I'm using Lua in interactive mode on a Mac (thanks to rudix.org).
When I want to load a file I do:
dofile("/my/long/path/to/my/directory/file.lua")
I want to do a different thing, that is:
put all my files in a desktop directory myDirectory;
then call the file from the terminal this way dofile("file.lua");
Is this possible? How?
If the path is fixed, you can just redefine dofile:
local _dofile=dofile
local path=("/my/long/path/to/my/directory/")
function dofile(x)
return _dofile(path..x)
end
You may put this (and other initializations) in a file and set the environment variable LUA_INIT to its location. After this, every invocation of lua will see the version of dofile redefined above and the users will be able to say simply dofile("foo.lua").
Alternatively, you can use require, which looks for modules in a list of paths in package.path or LUA_PATH.
Related
I'm trying to use Atom to run a Lua script. However, when I try to load files via the require() command, it always says it's unable to locate them. The files are all in the same folder. For example, to load utils.lua I have tried
require 'utils'
require 'utils.lua'
require 'D:\Users\Mike\Dropbox\Lua Modeling\utils.lua'
require 'D:\\Users\\Mike\\Dropbox\\Lua Modeling\\utils.lua'
require 'D:/Users/Mike/Dropbox/Lua Modeling/utils.lua'
I get errors like
Lua: D:\Users\Mike\Dropbox\Lua Modeling\main.lua:12: module 'D:\Users\Mike\Dropbox\Lua Modeling\utils.lua' not found:
no field package.preload['D:\Users\Mike\Dropbox\Lua Modeling\utils.lua']
no file '.\D:\Users\Mike\Dropbox\Lua Modeling\utils\lua.lua'
no file 'D:\Program Files (x86)\Lua\5.1\lua\D:\Users\Mike\Dropbox\Lua Modeling\utils\lua.lua'
no file 'D:\Program Files (x86)\Lua\5.1\lua\D:\Users\Mike\Dropbox\Lua Modeling\utils\lua\init.lua'
no file 'D:\Program Files (x86)\Lua\5.1\D:\Users\Mike\Dropbox\Lua Modeling\utils\lua.lua'
The messages says on the first line that 'D:\Users\Mike\Dropbox\Lua Modeling\utils.lua' was not found, even though that is the full path of the file. What am I doing wrong?
Thanks.
The short answer
You should be able to load utils.lua by using the following code:
require("utils")
And by starting your program from the directory that utils.lua is in:
cd "D:\Users\Mike\Dropbox\Lua Modeling"
lua main.lua
The long answer
To understand what is going wrong here, it is helpful to know a little bit about how require works. The first thing that require does is to search for the module in the module path. From Programming in Lua chapter 8.1:
The path used by require is a little different from typical paths. Most programs use paths as a list of directories wherein to search for a given file. However, ANSI C (the abstract platform where Lua runs) does not have the concept of directories. Therefore, the path used by require is a list of patterns, each of them specifying an alternative way to transform a virtual file name (the argument to require) into a real file name. More specifically, each component in the path is a file name containing optional interrogation marks. For each component, require replaces each ? by the virtual file name and checks whether there is a file with that name; if not, it goes to the next component. The components in a path are separated by semicolons (a character seldom used for file names in most operating systems). For instance, if the path is
?;?.lua;c:\windows\?;/usr/local/lua/?/?.lua
then the call require"lili" will try to open the following files:
lili
lili.lua
c:\windows\lili
/usr/local/lua/lili/lili.lua
Judging from your error message, your Lua path seems to be the following:
.\?.lua;D:\Program Files (x86)\Lua\5.1\lua\?.lua;D:\Program Files (x86)\Lua\5.1\lua\?\init.lua;D:\Program Files (x86)\Lua\5.1\?.lua
To make that easier to read, here are each the patterns separated by line breaks:
.\?.lua
D:\Program Files (x86)\Lua\5.1\lua\?.lua
D:\Program Files (x86)\Lua\5.1\lua\?\init.lua
D:\Program Files (x86)\Lua\5.1\?.lua
From this list you can see that when calling require
Lua fills in the .lua extension for you
Lua fills in the rest of the file path for you
In other words, you should just specify the module name, like this:
require("utils")
Now, Lua also needs to know where the utils.lua file is. The easiest way is to run your program from the D:\Users\Mike\Dropbox\Lua Modeling folder. This means that when you run require("utils"), Lua will expand the first pattern .\?.lua into .\utils.lua, and when it checks that path it will find the utils.lua file in the current directory.
In other words, running your program like this should work:
cd "D:\Users\Mike\Dropbox\Lua Modeling"
lua main.lua
An alternative
If you can't (or don't want to) change your working directory to run the program, you can use the LUA_PATH environment variable to add new patterns to the path that require uses to search for modules.
set LUA_PATH=D:\Users\Mike\Dropbox\Lua Modeling\?.lua;%LUA_PATH%;
lua "D:\Users\Mike\Dropbox\Lua Modeling\main.lua"
There is a slight trick to this. If the LUA_PATH environment variable already exists, then this will add your project's folder to the start of it. If LUA_PATH doesn't exist, this will add ;; to the end, which Lua fills in with the default path.
Oracle's sqlldr defaults to a .dat extension. That I want to override. I don't like to rename the file. When googled get to know few answers to use . like data='fileName.' which is not working. Share your ideas, please.
Error message is fileName.dat is not found.
Sqlloder has default extension for all input files data,log,control...
data= .dat
log= .log
control = .ctl
bad =.bad
PARFILE = .par
But you have to pass filename without apostrophe and dot
sqlloder pass/user#db control=control data=data
sqloader will add extension. control.ctl data.dat
Nevertheless i do not understand why you do not want to specify extension?
You can't, at least in Unix/Linux environments. In Windows you can use the trailing period trick, specifying either INFILE 'filename.' in the control file or DATA=filename. on the command line. WIndows file name handling allows that; you can for instance do DIR filename. at a command prompt and it will list the file with no extension (as will DIR filename). But you can't do that with *nix, from a shell prompt or anywhere else.
You said you don't want to copy or rename the file. Temporarily renaming it might be the simplest solution, but as you may have a reason not to do that even briefly you could instead create a hard or soft link to the file which does have an extension, and use that link as the target instead. You could wrap that in a shell script that takes the file name argument:
# set variable from correct positional parameter; if you pass in the control
# file name or other options, this might not be $1 so adjust as needed
# if the tmeproary file won't be int he same directory, need to be full path
filename=$1
# optionally check file exists, is readable, etc. but overkill for demo
# can also check temporary file does not already exist - stop or remove
# create soft link somewhere it won't impact any other processes
ln -s ${filename} /tmp/${filename##*/}.dat
# run SQL*Loader with soft link as target
sqlldr user/password#db control=file.ctl data=/tmp/${filename##*/}.dat
# clean up
rm -f /tmp/${filename##*/}.dat
You can then call that as:
./scriptfile.sh /path/to/filename
If you can create the link in the same directory then you only need to pass the file, but if it's somewhere else - which may be necessary depending on why renaming isn't an option, and desirable either way - then you need to pass the full path of the data file so the link works. (If the temporary file will be int he same filesystem you could use a hard link, and you wouldn't have to pass the full path then either, but it's still cleaner to do so).
As you haven't shown your current command line options you may have to adjust that to take into account anything else you currently specify there rather than in the control file, particularly which positional argument is actually the data file path.
I have the same issue. I get a monthly download of reference data used in medical application and the 485 downloaded files don't have file extensions (#2gb). Unless I can load without file extensions I have to copy the files with .dat and load from there.
Is it possible to tell ASDF that it should produce only one fas(l) file for entire system? This file should be concatenation (in right order) of all compiled files of the system, including all files of systems on which target system depends.
Yes, with compile-bundle-op (ASDF 3.1): http://common-lisp.net/project/asdf/asdf/Predefined-operations-of-ASDF.html
edit: Actually, monolithic-compile-bundle-op seemes to be asked for (as shown in other answers).
If you have to predict the extension, use uiop:compile-file-type.
And/or you can just call (asdf:output-files 'asdf:monolithic-compile-bundle-op :my-system) to figure out what is actually used.
Option monolithic-compile-bundle-op will create single compiled file which includes all dependencies, while compile-bundle-op creates a file for every system.
Example of use:
(asdf:operate 'asdf:monolithic-compile-bundle-op :my-system)
This command will create file my-system--all-systems.fas(l) in output directory of target project, as well as "bundle" files for every system, named like my-system--system.fas(l).
I have created a project in /Projects/test that have the following files:
/Projects/test/first.rb
/Projects/test/second.rb
In first.rb, I do:
load 'second.rb'
And it gets loaded correctly. However, if I open the console and I type $:, I don't see the current directory "." in the load path. How does Ruby know where to load that 'second.rb' from?
See the documentation of Kernel#load clearly :
Loads and executes the Ruby program in the file filename. If the filename does not resolve to an absolute path, the file is searched for in the library directories listed in $:. If the optional wrap parameter is true, the loaded script will be executed under an anonymous module, protecting the calling program’s global namespace. In no circumstance will any local variables in the loaded file be propagated to the loading environment.
In case load 'second.rb' - second.rb has been internally resolved to the absolute path /Projects/test/second.rb,as your requiring file in the directory is same as required file directory. Nothing has been searched to the directories listed in$: for your case.
Just remember another way always
- The load method looks first in the current directory for files
Contrary to the currently accepted answer, the argument 'second.rb' does not resolve to an absolute path. If that were what was meant, you would also be able to require 'second.rb', since require has exactly the same wording about absolute paths.
I think what's happening here is just that the phrasing in the documentation for load is not clear at all about what the actual steps are. When it says "Loads and executes the Ruby program in the file filename," it means that literally — it treats the argument as a file name and attempts to load it as a Ruby program. If isn't an absolute path†, then Ruby goes through $LOAD_PATH and looks for it in those places. If that doesn't turn anything up, then it just goes ahead and tries to open it just as you passed it in. That's the logic that MRI actually follows.
† The actual check that Ruby does is essentially "Does the path start with '/', '~' or './'?".
So currently I have included the following in my .bashrc file.
export RUBYLIB=/home/git/project/app/helpers
I am trying to run rspec with a spec that has
require 'output_helper'
This file is in the helpers directory. My question is that when I change the export line to:
export RUBYLIB=/home/git/project/
It no longer finds the helper file. I thought that ruby should search the entire path I supply, and not just the outermost directory supplied? Is this the correct way to think about it? And if not, how can I make it so RUBY will search through all subdirectories and their subdirectories, etc?
Thanks,
Robin
Similar to PATH, you need to explicitly name the directory under which to look for libraries. However, this will not include any child directories within, so you will need to list any child sub-directories as well, delimiting them with a colon.
For example:
export RUBYLIB=/home/git/project:/home/git/project/app/helpers
As buruzaemon mentions, Ruby does not search subdirectories, so you need to include all the directories you want in your search path. However, what you probably want to do is:
require 'app/helpers/output_helper'
This way you aren't depending on the RUBYLIB environment variable being set a certain way. When you're deploying code to production, or collaborating with others, these little dependencies can make for annoying debugging sessions.
Also as a side note, you can specify . as a search path, rather than using machine-specific absolute paths.