I am simply hitting 10 URLs for 300 Virtual users but in Jmeter Summery report listener I see the only few URLs has 300 samples , for other URLs number of sample is getting down, like 250,197 and 150.
Could someone explain me why it happens?
Thanks in Advance.
Rupesh
There could be various reasons for it.
If You are using scheduler in ThreadGroup that finishes before all requests have processed, then the number of samples for initial requests could be higher
If some of requests are dependent on success of other requests then it could also result in different no of samples for different requests
You can use Tree view listener to check details of your requests. Also try to identify which kind of requests have more samples. If you can find any pattern in it then that might help you narrow down the issue.
Related
In Jmeter I have a scenario like
Load tested with 4000 users and 1 hour duration
759965 requests made and out of which one request failed on an average 18894.13 requests made per second.
This was the earlier scenario and I want to make the same scenario again with the above information. Can someone guide me how to set up the environment and also the results. I have designed my script using Co-relation with the help regular expression extractor.enter image description here
For the normal Thread Group the configuration would be something like:
It would also be a good idea to use some ramp-up period so the load would increase gradually and you could correlate increasing load with other metrics like response time or transactions per second.
You might also want to use one of Custom Thread Groups which can be installed as JMeter Plugins, they provide easy visual way to define the number of threads, test duration, ramp-up, ramp-down, time to hold the load, eventual spikes, etc.
Once you define your desired workload you should run your test in command-line non-GUI mode, with regards to the test results the easiest option is to generate HTML Reporting Dashboard
I have 250 users ,and around 60000 sample counts should be hit including all the requests. Whichever request is supposed to get huge sample count,I have put those request within loop count,But the requests outside the loop are getting executed only 3-4 times which is less than expected. How do I handle this?
It is not very possible to provide the comprehensive answer without knowing what you're trying to achieve and seeing your test or at least Thread Group configuration
The easiest option is moving the requests which you want to execute more times into a separate Thread Group
If the requests have to stay in one Thread Group you can control the frequency using Throughput Controller
If the logic is more complex - consider using Switch Controller or Weighted Switch Controller
I'm trying to test my https endpoint with JMeter. I want to make at least 10000 requests per second, but when I set the number of threads to 10000 I get way less rps, around 500.
I've tried setting the number of threads to 1000 and 100, surprisingly I get this same number of rps. I'm using HTTP Sampler and "use Keep-Alive" is set to true. When I look in the statistics I see that when using 100 threads, it makes use of Keep-Alive and connect_time is around 100 ms, but when the number of threads is higher connect_time grows, it's like it stops reusing the connections.
I know this isn't a server issue, because I've tried testing that same endpoint with Yandex.Tank and phantom and it can easily maintain 10 000 requests per second, the problem is it can't use response data to make furhter requests, that's why I have to use JMeter for this task.
This can be done by using "Stepping thread group". It will allow you to send 10000 request per second upto specified time. Refer below image.
Stepping Thread Group
Download jar from below link.
https://jmeter-plugins.org/wiki/SteppingThreadGroup/
I hope you are trying to achieve this using one machine. Try with multiple machine or jmeter distributed mode.
https://jmeter.apache.org/usermanual/jmeter_distributed_testing_step_by_step.pdf
https://www.blazemeter.com/blog/how-to-perform-distributed-testing-in-jmeter/
https://blazemeter.com/blog/3-common-issues-when-running-jmeter-scripts-and-how-solve-them/
I am assuming that it is the issue with machine which is not able to generate that much load. Usually, i have use max 300 threads per machine but it depend on the machine config. Just check if the machine is having issue and multiple machine is able to generate more load, considering server is not having any issue.
Hope this helps.
Update:-Usually 200-500 can be handled my modern machines.
Please check the below link to have some more info:-
1.How do threads and number of iterations impact test and what is JMeter’s max. thread limit
2.https://www.blazemeter.com/blog/what%e2%80%99s-the-max-number-of-users-you-can-test-on-jmeter/ .
We are creating a new hosted server for one of our APIs on managed containers (Kubernetes) and we're trying to validate that it can handle at least the same amount of traffic load requests.
We've started with one of the APIs, where we would need to handle at least 140k requests per minute, all endpoints combined.
To verify this, I created a simple JMeter test as follows:
-Test Plan
---Thread Group Endpoint1
-----HTTP Request -> a GET request with query params for /path1
---Thread Group Endpoint2
-----HTTP Request -> a GET request with query params for /path2
For a local test, I used the following setup:
Thread Groups Endpoint1 and Endpoint2 are set to 200 threads (users), ramp-up period of 1s, loop count = forever and duration 60s.
Using a Summary Report listener when running the test gets me a total of ~9300 # Samples.
Using this approach, is it safe to just increase the number of threads (users) for the Thread Groups until I reach the desired 140k requests per minute?
Note: I only used JMeter a little before, so I'm aware that the entire approach may be wrong, therefore any suggestions and steering to the right path are more than welcomed.
Your approach is viable as long as it represents real-life application usage. If it has 2 endpoints with equally/evenly distributed load - your setup is just fine. If there are more endpoints and some of them are used more than the others - consider defining the workload correspondingly either using different Thread Groups or other distribution mechanism such as Throughput Controller
Increasing the number of threads is also fine, however consider increasing the load gradually, to wit increase ramp-up time so your test could have:
Arrivals phase
Time to hold the load
Ramp-down phase
This way you will be able to correlate various metrics like increasing response time, throughput, number of errors, etc. with the increasing load. Also you will be able to state what was the number of threads/requests per second when the system reached saturation point/breaking point and does it recover when the load gets back.
Also make sure you're following JMeter Best Practices as 2300/2500 requests per second is not something JMeter can support out of the box and you will need to do some tuning, at least increase JVM Heap size allocated to JMeter.
You may not be able to achieve the desired 140k requests per minute using a single Jmeter Machine, in that case you'll need Distributed Load Testing approach here.
refer: http://jmeter.apache.org/usermanual/jmeter_distributed_testing_step_by_step.html
Also keeping the ramp-up period of 1 second will lead to spike and unrealistic load in the system which will not give proper result unless you've pre-warmed your server, you should gradually increase the load as per real/estimated traffic pattern.
I have been looking on the site and I don't see anything related to this topic, so I decided to ask.
Basically, I would like to know if there is a way to extract the error rate per page using a period of time. The reason is because we run a test in different stages, with different levels of throughput. Therefore, I am interested in obtain the degradation on page health. I already got the hits and response times. However, the error rate I don't see a way to get it.
If someone knows a way, please share!
Thank you in advance guys!
You can use the jp#gc - Hits per Second - listener. Just click on Errors check box to show only the failed requests which is the Error rate you are looking for!
For page level Error rate, you can jp#gc - Transactions per Second
You have the following options:
Response Codes Per Second chart available via HTML Reporting Dashboard
Response Codes Per Second chart available via JMeter Plugins
Use 3-rd party analysis solution like BM.Sense