I'm trying to get my commit-build.bat to execute other .BAT files as part of our build process.
Content of commit-build.bat:
"msbuild.bat"
"unit-tests.bat"
"deploy.bat"
This seems simple enough, but commit-build.bat only executes the first item in the list (msbuild.bat).
I have run each of the files separately with no problems.
Use:
call msbuild.bat
call unit-tests.bat
call deploy.bat
When not using CALL, the current batch file stops and the called batch file starts executing. It's a peculiar behavior dating back to the early MS-DOS days.
All the other answers are correct: use call. For example:
call "msbuild.bat"
History
In ancient DOS versions it was not possible to recursively execute batch files. Then the call command was introduced that called another cmd shell to execute the batch file and returned execution back to the calling cmd shell when finished.
Obviously in later versions no other cmd shell was necessary anymore.
In the early days many batch files depended on the fact that calling a batch file would not return to the calling batch file. Changing that behaviour without additional syntax would have broken many systems like batch menu systems (using batch files for menu structures).
As in many cases with Microsoft, backward compatibility therefore is the reason for this behaviour.
Tips
If your batch files have spaces in their names, use quotes around the name:
call "unit tests.bat"
By the way: if you do not have all the names of the batch files, you could also use for to do this (it does not guarantee the correct order of batch file calls; it follows the order of the file system):
FOR %x IN (*.bat) DO call "%x"
You can also react on errorlevels after a call. Use:
exit /B 1 # Or any other integer value in 0..255
to give back an errorlevel. 0 denotes correct execution. In the calling batch file you can react using
if errorlevel neq 0 <batch command>
Use if errorlevel 1 if you have an older Windows than NT4/2000/XP to catch all errorlevels 1 and greater.
To control the flow of a batch file, there is goto :-(
if errorlevel 2 goto label2
if errorlevel 1 goto label1
...
:label1
...
:label2
...
As others pointed out: have a look at build systems to replace batch files.
If we want to open multiple command prompts then we could use
start cmd /k
/k: is compulsory which will execute.
Launching many command prompts can be done as below.
start cmd /k Call rc_hub.bat 4444
start cmd /k Call rc_grid1.bat 5555
start cmd /k Call rc_grid1.bat 6666
start cmd /k Call rc_grid1.bat 5570.
Try:
call msbuild.bat
call unit-tests.bat
call deploy.bat
You are calling multiple batches in an effort to compile a program.
I take for granted that if an error occurs:
1) The program within the batch will exit with an errorlevel;
2) You want to know about it.
for %%b in ("msbuild.bat" "unit-tests.bat" "deploy.bat") do call %%b|| exit /b 1
'||' tests for an errorlevel higher than 0. This way all batches are called in order but will stop at any error, leaving the screen as it is for you to see any error message.
If we have two batch scripts, aaa.bat and bbb.bat, and call like below
call aaa.bat
call bbb.bat
When executing the script, it will call aaa.bat first, wait for the thread of aaa.bat terminate, and call bbb.bat.
But if you don't want to wait for aaa.bat to terminate to call bbb.bat, try to use the START command:
START ["title"] [/D path] [/I] [/MIN] [/MAX] [/SEPARATE | /SHARED]
[/LOW | /NORMAL | /HIGH | /REALTIME | /ABOVENORMAL | /BELOWNORMAL]
[/AFFINITY <hex affinity>] [/WAIT] [/B] [command/program]
[parameters]
Exam:
start /b aaa.bat
start /b bbb.bat
call msbuild.bat
call unit-tests.bat
call deploy.bat
using "&"
As you have noticed executing the bat directly without CALL,START, CMD /C causes to enter and execute the first file and then the process to stop as the first file is finished. Though you still can use & which will be the same as using command1 & command2 directly in the console:
(
first.bat
)&(
second.bat
)& (
third.bat
)&(
echo other commands
)
In a term of machine resources this will be the most efficient way though in the last block you won't be able to use command line GOTO,SHIFT,SETLOCAL.. and its capabilities will almost the same as in executing commands in the command prompt. And you won't be able to execute other command after the last closing bracket
Using CALL
call first.bat
call second.bat
call third.bat
In most of the cases it will be best approach - it does not create a separate process but has almost identical behaviour as calling a :label as subroutine. In MS terminology it creates a new "batch file context and pass control to the statement after the specified label. The first time the end of the batch file is encountered (that is, after jumping to the label), control returns to the statement after the call statement."
You can use variables set in the called files (if they are not set in a SETLOCAL block), you can access directly labels in the called file.
CMD /C, Pipes ,FOR /F
Other native option is to use CMD /C (the /C switch will force the called console to exit and return the control)
Something that cmd.exe is doing in non transparent way with using FOR /F against bat file or when pipes are used.
This will spawn a child process that will have all the environment ot the calling bat.
Less efficient in terms of resources but as the process is separate ,parsing crashes or calling an EXIT command will not stop the calling .bat
#echo off
CMD /c first.bat
CMD /C second.bat
::not so different than the above lines.
:: MORE,FINDSTR,FIND command will be able to read the piped data
:: passed from the left side
break|third.bat
START
Allows you more flexibility as the capability to start the scripts in separate window , to not wait them to finish, setting a title and so on. By default it starts the .bat and .cmd scripts with CMD /K which means that the spawned scripts will not close automatically.Again passes all the environment to the started scripts and consumes more resources than cmd /c:
:: will be executed in the same console window and will wait to finish
start "" /b /w cmd /c first.bat
::will start in a separate console window and WONT wait to be finished
:: the second console window wont close automatically so second.bat might need explicit exit command
start "" second.bat
::Will start it in a separate window ,but will wait to finish
:: closing the second window will cause Y/N prompt
:: in the original window
start "" /w third.cmd
::will start it in the same console window
:: but wont wait to finish. May lead to a little bit confusing output
start "" /b cmd /c fourth.bat
WMIC
Unlike the other methods from now on the examples will use external of the CMD.exe utilities (still available on Windows by default).
WMIC utility will create completely separate process so you wont be able directly to wait to finish. Though the best feature of WMIC is that it returns the id of the spawned process:
:: will create a separate process with cmd.exe /c
WMIC process call create "%cd%\first.bat","%cd%"
::you can get the PID and monitoring it with other tools
for /f "tokens=2 delims=;= " %%# in ('WMIC process call create "%cd%\second.bat"^,"%cd%" ^|find "ProcessId"') do (
set "PID=%%#"
)
echo %PID%
You can also use it to start a process on a remote machine , with different user and so on.
SCHTASKS
Using SCHTASKS provides some features as (obvious) scheduling , running as another user (even the system user) , remote machine start and so on. Again starts it in completely separate environment (i.e. its own variables) and even a hidden process, xml file with command parameters and so on :
SCHTASKS /create /tn BatRunner /tr "%cd%\first.bat" /sc ONCE /sd 01/01/1910 /st 00:00
SCHTASKS /Run /TN BatRunner
SCHTASKS /Delete /TN BatRunner /F
Here the PID also can acquired from the event log.
ScriptRunner
Offers some timeout between started scripts. Basic transaction capabilities (i.e. rollback on error) and the parameters can be put in a separate XML file.
::if the script is not finished after 15 seconds (i.e. ends with pause) it will be killed
ScriptRunner.exe -appvscript %cd%\first.bat -appvscriptrunnerparameters -wait -timeout=15
::will wait or the first called script before to start the second
:: if any of the scripts exit with errorcode different than 0 will try
:: try to restore the system in the original state
ScriptRunner.exe -appvscript second.cmd arg1 arg2 -appvscriptrunnerparameters -wait -rollbackonerror -appvscript third.bat -appvscriptrunnerparameters -wait -timeout=30 -rollbackonerror
To call a .bat file within a .bat file, use
call foo.bat
(Yes, this is silly, it would make more sense if you could call it with foo.bat, like you could from the command prompt, but the correct way is to use call.)
Simplest Way To Run Multiple Batch Files Parallelly
start "systemLogCollector" /min cmd /k call systemLogCollector.bat
start "uiLogCollector" /min cmd /k call uiLogCollector.bat
start "appLogCollector" /min cmd /k call appLogCollector.bat
Here three batch files are run on separate command windows in a minimized state. If you don't want them minimized, then remove /min. Also, if you don't need to control them later, then you can get rid of the titles. So, a bare-bone command will be- start cmd /k call systemLogCollector.bat
If you want to terminate them, then run these commands-
taskkill /FI "WindowTitle eq appLogCollector*" /T /F
taskkill /FI "WindowTitle eq uiLogCollector*" /T /F
taskkill /FI "WindowTitle eq systemLogCollector*" /T /F
Start msbuild.bat
Start unit-tests.bat
Start deploy.bat
If that doesn't work, replace start with call or try this:
Start msbuild.bat
Goto :1
:1
Start unit-tests.bat
Goto :2
:2
Start deploy.bat
Looking at your filenames, have you considered using a build tool like NAnt or Ant (the Java version). You'll get a lot more control than with bat files.
If you want to open many batch files at once you can use the call command. However, the call command closes the current bat file and goes to another. If you want to open many at once, you may want to try this:
#echo off
start cmd "call ex1.bat&ex2.bat&ex3.bat"
And so on or repeat start cmd "call..." for however many files. This works for Windows 7, but I am not sure about other systems.
Your script should be:
start "msbuild.bat"
start "unit-tests.bat"
start "deploy.bat"
Just use the call command! Here is an example:
call msbuild.bat
call unit-tests.bat
call deploy.bat
With correct quoting (this can be tricky sometimes):
start "" /D "C:\Program Files\ProgramToLaunch" "cmd.exe" "/c call ""C:\Program Files\ProgramToLaunch\programname.bat"""
1st arg - Title (empty in this case)
2nd arg - /D specifies starting directory, can be ommited if want the current working dir (such as "%~dp0")
3rd arg - command to launch, "cmd.exe"
4th arg - arguments to command, with doubled up quotes for the arguments inside it (this is how you escape quotes within quotes in batch)
Running multiple scripts in one I had the same issue. I kept having it die on the first one not realizing that it was exiting on the first script.
:: OneScriptToRunThemAll.bat
CALL ScriptA.bat
CALL ScriptB.bat
EXIT
:: ScriptA.bat
Do Foo
EXIT
::ScriptB.bat
Do bar
EXIT
I removed all 11 of my scripts EXIT lines and tried again and all 11 ran in order one at a time in the same command window.
:: OneScriptToRunThemAll.bat
CALL ScriptA.bat
CALL ScriptB.bat
EXIT
::ScriptA.bat
Do Foo
::ScriptB.bat
Do bar
I know I am a bit late to the party, but here is another way. That is, this method should wait until the first one is done, the second, and so on.
start "" /wait cmd.exe /c msbuild.bat
start "" /wait cmd.exe /c unit-tests.bat
start "" /wait cmd.exe /c deploy.bat
The only issue that may come out of using this method, is that with new instances of cmd.exe being spawned, is that Errorlevel checking is kept within in each instance of cmd.exe.
Or..
start "" /wait call msbuild.bat
start "" /wait call unit-tests.bat
start "" /wait call deploy.bat
Hope this helps.
I need to create a batch-file (.bat) which keeps the console window open even after the started program has terminated (for the purpose of examining the console window output). For that I tried to use the "/WAIT" switch:
#ECHO OFF
title test
#ECHO ON
start "" /WAIT "C:\My CLI Tools\7zip\x64\7za.exe"
But despite using the "/WAIT" switch the console window automatically closes after 7za.exe is terminated. (Obviously, the "/WAIT" switch waits only until the started program has been terminated).
So how can I make the console window stay open even after 7za.exe has been terminated?
start /wait tells batch to wait for the program to terminate, before performing next line, or to finish script. to keep it open and do nothing you can use pause:
#ECHO OFF
title test
#ECHO ON
"C:\My CLI Tools\7zip\x64\7za.exe"
pause
Or timeout:
#ECHO OFF
title test
#ECHO ON
start "" /WAIT "C:\My CLI Tools\7zip\x64\7za.exe"
timeout /t 300
But both these will do nothing until it either times out, or you press any key.
If you were expecting output in cmd window, and the command actually provides output to cmd console, then you should not start it outside of the current console window. Just do:
#ECHO OFF
title test
#ECHO ON
"C:\My CLI Tools\7zip\x64\7za.exe"
pause
Does anybody know how to hide a console window (cmd), by just typing something into the console (not usbing VBS, batch-file or whatever), just using the cmd?
Is there a way to minimize it but still be able to type something?
Also heard of a possibility to just move the window out of your monitors size, does this work and if yes how?
You can start it minimized with start /min or start a new cmd minimized and close the old cmd start /min && exit but you loose the focus, you can't type commands in the minimized cmd, you need to klick it and bring it to front. You could execute a bat file with your commands (to execute them "invisible") start /min cmd.exe /C mybat.bat && exit
For "windows+r" (run) you can use: cmd.exe /C "start /min cmd"
I have scheduled a task to run a batch file, and currently every time the task executes, there is a command prompt box that flashes. This is very undesirable. The node.js command prompt window executes minimized correctly, it is the windows command prompt that flashes.
Here is the action that the scheduled task runs:
cmd /min /c "C:\Users\computeruser\Building Intelligence\javadobe\runCheck.bat"
and here is the contents of the batch file, (probably unnecessary to show, but I was originally trying to run these commands straight from the task scheduler. Putting them in this batch file instead has got me closest to what I actually want to happen: run a javascript file with node.js minimized):
cd "C:\Program Files (x86)\BuildingIntelligence\javadobe\" & START /MIN node index.js /exit
A list of the commands I've tried:
cmd.exe /c start /min "C:\Users\computeruser\Building Intelligence\javadobe\runCheck.bat"
cmd.exe /c start /min "C:\Users\computeruser\Building Intelligence\javadobe\runCheck.bat" & /exit
%comspec% /c start "" /min "C:\Users\computeruser\Building Intelligence\javadobe\runCheck.bat"
all of these commands leave the command prompt box open, not closing it but minimizing it after it opens. There is also a notification that says "not enough storage is available to process this command".
I need to run this task with the highest privileges, and while it needs to be invisible most of the time, it needs to be able to show a dialog box occasionally when the task is run.
Thanks in advance for any help!
Basically, if what you have tried doesn't work, you're going to need a third party tool. NirCMD should do it and it's freeware.
NirCMD exec hide "C:\Users\computeruser\Building Intelligence\javadobe\runCheck.bat"
At the bottom of this page there is a link for the download. This page covers what the tool is capable of.