OS: Ubuntu 14.04
I am trying to install RVM as multi user from a shell script, I have the following in the shell script:
gpg --keyserver hkp://keys.gnupg.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3
sudo curl -L https://get.rvm.io | bash -s stable
When I run the script, I get the following:
Installing RVM to /home/ubuntu/.rvm/
When I'm expexting to see:
Installing RVM to /usr/local/rvm
The advice on stackoverflow is to install it as sudo, but this is not working. Any ideas?
You have sudo on the wrong half of the command.
You need it on the bash half not the curl half.
You want a sudo-ed shell not a sudo-ed download.
curl -L https://get.rvm.io | sudo bash -s stable
Related
I'm trying to install Homebrew using a Makefile, the contents of the Makefile is this:
.PHONY: install
install:
# Install homebrew
/usr/bin/ruby -e $(shell curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)
However this just prints the entire contents of the script, but it does not execute anything. I got as far as googling for this issue and seeing that the characters $, (, ) have a special meaning in a Makefile, however I could not find any solution.
try just piping output from curl to ruby like this:
.PHONY: install
install:
# Install homebrew
curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install | ruby
If you encounter the following warning:
Warning: The Ruby Homebrew install is now deprecated and has been rewritten in Bash.
Please migrate to the following command:
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"
You can modify #igagis answer as such
.PHONY:install
install:
curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh | bash
I was running into needing sudo, then sudo telling me not to run as root so the command i used was:
sudo true
curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh | sudo -u $$USER bash
Notes:
I use sudo true to run sudo and do nothing. that way the user can input their password. running sudo make from the terminal caused the $USER to be root. if you remove the sudo true line, then if sudo has not been run yet, the sudo access check will fail and not let you insert a password when running the curl line
the two $ makes the makefile write a literal $
I am attempting to install RVM and a few gems from a single bash script that I use to bootstrap a new development box. My goal is to have a single script I can run on a clean install of OSX to install any and everything I use for development.
After installing RVM, I am sourcing the $HOME/.rvm/scripts/rvm script, however in the next line, when I attempt to install a specific version of ruby, it says rvm is not found. Here is my script.
gpg --keyserver hkp://keys.gnupg.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3
curl -sSL https://get.rvm.io | bash -s stable --autolibs=homebrew
source "$HOME/.rvm/scripts/rvm"
rvm install 2.1.1
rvm use 2.1.1
gem install jekyll
gem install tmuxinator
gem install scss-lint
I can't understand why this isn't working, because if I run each command individually in the terminal, everything works great.
Any ideas on a 1 script solution to install RVM, a specific version of Ruby, and a few gems?
If you look in .bashrc after RVM they have:
export PATH="$PATH:$HOME/.rvm/bin" # Add RVM to PATH for scripting
What I would do overall for cleanliness
gpg --keyserver hkp://keys.gnupg.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3
curl -sSL https://get.rvm.io | bash -s stable --autolibs=homebrew
if [[ -s "$HOME/.rvm/scripts/rvm" ]]; then
. "$HOME/.rvm/scripts/rvm"
else
echo "$HOME/.rvm/scripts/rvm" could not be found.
exit 1
fi
export PATH="$PATH:$HOME/.rvm/bin"
rvm use 2.1.1 --default --install
for i in jekyll tmuxinator scss-lint; do gem install $i; done
You may need to add "source ~/.rvm/scripts/rvm" to your ~/.bash_profile file.
echo "source $HOME/.rvm/scripts/rvm" >> ~/.bashrc
To install rvm:
rm -rf ~/.rvm
curl -L https://get.rvm.io | bash -s stable
In your script type:
type_rvm=$(type rvm | head -n 1)
echo "type rmv: $type_rvm"
You could try export rvm:
export PATH=$PATH:/opt/rvm/bin:/opt/rvm/sbin
I found a solution after reading through another stack overflow post.
A comment to one of the answers suggested makeing sure the script runs with bash and not sh. That was my problem. After changing the top line of my script (which wasn't included in my example) from #!/bin/sh to #!/usr/bin/env bash, everything worked as expected.
After I installed rvm using the following command in my Fedora 12 system:
\curl -L https://get.rvm.io | bash -s stable –ruby
When I want to use rvm, it says
rvm: command not found
I want to use rvm for: rvm install 1.9.3
What is the solution.
Your command uses an en-dash ('–', U+2013):
\curl -L https://get.rvm.io | bash -s stable –ruby
but the installation instructions at https://rvm.io/rvm/install/ use a double ASCII dash, '--':
\curl -L https://get.rvm.io | bash -s stable --ruby
Really, I don't know what happened. Excuse me if this question is so NOOB, but I can't find the solution for this problem.
-bash: rvm: command not found
I tried this
curl -L https://get.rvm.io | bash -s -- --version latest
but still nothing I need to see the ruby version for use the simplecov because it not works with older version from 1.9
It might because the terminal not having rvm shell configuration loaded.
Try following from your terminal:
$ source ~/.rvm/scripts/rvm
then
$ type rvm | head -n 1
If the output is:
rvm is a function
You may need to add "source ~/.rvm/scripts/rvm" to your ~/.bash_profile file
you need to read all the texts that are displayed when you install RVM:
rm -rf ~/.rvm
curl -L https://get.rvm.io | bash -s stable
after you run sudo curl -L https://get.rvm.io | bash -s stable --ruby
you need to close the terminal ,then open again!
This worked for me:
rm -rf ~/.rvm
curl -L https://get.rvm.io | bash -s stable
source /etc/profile worked for me.
For a long-term solution, you should add this to your ~/.profile file:
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"
to simply load rvm into a single terminal, use
source "$HOME/.rvm/scripts/rvm"
supposedly this call is more cross-platform:
. "$HOME/.rvm/scripts/rvm"
As suggested by #mpapis, Do this first
$ rm -rf ~/.rvm
$ curl -L https://get.rvm.io | bash -s stable
Then, as suggested by #peterpengnz, do this and you should be fine with RVM cmd issues
$ source ~/.rvm/scripts/rvm
Close and restart terminal after installing RVM — gets me EVERY TIME.
To start using RVM, you'll need to enter source /Users/yourusername/.rvm/scripts/rvm into your terminal (of course, insert your real username in place of yourusername).
Close and reopen your terminal. Sometimes, the changes made during the installation of rvm are not immediately picked up by your terminal, so reopening it should resolve the problem.
I followed the instructions from the RVM homepage (https://rvm.beginrescueend.com/rvm/install/)
I typed the following:
sudo bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer )
the script executed and didn't seem to give any errors.
the same without sudo gave an error:
Warning: Failed to create the file
Warning: /usr/share/ruby-rvm/archives/wayneeseguin-rvm-stable.tgz: Permission
Warning: denied
0 792k 0 3908 0 0 2257 0 0:05:59 0:00:01 0:05:58 2257
curl: (23) Failed writing body (0 != 3908)
Could not download 'https://github.com/wayneeseguin/rvm/tarball/stable'.
curl returned status '23'.
I also put this in my ~/.bashrc
echo '[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm"
what I get is:
~$ type rvm | head -1
bash: type: rvm: not found
~$ source "/usr/local/rvm/scripts/rvm"
bash: /usr/local/rvm/scripts/rvm: No such file or directory
~$ source "$HOME/.rvm/scripts/rvm"
bash: /home/anonym/.rvm/scripts/rvm: No such file or directory
How can this be fixed?
PS
I'm using Ubuntu 11.10
Sudo problems. This worked for me to install rvm. Just do:
curl -L https://get.rvm.io | sudo bash -s stable --ruby
nano ~/.bashrc
at the bottom of the file add these line
unset rvm_path
unset GEM_HOME
Then run
curl -L https://get.rvm.io | bash -s stable
source ~/.rvm/scripts/rvm
echo "source ~/.rvm/scripts/rvm" >> ~/.bashrc
rvm install 2.1.3
rvm use 2.1.3 --default
ruby -v
Can you try this:
$ curl -s raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer | bash -s stable
or
$ curl -s raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer | sudo bash -s stable
depending on your permissions. That should help. It helped me! :)
I'm sure there's a more elegant way to fix this, but I ran into the same issue and was kinda in a hurry, so I went for a quick and dirty workaround:
$ curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer > foo.sh
$ chmod 755 foo.sh
Then edit line 162, and add -k to the curl command:
$ vim foo.sh
162 if curl -Lk https://github.com/${_repo}/rvm/tarball/${_branch} -o ${rvm_archives_path}/${_repo}-rvm-${_branch}.tgz
Then run the script:
$ ./foo.sh --branch stable
Like I said, not ideal, but it got me where I needed to be quickly.
If anyone has this problem in the future in ubuntu I was getting this error because of an old package that still had config stuff hanging around.
Try running
sudo apt-get --purge remove ruby-rvm
That should take care of the permission error and let you install RVM as a normal user under $HOME/.rvm
Put this in your .bashrc instead (without echo)
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"
And restart your terminal.
You might have RVM installed under the wrong user. RVM won't let you install if it's installed under another user.
You can uninstall it from the other user with rvm implode.
Log over to the other user and RVM will install correctly!
https://rvm.io/rvm/security#ipv6-issues
You can forbid gpg's internal dirmngr from using IPv6 by add the following line to ~/.gnupg/dirmngr.conf: