 22.09.19) of Git (2.23.0, 64-bit version) / Java JDK (jdk-8u221-windows-x64.exe) / and the latest IntelliJ.
However I am facing the following issues:
When I open the 'Event Log' I don't see any messages event gradle message
Also when I try and run the Nodes from Intellj > Run CordaApps Kotlin I get the following error message:
When I try and run the nodes from the Git bash terminal
Jatin#LAPTOP-16QRBJDJ MINGW64 ~/cordapp-tutorial (release-V3)
$ ./gradlew.bat deployNodes
Starting a Gradle Daemon, 1 stopped Daemon could not be reused, use --status for details
:java-source:compileJava UP-TO-DATE
:java-source:processResources UP-TO-DATE
:java-source:classes UP-TO-DATE
:java-source:configureCordappFatJar
:java-source:jar UP-TO-DATE
:java-source:deployNodes
Bootstrapping local network in C:\Users\Jatin\cordapp-tutorial\java-source\build\nodes
Node config files found in the root directory - generating node directories
Generating directory for Notary
Generating directory for PartyA
Generating directory for PartyB
Generating directory for PartyC
Nodes found in the following sub-directories: [Notary, PartyA, PartyB, PartyC]
Waiting for all nodes to generate their node-info files...
:java-source:deployNodes FAILED
FAILURE: Build failed with an exception.
* What went wrong:
Execution failed for task ':java-source:deployNodes'.
> Node in Notary exited with 1 when generating its node-info - see logs in C:\Users\Jatin\cordapp-tutorial\java-source\build\nodes\Notary\logs
* Try:
Run with --stacktrace option to get the stack trace. Run with --info or --debug option to get more log output. Run with --scan to get full insights.
* Get more help at https://help.gradle.org
BUILD FAILED in 23s
5 actionable tasks: 2 executed, 3 up-to-date
The log:
CAPSULE EXCEPTION: Illegal char <"> at index 34: C:\Program Files\Java\jdk1.7.0\bin" (for stack trace, run with -Dcapsule.log=verbose)
USAGE: <options> corda.jar
Actions:
capsule.version - Prints the capsule and application versions.
capsule.modes - Prints all available capsule modes.
capsule.jvms - Prints a list of all JVM installations found.
capsule.help - Prints this help message.
Options:
capsule.mode=<value> - Picks the capsule mode to run.
capsule.reset - Resets the capsule cache before launching. The capsule to be re-extracted (if applicable), and other possibly cached files will `enter code here`be recreated.
capsule.log=<value> (default: quiet) - Picks a log level. Must be one of none, quiet, verbose, or debug.
capsule.java.home=<value> - Sets the location of the Java home (JVM installation directory) to use; If 'current' forces the use of the JVM that launched the capsule.
capsule.java.cmd=<value> - Sets the path to the Java executable to use.
capsule.jvm.args=<value> - Sets additional JVM arguments to use when running the application."
Have you set Java classpath to point to jdk1.8.0_221?
From the log record it seems that the jdk is 1.7. Corda require at least version 8u171. Please check the classpath and installed java version.
You should add Java to the PATH environment variable by following the instructions in the Oracle documentation - "https://docs.oracle.com/javase/7/docs/webnotes/install/windows/jdk-installation-windows.html#path"
Which java variant you are using?
If it is Adopt OpenJDK 8, use HotSpot JVM not the OpenJ9 Version.
Here is the link for windows x64 AdoptOpenJDK 8
I have a blocking issue installing openwhisk with docker
I typed make quick-start right after a git pull of the project incubator-openwhisk-devtools. My OS is Fedora 29, docker version is 18.09.0, docker-compose version is 1.22.0. JDk 8 Oracle.
I get the following error:
[...]
adding the function to whisk ...
ok: created action hello
invoking the function ...
error: Unable to invoke action 'hello': The server is currently unavailable (because it is overloaded or down for maintenance). (code ciOZDS8VySDyVuETF14n8QqB9wifUboT)
[...]
[ERROR] [#tid_sid_unknown] [Invoker] failed to ping the controller: org.apache.kafka.common.errors.TimeoutException: Expiring 1 record(s) for health-0: 30069 ms has passed since batch creation plus linger time
[ERROR] [#tid_sid_unknown] [KafkaProducerConnector] sending message on topic 'health' failed: Expiring 1 record(s) for health-0: 30009 ms has passed since batch creation plus linger time
Please note that controller-local-logs.log is never created.
If I issue a touch controller-local-logs.log in the right directory the log file is always empty after I try to issue make quick-start again.
http://localhost:8888/ping gives me the right answer: pong.
http://localhost:9222 is not reacheable.
Where am I wrong?
Thank you in advance
I am using MSBuild. I have Java 8 installed.
I am running the following commands:
SonarQube.Scanner.MSBuild.exe begin /k:"ABC" /d:sonar.host.url="http://localhost:9000" /d:sonar.login="8b839xxxxxxxxxxxxxxxxxxxxxxx6b00125bf92" /d:sonar.verbose=true
"C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\MSBuild\15.0\Bin\msbuild.exe" /t:rebuild
SonarQube.Scanner.MSBuild.exe end /d:sonar.login="8b839xxxxxxxxxxxxxxxxxxxxxxx6b00125bf92"
The last step fails:
ERROR: Error during SonarQube Scanner execution
ERROR: The 'report' parameter is missing
ERROR:
ERROR: Re-run SonarQube Scanner using the -X switch to enable full debug logging.
The SonarQube Scanner did not complete successfully
12:53:21.909 Creating a summary markdown file...
12:53:21.918 Post-processing failed. Exit code: 1
The MSBuild version is greater than 14.
Java 8 is properly installed. Documentation indicates that Java 8 is adequate.
Any idea on what could be wrong?
Where do I add the -X switch? I tried on all 3 statements
Update :I installed Java SDK 9. Still same issue.
Update :With verbose logging and using /n naming parameter:
INFO: Analysis report generated in 992ms, dir size=4 MB
INFO: Analysis reports compressed in 549ms, zip size=1 MB
INFO: Analysis report generated in C:\ABC\.sonarqube\out\.sonar\scanner-report
DEBUG: Upload report
DEBUG: POST 400 http://localhost:9000/api/ce/submit?projectKey=ABC | time=1023ms
INFO: ------------------------------------------------------------------------
INFO: EXECUTION FAILURE
INFO: ------------------------------------------------------------------------
INFO: Total time: 54.833s
INFO: Final Memory: 51M/170M
INFO: ------------------------------------------------------------------------
DEBUG: Execution getVersion
DEBUG: Execution stop
ERROR: Error during SonarQube Scanner execution
ERROR: The 'report' parameter is missing
ERROR:
ERROR: Re-run SonarQube Scanner using the -X switch to enable full debug logging.
Process returned exit code 1
The SonarQube Scanner did not complete successfully
Creating a summary markdown file...
Post-processing failed. Exit code: 1
I've struggled the same problem with SonarQube and I've finally found a solution:
You need to restart sonar service after using evaluation token.
Please note this isn't the answer, however I feel this feedback is valuable to getting this question answered.
I can reproduce this issue in POSTMan with a POST request to:
http://localhost:9000/api/ce/submit?projectKey=myProjectKey
This returns
{
"errors": [
{
"msg": "The 'report' parameter is missing"
}
]
}
You can get a similar error by removing the projectKey query parameter. I tried adding a report query parameter and received the same error:
http://localhost:9000/api/ce/submit?projectKey=brian3016&report=report
Given this, I feel there is a problem with their code. It should have included a report parameter when creating the POST request, but it failed to do so.
Verbose output seems to have changed from using the -X switch to /d:sonar.verbose=true. E.G.
SonarScanner.MSBuild.exe begin /k:"myProjectKey" /d:sonar.host.url="http://localhost:9000" /d:sonar.login="myLogin" /d:sonar.verbose=true
Note the verbose logging didn't give me any valuable insight.
(Also note that the documentation currently says to use SonarQube.Scanner.MSBuild.exe, but the verbose logger told me to switch to SonarScanner.MSBuild.exe)
SO...how we we report this issue to someone that can fix it? Their documentation says to go to Stackoverflow. So here we are.
I thought it may have been an issue with a project. So I created a new project with nothing other than the startup template Console Application. Same error.
In my case SonarQube 7.9.1 (deployed with Helm to Kubernetes cluster) was missing temp directory /opt/sonarqube/temp/tc/work/Tomcat/localhost/ROOT after Helm rollback. No idea what happened to it.
Logfile /opt/sonarqube/logs/web.log inside SonarQube pod had this error:
2021.02.02 06:57:03 WARN web[AXdZ6l6MParQCncJACv3][o.s.s.w.ServletRequest] Can't read file part for parameter report
java.io.IOException: The temporary upload location [/opt/sonarqube/temp/tc/work/Tomcat/localhost/ROOT] is not valid
The fix was to exec into pod and create the missing directory. Would like to know the reason though...
The issue is with the sonar service starting up.
First try to stop the SonarStart.bat by using Ctrl+c, and then try to open localhost:9000 ( or whichever port you configured sonar server).
If it is still opening then go to task manager and search for wrapper.exe service and stop the service. If no service is found then go to:
Task manager>Details> and stop all java.exe process.
Note: If you running many Java applications, right-click the java.exe and choose goto service, and stop only those java.exe that belongs to AppX deployment.services
Now start sonarstart.bat as administrator..
today i face the same error when using jenkins to scanner the code.
get the error when POST /api/ce/submit and get 400 code by add the sonar.verbose=true
i use the below step to check reason
first to restart the sonarqube => failed
check the report file size by using "du -sh" get 108m and DB server support 1G => failed
login the sonar-qube server and check the access.log, web.log and another log, finally find the error reason " Processing of multipart/form-data request failed. No space left on device", so i check the server by command "df -h", some devices are used 100% => so i remove some no-using file and fix it!!!
check if you have enough memory
ex: free -m
In my case I had to upgrade memory.
I am attempting to install Oracle HTTP server 12.2.1.1 on Windows Server 2012 R2 in standalone mode. I believe I followed the Oracle documentation correctly. I have progressed to this point: https://docs.oracle.com/middleware/1221/core/WTINS/GUID-3ED8EE64-EE8B-4EF3-84A1-19CEF21B8547.htm#WTINS414
My attempts to run "startComponent.cmd ohs1" have resulted in this error:
weblogic.nodemanager.NMException: Received error message from Node Manager Serve
r: [Server start command for OHS server 'ohs1' failed due to: [Failed t
o start the server ohs1
The error message also says to check a log file. Contents are:
<2016-06-29 15:42:10> <INFO> <OHS-4018> <Starting server ohs1>
<2016-06-29 15:42:10> <INFO> <OHS-0> <Running C:\Middleware\Oracle_Home_12\ohs\bin\launch.exe C:\Middleware\Oracle_Home_12\ohs\bin\httpd.exe -DOHS_MPM_WINNT -d C:/Middleware/Oracle_Home_12/user_projects/domains/base_domain/config/fmwconfig/components/OHS/instances/ohs1 -f C:\Middleware\Oracle_Home_12\user_projects\domains\base_domain\config\fmwconfig\components\OHS\instances\ohs1\httpd.conf>
<2016-06-29 15:42:11> <SEVERE> <OHS-0> <C:\Middleware\Oracle_Home_12\ohs\bin\launch.exe C:\Middleware\Oracle_Home_12\ohs\bin\httpd.exe -DOHS_MPM_WINNT -d C:/Middleware/Oracle_Home_12/user_projects/domains/base_domain/config/fmwconfig/components/OHS/instances/ohs1 -f C:\Middleware\Oracle_Home_12\user_projects\domains\base_domain\config\fmwconfig\components\OHS\instances\ohs1\httpd.conf: exit status = -1073741515>
<2016-06-29 15:42:11> <INFO> <OHS-4005> <Check the instance log file for more information: C:\Middleware\Oracle_Home_12\user_projects\domains\base_domain\servers\ohs1\logs\ohs1.log>
<2016-06-29 15:42:11> <SEVERE> <OHS-0> <Failed to start the server ohs1>
The log file referenced here, "C:\Middleware\Oracle_Home_12\user_projects\domains\base_domain\servers\ohs1\logs\ohs1.log", does not exist.
I also made sure that the required Microsoft redistributable was installed.
What am I doing wrong?
I received help from the Oracle Community:
Do you have lastinvocation.log file under
C:/Middleware/Oracle_Home_12/user_projects/domains\base_domain\servers\ohs1\logs?
If yes, rename it to lastinvocation.cmd and run this from command line and check if the ohs1.log file gets generated.
If yes, what is the error message seen?
The error message returned was:
"The program can't start because MSVCR110.dll is missing from your computer. Try reinstalling the program to fix this problem."
The user then pointed me to an Oracle Doc:
This is also described in the below article
Oracle HTTP Server 12.2.1 Fails To Start With Error 'MSVCR110.dll' Missing From Your Computer (Doc ID 2078713.1)
This Oracle article had a link to a DIFFERENT (larger) version of vcredist_x64.exe than I had used when installing the components. This version worked.
Thanks to Aishwarya in the Oracle community!